Types of Tube Fittings and Applications

What is the difference between Tubes and Pipes? Pipes are majorly round, and Tubes are rugged and come in plenty of shapes. Tube fittings are the essential part of the tubes that need to add or curve the tube to specific directions. There are plenty of tube fittings that are used to connect and fix two or more tubes.

Tube fittings are applied in plenty of industries. Tube fittings are an essential part that functions in significant parts. Tube fittings are implied to connect tubes. The fittings must be specific, and component selection is a must. Tube fittings have plenty of applications, prominently in hydraulic and pneumatic systems. Here are some applications of tube fittings.

Hydraulic Application:

It is where the liquid is transferred, like water or chemicals. Tight sealing is required in fittings to prevent leakage and better material to avoid corrosion.

Pneumatic Application:

It is where gasses are transferred in tubes. The tube fittings must be tightly installed to prevent any leakage. The fitting must be resistant to the corrosive nature of the gas.

Types of Tube Fitting.

Various types of Tube Fittings are crucial in numerous industries. The attachment of tubes with two leading types, Compression fitting, and Threaded Fitting.

• Compression Fittings

Compression fittings connect tubes by using a gasket, ring, or ferrule. Compression is used to tighten the grip and have a fixed hold between two types securing the lines. The standard reduction doesn't require additional fittings, but they are very susceptible to high pressure. Contraction also defies heated substances, and proper tube fittings are required.

Mechanical Grip Fittings:

Mechanical grip fittings have two ferrule assemblies, one in front and another behind. The back ferrule holds the tub while putting pressure against the front ferrule. The spring-loaded front ferrule creates a seal between the tubing and the fitting body. The mechanical grip can be attained multiple times and is not permanent.

Bite-type fitting:

Bite-type fittings are compression-based fittings with a sharpened ferrule that presses the tube like a bite.

When compressed a seal is created to secure the tube components to flow flawlessly. No unique tool is used to fix the joint, and this fitting is not sturdy and better for high-pressure connection.

Flare Fitting:

Flare fitting has a body with a coned end. A unique flaring tool is used to fit the tube in the tapered end.

The small coned end tightens the seal and handles pressure with a broad range than standard compression fitting.