2026 TBB Portfolio Catalogue by InnoEnergy

EUROPE’S NEW INDUSTRIAL ERA

FROM TRANSITION TO COMPETITIVE ADVANTAGE

MUNICH, 28-29 OCTOBER THE BUSINESS BOOSTER 2026 EVENT EXHIBITORS CATALOGUE

TBB 2026

EVENT SPONSORS

SPONSORS

MEDIA PARTNERS

ENGAGEMENT PARTNER

InnoEnergy | TBB 2026

ENGIE AND AERONES Scaling Robotics for Safer and More Efficient Wind Turbine Maintenance As safety, performance, and asset reliability become increasingly critical in the renewable energy sector, ENGIE and Aerones are demonstrating how robotics can transform wind turbine inspection and maintenance. Aerones and ENGIE have been working closely together across Europe and North America, carrying out hundreds of robotic blade and lightning protection system inspections, as well as several leading-edge repair campaigns. Aerones, a Latvian startup backed by InnoEnergy, chose to partner with ENGIE because of its strong commitment to decarbonization, digital transformation, and operational excellence. For ENGIE, the partnership offers access to cutting-edge technologies that improve safety, reduce human exposure to risks, and optimize maintenance operations across its wind fleet. One of the key areas of collaboration has focused on addressing leading-edge erosion, a common issue affecting wind turbine blades. Caused by the repeated impact of rain and airborne particles, erosion gradually degrades blade surfaces, reduces aerodynamic performance, and can ultimately damage blade structures. Traditionally, repairs rely on rope-access technicians, suspended platforms, or cherry pickers—methods that are often time-consuming, weather-dependent, and costly. To explore a more efficient alternative, ENGIE has conducted field trials with Aerones at the Bétheniville (France) and Seymour Hills (USA)

wind farms. Aerones’ robotic repair system uses a winch-assisted robot equipped with specialized modules that perform grinding, cleaning, surface preparation, filler application, sanding, and protective coating installation directly on the blade. The results have been highly encouraging. At the Bétheniville wind farm, a 55-meter blade on a 2 MW turbine was repaired in approximately 30 to 35 hours, (versus 54-93 hours with conventional methods) while maintaining high-quality standards and detailed digital records of every intervention. The partnership builds on a relationship that began in 2017, when ENGIE first started evaluating Aerones’ technologies. Since then, the startup has expanded its portfolio to include blade and tower cleaning, advanced inspections, lightning protection system assessments, and specialized repairs. The collaboration continues to grow. New inspection and repair campaigns are planned across ENGIE’s wind portfolio in 2026, further strengthening the role of robotics in predictive maintenance strategies. The partnership was also showcased at Viva Technology 2026, where Aerones joined ENGIE on its booth. For both ENGIE and Aerones, this partnership demonstrates how advanced robotics can deliver tangible benefits: safer operations, improved asset performance, lower maintenance cost, and more sustainable wind energy production.

InnoEnergy | TBB 2026

OUR PORTFOLIO SPANS THE ENTIRE ENERGY VALUE CHAIN

ENERGY GENERATION

GRID & INFRASTRUCTURE

• • • • • • • • •

• Off-grid • Power DSO • Power TSO

Bioenergy & waste to energy Decarbonising the industry Hydrogen & e-fuels Nuclear fusion Ocean power Offshore wind Onshore wind Renewable gas & biofuels Solar PV

Clean technology startups InnoEnergy invests in early-stage clean technology startups and creates companies to meet unmet market needs. Our portfolio spans the entire energy value chain, from generation to end-user consumption. Learn more about our portfolio companies on the following pages.

ENERGY STORAGE

ENERGY CONSUMPTION

• Battery industry • Energy storage solutions • Transport & mobility

• • • • • • • • • • • • •

Battery industry Bioenergy & waste to energy Decarbonising the industry Energy storage solutions Hydrogen & e-fuels Non-residential building Off-grid Onshore wind Renewable gas & biofuels Residential buildings Solar PV Solutions for municipalities Transport & mobility

InnoEnergy | TBB 2026

HOW TO USE THIS CATALOGUE MARKET & PRODUCT CATEGORIES COMPANY NAME LOGO BOOTH #

QR CODE (COMPANY WEBSITE) CONTACT

COMMERCIAL STAGE

PRODUCT INFORMATION & CUSTOMER REFERENCES

UNITED NATIONS SUSTAINABLE DEVELOPMENT GOALS COMPLIANCE

ENERGY GENERATION

ACT Blade Limited............................44 Athena.................................................. 45 C-Green...............................................46 CorPower Ocean................................ 47 EasySolar AI........................................48 ecoligo..................................................49 Empyrio................................................50 Enosis....................................................51 Equinox................................................ 52 Feedgy.................................................. 53 FertigHy................................................ 54 Fibersail................................................ 55 FUTURE VOLTAICS............................. 56 Heliup................................................... 57 HoloSolis.............................................. 58 HSL Technologies..............................59 Hysun....................................................60

KERIONICS...........................................61 MEVA Energy....................................... 62 Midstrom............................................. 63 Minesto AB..........................................64 Nesetten.............................................. 65 Nexwafe GmbH..................................66 Nines PV............................................... 67 Novatron Fusion Group AB.............68 Phytonics GmbH................................69 Principle Power.................................. 70 Steadysun............................................ 71 ROSI...................................................... 72 SeaQurrent.......................................... 73 SUNWAFE............................................ 74 TFI Marine Limited............................ 75 VolagHy................................................ 76 X1 Wind................................................. 77

InnoEnergy | TBB 2026 MARKET

ONSHORE WIND

SUB MARKET

OFFSHORE WIND

PRODUCT

ACT BLADE

ACT Blade Limited BOOTH #

CLICK OR SCAN

Hill St 14-18, EH2 3JZ Edinburgh

United Kingdom actblade.com

s.malpede@actblade.com

THE LIGHTEST AND MOST CONTROLLABLE WIND TURBINE BLADE

Pilot

The need

Larger turbines with longer blades are a popular means to reduce levelised cost of electricity (LCOE) values. However, composite blades suffer from significantly increased weight and cost, increasing fatigue on other turbine components and raising the cost of installation.

The solution

The ACT Blade is a tensioned textile-covered wind turbine blade with a shape that can be actively changed to control loads. It is 24% lighter than conventional blades, enabling longer blades and directly contributing to the production of 9% more energy with a 7% reduction in the cost of energy. As they are component based, ACT Blades could result in additional manufacturing savings with 63% tooling costs and 40% factory footprint reductions.

Value proposition

Lighter, cheaper to produce and easier to transport, the ACT Blade is a leap forward in blade technology with real potential to increase the use of wind energy and displace the carbon emission of conventional power generation. Component based, they offer an opportunity to expand into remote zones contributing to local jobs and skills. ACT Blades modular manufacturing techniques are designed for a sustainable end-of-life approach.

Customer references Enel Green Power.

ENERGY GENERATION MARKET

HYDROGEN & E-FUELS

SUB MARKET

BIOENERGY & WASTE TO ENERGY

PRODUCT

HYDROGEN NEW VERSION

Athena BOOTH #

CLICK OR SCAN

3, rue Henri Perret, 49170 Saint Georges sur Loire

France

athena-recherche.fr contact@athena-recherche.fr

HYDROGEN DERIVED FROM A WASTE-TO-POWER SOLUTION

Early stage

The need

Sewage water must be cleaned in order to protect rivers and oceans. However, both chemicals and energy are required to do so. Organic materials contained in sewage water provide a source of energy for microorganisms, and a source of inspiration.

The solution An innovative solution aimed at sewage water producers, especially those in the food and drinks industry, transforms waste into hydrogen. It does so

via a dedicated bacterium that is capable of growing in sewage water and quickly producing high-quality hydrogen, cleaning the water. No longer a waste product, sewage water can be a source of local, clean, renewable and carbon-free energy.

Value proposition • A solution capable of creating local hydrogen ecosystems based on a circular economy. • Lower natural gas consumption for processing and transportation of raw materials (milk, cereals, etc).

• At least 60% reduction of energy required to clean sewage water. • At least 1,5 litres of hydrogen produced per litre of sewage water. • Hydrogen produced at a competitive price compared to fossil fuel energy (less than 5€/kg). • Provides a green image and brand for companies.

Customer references Available on request.

InnoEnergy | TBB 2026 MARKET

BIOENERGY & WASTE TO ENERGY

PRODUCT

HTC TECHNOLOGY FOR SLUDGE VALORISATION

C-Green BOOTH #

CLICK OR SCAN

Växlarevägen 31, 170 63 Solna

Sweden

c-green.se clement.prot@c-green.se

WE MAKE WET WASTE VALUABLE Starting sales

The need

Municipal and industrial sludge is a complex waste stream that is difficult to dewater and contains pathogens, contaminants, and valuable nutrients such as phosphorus. With tightening regulations and rising disposal costs, there is an increasing need for more sustainable sludge management solutions.

The solution

C-Green’s HTC technology converts wet sludge into a dry, sterile and inert carbon product, eliminating pathogens while significantly improving

dewaterability. The process is highly energy-efficient because it treats sludge in its wet state and integrates well with existing anaerobic digestion, creating strong synergies in wastewater treatment plants. In addition, the HTC system is compact and robust, enabling cost-effective and reliable sludge management.

Value proposition

• Reduces amount of waste by 5 times. • Turns harmful sludge into homogenous, sterile biofuel with a high energy density for power production.

• Facilitates recovery of nutrients. • Gives municipalities or sludge owners more flexibility in how to handle sludge. • Allows municipalities to anticipate changes in regulations. • Offers very relevant synergies with biogas production.

Customer references

• Industrial-scale demonstration HTC biorefinery at the Stora Enso packaging mill in Heinola. • C-Green is actively engaged in projects under development in Europe (The Netherlands, Scotland, Belgium, France), India.

ENERGY GENERATION MARKET

OCEAN POWER

PRODUCT

CORPACK

CorPower Ocean BOOTH #

CLICK OR SCAN

Västberga Allé 60, 126 30 Hägersten

Sweden

corpowerocean.com patrik.moller@corpowerocean. com

Pilot

The need

Commercially available wave energy constitutes ~500GW, which covers about 10 percent of global electricity consumption. Wave energy can be a balancing source that enables a high penetration of wind and solar at the lowest electricity system cost possible.

The solution

The CorPower Wave Energy Converter (WEC) can produce five times more electricity per tonne of the device (>10MWh / tonne) than any other known wave technology. It combines storm survivability with strongly amplified power capture in regular sea conditions. Obtaining large amounts of electricity from a small device significantly reduces capital expenses (CAPEX). The

WAVE POWER. TO POWER THE PLANET. compact lightweight devices are also less costly to transport, install and service, reducing operating expenses (OPEX).

Value proposition

• The world’s most efficient wave energy converter proven at sea. • Physics supporting highly competitive levelised cost of electricity (LCOE), verified through step-by-step approach. • Key enabler for the transition to 100% renewables, by natural grid balancing. • A dedicated, experienced team. • Market pull - sector leading customers engaging with the aim of developing utility and off-grid projects. • Offering attractive funding mix with high leverage on private equity invested.

Customer references

VianaWave - This 15 MW wave energy farm off the northern Portuguese coast will be the world’s first grid-connected wave energy array. It builds on CorPower Ocean’s pilot, running in Portugal since 2023, which has shown that its C4 device can generate electricity and withstand Atlantic storms with waves exceeding 18 metres. Valiant – A 5 MW wave energy array planned for deployment at the European Marine Energy Centre (EMEC) in Orkney later this decade. Expected to be the UK’s largest, it will feature 14 converters with significant local content, creating skilled jobs and strengthening domestic supply chains.

InnoEnergy | TBB 2026 MARKET

SOLAR PV

PRODUCT

EASYSOLAR

EasySolar AI BOOTH #

CLICK OR SCAN

Zwierzyniecka 3, 60-813 Poznan

Poland

easysolar.app marcin.dolata@easysolar-app. com

AI-POWERED SOLAR SOFTWARE Starting sales

The need

The solar industry suffers from chaos: installers waste hours on manual design, pricing and proposals across multiple tools. Customers wait days for quotes, and companies lose leads. There is no single intelligent system that accelerates PV sales and design in one streamlined workflow.

The solution

EasySolar AI is an all in one SaaS platform for the photovoltaic industry: 3D design, component selection, yield simulations, automated proposals and CRM combined in a single workspace. Artificial intelligence reduces proposal preparation time from hours to minutes, eliminates costly errors and increases sales conversion. Installers, sales teams and managers collaborate seamlessly, while customers receive professional, personalized offers within minutes instead of waiting days.

Value proposition

conversion and professionalizes your brand image. One platform replaces five separate tools, covering the entire journey from first customer contact through proposal, contract signing and installation. Our AI engine analyzes site data, recommends optimal configurations and generates compelling offers automatically. Scale your PV business without scaling your team, costs or operational complexity.

Customer references

400 clients (companies) from Poland, Spain, Germany and many others.

Sell more, design faster, earn better. EasySolar AI cuts quoting time by 80%, boosts lead

ENERGY GENERATION MARKET

SOLAR PV

PRODUCT

SOLAR-AS-A-SERVICE

ecoligo BOOTH #

CLICK OR SCAN

Prenzlauer Allee 7, 10405 Berlin

Germany

ecoligo.com hello@ecoligo.com

PIONEERING THE GLOBAL ENERGY TRANSITION

Consolidated sales

The need

Commercial and Industrial businesses are growing fast in emerging markets. This makes their need for access to cheaper and more sustainable clean energy more urgent. While solar energy appears to be the most beneficial option, the lack of financing options is an issue.

The solution

ecoligo offers commercial and industrial businesses in emerging markets access to clean and affordable solar-as-aservice solutions, fully financed as 20-year power purchase agreements (PPA’s). This enables businesses to lower their energy costs and gives them more time to focus on growth. ecoligo manages projects from start to finish, while tailoring each system to meet the specific needs of each business.

Value proposition

• Combining global reach and local expertise, ecoligo saves businesses money on electricity bills while also benefitting the planet. • A one-stop-shop for clean, affordable solar energy, the company handles everything from financing to installation and maintenance. • Guaranteed performance on tailor-made projects and significant lowering of energy costs. • Utilising an in-house developed ERP system to manage thousands of assets.

Customer references Available on request.

InnoEnergy | TBB 2026 MARKET

BIOENERGY & WASTE TO ENERGY

SUB MARKET

MUNICIPALITY

PRODUCT

COMPACT SYSTEM FOR WASTEWATER SLUDGE UTILISATION

Empyrio BOOTH #

CLICK OR SCAN

Brivibas iela 137B, LV-1012 Riga

Latvia

empyrio.com ab@empyrio.com

LOW-COST ONSITE SEWAGE SLUDGE SOLUTION FOR SMALL OR MEDIUM WASTEWATER TREATMENT PLANTS

Early stage

The need

Spreading sewage sludge on arable land pollutes the earth with heavy metals, microplastics and antibiotics. It also produces high methane emissions and odour or sanitation issues. Large scale incineration often requires long haul transportation and is subject to high gate fees.

The solution Empyrio offers a low-cost solution for small and medium cities of 20,000 to 200,000 inhabitants:

compact onsite sewage sludge utilisation systems for small and medium-size wastewater treatment plants. Ash from Empyrio sludge utilisation processes may be used for the recovery of phosphorus.

Value proposition

• Significantly lower costs compared to traditional utilisation methods (€150-220/t of dry solids). • Small volume utilisation (500+ t of dry solids per annum). • Three year payback period.

• Autonomous operation with no need for additional energy resources or raw materials. • Automated process with no additional personnel required. • Adapted even for 80% water content (high-moisture) sewage sludge utilisation. • Compact 20 and 40-foot containers allocation. Advanced flue gas treatment system. • Integration into existing treatment process.

Customer references Available on request.

ENERGY GENERATION MARKET

RENEWABLE GAS & BIOFUELS

PRODUCT

ENOBIO (BIOMETHANATION REACTOR)

Enosis BOOTH #

CLICK OR SCAN

12 rue Louis Courtois de Viçose Portes Sud, Bat. 3, 31100 Toulouse

France

enosis-energies.com vincent.guerre@enosis-energies. com

Starting sales

CO2/BIOGAS/SYNGAS CONVERSION SOLUTIONS TO PRODUCE RENEWABLE AND LOW-CARBON FUELS

The need

The company’s know-how covers the design, manufacturing and integration of units within host sites (methanisation, pyrolysis or gasification sites, and industrial sites), their connection to the grid and their operation and maintenance. Enosis also advances the development of territorial methanation projects and their financing.

The solution

Value proposition

To eliminate fossil fuels, renewable gases need to be upgraded in order to be injected into the gas grid. Biomethanation makes it possible to increase methane content by converting CO2, CO and H2 into methane, without requiring extra methanisable material and by achieving grid specifications.

Enosis designs and develops biological methanation units based on an innovative, sustainable biotechnology that includes associated control command.

• Increases production of renewable gas (by 55% to 100%), while preserving natural landscapes and agricultural areas.

• Recycles CO2 and reduces CO2 emissions (avoids fossil fuels such as natural gas). • Ensures the supply of renewable e-fuels (RFNBO). Stores renewable electricity surplus. • Low capital expenditure (CAPEX). • Low operating expenditure (OPEX).

Customer references

• SERGIES • CALCIA CIMENTS • ENGIE • SECHE ENVIRONNEMENT • GRDF /GRTgaz • JOHN COCKERILL

InnoEnergy | TBB 2026 MARKET

OCEAN POWER

PRODUCT

EQUINOX OCEAN TURBINES

Equinox Ocean Turbines BOOTH #

CLICK OR SCAN

François Haverschmidtwei 2, 8914 BC Leeuwarden

The Netherlands

equinoxoceanturbines.com pdh@equinoxoceanturbines.com

REAL BASELOAD POWER Early stage

The need

There is an increasing need for a reliable and predictable energy solution that benefits both people and planet. Harvesting energy from the ocean offers one such solution, however, it can be inefficient and costly, with devices insubstantial in design.

The solution EQOT is dedicated to providing a reliable, clean energy source through ocean current energy. It combines a unique turbine design with proven parts,

manufacturing techniques, and supply chains from the maritime industry. This enables a highly efficient capture of ocean current energy, maximising both power generation and earning potential.

Value proposition

• Simple and unique: harvests energy from low-velocity unidirectional ocean currents. • World’s third clean global energy source: 700GW+ potential.

Customer references Available on request.

• High-capacity factor (> 65%): provides affordable and clean baseload energy. • Competitive pricing: target LCoE sub € 50 / MWh. • Low risk solution: builds on proven elements such as an intrinsically stable construction. • Low- to zero environmental impact. • Not visible above the water. • Offshore energy technology made in the Netherlands.

ENERGY GENERATION MARKET

SOLAR PV

PRODUCT

FEEDGY

Feedgy BOOTH #

A10

CLICK OR SCAN

44, Rue Lucien Sampaix, 75010 Paris

France

feedgy.solar hdarras@feedgy.solar

MAKING SOLAR PLANTS MORE PROFITABLE FOR MUCH LONGER

Consolidated sales

The need

Solar plants suffer production losses over time. This can be due to undetectable degradation that may be unknown in origin. When monitoring is implemented, it may not take the various factors that lead to underperformance into account, nor calculate its financial cost.

The solution

Feedgy has developed effective repowering solutions for solar plants ranging from 100KWc to 10 MWc. Solutions include advanced digital tools that detect faults, optimise production, and assess repowering eligibility. Innovative technologies, including high-performance panels, optimised components, photonics, and

artificial intelligence, enhance the overall efficiency of the entire solar system.

Value proposition

• Up to 62% increase in energy production. • Extension of the lifespan of solar plants by 10 years. • Optimisation of profitability of solar assets with payback <5 years. • Premium support in all aspects of the project (legal, financial, insurance, etc.). • Innovative digital platform for performance monitoring. • High performance equipments. • Agri PV solutions.

Customer references

Lury sur Arnon (18) X 1,3 MW plant => 350 houses supplied with electricity; 79,8 T CO2 Reduction; +199K€ projected additional revenue per year. • Power before: 906 kWp • Power after: 1,3 MW+31% Carcassonne (11) 252,56 kWp plant => 69 houses supplied with electricity; 15,5 T CO2 Reduction; +51K€ projected additional revenue per year. • Power before: 229,64 kWp • Power after: 252,56 kWp+ 10% Albon (26) 661,30 kWp plant => 180 houses supplied with electricity ; 40,6 T CO2 Reduction. • Power before: 601,38 kWp • Power after: 661,30 kWp + 10%

InnoEnergy | TBB 2026 MARKET

HYDROGEN & E-FUELS

PRODUCT

FERTIGHY

FertigHy BOOTH #

A11

CLICK OR SCAN

Paseo de la Castellana 259D, piso 18, 28046 Madrid

Spain

fertighy.com

LOW-CARBON FERTILISER PRODUCTION TO ACCELERATE THE DECARBONISATION OF THE FOOD VALUE CHAIN

ja.delasheras@fertighy.com

Early stage

The need

There is an urgent need to decarbonise the agriculture sector, responsible for 10% of total GHG. However, this must be done in a way that ensures resilience against disrupted fertiliser supply chains while upholding sovereignty and security of supply for the agriculture industry.

The solution

FertigHy plans to build and operate several large-scale low-carbon fertiliser projects in the EU. The first plant is set to start construction in 2027 in France. The plants will produce 500.000 tonnes per year of low-carbon fertilisers, with the objective of reducing emissions by up to one million tonnes of CO2 per plant per year.

Value proposition

• Affordable low-carbon fertiliser produced with low-carbon electricity.

• Made in Europe using low-carbon hydrogen; no dependency on natural gas or imports. • Strong consortium of shareholders cover the complete value chain: InnoEnergy, RIC Energy, Siemens Financial Services, MAIRE, InVivo and Heineken. • Supported by the InnoEnergy Hydrogen Value Chain.

Customer references

Stategic partnerships: HEINEKEN, INVIVO

ENERGY GENERATION MARKET

ONSHORE WIND

SUB MARKET

OFFSHORE WIND

PRODUCT

FIBERSAIL SHAPE SENSOR

Fibersail BOOTH #

A12

CLICK OR SCAN

Stationsplein 45, 3013 AK Rotterdam

The Netherlands fibersail.com

carlos.oliveira@fibersail.com

CREATING VALUE WITH SMART BLADES

Starting sales

The need

Large wind turbine blades show increasing failure rates. Undetected damages can quickly propagate and lead to soaring repair costs, lengthy turbine downtimes and even blade failures. Some owners report several million euros worth of losses each year due to lower productivity and high repair costs.

The solution

Fibersail offers a unique blade condition monitoring system that detects damages at an early stage and provides alerts to owner/operators of wind farms. Our highly-sensitive shape

sensor mounted inside the blade monitors blade deflection and natural frequency variation. When damage occurs an instant alert is transmitted through our dashboard. Owners / operators can then act swiftly, preventing blade failure and radically reducing repair costs.

Value proposition

• Highly-sensitive detection of early damage inside the blade. • Accurate assessment of remaining lifetime. • Increased AEP through shorter repair duration, and additional pitch and yaw optimisation.

Customer references

Naturgy, Feb 2025, Spain, Piloting 4 WT’s with high blade failure rates. Nadara, 2023, Portugal, Monitoring loads on 3 WT’s and provide lifetime assessment. Totalenergies, May 2025, UK OffshoreFloating wind Turbine, monitoring loads, deflections and frequency variations due to floater motions. ERG, Dec 2024, Italy, Holistic structural health monitoring on 2 WT’s, preventing blade failures. Siemens Gamesa, 2023, DenmarkPiloting shape sensor on 8 Mw offshore Turbine.

InnoEnergy | TBB 2026 MARKET

SOLAR PV

PRODUCT

VECTHOR

FUTURE VOLTAICS BOOTH #

A13

CLICK OR SCAN

Avenida Real de Pinto 162, Nave N3, 28021 Madrid

Spain

futurevoltaics.com manuel.hinojosa@futurevoltaics. com

MORE POWER WHEN IT MATTERS Starting sales

The need

PV systems overproduce power at noon in the warmer months, and underperform at sunset, sunrise and during winter. There is a need to flatten the solar energy production curve and align electricity demand with generation. This would minimise grid stress and reduce reliance on energy storage systems.

The solution

VECTHOR is an innovative photovoltaic system that utilises vertical bifacial solar panels, along with patented engineered reflectors. This enables it to increase power output irrelative of radiance conditions. The technology maximises the overall annual energy yield of the plant (kWh/kW) and reduces the cost of electricity (LCOE). It additionally optimises energy production when the price of electricity tends to be higher: at sunrise, sunset, in cloudy weather and in winter.

Value proposition

• Increases power output in all conditions. • Maximises annual energy yield of the plant. • Reduces electricity cost. • Optimises energy production at costly times of the day or year.

Customer references

We have entered the market with sales to a major solar tracker manufacturer, water utility companies and infrastructure firms.

ENERGY GENERATION MARKET

SOLAR PV

SUB MARKET

NON-RESIDENTIAL BUILDING

PRODUCT

HELIUP STYKON®

Heliup BOOTH #

A14

CLICK OR SCAN

Chemin de la Plaisse 830, 73370 LE BOURGET-DU-LAC, Auvergne Rhône-Alpes

France

heliup-solar.com/en m.joanny@heliup-solar.com

LIGHT AND DURABLE PV PANELS Starting Sales

The need

Solar’s potential contribution to the total electricity mix is around 25%. However, over 80% of commercial and industrial buildings cannot support the weight of standard solar panels on their roofs. Current solutions are unsuitable due to the insufficient durability of polymer or its composites.

The solution HELIUP produces lightweight solar PV modules suitable for the large flat rooftops of commercial and industrial buildings. This

innovative technology has been developed at CEA and provides an insurable, reliable and efficient solar PV solution compatible with buildings with load limitations.

Value proposition • Low weight thanks to thinner glass: 5kg/m2 (2 to 4 times lighter than standard panels at 12 to 20kg/m2). • Long lifetime thanks to glass: equal to that of standard panels with 12 years of product warranty, 25 years of production warranty.

• Same total cost as standard panels (including mounting time). • Quick and easy installation: at least twice as fast installation time (mounting of PV panel on top of the roof): <1 min/ module.

Customer references

• Soprasolar • E.N.R. SOLAR by Groupe IDEC • Strategic partnerships

InnoEnergy | TBB 2026 MARKET

SOLAR PV

PRODUCT

HOLOSOLIS

HoloSolis BOOTH #

A15

CLICK OR SCAN

5, rue du Louvre, 75001 Paris

France

holosolis.com laurent.bodin@holosolis.com

THE OPERATING PLATFORM FOR RES AND BESS OPTIMIZATION

Early stage

The need

China is currently responsible for 80% of the world’s installed photovoltaic modules – compared to just 3% in the European Union. At a time where energy security is high on the agenda, there is a need to significantly increase Europe’s solar capacity.

The solution

Holosolis plans to build Europe’s largest PV module gigafactory which will be located in Sarreguemines, France. The factory will have a production capacity of 5GW per year, producing 10 million photovoltaic modules annually. It will employ 1,700 people. Holosolis will accelerate Europe’s solar capabilities to ensure and prioritise energy security on the continent.

Value proposition

• Production of the most reliable, high powered solar modules in Europe. • Lowest carbon footprint and best social footprint possible. • Dynamises Europe’s industrial rebirth and Europe’s energy self-reliance.

Customer references Available on request.

ENERGY GENERATION MARKET

HYDROGEN & E-FUELS

PRODUCT

HYDROSIL

HSL Technologies BOOTH #

A16

CLICK OR SCAN

Avenue Louis Philibert Technopole de l’environnement de l’Arbois Bâtiment Lavoisier, 13100 Aix en Provence

France

THE FIRST LIQUID INORGANIC HYDROGEN CARRIER THAT MAKES HYDROGEN EASY TO DELIVER

hsl.tech bmoreno@hysilabs.com Pilot

The need

Hydrogen is a clean alternative to fossil fuels. However, it is difficult to transport and store. It requires either very high pressure, or very low temperatures, and is also limited by strict regulations. A new way of transporting and storing the promising energy carrier needs to be deployed.

The solution

Hydrosyl is the first liquid inorganic hydrogen carrier that can transport and store the molecule at ambient temperature and pressure, via the existing infrastructures and for long periods of time. In addition, there’s energy input needed at the moment of unloading the hydrogen from the carrier, so the energy can be transported from wherever it’s available. This carrier is environmentally-friendly, as Hydrosil is silicon-based, amounting to the first completely zero-carbon value chain.

Value proposition

• Liquid hydrogen carrier, stable at ambient temperature and pressure. • Non-organic (silicon-based). • High hydrogen density (8.7% by weight). • Possible to transport and store it in the existing infrastructures (similar to gasoil on handling). • Recommended for: massive amounts of hydrogen, long-distance transport. • Release process with no energy input required.

Customer references

• Available on request. • Partnerships and projects: North Sea Port, HHLA, Ponant, Hélion.

InnoEnergy | TBB 2026 MARKET

HYDROGEN & E-FUELS

PRODUCT

HYSUN

Hysun BOOTH #

A17

CLICK OR SCAN

Rua da Xesta, Parque Industrial Novo Milladoiro 78-A2, 15864 Ames-A Coruña, Galicia

Spain

100% CLEAN AND LOW-COST HYDROGEN OBTAINED BY A PHOTOTHERMO CATALYTIC PROCESS FULLY OFF-GRID

h2hysun.com t.lopez@h2hysun.com

Pilot

The need

There is an urgent demand for 100% clean hydrogen, mitigating greenhouse gas emissions and battling climate change. The solution must have the goal of zero carbon emissions and no critical materials used, and outperform traditional methods while remaining cost-competitive.

The solution

The Hysun hydrogen solution is obtained from a disruptive process using a photo-thermo catalytic process that combines a unique patent protected catalyst with proprietary Solar Concentration Technology. STH (solar to hydrogen) efficiencies of 21% / 42% are achieved, significantly more than the usual 11% for photovoltaic-powered electrolysers.

• A carbon footprint up to 4 times smaller than equivalent PV-electrolyser plants, at half the OPEX and CAPEX. • Much lower water consumption. • Perfectly adaptable to isolated environments (off-grid). • The process utilises only non-critical materials, avoiding both scarcity and geopolitical challenges.

Customer references Available on request.

Value proposition

• 100% clean hydrogen at highly competitive prices (1-3 €/kg).

ENERGY GENERATION MARKET

HYDROGEN & E-FUELS

PRODUCT

KERIONICS

KERIONICS BOOTH #

A18

CLICK OR SCAN

Ronda Auguste y Louis Lumière 2-4, 46980 Paterna, Valencia

Spain

kerionics.com rrihouet@kerionics.com

HIGHLY EFFICIENT AND COST EFFECTIVE ELECTROLYSERS

Pilot

The need

The EU targets an ambitious production rate of 100 GW of green hydrogen by 2030, with 40% produced by Europeanmade electrolysers.

The solution

High-temperature electrolysis (SOEL) is a technology based on 20 years research and development into solid oxide cells. It offers both high efficiency values (95%): 28-40 kWh/kgH2 and a large amount of H2 generated

per kWh. The incorporation of SOEL technology in the industry enables waste heat to be used to generate H2 with an efficiency level of near 95%, thereby diminishing the cost of H2 (€/kg H2) through decreased electricity consumption (OPEX) and plant expenses (CAPEX).

Value proposition

• CAPEX reduction for clients due to reduction of stack manufacturing costs through mass production technologies.

• Reduction in parts required for assembly and lower MEA costs. • Proprietary electrode improves the OPEX and CAPEX of the stack by reducing electrical resistance and lowering operational temperatures. • Low-cost and reduced energy consumption. • Safe, reliable and convenient.

Customer references Available on request.

InnoEnergy | TBB 2026 MARKET

BIOENERGY & WASTE TO ENERGY

PRODUCT

MEVA ENERGY

MEVA Energy BOOTH #

A19

CLICK OR SCAN

Backa Bergögata 18, 422 46 Hisingsbacka

Sweden

mevaenergy.com kristoffer.lorentsson@ mevaenergy.com

MAKING IT POSSIBLE TO REACH BELOW NET-ZERO

Starting sales

The need

When addressing the need for industrial-sized cogeneration or combined heat and power (CHP) from solid biomass, today’s paradigm is either to build largescale power plants (larger than 10 MWe) using steam turbine CHP technology, or to burn the feedstock in a boiler, which only produces heat.

The solution

Meva Energy’s solution is to enable power and heat production in the range below the commercial feasibility of steam turbine technology. The plant is based on biomass gasification and, in particular, on the utilisation of fine fraction feedstock. The technology is

suitable for industrial application, and can utilise feedstock residue from wood-based manufacturing or agriculture to create a local, circular energy system with minimised transportation and distribution losses.

Value proposition

• Acceptance of fine fraction, low-cost feedstock. • Highly controllable power source able to balance power grids due to the intermittence of solar and heat. • Low cost, high-efficiency production of renewable, decentralised power and heat. • Production of even gas quality with high energetic content, suitable for a high efficiency lean-burn gas engine.

• Relatively non-complex system layout, low pressure and temperature.

Customer references

• Demo plant, industrial scale (1,2MWe,2,4MWth) erected for Pite Energi (Sweden). • CHP unit with 2,4MWe and 4,8MWth to be erected for furniture producer IKEA Industry (Poland) where waste MDF dust will be used as feedstock. • Renewable gas unit of 4,2MWgas to be erected for tissue producer Sofidel (Sweden) replacing fossil LPG for tissue drying. Commissioned in 2023.

ENERGY GENERATION MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

HYDROGEN & E-FUELS

PRODUCT

BIOGENIC CO2

Midstrom BOOTH #

A20 CLICK OR SCAN

c/o InnoEnergy, Torsgatan 11, 111 23 Stockholm

Sweden

midstrom.com jeremiah.dutton@innoenergy.com

MAKING BIOGENIC CO2 AVAILABLE AT SCALE

Early stage

The need

EU eSAF mandates will require 1.2% sustainable aviation fuel from 2030, increasing to 35% by 2050. Meeting this demand requires a large, reliable supply of biogenic CO₂ – the key carbon feedstock for e-fuels. Today, there is no functioning supply chain at scale. European pulp and paper mills emit ~100 Mt of biogenic CO₂ annually, yet virtually none is captured. Most mills lack the capital, technical capability, and market access to develop carbon capture infrastructure independently, while eSAF producers face a critical feedstock bottleneck that limits project bankability.

The solution

Midstrom is Europe’s first dedicated biogenic CO₂ midstream company. We design, build, own, and operate carbon capture and liquefaction systems at pulp and paper mills, and manage downstream logistics via rail to e-fuel producers and permanent storage sites. Our build–own–operate model removes complexity for industrial emitters while enabling long-term, contracted CO₂ supply for offtakers. All deployed technologies are commercially proven (TRL 9), ensuring industrial reliability from day one.

Value proposition

For pulp and paper mills: New revenue from an existing biogenic CO₂ stream, with no upfront investment, technical burden, or operational risk.

For eSAF and eFuel producers: Bankable, EU-compliant biogenic CO₂ supply at industrial scale – unlocking project finance by removing feedstock uncertainty. For CDR and storage operators: Aggregated, high-quality biogenic CO₂ streams enabling scalable carbon removal credits under emerging EU certification frameworks. For investors: A first-mover infrastructure platform in a policy-driven CO₂ market, scaling with EU fuel and carbon removal mandates. Contracted, infrastructure-backed cash flows with a repeatable rollout model across 100+ industrial sites.

Customer references Available on request.

InnoEnergy | TBB 2026 MARKET

OCEAN POWER

PRODUCT

RENEWABLE ENERGY - TIDAL STREAMS & OCEAN CURRENTS

Minesto AB BOOTH #

A21

CLICK OR SCAN

J A Wettergrens gata 14, 42130 Västra Frölunda

Sweden

minesto.com sales@minesto.com

LIGHTWEIGHT, SCALABLE, MODULAR POWER PLANTS WITH PROVEN COST EFFICIENCY

Starting sales

The need

Traditional tidal energy technologies have high capital and operational costs due to heavy infrastructure, specialised vessels and complex installation processes, causing them to be uncompetitive when compared to other renewables.

The solution

Lightweight, scalable modular power plants that generate electricity from low-flow tidal streams and ocean currents. Minesto’s ‘Dragon Class’ product line works on a unique, patented principle: the subsea kite is designed to glide across the main flow direction, with

electricity produced several times greater than that of a stationary turbine. It can be installed where no other known technology can operate cost efficiently, providing the energy mix with a 100% predictable baseload.

Value proposition

• Unique tidal energy technology that ‘flies’ underwater. • Electricity produced several times greater than that of a stationary turbine. • Affordable to install, operate, and maintain. • Expands the global extractable potential of tidal and ocean currents.

Customer references

Collaborating with local electric utility company Sev, Minesto is working to pave the way for tidal energy to become a core part of the Faroese energy mix. Minesto and SEV have a collaboration agreement including a power purchase agreement, through which Sev commits to purchase the electricity generated by Minesto’s tidal kite systems. To support the Faroe Islands’ vision for a sustainable energy system, Minesto has developed a 200MW-plan for large-scale buildout of tidal energy arrays in the Faroe Islands, supplying the country with 40% of their growing electricity consumption.

ENERGY GENERATION MARKET

RENEWABLE GAS & BIOFUELS

SUB MARKET

OFF GRID

PRODUCT

NESETTEN CRYO-BULK

Nesetten BOOTH #

A22 CLICK OR SCAN

Ringstraße 4, 18059 Papendorf, MecklenburgWestern Pomerania

Germany

nesetten.com

NANO-SCALE CRYOGENIC BULK: A GAME-CHANGER FOR (BIO-) LNG

info@nesetten.com

Early stage

The need

There is a need for suitable technology to unlock the untapped potential of the nano-scale (bio-) LNG market. This hinders its ability to offer an eco-friendly, cost-effective alternative that ensures energy access in off-grid areas, for example, and can also lead to reduced economic growth.

The solution

Nesetten’s products are dedicated to unlocking solutions for the use of bio-LNG and LNG on a micro- and nano-scale that offer eco-friendly alternatives for decentralised energy supply systems. Nesetten’s primary focus is the cutting-edge manufacturing of 2nd-generation

cryogenic micro bulks, capable of storing liquids at temperatures as low as -196 °C. Its revolutionary construction allows the company to pioneer steel- and vacuum-less bulks, enhancing safety and design flexibility.

• Promotes sustainability and long-term growth with greenready technology adaptable to various cryogenic liquid fuels. • Ensures energy independence and fosters economic growth.

Customer references

Value proposition

• Redefines the energy paradigm with groundbreaking nanoscale technology. • Focused on LNG and bio-LNG, this innovative system empowers energy access in off-grid regions and emergencies. • Users effortlessly meet lower energy demands through flexible storage and distribution solutions.

Ongoing LOI and MOU for collaborations with Eurotec Engineering Corporation Pvt. Ltd. (India), Crowley LNG, Inc (USA), Timex S.A. (Poland), Polaris Marine and Offshore Support Services Limited (Nigeria), Rural Electrification Agency (Nigeria), and Viessmann (Germany). These agreements form the basis for our joint “go-to-market” strategy and collaborative projects aimed at testing and validating our products and solutions.

InnoEnergy | TBB 2026 MARKET

SOLAR PV

PRODUCT

EPIWAFERS

Nexwafe GmbH BOOTH #

A23 CLICK OR SCAN

Hans Bunte Strasse 19, 79108 Freiburg im Breisgau

Germany

nexwafe.com info@nexwafe.com

ADVANCED EPITAXIAL SILICON WAFERS FOR SPACE AND TERRESTRIAL SOLAR APPLICATIONS

Pilot

The need

Silicon wafers are the most expensive and energy intensive single component of a solar module. Current wafer manufacturing processes have a very limited cost reduction potential. Disruptive technologies are needed to bring costs and energy consumption down.

The solution

Conventional wafer production uses energy intensive processes such as polysilicon production

from chlorosilane, ingot pulling and wire sawing. NexWafe bypasses these process steps by cloning silicon wafers; growing wafers directly from chlorosilane by epitaxy. In-line equipment has been developed to achieve high throughput in production. This disruptive approach to wafer manufacturing reduces energy consumption and GHG emissions in wafer production by 60%, and cuts production costs by half.

Value proposition

• Reduced power consumption and CO2 emission in wafer production. • Cost savings. • High solar cell efficiencies.

Customer references

Strong interest from leading solar cell producers to test NexWafe’s wafers.

ENERGY GENERATION MARKET

SOLAR PV

PRODUCT

DEEP TECH | ADVANCED MANUFACTURING

Nines PV BOOTH #

A24 CLICK OR SCAN

Synergy Centre T.U. Dublin, Tallaght Campus, D24 A386 Dublin

Ireland

nines-pv.com

HIGHLY EFFICIENT, LOW COST AND WATER FREE: REDEFINING SILICON BASED MANUFACTURING WITH THE PROPRIETARY ADE ETCHING PLATFORM

info@nines-pv.com

Pilot

The need

Solar cell Gigafactories required for the energy transition pose an environmental challenge. Wet etching technologies require high water consumption and process inefficiently. Large numbers of very long machines are required and take up significantly more factory space.

The solution

ADE is a high efficiency/low cost dry etching technology. Its very high etching rates enable Gigafactory throughputs, small machine size and reduced water

impact. Unlike existing dry processes such as RIE, developed for the semi-conductor industry, the ADE process does not require costly vacuum or plasma equipment and emits no greenhouse gases. ADE is a single side process, enabling the latest solar cell architectures such as TOPCON and IBC.

Value proposition

• High throughput capacity = less tools required per GW of factory capacity. • Small tool footprint = reduced number of tools, factory size and associated costs and CO2.

• No water usage, no GHG = sustainable PV manufacturing. • On-site gas generation = scalable manufacturing. Single side and selective etching = enables newest cell architectures like TOPCON and IBC. • Patented European innovation.

Customer references

Fraunhofer ISE - 2015 - Freiburg, Germany1 x R&D pilot machine ADE100. Fraunhofer ISE - 2023 - Freiburg, Germany1 x R&D pilot machine ADE100 for M10/G12 wafers.

InnoEnergy | TBB 2026 MARKET

NUCLEAR FUSION

PRODUCT

NOVATRON

Novatron Fusion Group AB BOOTH #

A25 CLICK OR SCAN

Missionsvägen 12, 16733 Bromma

Sweden

novatronfusion.com peter.roos@novatronfusion.com

CAPITAL-EFFICIENT FUSION POWER TO THE GRID

Early stage

The need

The global demand for energy is rising rapidly, making the shift from dependence on fossil fuels or waste-generating nuclear fission power an enormous challenge. Renewable energy sources, such as wind and solar, are important but cannot yet provide the reliable energy source we need.

innovative reactor solution for stable magnetic plasma confinement—has been theoretically and numerically demonstrated to minimise problems with plasma instabilities that have obstructed the commercial advancement of fusion power. The first reactor is being developed by leading physicists, engineers and academics in Stockholm, Sweden.

Value proposition

The solution

Fusion power has the capacity to provide a limitless supply of clean, reliable and affordable energy for generations to come. The NOVATRON concept—an

• Safe, with no long-term radioactive waste and accompanying disposal problems; no risk of catastrophic failure. • No carbon emissions.

• High energy efficiency. • Low cost. • Reliable base power. • Abundant fuel supply. • Streamlining of nuclear engineering and reduction of the current capital and operational cost of future fusion reactors in process.

Customer references Strategic partnerships:

• KTH Royal Institute of Technology (Sweden) • Studsvik (Sweden) • Freemelt (Sweden) • St1 (Finland) • Granitor (Sweden)

ENERGY GENERATION MARKET

SOLAR PV

PRODUCT

PHYTONICS

Phytonics GmbH BOOTH #

A26 CLICK OR SCAN

Albert-Nestler-Straße 8, 76131 Karlsruhe

Germany

phytonics.com info@phytonics.tech

ANTI-GLARE FILM FOR SOLAR PANELS. ENABLING PV AROUND AIRPORTS AND SENSITIVE AREAS.

Starting sales

The need

Solar modules can reflect light to cause glare issues, impacting driver and pilot safety, annoying neighbours, and blocking rooftop or dual-use land approvals. Customers face costly delays or outright bans without effective low‑glare solutions.

The solution

Phytonics has developed a self-adhesive, weather-resistant film with a micro-textured

surface that eliminates glare, even at low sun angles where conventional solutions fail. The UV-stable polymer layer can be laminated onto new or existing solar panels. It has passed tests for hail, heat, UV, and humidity and is built to perform reliably for over 25 years.

Value proposition

• Enables glare-free solar installations in sensitive areas like airports, roads, and rooftops, unlocking up to 300 GW of potential in the EU.

• Can be applied to both new and existing solar panels and is flexible for retrofitting or integration during production. • Proven durability, weather- and UV-resistant for over 25 years, with certified performance in hail, heat, and humidity tests.

Customer references Available on request.

InnoEnergy | TBB 2026 MARKET

OFFSHORE WIND

PRODUCT

PROVEN FLOATING WIND

Principle Power BOOTH #

A27 CLICK OR SCAN

2200 Powell St. Suite 950, 94608 Emeryville, USA

United States

principlepower.com info@principlepowerinc.com

COST-EFFICIENT UTILITY-SCALE DEPLOYMENT

Consolidated sales

The need

Principle Power draws on accumulated knowledge from 105 MW of projects in operation, access to a global supply chain ecosystem, and WindFloat’s modular architecture to remove the cost, schedule and interface management uncertainty that challenges investment decisions from the earliest design stages.

operation (the 25 MW WindFloat Atlantic in Portugal, and the 50 MW Kincardine Offshore Wind Farm in Scotland) and 30 MW installed (EFGL in France), the technology has proven resilient in the challenging Atlantic and North Sea weather conditions, delivering more than 1 TWh of clean energy since WindFloat 1 was installed in 2011.

Value proposition

The solution

The WindFloat® portfolio consists of four modular platform technologies optimized for turbines above 15MW and suitable for any supply chain setup. With 75 MW capacity in

Principle Power is a global leader in floating wind technology, providing full lifecycle engineering services that deliver reliable, de-risked, and bankable solutions.

Principle Power combines dedicated expert teams, validated design tools, and proven processes that have been refined based on real-world operational experience providing confidence from the earliest design phases.

Customer references

Lightweight, modular and standardized floating wind platforms that are cost-efficient and have proven bankability and performance. Dedicated expert teams, validated design tools, and proven processes that have been refined based on realworld operational and execution experience providing confidence from the earliest design phases.

ENERGY GENERATION MARKET

SOLAR PV

SUB MARKET

ONSHORE WIND

PRODUCT

SOLAR AND WIND ENERGY FORECASTS

Steadysun BOOTH #

A28 CLICK OR SCAN

Savoie Technolac, BP 40328, 73377 Le Bourget-du-Lac CEDEX

France

steady-sun.com caroline.deforeit@steady-sun.com

Consolidated sales

The need

Solar power is highly variable—a cloud can cut output by 80% in minutes. Accurate forecasts are essential to integrate PV into grids and markets, optimise revenues, reduce penalties, support trading and maintenance, and ensure grid stability at a lower cost.

The solution

Steadysun provides ultra-accurate solar forecasts from a few minutes up to 15 days ahead, updated every 5 minutes and down to a 1-minute time step.

ACCURATE SOLAR POWER GENERATION FORECASTS Combining SteadyMet’s multimodel approach (20+ global NWP models and AI algorithms) with SteadySat’s real-time satellite imagery, our forecast solution anticipates solar power fluctuations with confidence and reliability.

Value proposition

• Better anticipates production variations. • Maximises energy yield. • Anticipates the volatility of prices. • Maintains grid stability. • Significantly reduces costs.

Customer references • TotalEnergies • Juwi • ENGIE • EDF • REE • Gesternova • CEA • SPIE • Entech • Naldeo • EDT • Valeco • MVM • GDSolar

InnoEnergy | TBB 2026 MARKET

SOLAR PV

PRODUCT

TECHNOLOGY TO RECYCLE RAW MATERIALS

ROSI BOOTH #

A29 CLICK OR SCAN

14, rue Henri Dunant, 38180 Seyssins

France

rosi-solar.com

REVALORISING SILICON FROM PRODUCTION AND PRODUCT WASTE TO CONTRIBUTE TO A CIRCULAR ECONOMY IN PV

damien.letort@rosi-solar.com

Starting sales

The need

product from the production of solar wafers, or from solar modules at the end of their life. What was once considered waste is reintegrated back into its original PV production value chain, activating a circular economy for the PV industry.

The solution

Value proposition

As an active material for PV, purified silicon (with a purity of 99.9999%) is currently obtained through a laborious process which is both energy-intensive and emits a significant amount of CO2.

ROSI offers a complete and innovative solution for recycling and revalorising silicon. It does so either from “kerf”, a waste

Customer references Partners:

• Revalorisation of raw materials for recycling companies, including silicon and silver from end-of-life modules.

• Lower production costs for PV panels and PV silicon producers. • A treatment capacity of 3,000 tonnes of photovoltaic panels from 2023 set to reach 50,000 tonnes by 2027.

• Soren • Evonik • Veolia • Envie

ENERGY GENERATION MARKET

OCEAN POWER

PRODUCT

TIDALKITE™ SYSTEM

SeaQurrent BOOTH #

A30 CLICK OR SCAN

Tussendiepen 18, 9206 AD Drachten

The Netherlands seaqurrent.com

info@seaqurrent.com

TIDAL ENERGY. FOR GOOD. Early stage

The need

TidalKite™ complements intermittent renewables in the energy mix contributing to the transition to 100% carbon-free energy. It provides higher energy revenues per kWh, produces baseload power, ensures energy security, overcomes spatial limitations, and minimises grid congestion.

The solution

The patented TidalKite 3D-harnessing design captures up to 3x more energy than conventional tidal turbines, doubling market potential by enabling deployment in all

tidal segments. Its lightweight, scalable design allows towing by standard vessels, use of widely available equipment, easier installation, onshore maintenance, and significantly lower costs. The design is eco-friendly and 100% recyclable.

Value proposition

• Strong EU regulatory support and national financial incentives: governments provide significant funding and guaranteed prices for tidal projects. • Initial TidalKite projects, structured as ESCO-SPC ventures, are anticipated to generate revenues by 2026 with a

healthy gross margin, growing from 2030 due to increasing volumes and cost efficiencies. • Planned transition into a sales and R&D company, selling units and outsourcing manufacturing. • Positioned to lead the growing tidal energy market, investors are offered substantial returns aligned with energy transition goals.

Customer references Strategic Partnerships:

• AEC (Amelandse Energie Cooperatie) • NAM (JV tussen Exxon en Shell).

InnoEnergy | TBB 2026 MARKET

SOLAR PV

PRODUCT

SILICON WAFERS FOR THE PHOTOVOLTAIC SECTOR

SUNWAFE BOOTH #

A31

CLICK OR SCAN

Edifici Nexus II, Jordi Girona 29, 08034 Barcelona

Spain

sunwafe.com/ michael.pinto@sunwafe.com

BUILDING A NEW GENERATION OF SUSTAINABLE INGOTS AND WAFERS FOR PV

Early stage

The need

Sunwafe is addressing a critical market need in the solar photovoltaic (PV) industry: the re-industrialisation of wafer manufacturing in Europe, which currently lacks domestic production capacity for this essential component.

The solution

High-end wafers for top-of-therange photovoltaic cells used for TOPCon and heterojunction (HJT) technologies. Standard formats include M10, G12, and G12R with thicknesses from 150μm to 120μm. Sunwafe also produces silicon crystal ingots for in-house wafer fabrication.

Value proposition

• Critical focus on ingot and wafer manufacturing essential in the photovoltaic value chain. • High-purity silicon processed into wafer-thin slices for solar cells. • Maximum precision and minimal material loss. • Highly-efficient process that reduces production costs.

Customer references Available on request.

ENERGY GENERATION MARKET

OFFSHORE WIND

PRODUCT

THE SEASPRING®

TFI Marine Limited BOOTH #

A32 CLICK OR SCAN

Commissioners of Irish Lights, Headquarters, Harbour Road, A96 H500 Dun Laoghaire, Dublin

Ireland

tfimarine.com

INNOVATING THE DESIGN OF MOORING SYSTEMS

paul.mcevoy@tfimarine.com

Starting sales

The need

Floating offshore wind unlocks vast clean-energy resources in deep water and harsh ocean environments. However, traditional mooring systems drive high loads, material demand and complex offshore installation. These costs increase LCOE and slow the deployment of projects essential to global decarbonisation.

The solution

The SeaSpring® is TFI Marine’s patented, DNV- and ClassNKcertified load and fatigue reduction technology. Installed into the mooring lines of floating offshore wind and offshore energy projects, The SeaSpring® reduces loads and fatigue throughout the mooring system.

This enables smaller, lighter and less carbon-intensive mooring systems, eliminating thousands of tonnes of steel while reducing component costs, installation requirements and lifecycle emissions.

Value proposition

Reduce Costs Up to US$200 million in savings per 500 MW project. • Reduces project CAPEX by up to US$200 million across a 500 MW, 33-turbine development. • Reuces the number, size and cost of mooring lines, anchors, chains and associated components. • Cuts installation time, vessel requirements, lifecycle OPEX. • Lowers LCOE, making floating offshore wind competitive with other renewable technologies.

Environmental and Decarbonisation Impact Decarbonisation by design • Accelerates the commercial deployment of floating offshore wind at global scale. • Reduces steel, synthetic rope and anchor requirements, lowering embodied carbon. • Cuts installation vessel days, fuel consumption and associated emissions. • Reduces the mooring system’s seabed footprint and environmental disturbance. • Unlocks clean-energy generation in deep-water and harsh ocean markets.

Customer references

Naval Energies; Principle Power.

InnoEnergy | TBB 2026 MARKET

HYDROGEN & E-FUELS

PRODUCT

ESAF

VolagHy BOOTH #

A33 CLICK OR SCAN

Microkatu 1 A, PL1188, 70211 Kuopio

Finland niklas.willemsen@innoenergy.com

SAF AT SCALE. DRIVEN BY DEMAND, BUILT TO COMPETE.

Early-stage

The need

The aviation sector faces a critical challenge to decarbonize, with limited scalable and cost-competitive solutions available today for sustainable aviation fuels (SAF). At the same time, large industrial CO₂ emitters and renewable power producers require viable pathways to monetize their assets within a low-carbon economy. There is therefore an urgent need for bankable, largescale eSAF projects that can integrate renewable electricity and sustainable carbon sources into commercially viable fuel production.

The solution

VolagHy develops industrial-scale eSAF plants based on proven pathways such as methanol-to-jet, integrating renewable electricity, biogenic CO₂, and strong industrial partnerships. The ventures focus on the Nordic region because of the attractive costs of green baseload power as well as abundant supply of biogenic CO₂. Starting with a first-of-a-kind flagship project in Kuopio Finland, VolagHy establishes a blueprint designed for replication across multiple sites.

Value proposition

VolagHy offers a highly de-risked, cost-efficient eSAF development platform with strong industrial anchoring and commitments across the value chain. By securing key elements—land, CO₂ supply, power access, and stakeholder support early in the development cycle, the project enables superior bankability compared to competing initiatives, while at the same time ensuring the lowest production costs. This positions VolagHy as an attractive opportunity for investors, industrial partners, and off-takers seeking scalable, competitive, and replicable eSAF production.

Customer references Available on request.

ENERGY GENERATION MARKET

OFFSHORE WIND

PRODUCT

X1 WIND

X1 Wind BOOTH #

A34 CLICK OR SCAN

Carrer de la Diputació 284, 08009 Barcelona, Europe

Spain

x1wind.com alex.raventos@x1wind.com

DEEP-WATER OFFSHORE WIND THAT IS BOTH SCALABLE AND COST-EFFECTIVE

Starting sales

The need

Offshore renewable energy is crucial in achieving climate neutrality by 2050 (European Commission). However, floating wind solutions in sites located in deep waters can pose a particular challenge. Current technology is too costly for utilities and power producers.

The solution

X1 Wind has developed an effective solution for the offshore wind market: an innovative floating wind platform that significantly reduces capital expenditures and levelised cost of energy (LCOE). With floating offshore wind now cost-effective, this taps into the phenomenal wind potential of deep-water locations. X1 Wind’s approach is based on a downwind-configured weathervane

platform that makes an efficient structural design possible with minimal environmental impact on the ocean.

Value proposition

• Lighter floater: reducing the weight of current substructure solutions. • Easier installation: with an innovative single point mooring (SPM) system; PivotBuoy®. • Reliable: uses passive orientation and removes unnecessary active systems (yaw, ballast). • Scalable: with the integration of larger downwind turbines and TLP moorings that scale better in deeper waters compared to catenaries. • Lower environmental impact: reducing environmental footprint through the TLP mooring system and use of local infrastructure.

Customer references

NextFloat Project (2022 - 2031) • Objective: Deploy a 8,5 MW (called X100) pre-commercial platform in the Mediterranean Sea, while advancing in parallel on the industrialization and scaling-up of the integrated solution up to 20MW+ scale. • Main Partners: Technip Energies, Naturgy PivotBuoy Project (2019 - 2023) • Objective: Demonstrate the innovative PivotBuoy® through the design, fabrication, and testing of the X30 part-scale floating wind platform. • Main Partners: EDP New

InnoEnergy | TBB 2026

GRID & INFRASTRUCTURE

Bamboo Energy..................................80 ENEIDA.IO.............................................81 Energiot ..............................................82 Enline.................................................... 83 Hepta Insights....................................84 Mpower Ventures AG........................ 85 TokWise................................................86

InnoEnergy | TBB 2026 MARKET

POWER TSO

SUB MARKET

POWER DSO

PRODUCT

BAMBOO ENERGY

Bamboo Energy BOOTH #

CLICK OR SCAN

Llacuna 162, 08018 Barcelona, Barcelona

Spain

bambooenergy.tech msanmarti@bambooenergy.tech

EMPOWERING YOUR FLEXIBILITY Consolidated sales

The need

While energy markets are being opened up to demand, energy consumers are notable to profit from this. Access to cleaner and cheaper energy should be democratised by providing ways to monetise the flexibility of energy assets and integrate renewable energy sources.

The solution

and demand side. The software platform of choice for demand aggregation, it offers both modular architecture and a versatile platform and is able to adapt to customer requirements and regulations. The technology has an artificial intelligence core that enables tailored solutions while reducing operating costs.

Value proposition

• Modular architecture. • Versatile platform.

A platform for retailers that manages the flexible energy markets on both the supply

• AI core allows for tailored solutions and reduced operating costs. • Can manage all types of demand flexibility.

Customer references

TotalEnergies, Engie, Acciona, Endesa, EDP, Naturgy, Nexus Energia, ElectraCeldense, Atlas Energia, Agrienergia, Peusa, Trebol Energia, Grupo Enhol, Grupo Cuerva, Schneider Electric.

Grid & infrastructure MARKET

POWER DSO

PRODUCT

ENEIDA DEEPGRID®

ENEIDA.IO BOOTH #

CLICK OR SCAN

R. Alexandre Herculano 21B, 3000-019 Coimbra

Portugal eneida.io

ENEIDA DEEPGRID® – OPERATIONAL ANALYTICS PLATFORM FOR THE VISIBILITY, OPTIMISATION & CONTROL OF THE LV NETWORK

marketing@eneida.io

Consolidated sales

The need

Distribution System Operators, new energy players, and large enterprises are facing increasing complexity in managing Low Voltage grids, driven by the rapid growth of clean technologies and the demand for reliable, affordable, and sustainable energy. Operational teams need real-time insights and control to ensure grid stability, efficiency, and resilience, especially in the face of extreme weather events and the transition to zero-emission neighbourhoods.

The solution

ENEIDA.IO provides the eneida DeepGrid® platform, a proven operational intelligence solution

that delivers real-time visibility, network optimisation, and full operational control of the Low Voltage network. Deployed across Europe, Australia, and New Zealand, the platform enables operational teams to monitor, manage, and optimise grid performance efficiently while supporting the adoption of clean energy technologies.

By enabling smarter, more sustainable grid management, the platform accelerates the journey toward zero-emission, future-ready neighbourhoods, and keeps the network securely operated, while helping utilities and energy operators achieve a more affordable, reliable, and sustainable energy future.

Value proposition

• E-Redes • Scottish and Southern Electricity Networks (SSEN), Scotland • ScottishPower Energy Networks (SPEN), Scotland • PowerCo, New Zealand • Unison, New Zealand

With unmatched reliability, scalability, and the lowest total cost of ownership in the market, ENEIDA.IO empowers teams to increase operational efficiency, adapt to rapid changes in energy demand, and strengthen resilience against disruptions.

Customer references

InnoEnergy | TBB 2026 MARKET

POWER DSO

PRODUCT

GLOBAL SELF-POWERED IOT NETWORK FOR A SMARTER GRID

Energiot BOOTH #

CLICK OR SCAN

Avenida de Can Domènech (Campus de la UAB) Edificio Eureka , 08193 Cerdanyola del Vallès, Barcelona

Spain

DYNAMIC LINE RATING, PREDICTIVE MAINTENANCE AND BIRD PROTECTION TO BOOST RENEWABLES AND REDUCE COSTS

energiot.com pablo.ribeiro@energiot.com

Starting sales

The need

Grid operators face rising congestion, ageing infrastructure and pressure to integrate more renewables while keeping networks safe, reliable and cost-efficient. Limited field data makes it harder to optimize capacity, reduce maintenance costs and prevent failures.

The solution

Energiot provides 24/7 self-powered IoT monitoring for power grids. Its devices collect realtime field data from overhead lines, underground cables and critical assets, enabling Dynamic Line Rating to optimize capacity, smart monitoring for asset visibility, predictive maintenance to prevent failures, Dynamic Cable

Rating for underground cables, and bird protection to reduce electrocution and collision risks.

Value proposition

Customers gain more capacity, safer operation and lower inspection and maintenance costs with full grid visibility from existing infrastructure. Energiot’s patented self-powered sensors use piezoelectric energy harvesting, avoiding bulky current-transformer-based devices and enabling accurate, affordable deployment across overhead lines, underground cables and critical assets. The solution adapts to different communication protocols and integrates data into SCADA or other IoT systems.

Customer references

• Alliander | 2024 | Netherlands: Smart monitoring and predictive maintenance for substation transformers and underground power lines. • EDP | 2023-2025 | Spain: Smart monitoring and bird protection reduce bird incidents. • Enel | 2025: Bird protection to reduce electrocution risks on towers and substations. • Elia and Herogrid EU project | 2025 | Belgium: DLR for HTLS power lines to increase capacity and renewable integration. • Iberdrola | 2026 | Spain: DLR to increase line capacity. • Litgrid | 2026-2027 | Lithuania: DLR for the national transmission grid to reduce congestion and support renewables.

Grid & infrastructure MARKET

POWER TSO

PRODUCT

AI & DIGITAL TWINS FOR ENERGY ASSET MANAGEMENT

Enline BOOTH #

CLICK OR SCAN

Rua dos Combatentes da Grande Guerra 14, 5370-468 Mirandela, Trás-os-Montes

Portugal

enline.energy

AI-POWERED DIGITAL TWINS FOR SMARTER, MORE EFFICIENT ENERGY INFRASTRUCTURE MANAGEMENT

info@enline.energy

Consolidated sales

The need

Energy producers and grid operators face challenges in integrating new technologies and in meeting soaring demand. The sector needs smarter energy management, more secure connections and higher transmission capacity to accelerate the transition towards a sustainable, resilient power system.

The solution

Enline’s cloud-based system creates digital twins of energy assets (infrastructure and resources) that accurately simulate real-world behaviour. This enables real-time analysis, predictive monitoring and precise optimisation with total visibility.

Digital models use real-world data without the need for additional hardware or conducting any fieldwork.

Value proposition

• Enhanced grid reliability and renewable integration, supported by continuous monitoring and data-driven optimisation. • Reduced operational and energy costs through improved asset utilisation and smarter planning for new projects. • Deployment that requires no hardware additions, system interruptions or fieldwork. • Secure, flexible and scalable platform, easily adaptable to any grid environment or operational context.

Customer references

ABB, Fenix Energia Suministradora, Coes, Intertechne, Hydroplus Global, Austrian Power Grid, Geometric Talks Consulting, Hydro One, 50 Hertz Transmission GmbH, Finerge, Las Bambas, Secil, UTE, CJR Renewables, ISA Intercolombia, Transelec, Atlantica, State Grid Brazil Holding S.A., Red Eletrica Espana, Unacem, Electrodunas, Electricidade de Moçambique, Celepsa, Electronet, ISA Cteep, Grupo Energia Bogotá, Neoenergia, ISA Rep, Copel, Ren, Cemig, Energisa, Renault, Renew Power.

InnoEnergy | TBB 2026 MARKET

POWER DSO

PRODUCT

HEPTA INSIGHTS

Hepta Insights BOOTH #

CLICK OR SCAN

Paju 2, 50603 Tartu, Tartumaa

Estonia

heptainsights.com bd@heptainsights.com

AI-ENHANCED SOFTWARE FOR THE SWIFT INSPECTION AND REPAIR OF ANOMALIES IN THE GRID

Consolidated sales

The need

Transmission system operators (TSO) and distribution system operators (DSO) still rely on slow, labour-intensive foot patrols and helicopter fly-overs that can miss critical defects. This leads to costly unplanned outages, wildfire liability, regulatory penalties and soaring O&M budgets.

The solution

An end-to-end grid analysis analytics platform that can use multiple data inputs (RGB + thermal + LiDAR data + satellite) with an AI-enhanced approach that swiftly flags every mechanical, thermal and vegetation

anomaly and prioritises work orders straight into the utility’s existing maintenance software.

Value proposition

• Utilities detect 5-10 × more grid anomalies. • Fewer outages, lower wildfire and vegetation risks. • Improvement in resilience of grid and SAIDI/SAIFI. • Reduced cost in total grid maintenance.

Customer references

• EDP Labelec (EDP Group, Portuguese DSO) • Engie Chile and Brazil (Engie Group)

• Saesa DSO and TSO (Chilean Group) • Vattenfall (Swedish DSO) • Celsia (Colombian DSO) • Transener (Argentinian TSO) • Transelec (Chilean TSO) KEDS (Kosovan DSO) • Electricidade de Madeira (Portuguese DSO) • Enefit Connect (Estonian DSO) • Elering (Estonian TSO) • Sadales tīkls (Latvian DSO) • Kungalv Energi (Swedish DSO) • Lerum Energi (Swedish DSO) • Imatra Elekter (Estonian DSO) • Kymenlaakson Sahko (Finnish DSO) • Fingrid (Finnish TSO) • DTEK (Ukrainian DSO) • and others.

Grid & infrastructure MARKET

OFF GRID

PRODUCT

MPOWERING THE FUTURE

Mpower Ventures AG BOOTH #

CLICK OR SCAN

Josefstrasse 214a, 8005 Zurich

Switzerland

mpower.africa info@mpower.africa

A B2B2C PLATFORM SUPPLYING AND FINANCING SMALL-SCALE SOLAR INFRASTRUCTURE IN EMERGING MARKETS

Consolidated sales

The need

In Sub-Saharan Africa 500+ million people live without access to electricity and millions suffer from unreliable grid connections. Many rely on costly, polluting diesel generators, but limited access to financing prevents businesses and households from adopting sustainable alternatives.

The solution

MPower is building the leading clean energy platform for Africa, combining high-quality solar hardware, inclusive financing solutions, and proprietary software. Through a scalable B2B2C

partnership model, we work with local distributors, solar installers, and financial institutions to deliver affordable solar systems, e-mobility, and energy-efficient appliances. Our software digitizes operations, enables remote monitoring, driving both financial inclusion and energy access.

Value proposition

• Clean Energy: Reliable, efficient solar systems and appliances tailored for Commercial & Industrial (C&I) clients, SMEs, and households. • Access to Financing: Flexible financing for distributors and end-users, reducing working capital needs and making clean energy affordable.

• Software & Data: An in-house developed, fully digital platform that tracks and digitises all operations and leverages data to improve financial inclusion of our end-users.

Customer references

MPower approaches 3 different type of customers: • Small C&I clients • SMEs • On-grid as well as off-grid households.

InnoEnergy | TBB 2026 MARKET

POWER DSO

PRODUCT

TOKWISE

TokWise BOOTH #

CLICK OR SCAN

Prof. Haralambi Tachev 18, 1164 Sofia

Bulgaria

tokwise.com office@tokwise.com

THE OPERATING PLATFORM FOR RES AND BESS OPTIMIZATION

Consolidated sales

The need

By 2030, Europe adds 670+ GW of RES and BESS—all exposed to merchant volatility. Solar and wind earn only when markets reward them; batteries only when dispatched with precision. Without the right tools, owners lose this flexibility value to volatility or hand it to third-party aggregators.

The solution

TokWise is the AI platform that activates RES and BESS portfolios as tradable flexibility assets. GuardianTrade, our decision engine, ingests live market, asset, and weather data to forecast

prices, optimise dispatch, and execute on day-ahead, intraday, and balancing markets—24/7, autonomously. For batteries, it runs strategies across arbitrage, ancillary services, and spot. For RES, it converts production volatility into capture-price uplift. One platform, one contract, every asset class.

Value proposition

Unlocks the full revenue potential of RES and BESS portfolios: +€4.20 per MWh in measurable uplift, or €6.6 million per year for a 1 GW portfolio. Replaces fragmented tools, manual processes, and outsourced aggregators

with owner-controlled execution intelligence—full transparency, full upside. Scales with the portfolio: hybrid assets, multicountry operations, and new MWs added under existing agreements without renegotiation or extra overhead.

Customer references

Utilities BayWa r.e. / Germany Sunnic Lighthouse GmbH / Germany; Austria Hafslund / Nordics oekostrom / Austria IPPsEncavis GmbH / Germany Prokon / Germany Enery GmbH / Austria, Romania / Bulgaria Arkolia Energies / France / Prosumers.

C ENERGY STORAGE

Altris.....................................................88 AQUABATTERY....................................89 Basquevolt..........................................90 BeePlanet Factory..............................91 BM2Solar Energy...............................92 Charge2Change.................................. 93 Elestor..................................................94 ElevenEs..............................................95 GDI.........................................................96 Graphmatech..................................... 97 Heat Ventors.......................................98 Mecaware............................................99

Mine Storage.................................... 100 Prime Battery Technologies........... 101 Pure Battery Technologies.............102 Qkera...................................................103 Rivus Batteries................................. 104 Silbat....................................................105 Skeleton............................................. 106 Suena...................................................107 TaiSan................................................. 108 the Batteries..................................... 109 Verkor.................................................. 110 volytica diagnostics.......................... 111

InnoEnergy | TBB 2026 MARKET

ENERGY STORAGE SOLUTIONS

SUB MARKET

BATTERY INDUSTRY

PRODUCT

FENNAC® - PRUSSIAN WHITE CATHODE ACTIVE MATERIAL

Altris BOOTH #

CLICK OR SCAN

Norra Depågatan 2, 754 54 Uppsala

Sweden altris.se

sales@altris.se

EUROPEAN SODIUM-ION CATHODE MATERIAL – VALIDATED IN AUTOMOTIVE, READY TO SCALE

Starting sales

The need

Europe needs batteries it can make and source itself. Lithium-ion relies on critical raw materials and supply chains concentrated outside Europe, and loses performance in the cold. Automotive, grid, data-centre and defence customers want a safe, affordable chemistry that performs across temperatures and can be produced locally.

The solution

Fennac® is Altris’ proprietary Prussian White cathode for sodium-ion batteries, made from abundant iron and sodium

– no lithium, nickel or cobalt. Its synthesis avoids the energy-intensive calcination step used for lithium-ion cathodes. Fennac is produced at industrial scale in Kolín, Czechia, and Altris’ Uppsala battery cell pilot line builds reference cells – high-rate P-Series and long-life E-Series – to the specification partners run in volume.

Value proposition

• Validated in automotive: cold-cranking proven down to -40°C with Clarios and InoBat, now moving to pilot-scale and small-series production.

• Energy density approaching LFP: 160 mAh/g at cathode level and above 160 Wh/kg at cell level, with strong high-rate power. • Secure European supply: abundant raw materials, no critical minerals. • Safe to handle: cells can be stored and shipped at 0 V. • Flexible routes to scale: material supply, technology licensing or co-development with cell makers.

Customer references

Clarios and InoBat (joint automotive validation programme). Further references available on request.

Energy storage MARKET

ENERGY STORAGE SOLUTIONS

SUB MARKET

BATTERY INDUSTRY

PRODUCT

AQUBATTERY

AQUABATTERY BOOTH #

CLICK OR SCAN

Eikenlaan 255C, 2404 BP Alphen aan den Rijn

The Netherlands aquabattery.com

janneke.tjonpiangi@aquabattery. com

Pilot

The need

Europe’s energy transition faces hurdles in the intermittence of renewables, grid congestion, curtailment and high power prices. These place strains on energy security and competitiveness. To meet 2030 goals, 65 GW of long-duration storage is needed—but deployment lags far behind.

The solution

AQUABATTERY is a safe, sustainable and affordable long-duration energy storage system using saltwater. It offers flexibility

SALTWATER-BASED, LONGDURATION STORAGE ENABLING DECARBONISATION OF INDUSTRIES, BUILDINGS AND GRID beyond 8 hours, enabling reliable integration of intermittent solar and wind by balancing supply and demand. Using abundant and non-toxic materials, it ensures safety, scalability, reduces fossil fuel reliance and supports grid stability. This makes it ideal for decarbonising industries and power systems.

Value proposition

• Employs safe and scalable saltwater-based technology for flexible, long-duration energy storage, tailored to meet industrial energy needs sustainably.

• Targets behind-the-meter commercial and industrial customers facing high energy bills and decarbonisation goals. • Optimises value from decentralised renewables by reducing energy costs, grid fees, and CO₂ emissions. • The system helps manage grid congestion and ensures 24/7 access to clean, reliable renewable power.

Customer references Statkraft, Verbund.

InnoEnergy | TBB 2026 MARKET

ENERGY STORAGE SOLUTIONS

SUB MARKET

BATTERY INDUSTRY

PRODUCT

BASQUEVOLT SA

Basquevolt BOOTH #

CLICK OR SCAN

Parque Tecnológico ı C/ Albert Einstein° 35, 01510 Vitoria-Gasteiz, Álava

Spain

basquevolt.com/en

THE SAFEST AND MOST COMPETITIVE SOLID-STATE BATTERY

pfernandez@basquevolt.com

Pilot

The need

A major roadblock in the race to phase out fossil fuels is that lithium batteries currently do not meet customers’ requirements in ensuring a complete transition in mobility and energy applications.

The solution

A new generation of solid polymer composite and semisolid electrolytes has resulted from a decade of research by Prof. Michel Armand, one of the fathers of modern lithium battery

development. The research team led by Professor Armand has been able to improve the composite polymer electrolytes (technology he discovered in 1978) and solve the main solidstate battery challenges. This unique technology brings lithium batteries beyond the state of the art in cost, safety and energy density.

• Commitment to develop the highest quality battery materials and cells. • Set to make possible the mass deployment of electric transportation, stationary energy storage and advanced portable devices. • State of the art in terms of cost, safety and energy density.

Customer references Available on request.

Value proposition

Energy storage MARKET

ENERGY STORAGE SOLUTIONS

SUB MARKET

SOLAR PV

PRODUCT

BCUBE®, BCUBE® COMPACT & BHIVE

BeePlanet Factory BOOTH #

CLICK OR SCAN

Polígono Ipertegui II, 12, 31160 Orkoien, Navarra

Spain

beeplanetfactory.com carlos.pueyo@beeplanetfactory. com

Consolidated sales

The need

Energy costs are rising, grids are unstable and renewables aren’t always available when needed. Companies need a way to store energy as a means to cut costs, ensure power availability and use solar efficiently. This, without major grid upgrades or high emissions.

The solution

Energy storage solutions that enable companies to save on energy costs, maintain a stable power supply and maximise on solar energy use. By storing electricity when it’s abundant or inexpensive and releasing it during periods of high demand, reliance on the grid is reduced

SUSTAINABLE ENERGY STORAGE SOLUTIONS and peak fees avoided. Designed for easy installation and expansion, these systems improve efficiency and resilience without costly infrastructure changes.

Value proposition

• High-performance batteries: high quality and safety standards. • Modularity: capacity expandable from 214kWh up to 5MWh. • Expert support and service: committed engineering team. • Own technology: BMS and EMS. • Interoperability: facilitates the optimisation of various technologies. • Service: interaction with the client at every stage of the project.

• Complete solution: from hardware to software. • Sustainability.

Customer references

• Intermeat: 1867kWh / 368 kW to support a food product factory • Ansasol: 1200kWh / 500 kW to maximize solar energy at their photovoltaic plant • Mercedes-Benz Vitoria factory: 42kWh + PV installation for support to charging infraestructure and self-consumption. • Galp: 368kWh connected to 2 chargers of 180 kW More available on request.

InnoEnergy | TBB 2026 MARKET

ENERGY STORAGE SOLUTIONS

SUB MARKET

SOLAR PV

PRODUCT

BM2SOLAR PLATFORM

BM2Solar Energy BOOTH #

CLICK OR SCAN

Rua Luis de Camoes 102 10B-4, Lisbon 1300-360

Portugal

BM2Solar.com susanaqp@BM2Solar.com

UNLOCK NEW REVENUES FOR YOUR BESS AND SOLAR ASSETS

Pilot

The need

Many operational or RTB solar PV projects fail to achieve their target IRR because of low electricity prices during solar production hours, which in many cases fall to zero or even negative values. Forward projections point to a further deterioration of solar capture prices. Battery storage offers a way out of the low solar price trap. However, its classical use, simply shifting grid injection to other hours, captures only a fraction of its potential value.

The solution

The BM2Solar solution for hybridized (PV+BESS) plants goes beyond classical energy shifting. It boosts revenues by operating the battery dynamically across all available electricity markets (day-ahead, intraday auctions

and continuous, balancing services such as aFRR and mFRR, redispatching and imbalances). This contrasts with the old model of following a static, pre-determined revenue-stacking model. By forecasting prices and market opportunities in real time, BM2S automatically reallocates battery capacity to whichever market is most profitable at any given moment, capturing significantly more value than fixed, spreadsheet-based revenue-stacking approaches. BM2Solar’s AI-based trading engine built on machinelearning algorithms, combining gradient boosting (LightGBM/ XGBoost), deep learning (neural networks and RNNs) and large language models that continuously ingest historical, meteorological, and real-time market data to forecast prices and market opportunities and to optimise

revenues. It decides automatically when to charge, buy and sell, in which markets, and how to capitalise on price differences between them, continuously re-optimising capacity allocation across markets in real time.

Value proposition

BM2Solar AI-based trading engine manages and controls the market operation of the hybridised plant (PV + BESS) or the stand-alone BESS, deciding continuously, at every moment, what to do to maximize revenues. BM2Solar also provides comprehensive, end-to-end storage deployment—encompassing financing, engineering, construction, and maintenance—all at zero cost, risk, or hassle for the solar SPV.

Customer references Available upon request 09

Energy storage MARKET

ENERGY STORAGE SOLUTIONS

PRODUCT

C2C GO-START

Charge2Change BOOTH #

CLICK OR SCAN

Avenida José Francisco Guerreiro, nº28, Paiã Park, Armazém A2.12, 1675-078 Odivelas

Portugal

c2cnewcap.com andre.maodeferro@c2cnewcap. com Starting sales

The need

Trucks are responsible for moving at least 70% of goods in Europe. Although the battery has advanced in other applications, heavy vehicles still use the same lead-acid battery technology that causes dead-starts and excessive idling while the vehicle is stationary.

SUPERCAPACITOR SOLUTION FOR SUSTAINABLE MOBILITY The solution

GO-START is a supercapacitor module especially made for EU trucks. Easy to install, it is provided along with a deepcycle battery, both of which are installed in the battery compartment as a plug and play solution. C2C is the first company to directly replace the original lead-acid batteries with a supercapacitor-based solution that does not require modifications to the vehicle.

Value proposition

• €1500 fuel savings per year. • Drastic reduction of lead - a highly toxic metal. • Reduction of need to replace battery. • Reduction of costly road problems related to batteries.

Customer references Galp.

InnoEnergy | TBB 2026 MARKET

ENERGY STORAGE SOLUTIONS

PRODUCT

ELESTOR - ELECTRICITY STORAGE (LDES)

Elestor BOOTH #

CLICK OR SCAN

Westervoortsedijk (Building BF) 73, 6827 AV Arnhem

The Netherlands elestor.com

info@elestor.com

REVOLUTIONARY LOW-COST ELECTRICITY STORAGE IN A HYDROGEN-X FLOW BATTERY

Starting sales

The need

Given the unpredictability of renewable energy producers, such as sun and wind, grid owners are looking for cost-effective means of storing electricity. This is essential to solve issues such as instability and potential overload of the electricity grid.

The solution

Elestor electricity storage systems are based on hydrogen-X flow battery technology. Originally developed by NASA, Elestor has further engineered the concept to enable its use in a wide variety of grid and

industrial applications. The active materials are low-priced as they are abundantly available on a global scale. The technology enables a high power density and high energy density, contributing to the reduction of storage costs.

Value proposition

• Fast reaction kinetics, resulting in very short response times. • High accessibility, enabling easy maintenance and updates. • Independent configuration of storage power (MW) and capacity (mWh). • Modulary scalable, up to 10s of MW and 100s of MWh.

• No self-discharge when system is idle. • Storage costs per MWh 5-10 times lower than incumbent systems.

Customer references

Several systems have been built in cooperation with customers and subsidies. Elestor has hands-on experience with permitting for Flow batteries based on the Hydrogen-X technology. Currently a shared pilot facility is being built and commissioned to be running as a standalone pilot.

Energy storage MARKET

ENERGY STORAGE SOLUTIONS

SUB MARKET

BATTERY INDUSTRY

PRODUCT

ELEVENES

ElevenEs BOOTH #

CLICK OR SCAN

Tolminska 35, 24000 Subotica, Vojvodina

Serbia

elevenes.com marton.pap@elevenes.com

EMPOWER EVERYTHING Starting sales

The need

While global demand for battery cells is surging a key challenge remains: how to successfully scale in the new battery cell manufacturing era.

three times less heat in thermal runaway), and have a lifespan of up to three times longer. ElevenEs is making clean energy more accessible, advancing the benefits of electrification for a broader consumer base.

The solution

Value proposition

ElevenEs leads Europe’s electrification with prismatic LFP cells and an innovative cell-topack (CTP) solution, developed at a cutting-edge pilot plant. Cells are cost-effective, nickel and cobalt-free, safer (releasing

• A unique value proposition, leveraging the extensive battery industry expertise of our founding shareholder, who has overseen 4GWh of electrode manufacturing for over 30 years.

• Proficiency in high-precision aluminium processing – coating, slitting, cutting, and deep-drawing – optimises manufacturing for affordable cells at scale. • A blend of experience and capabilities distinguishes ElevenEs in Europe’s battery industry.

Customer references Available on request.

InnoEnergy | TBB 2026 MARKET

ENERGY STORAGE SOLUTIONS

SUB MARKET

BATTERY INDUSTRY

PRODUCT

100% SILICON ANODES FOR LI-ION BATTERIES

GDI BOOTH #

CLICK OR SCAN

Luchthavenweg 10, 5657 EB Eindhoven, Noord-Brabant

The Netherlands gdinrg.com

100% SILICON ANODES THAT ENABLE LONGER-LASTING, FASTER-CHARGING BATTERIES WITH A SECURE SUPPLY CHAIN

rob.anstey@graphnx.com

Pilot

The need

Electrification is creating a growing demand for batteries. However, they must not only offer higher energy density, faster charging and an excellent safety profile, but have a secure supply chain and be manufactured with a low-carbon footprint.

supply chain of copper foil and silane gas precursor is entirely EU/US-based, with manufacturing taking place in the Netherlands and Germany. Automated roll-to-roll production is highly efficient, leveraging industrial equipment and facilities that already operate at scale.

The solution

Value proposition

GDI’s 100% silicon anodes replace traditional graphite anodes in lithium-ion batteries, affording 30% higher energy density and 3x faster charging without sacrificing safety. The

• GDI supplies customers with rolls of finished anode and works with them to optimise battery cell architectures to meet differing needs.

• Higher-performing batteries for use across many industries. • A fully EU/US supply chain and manufacturing operation mitigates global geopolitical and supply chain risk. • Designed for safety, batteries with GDI anodes have passed extensive nail penetration safety testing. • Unlike traditional graphite anodes, the production of GDI anodes is entirely carbon free.

Customer references Available on request.

Energy storage MARKET

ENERGY STORAGE SOLUTIONS

SUB MARKET

INDUSTRY

PRODUCT

AROS GRAPHENE®

Graphmatech BOOTH #

C10

CLICK OR SCAN

Mältargatan 17, 753 18 Uppsala

Sweden

graphmatech.com ted.karlsson@graphmatech.com

Consolidated sales

The need

The industrial potential of graphene has been limited by technical and commercial challenges. One particular problem is that during upscaling, graphene clumps together – a process called agglomeration – weakening its properties and reducing its commercial viability.

The solution

Graphmatech has cracked the code to scaling grapheneenhanced materials for cost-efficient industrial use, boosting performance, resource efficiency and sustainability.

UNLOCKING THE INDUSTRIAL POTENTIAL OF GRAPHENE FOR ENHANCED PERFORMANCE, RESOURCE EFFICIENCY AND SUSTAINABILITY Breakthrough graphene and patented technologies help prevent agglomeration, ensuring dispersion and integration into plastics and metals. This opens doors to large-scale applications in industries, from 3D printing, conductive polymers, and industrial packaging to hydrogen storage and transportation.

Value proposition

• Advanced materials development at unmatched speed through machine learning integration. • Flexibility to work with different graphene types and materials.

• Materials adopt graphene attributes, such as conductivity, strength, self-lubrication, and barrier properties. • Modular manufacturing for rapid and cost-effective scale up, with possibility to establish 100-tonne production sites globally within months. • Graphene is made commercially viable.

Customer references

ABB; MTC; Ericsson; Sandvik; Konsberg Automotive; National; Gränges; Huber+Suner; Filalab; Polytubes; Alfapac; MTC; Alstom

InnoEnergy | TBB 2026 MARKET

ENERGY STORAGE SOLUTIONS

PRODUCT

HEATTANK

Heat Ventors BOOTH #

C11

CLICK OR SCAN

Tancsics M. u. 15., 5400 Mezotur

Hungary

heatventors.com hello@heatventors.com

AN INTELLIGENT THERMAL BATTERY

Consolidated sales

The need

Energy is wasted in nearly every thermal energy system worldwide. €20 billion or 250 million metric tonnes of CO2 equivalent of greenhouse gases could be saved in Europe alone through optimal thermal energy storage.

The solution

Traditionally, heat is stored by changing the temperature of the water. Instead of water, HeatTank incorporates special biomaterials, called phase change materials (PCM). By melting and solidification it is possible to reduce storage size by almost 90 percent, saving at least 20-50 percent energy, with a total return on investment of between 3-5 years. Energy systems become more efficient and operational costs are reduced.

Value proposition

Efficient cooling solution for an existing system, with: • Energy-saving of 20-50 percent. • Cost reduction: 3-5 years of ROI. • Operation security. • 100 percent SLA. • Easy integration. Additional benefits in case of a new system, include: • Peak performance management -> acquisition cost reduction. • Smaller cooling system, pipes and fittings. • Easier electricity system. • Retail in higher price. • Innovation means better certification.

Customer references

• Italy: District heating, 50 kW,1 pcs HT 50-1.

• France: District heating,250 kW, 1 pcs HT 50-1. • Hungary: Manufacturing hall heating + cooling, 163 kW, 2 pcs HT 50-1. • Hungary: Office building cooling, 450 kW, 2 pcs HT 50-1. • Portugal: Shopping center cooling, 2,300 kW, 3 pcs HT 50-1. • Hungary: Technology cooling, 1280 kW, 4 pcs HT 50-1. • Portugal: Hotel cooling, 270 kW, 2 pcs HT 50-1. • Hungary: Hotel cooling, 367 kW, 3 pcs HT 50-1. • Spain: Data center cooling, 20 kW, 1 pcs HT 25-1. • France: District heating, 250 kW, 1 pcs HT 50-1. • Oman: Hotel cooling, 2,400 kW, 4 pcs HT 50-1.

Energy storage MARKET

ENERGY STORAGE SOLUTIONS

PRODUCT

MECAWARE

Mecaware BOOTH #

C12

CLICK OR SCAN

41, boulevard Marcel Sembat, 69200 Venissieux

France

mecaware.com benoit.samanos@mecaware.com

STRATEGIC METAL PRODUCER FOR A SUSTAINABLE TOMORROW

Pilot

The need

The European battery manufacturing industry faces major challenges in securing a stable raw material supply and in recycling production scraps, the process of which consumes more of these same raw materials.

The solution

Mecaware produces recycled strategic metals from battery waste. Our innovative sulfatefree, zero-effluent process was developed to keep the environmental impacts of recycling low. We locate our plants as close to waste sources as possible. Battery waste is a local

resource capable of supporting a sovereign domestic European strategic metals supply. Recycled materials are a pillar of a lowercarbon, more sustainable and responsible battery industry.

Value proposition

• Secures 70-80 per cent volume and price of total EV battery production costs. • Reduces 30-50 per cent of EV battery recycling costs vs conventional hydrometallurgy recycling processes. • Delivers sustainable and recycled metals in accordance with current and future EU regulation (Critical Raw Materials Act).

• Works towards the development of a local industrial circular economy and a secure supply chain of critical and strategic metals.

Customer references

VERKOR (EV battery manufacturer) 2023. Project of pilot line in Dunkirk, France. • Budget: 15M€ • Secure strategic and sustainable metals by recycling batteries • Sales figures: subsidies.

InnoEnergy | TBB 2026 MARKET

ENERGY STORAGE SOLUTIONS

PRODUCT

MINE STORAGE

Mine Storage BOOTH #

C13

CLICK OR SCAN

Torsgatan 11, 8tr, 111 23 Stockholm

Sweden

minestorage.com fredrik@minestorage.com

ENABLING THE SUSTAINABLE ENERGY TRANSITION

Early stage

The need

The requirement to tackle the climate crisis and the volatile energy market has become urgent. In the move towards weather-dependent renewable production, there is increasingly dependency on energy storage to secure and balance the electricity supply.

The solution

Mine storage technology is a proven, scalable way to safely store and distribute energy and help balance transmission grids. Mine Storage develops grid-scale energy storage in underground

mines using closed-loop pumped storage hydropower. By leveraging the height differences in mines, large quantities of energy are stored using water and gravity. The operational model for each mine storage facility is developed to optimise revenue streams from local markets.

Value proposition

• Grid-scale energy storage that can be scaled globally. • Proven technology applied in an innovative setting. • Clean solution using water and gravity that does not rely on rare-earth minerals.

100

• High round-trip efficiency of 70-85 percent. • Long lifecycle resulting in a low levelized cost of storage. • Leveraging existing infrastructure by making closed mines a circular energy asset. • Potential to scale globally as there are more than 1 million closed mines.

Customer references

Strategic partnerships with: • Dairyland Power Cooperative (US market) • Mälarenergi (Swedish market)

Energy storage MARKET

ENERGY STORAGE SOLUTIONS

SUB MARKET

BATTERY INDUSTRY

PRODUCT

PRIME

Prime Battery Technologies BOOTH #

C14 CLICK OR SCAN

Strada Oxigenului , 077035 București

Romania

primebatteries.com vicentiu.ciobanu@primebatteries. com

Consolidated sales

The need

The integration of renewable energy sources (RES), peak load control, the necessity for grid resilience and the increasing number of electric cars are all driving the need for energy storage systems (EES). As RES become more common, the demand for efficient ESS increases.

The solution

PRIME is a leading European ESS manufacturer that delivers solutions both behind and after the meter. ESS play a crucial role in enabling the transition from

EUROPEAN ENERGY STORAGE SYSTEMS MANUFACTURER DELIVERS SOLUTIONS BOTH BEHIND AND AFTER THE METER fossil fuels to renewable energies by solving issues of intermittency and grid balancing, improving the flexibility, reliability and sustainability of the energy system. Storage reduces greenhouse gas emissions by allowing more RES to be integrated into the grid to replace fossil fuels during peak demand periods.

Value proposition

• Vertical integration ensures high quality at every stage of production, allowing for valueadded, customisable energy storage solutions that stay ahead of the competition.

• Batteries have a capacity from several kWh that can be used by households, to 3.5MWh container solutions that can be merged and used on a utility-scale. • 80% of value-added product is generated in-house.

Customer references

The company is a fully operational ESS factory with a 200MWh production and 21mEURO revenues for 2023 and ~+70mEUR forecast for 2024. Some of the clients are CEZ, Ingeteam, Monsson, Terberg.

101

InnoEnergy | TBB 2026 MARKET

ENERGY STORAGE SOLUTIONS

SUB MARKET

BATTERY INDUSTRY

PRODUCT

PURE BATTERY TECHNOLOGIES

Pure Battery Technologies BOOTH #

C15

CLICK OR SCAN

EAGLE STREET 10 ,LEVEL 32, QLD 4000 BRISBANE AUSTRALIA

Australia

purebatterytech.com info@purebatterytech.com

PRODUCERS OF SUPERIOR PCAM PRODUCTS FOR EV BATTERIES

Consolidated sales

The need

Common processes to produce battery materials are inefficient and result in excessive CO2 emissions. For battery and car manufacturers to meet their environmental obligations in line with legislation, an increased focus on ways to reduce emissions created through the battery supply chain is needed.

and black mass into precursor cathode-active material (pCAM) for EV batteries. This is done in a way which is more affordable and with superior environmental care. PBT’s technology refines both raw material (intermediates such as MHP) as well as black mass, thereby closing the recycling loop and making the end products truly environmentally friendly.

Value proposition

The solution

Pure Battery Technologies solves this problem through smarter and simpler technology, which refines intermediate products

• To respond to the global demand for EVs, Pure Battery Technologies (PBT) has developed a smarter, simpler and

102

greener technology to produce pCAM from either primary or recycled materials. • As a global provider, PBT enables battery cell makers to obtain flexible, clean and cost-effective battery materials while improving their environmental credentials. • Driven by excellence in technology and innovation, PBT continues to provide advanced solutions to the energy crisis.

Customer references Available on request.

Energy storage MARKET

ENERGY STORAGE SOLUTIONS

PRODUCT

QKERA

Qkera BOOTH #

C16

CLICK OR SCAN

Lichtenbergstr. 4, 85748 Garching

Germany

qkera.com weis@qkera.com

POWERING THE FUTURE - LAYER BY LAYER

Pilot

The need

Next-generation battery architectures promise safer, more powerful, and cost-effective Li-ion batteries. These require solid electrolytes, where the trade-off is between high-performing but expensive and brittle oxide ceramics or more reactive, softer and cheaper polymer and sulfide electrolytes.

The solution

Qkera has spent over six years solving oxide ceramic electrolyte production challenges. Using a breakthrough chemical synthesis approach, it produces thin, flexible sheets of a widely fieldtested oxide ceramic electrolyte as a drop-in product.

Value proposition

The material Qkera offers is considered the most promising candidate for next-generation batteries. The product provides

flexible, ionically conductive oxide ceramic layers deposited on polymer electrolytes and separators. This resolves interface issues toward the cathode, providing a strong barrier for high-energy anodes. The sheets are processed using standard roll-to-roll methods, as with other battery materials. This offers mechanical robustness, low resistance, scalability, and low cost.

Customer references Available on request.

103

InnoEnergy | TBB 2026 MARKET

ENERGY STORAGE SOLUTIONS

PRODUCT

RIVUS BATTERIES

Rivus Batteries BOOTH #

C17

CLICK OR SCAN

Medicinaregatan 8B, 413 90 Göteborg

Sweden

rivus-batteries.com

ORGANIC ELECTROLYTES FOR FLOW BATTERIES, ENABLING NONFLAMMABLE, LOW-COST EUROPEAN ENERGY STORAGE

andreas@rivus-batteries.com

Pilot

The need

Grid-scale energy storage must expand 300x by 2050 to meet energy targets, especially 6–24h long‑duration needs. Yet today’s options (li‑ion and vanadium flow) are constrained by critical-metal exposure, price volatility, and long, risk-prone supply chains that limit scalable, European deployment.

The solution

Rivus is commercialising a patented, water-based organic electrolyte made from widely available bulk chemicals and produced in standard European chemical plants. It is engineered

as a drop‑in replacement for vanadium electrolytes in commercially available flow‑battery hardware. Battery and stack testing along with system‑level modelling indicate 57-66% lower total system CapEx and up to 65-77% lower levelised cost of storage for 6–24h applications.

Value proposition

• Lower cost LDES: >57% lower CapEx vs vanadium flow batteries. • Inherently safe: waterbased, non-flammable and non-explosive. • EU-scalable supply chain: metal‑free formulation using organic feedstocks made in the EU.

104

• Low CapEx, de-risked deployment: scales via existing European chemical plants and is drop-in compatible with commercial flow battery hardware.

Customer references

Two customer pilots are secured and scheduled: Pilot 1 (indoor module) with HSB and Bengt Dahlgren AB and Pilot 2 (containerized module) in a real‑estate deployment. In addition, seven LOIs have been signed to date with leading chemical and technology companies and energy utilities.

Energy storage MARKET

ENERGY STORAGE SOLUTIONS

PRODUCT

SILBAT

Silbat BOOTH #

C18

CLICK OR SCAN

Avda. Doctor Federico Rubio y Galí 75, 28040 Madrid, Madrid

Spain

silbat.com iluque@silbat.com

LONG DURATION ELECTRICITY STORAGE IN MELTING SILICON

Early stage

The need

Cost-effective long duration stationary electricity storage is required to enable the predicted and necessary ramp-up of renewables to mitigate climate change. This currently relies on location constrained pumped hydro. Ultra-cheap, portable, fast to deploy technologies are urgently required.

is based on the latent heat of metal-grade silicon and its back-conversion to electricity using thermophotovoltaics. According to MIT research, cost-effectively turning renewables into dispatchable electricity sources requires long duration storage with capital expenses of less than $20/kWh. Silbat’s battery can do it for less than $10/kWh.

The solution

Value proposition

Silbat has developed a silicon battery that is set to transform the landscape of long duration stationary storage. The solution

• The potential to be extremely cheap <$10/kWh and enables a 100% RE supply paradigm.

• Highest energy density, only comparable to power-to-gas and superior to the best Li-ion batteries. • 30 yr lifetime with low O&M (vs Li-ion ~5yrs. lifetime). • Highly abundant, widely found raw materials – 1000X than Li-Co-Ni-Mn in Li-ion batteries or Pt-Pd in electrolyser stacks. • Silent operation and quick start – solid-state conversion, no moving parts.

Customer references Baker Hughes Co.

105

InnoEnergy | TBB 2026 MARKET

ENERGY STORAGE SOLUTIONS

PRODUCT

SKELETON SUPERCAPACITORS

Skeleton Technologies BOOTH #

C19

CLICK OR SCAN

Sepise 7, 11415 Tallinn

Estonia

skeletontech.com sales@skeletontech.com

NEXT-GENERATION SUPERCAPACITORS FOR ENERGY STORAGE

Consolidated sales

The need

Skeleton Technologies is a global leader in high-power, fast-charging energy storage for AI data centres, grid stability, mobility, and industry. Our mission is to help companies cut CO₂ emissions and save energy through our supercapacitor and SuperBattery solutions.

The solution

Skeleton’s high-power storage solutions offer ultra-fast charge/discharge, high-power density, and long cycle life. In data centres, we enable microsecond-level peak shaving

and GPU power smoothing. On the grid, we support frequency regulation, voltage stabilisation, and renewables integration, delivering unmatched reliability and responsiveness.

• Reduces TCO through durability and efficiency. • Supports FFR, voltage stabilisation, and renewables. • Safe in high-temperature, high-vibration environments.

Value proposition

Customer references

• Ultra-fast response (<1 ms) for AI surges, load spikes, and micro-outages. • High power density enables peak shaving and sub-second load balancing. • Over 1M cycles with no thermal runaway. • Modular design integrates at rack, row, or grid level.

106

Automotive: Honda Performance Development, BMW-Eberspächer, Transportation: Shell, Skoda Transportation, CAF Power & Automation; Grid: Hitachi Energy, Freqcon, GE Power Conversion; Industrial: GE Healthcare, Maja Stuwadoors

Energy storage MARKET

ENERGY STORAGE SOLUTIONS

PRODUCT

SUENA ENERGY

suena energy BOOTH #

C20 CLICK OR SCAN

Hoheluftchaussee 139, 20253 Hamburg, Hamburg

Germany

suena.energy lennard@suena.energy

ENERGY TRADING AUTOPILOT FOR LARGE-SCALE BATTERY STORAGE

Pilot

The need

Flexibility in the power grid is vital to achieving a smooth energy transition. Fluctuating supply, and volatile and highly-regulated markets all pose challenges. Efficiency and profitability are crucial factors in increasing adoption of energy storage to support the expansion of renewables.

The solution

suena energy is the first fully algorithmic and AI-based provider for the marketing of battery storage and renewable

energies. Its Energy Trading Autopilot uses state-of-the-art algorithms and precise forecasting to optimise trading decisions in real time. This market-leading technology from suena enables efficient trading across all balancing power and electricity markets.

Value proposition

• Customers gain higher revenues, extended storage lifetimes, and minimised risk. • suena energy offers optimised marketing for stand-alone storage systems, combinations of PV and wind with storage

systems, optimised direct marketing of renewable energies, portfolio optimisation and white label partner solutions. • The fully-automated Energy Trading Autopilot enables multi-market trading on a range of wholesale markets and covers various ancillary services.

Customer references

TagEnergy; Vattenfall; Orsted; AboWind; Encavis; FBS-Systems; MaxSolar.

107

InnoEnergy | TBB 2026 MARKET

BATTERY INDUSTRY

PRODUCT

TAISAN

TaiSan BOOTH #

C21

CLICK OR SCAN

City Road 128, EC1V 2NX London

United Kingdom taisan.co.uk

founder@taisan.co.uk

A NOVEL QUASI-SOLID-STATE SODIUM-ION BATTERY

Early stage

The need

Current sodium-ion batteries have too low an energy density to meet the needs of EVs. Solid-state cells are an option, but need high temperatures to operate, high stacking pressure, complex equipment to scale, and metal anodes have dendrites growth that limits cycle life.

The solution

TaiSan has developed a novel polymer electrolyte and sodium metal anode that boosts battery

energy density, while keeping costs low. The IP is in new material design and its process. An ideal interface is generated between electrolyte-electrodes to ensure a high cycle life and utilise existing Li-ion battery production lines to scale.

Value proposition

• Smaller and lighter battery packs in EVs. • Reduced costs - maximising benefits and profit margins.

108

• Enhanced safety, eliminating fire risk. • Improved LCA metrics by not using lithium, nickel, cobalt and copper metals.

Customer references

TaiSan is in close discussions with number of Tier 1 automotive and battery OEMs. So far, 19 non-binding MoUs are signed with prospective OEM customers.

Energy storage MARKET

BATTERY INDUSTRY

SUB MARKET

INDUSTRY

PRODUCT

THE BATTERIES

the Batteries BOOTH #

C22 CLICK OR SCAN

Pl. J. Kilińskiego 2, 35-005 Rzeszów, Podkarpackie

Poland

thebatteries.tech

TRUSTED BATTERY INNOVATION PARTNER FOR HIGHPERFORMANCE DEVICES & IOT COMPONENTS

j.krolik@thebatt.tech

Starting sales

The need

Design trade-offs are unacceptable in high-stake applications, such as in aerospace, defence and in critical IoT. Conventional batteries force a compromise between energy, safety, life cycle and size. Customers need zero-compromise power sources that perform flawlessly at all times.

The solution

The Batteries deliver zero-compromise energy solutions through proprietary Plasma-Based Deposition Technology. Hybrid PVD Packs provide customised, mission-critical performance for aerospace, defence, and in industrial systems, while All-PVD

Microbatteries power IoT and advanced devices supporting miniaturisation. Both product lines achieve radical gains in energy density, safety, cycle life, and temperature resilience, empowering customers to innovate without battery limitations.

Value proposition

• Breakthrough products with solid-state batteries. • Zero-compromise performance when it matters most. • High energy density. • Long life cycle. • Wide temperature resilience and unmatched safety. • Backed by a patented scalable production platform and proven customer validation.

Customer references

Ongoing custom battery projects for producers of drones and radiocommunication devices. ASSB Microbatteries’ evaluation pipeline of applications includes industrial sensors operating in harsh environments, special solutions for IoT and RFID (tracking, retail applications, indoor positioning, RTLS), medical devices (ultra-reliable batteries for active implants, mini glucose trackers, insulin pumps), automotive solutions (tyre sensors with energy harvesting), and aerospace applications (aerospace sensors and storage). Received feedback confirms high business interest in The Batteries’ products.

109

InnoEnergy | TBB 2026 MARKET

TRANSPORT & MOBILITY

PRODUCT

BATTERY-CELL MANUFACTURER FOR SOUTHERN EUROPE

Verkor BOOTH #

C23 CLICK OR SCAN

2-4, Rue Charles Berthier 38000 Grenoble, Isère

France

verkor.com philippe@verkor.com

BATTERIES. NOW. FOR THE FUTURE

Pilot

The need

The battery-driven electric vehicle market will expand significantly over the next few years given stricter EU legislation on CO2/km emissions, lower total cost of ownership of EVs and improved customer experience. In southern Europe, some 100 to 170 GWh of battery cells will be required by 2030.

The solution

Founded in July 2020, Verkor is a French industrial company based in Grenoble. The company is accelerating the production of low-carbon batteries in France and Europe to meet the growing demand for electric vehicles,

electric mobility in general, and stationary storage in Europe. Verkor will open its fully digital 4.0 pilot line in 2023. A model of excellence, competitiveness and resource efficiency, its innovation will be integrated into the Gigafactory planned for 2024.

• Verkor is supported by InnoEnergy, IDEC Group, Schneider Electric, Capgemini, Renault Group, EQT Ventures, Arkema, Tokai COBEX, Demeter-managed FMET, Sibanye-Stillwater, Plastic Omnium and Bpifrance.

Value proposition

Customer references

• An attractive business model in terms of agility, sustainability and governance. • The best talent in the field; a strong, agile team grows to meet new challenges. • Brings together the best partners to localise the entire value chain in Europe, ensuring optimal use of skills and resources.

110

Renault Group and Verkor have entered a long-term partnership to supply 12 GWh per year of batteries for electric vehicles. These high-performance, low-carbon batteries will be produced in the future Verkor Gigafactory in Dunkirk, France.

Energy storage MARKET

BATTERY INDUSTRY

PRODUCT

VDX BATTERY DIAGNOSTICS ENGINE

volytica diagnostics BOOTH #

C24 CLICK OR SCAN

Theresienstraße 18, 01097 Dresden, Saxony

Germany

volytica.com claudius.jehle@volytica.com

BATTERY DIAGNOSIS AS A SERVICE

Consolidated sales

The need

Batteries degrade: chemistry and exterior influences interact resulting in hugely variable end-of-life criteria. The inability of manufacturers and end users to determine the most economical replacement time leads to waste in productivity, usable lifetime and material of €30bn per annum from 2025.

The solution

schedule. Ten years of research has been forged into a scalable cloud platform. By utilising signals that every modern battery system provides, a vdx engine calculates stress levels, replacement times and proposes mitigation strategies, offering a lifecycle management tool for battery assets, accessible for a broad range of industries. With volytica, battery diagnostics become an industrial commodity.

Value proposition

• Battery diagnostics accessible for a broad range of industries. • Easy to integrate into existing processes and tools. • Minimal entry barriers and applicable to a vast range of applications. • By making use of our services, at least 10% usable lifetime can be extracted from one and the same battery.

Customer references

This software solution makes degradation effects transparent and optimises the replacement

Available on request.

111

InnoEnergy | TBB 2026

112

ENERGY CONSUMPTION

&Charge GmbH.................................. 114 AC Biode............................................. 115 AEInnova............................................. 116 ALPINOVX............................................117 Beholder............................................. 118 Betterspace Group........................... 119 Bin-e....................................................120 Candam Tech..................................... 121 Catalyco..............................................122 Clevergy...............................................123 COAT-IT...............................................124 DC Brain..............................................125 Descarbonize.....................................126 EcoBean..............................................127 ecop Technologies GmbH..............128 Elaphe.................................................129 Energy Floors (SDC).........................130 FineCell............................................... 131 FlexiDAO.............................................132 Geolinks Services.............................133 Gradis..................................................134 GravitHy..............................................135

Heat Power.........................................136 Incitis................................................... 137 Jolt Electrodes.................................138 Kore Metals........................................139 LignEasy............................................. 140 MAQ AB............................................... 141 Navlandis............................................142 NitroCapt............................................143 Nordic SeaFarm............................... 144 Nordluft Automation.......................145 Orchestra Scientific........................ 146 Percyroc..............................................147 Pionierkraft........................................ 148 Qien..................................................... 149 Routal..................................................150 Scoobic............................................... 151 Stockholm Water Technology.......152 Swobbee.............................................153 Tribonex AB........................................154 Verv......................................................155 Waybler...............................................156 ZPARQ..................................................157

InnoEnergy | TBB 2026 MARKET

TRANSPORT & MOBILITY

PRODUCT

&CHARGE

&Charge GmbH BOOTH #

CLICK OR SCAN

Neue Rothofstraße 13-19, 60313 Frankfurt am Main, Hessen

Germany

b2b.and-charge.com simon@and-charge.me

LET’S IMPROVE CHARGING Consolidated sales

The need

As part of the new e-mobility ecosystem, charging station operators are taking over the construction and operation of e-car charging stations in public spaces. Challenges to overcome include enhancing reliability, creating a seamless customer experience and boosting profits.

The solution

The one-stop-shop for station related services – &Charge delivers a fully integrated platform that detects issues at public charging stations,

orchestrates operations, and drives higher station performance and usage.

Value proposition

• Incidents detected and reported in real time, enabling immediate action by charging station operators. • Trusted service partners with flexible SLAs ensure fast, reliable, and cost-efficient operations. • Certified technicians are deployed smarter and faster, maximising maintenance efficiency.

114

• EV driver feedback is instantly transformed into actionable insights, closing the loop between users and operations. • The result: significant cost reductions and maximised uptime across the charging network.

Customer references

Customers: IONITY, Aral Pulse, Allego and mer Strategic partnerships with: Elli, Audi, Porsche, Polestar.

Energy consumption MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

RENEWABLE GAS & BIOFUELS

PRODUCT

PLASTALYST - CHEMICAL RECYCLING

AC Biode BOOTH #

CLICK OR SCAN

rue du 31 Août 1942 7, L-5809 Hesperange

Luxembourg acbiode.com

CHEMICAL RECYCLING OF DIFFICULTTO-RECYCLE PLASTICS, CFRP, E-SCRAP, TEXTILES INTO MONOMERS, HYDROGEN, METHANOL.

tadashi.kubo@acbiode.com

Pilot

The need

Only around 15% of plastic waste is being recycled. For complex wastes, such as e-scrap, PVC, CFRP, FRP, tires, textiles, shoes and solar panels this number is even lower.

The solution

For companies struggling to recycle their waste, Plastalyst recycles organic waste and plastic waste into chemicals such as monomers, hydrogen, carbon monoxide and methanol.

Uniquely, the process is below 200°C, produces no CO2 and only uses water as a solvent. Pilots have been completed to decompose mixed, multi-layered plastic waste mixed with biological waste, including PVC, CFRP, FRP, tires, textiles, shoes and solar panels. The first commercial plant is planned for 2027.

Value proposition

• Decomposes plastics efficiently on site, from polymer to monomer, at a lower temperature (below 200°C) and pressure than competitors. • Unlike current technologies, Plastalyst produces no dioxin, GHG emissions, or tar. • Catalysts can be sold to chemical or waste management companies or licensing provided of the technology.

Customer references Available on request.

115

InnoEnergy | TBB 2026 MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

INDUSTRY

PRODUCT

INDUEYE

AEInnova BOOTH #

CLICK OR SCAN

Pare Llaurador Street, 169, 08224 Terrassa, Barcelona

Spain

aeinnova.com raul.aragones@aeinnova.com

WIRELESS LONG-RANGE EDGE COMPUTING IOT ARCHITECTURE POWERED BY WASTE HEAT

Starting sales

The need

Industries need sensors for predictive maintenance but face issues with connectivity and power. Wired sensors are costly to install, while wireless ones rely on lithium batteries, which are expensive to maintain, require replacements, and harm the environment throughout their lifecycle.

The solution

self-powered, wireless industrial IoT sensors use thermoelectric technology to generate the necessary electricity in a clean and continuous way by converting surface heat from machines into green power. Our sensors are compliant with ATEX and IECEx standards and are integrated into data management software, providing the optimal solution for asset condition monitoring in large industrial facilities.

AEInnova offers a revolutionary solution by eliminating the need for lithium batteries. Our

• Delivers a high-performance and environmentally-friendly solution. • Significantly reduces costs. • Compliant with ATEX and IECEx standards. • Integrated into data management software. • Empowers the next generation of Industry 4.0.

Customer references

Repsol, Celsa, ENEL, Ferrovial, TUBACEX, SACYR, CEMEX, Ercros, Moeve and so on.

116

Value proposition

Energy consumption MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

HEATING & COOLING

PRODUCT

GEN 4

ALPINOVX BOOTH #

CLICK OR SCAN

176, rue de la Cuche Veurey-Voroize

France

alpinovx.com thomas.vinard@alpinovx.com

HIGHLY EFFICIENT COLD POWER GENERATION

Pilot

The need

Cold power generation needs to minimise energy consumption and its corresponding CO2 footprint. One vital focus of improvement is to significantly increase the efficiency of thermal convertors.

The solution

AIRCO X, developed and produced by ALPINOVX, is a brand new “green” cold

generator. There are no use of chemicals or greenhouse gases and it is highly efficient. The promise of such equipment is to allow the global cold power industry,data centres, district cooling operators and the food industry for example, to run their activities with very reasonable costs (capital expenses, capex, and operating expenses, opex).

Value proposition

• Decreased CO2 footprint linked to cold chain industry operations. • Data centres, district cooling operators turnover consolidated.

Customer references Engie.

117

InnoEnergy | TBB 2026 MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

INDUSTRY

PRODUCT

AI FOR SUSTAINABLE MINERALS EXPLORATION

Beholder BOOTH #

CLICK OR SCAN

Kesklinna linnaosa, Ahtri 12, 10151 Tallin, Harju maakond

Estonia

beholder.earth daniil.lubkin@beholder.earth

WEB GIS POWERED WITH AI FOR THE EXPLORATION OF CRITICAL MINERALS

Starting sales

The need

By 2050, some 3 billion electric vehicles will require trillions of batteries, and the critical minerals market will be worth some 12 trillion dollars. However, exploration of minerals takes 20 times more effort than it did 30 years ago, with only 2% of prospects becoming a mine.

The solution

Beholder has developed an AI for the quick, precise and sustainable exploration of critical mineral deposits, enabling geological research to be upscaled. This state of the

art neural network combines 49 data inputs over 200 models to make efficient predictions of mineral deposits with an up to 96% accuracy rate.

Value proposition

• Mining companies receive access to geological insights with a pricing model based on the size of the project. • Investors and banks receive risk clarification and an efficient assessment before a decision is made. Prices are based on project schedule and loan duration.

118

Customer references Projects ongoing:

• Star Energy National Scale geothermal exploration in Indonesia ( Sumatra ) 19 000 km2 LSEM. • Bumi Resources initial CRM Bengkulu 1500 km2 • UMGI - Balkanes Clays and REEs 2 km2 • GOLD + Neobium in Tanzania 400 km2 • Happy 2 mine - copper mine in Arizon USA 40 km2 ( brownfield extention ) • National Scale Aceh region geological modeling. (Government of Aceh).

Energy consumption MARKET

NON-RESIDENTIAL BUILDING

PRODUCT

BETTER.ENERGY

Betterspace Group BOOTH #

CLICK OR SCAN

Oberpörlitzer Straße 2, 98693 Ilmenau, Thuringia

Germany

betterspace360.com sales@betterspace360.com

INTELLIGENT ROOM CONTROL FOR NON-RESIDENTAL BUILDINGS

Consolidated sales

The need

High energy costs, legal requirements (such as GEG) and ESG targets make it an imperative that companies and public institutions act. However, many non-residential buildings lack digital control and transparency, especially in existing properties without up-to-date infrastructure.

The solution

A cloud-based IoT platform built using LoRaWAN technology that can be integrated into existing buildings without structural changes. better.energy enables automated, occupancy-based control of radiators and fan coils,

as well as digital monitoring of heat consumption. Through smart sensors, intelligent algorithms and open interfaces (Open API), energy use is optimised on a room-by-room basis, across multiple locations and in real time.

Value proposition

• Up to 35% reduction in energy consumption and CO₂ emissions – without compromising user comfort. • Rapid deployment without structural modifications or disruption to existing IT systems.

• Scalable and interoperable – ideal for large property portfolios and decentralised organisations. • Fully transparent control through digital consumption data and centralised management. • Future-proof and ESG compliant with adherence to legal energy efficiency standards.

Customer references

Over 800 locations across Germany, Austria, and Switzerland equipped with more than 155,000 IoT components, including hotels, nursing homes, educational institutions, municipalities, and public buildings.

119

InnoEnergy | TBB 2026 MARKET

NON-RESIDENTIAL BUILDING

PRODUCT

BIN-E AI, SMARTB, BIN-E REWARD & BIN-E RETURN

Bin-e BOOTH #

CLICK OR SCAN

Innowatorów 8, 62-070 Dąbrowa, Wielkopolska

Poland

bine.world

ADVANCED AI-BASED SMART BINS THAT SORT AND DEPOSIT REFUNDS AUTOMATICALLY, OPTIMISING RECYCLING

contact@bine.world

Consolidated sales

The need

Implementing an efficient waste-sorting system in public spaces is notoriously challenging. Traditional methods are inefficient and expensive and lack digitisation. The popularity of deposit systems amplifies the need for a specialised solution.

The solution

Bin-e AI radically improves recycling in public areas: AI automatically identifies and sorts out waste, with an over 95% accuracy rating. Bins collect and compile data for corporate social responsibility (CSR) reports, optimising waste management. The SmartB system separates specific waste, including e-waste and batteries, while Bin-e Reward delivers incentives to users. For deposit

systems, Bin-e Return provides a user-friendly, supremely-specialised solution.

Value proposition

• Ensures raw materials are sorted correctly including complicated types, such as e-waste and lightbulbs. • Packaging travels straight to recovery without having to be reprocessed in sorting plants, increasing the efficiency of the recycling chain. • Optimises waste management, reducing costs for the infrastructure owner. • Customised content can be displayed allowing businesses to make recycling more engaging and promoting CSR initiatives. • Incentivises user behaviour in support of electronics’ second life.

120

Customer references

Our customer base includes global corporations, facility management companies, and municipalities. Bin-e has a unique partnership with AMBILAMP in Spain, where we developed the world’s first AI smart waste bin for segregating e-waste. Following a successful pilot test, smart bins were installed in major shopping centers, paving the way for a full Spanish market entry. This collaboration also led to the creation of Smartb, an intelligent deposit device designed for collecting specialised waste fractions such as batteries, cosmetics packaging, toner cartridges, and coffee capsules.

Energy consumption MARKET

SOLUTIONS FOR MUNICIPALITIES

SUB MARKET

MUNICIPALITY

PRODUCT

RECYSMART

Candam Tech BOOTH #

CLICK OR SCAN

Sant Adria 66, Nave 8, 08030 Barcelona

Spain

candam.eu benjamin.varese@candam.eu

A UNIQUE COST-EFFECTIVE TECHNOLOGY TO INCREASE PACKAGING RECOVERY RATES

Consolidated sales

The need

Waste services need affordable and scalable technologies to apply the correct incentives policies and increase packaging recovery rates to comply with EU legislation.

The solution

RecySmart offers a stand-alone IoT device with Europe-wide patented technology that turns any waste bin into a smart bin. Fully adaptable to existing bins,

the patented Smart Ring system recognises all types of packaging material in real time thanks to acoustic techniques combined with AI algorithms. Packaging recovery rates are incentivised with easy and affordable Return and Earn schemes.

Value proposition

• Increases packaging recovery rates. • Digitises the waste cycle.

• Universal Scanning and AI characterisation enables double verification of the packaging material.

Customer references

Valoriza Sacyr, FCC, PreZero, Saubermacher, Sotkon, CIty Council of Madrid, City Council of Guadalajara, City Council of Higueruelas, City Council of Debabarrena, City Council of Torrelavega, Camping Sangulí.

121

InnoEnergy | TBB 2026 MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

INDUSTRY

PRODUCT

CATALYCO’S SUSTAINABLE METAL OXIDES

Catalyco BOOTH #

CLICK OR SCAN

Uriekstes street 3/k-1, LV-1005 Riga

Latvia

catalyco.eu

A CIRCULAR SUPPLY CHAIN FOR FUNCTIONAL METAL OXIDES, RECOVERING ZNO, CUO, AND NIO FROM INDUSTRIAL WASTE TO STRENGTHEN EUROPE’S RAW MATERIAL RESILIENCE.

rs@catalyco.eu

Pilot

The need

Zinc oxide (ZnO) is vital for tires, rubber, ceramics and chemicals, with no scalable substitute and rising demand. Europe imports 40% mainly from China and the US, impacting stability. Local waste streams hold large ZnO reserves, but cause pollution if unused.

The solution

Catalyco recovers high-purity ZnO from chemical and metallurgical waste, creating a closedloop system that supports the circular economy. Our process secures an alternative ZnO supply for Europe, reduces

greenhouse gas emissions, saves energy, cuts raw material use and diverts industrial waste from landfills – helping to meet EU climate goals.

Value proposition

• The process developed to extract ZnO from industrial waste streams helps to establish a local supply chain. • The chemical industry gains from the promotion of a circular economy and in enabling the reuse of materials, reduces costs and ensures a more secure supply of materials.

122

• The rubber industry benefits from reduced consumption and costs by utilising recovered materials, improving rubber characteristics, and complying with legislation.

Customer references

Advancing through qualification stages with major customers such as Saint-Gobain, Envalior, and Dunlop. First sales of paid samples achieved. Tests conducted with major tire and chemical companies, and letters of intent received from Yokohama, Lanxess (now Envalior), and Höganäs.

Energy consumption MARKET

RESIDENTIAL BUILDINGS

PRODUCT

CLEVERGY - ENERGY MANAGEMENT & FLEX

Clevergy BOOTH #

D10 CLICK OR SCAN

C. de Moreno Nieto, 2, 28005 Madrid

Spain

clever.gy beltran.aznar@clever.gy

RESIDENTIAL FLEXIBILITY AT SCALE.

Consolidated sales

The need

Utilities are under pressure from three fronts at once: rising churn and thin margins, a fast-growing prosumer base (solar, battery, EV) they don’t serve digitally, and mounting expectation to participate in flexibility and distributed-energy markets. Building the customer-facing technology for asset orchestration in-house takes years and millions, with no guarantee of success.

The solution

Clevergy is a white-label SaaS platform that helps utilities keep their customers longer and manage their distributed energy, going live in weeks with no hardware needed. It covers the management and optimisation of distributed assets like solar, battery, EV and heat pumps. From

there it adds a flexibility layer that aggregates and orchestrates all that distributed energy across a utility’s entire customer base and turns it into a manageable, monetizable flexibility asset.

Value proposition

• One platform, the full picture. Monitor, control and optimise solar, batteries, EVs and heat pumps from 55+ brands, unified with consumption data and your own systems, across your whole customer base. • Frictionless onboarding in three steps. Assets connected in seconds. • Beyond monitoring, smart charge and discharge algorithms that maximise household savings and respond to price and grid signals from a single control centre.

• Prosumers with managed assets stay 54% longer and generate 20% more revenue through value-added services. • Build or scale your residential flexibility strategy, unifying and orchestrating distributed assets today. • Deploy easily in weeks. No migrations or integration effort.

Customer references

20+ utilities 500,000+ connected homes 250 connected MW Some examples include: • Naturgy (2022): enrichment of their client app with Energy Insights • Repsol, Solar360 (2025): full white label app for monitoring solar installations • Galp (2025): powered their platform with smart charging technology 09

123

InnoEnergy | TBB 2026 MARKET

TRANSPORT & MOBILITY

PRODUCT

INVISIBLE, YET ESSENTIAL

COAT-IT BOOTH #

D11

CLICK OR SCAN

ul. Mościckiego 1, 24-110 Puławy

Poland

coat-it.pl marek@coat-it.pl

COATINGS R&D HUB FOR SURFACE SOLUTIONS THAT LAST LONGER AND CONSUME LESS. FROM PROTECTIVE AND FUNCTIONAL COATING TO GLOBAL-SCALE IMPACT.

Starting sales

The need

Manufacturers need to improve the durability and performance of protective coatings without investing in costly process changes or requalifications.

The solution

COAT-IT offers innovative solutions in surface treatment, focusing on advanced protective coatings. Thanks to extensive research and experience, electrochemically-produced coatings

are enhanced by introducing nanoparticles that significantly improve their properties, boosting durability, performance and resistance. Products seamlessly integrate with existing production processes, without the need to modify current technologies.

Value proposition

• Delivers cutting-edge surface treatment solutions by integrating nanoparticles into electrochemical coatings.

124

• No disruption to existing production line. • Longer lifespan. • Objects retain their value. • Safer devices. • Less frequent repairs and scrap metals. • Material savings ~25% Low CO2 emissions -15% • More plating cycles.

Customer references Available on request.

Energy consumption MARKET

TRANSPORT & MOBILITY

PRODUCT

DCBRAIN AI

DC Brain BOOTH #

D12

CLICK OR SCAN

46, rue de l’Echiquier , 75010 Paris

France

dcbrain.com bruno.lacoste@dcbrain.com

AI FOR A SUSTAINABLE SUPPLY CHAIN

Consolidated sales

The need

The supply chain is growing ever more complex. There is more and increasingly varied data to be processed, and decarbonisation means rising costs and more challenging requirements.

The solution

DCbrain has developed a dedicated, engaged and sustainable AI solution aimed at supply chain

planners. It offers significantly greater control in decarbonising and dynamically adapting the supply chain while also simplifying the routine daily work of planning.

Value proposition

• An engaged and sustainable AI solution. • A dedicated solution for logistics flow planning.

• A controlled and innovative solution that has demonstrated its value. • Positively contributes to the economic and environmental performance of logistics operations.

Customer references

Stef, Heppner, Redur, Lidl, Ceva Logistics, Gefco, Daher, Italgas, Regaz.

125

InnoEnergy | TBB 2026 MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

INDUSTRY

PRODUCT

DESCARBONIZE

Descarbonize BOOTH #

D13

CLICK OR SCAN

P.º de la Castellana, 18th floor 259, 28046 Madrid

Spain

descarbonize.com/en julio@descarbonize.com

TAKING CONTROL OF SUPPLY CHAIN EMISSIONS

Starting sales

The need

Global and EU-level market demands and regulation directives task companies with accurate reporting of carbon emissions. However, a large proportion of emissions happen in supply chains (ie. Scope 3), which are hard to measure as they belong to third parties and not the company.

The solution

Descarbonize has developed software as a solution that acts as a white label to allow for suppliers to input, analyse and create carbon emission reduction scenarios. Companies can see what their supplier’s impact is, and how much is attributable to them. Both sides can generate scenarios to reduce their impact by identifying hotspots.

Value proposition

• A dedicated solution for companies’ Scope 3 emissions (supply chains). • SaaS reliability and user friendliness. • Adapts to multiple organisational boundaries and structures and their entire supply chains. • Facilitates the reduction of emissions, helping the company and the planet.

Customer references ENGIE, CBT, COMGAS.

126

Energy consumption MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

INDUSTRY

PRODUCT

ECOBEAN

EcoBean BOOTH #

D14 CLICK OR SCAN

Koszykowa 75, 00-662 Warsaw

Poland

ecobean.pl contact@ecobean.pl

TURNING COFFEE WASTE INTO SUSTAINABLE CHEMICALS

Pilot

The need

Each year, the coffee industry generates some 4.5 million tonnes of spent coffee grounds (SCG), a so-called waste product that has been historically squandered. This isn’t just an environmental burden, it’s a massive untapped economic opportunity.

The solution

EcoBean delivers an industrial solution for coffee waste valorisation, turning spent coffee grounds into sustainable high-quality ingredients for fast-growing markets. Our plugand-play technology integrates effortlessly into instant coffee production, monetising waste into upcycled ingredients for the beauty, food and materials industries-at scale.

Value proposition

• Patented technology for industrial coffee waste valorisation. • Plug and play technology. • New revenue stream for the coffee industry. • High quality ingredients for cosmetics, food and material industries.

Customer references Available on request.

127

InnoEnergy | TBB 2026 MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

INDUSTRY

PRODUCT

THE ROTATION HEAT PUMP

ecop Technologies GmbH BOOTH #

D15

CLICK OR SCAN

Ricoweg 37, 2351 Wiener Neudorf

Austria

ecop.at/en/home-4 fabian.sacharowitz@ecop.at

EFFICIENT HIGH TEMPERATURE HEAT PUMP FOR INDUSTRIAL APPLICATIONS

Starting sales

The need

Heat production up to 200°C in industry is responsible for ~5% of global energy consumption - for which over 90% fossil fuels are still used today. Hightemperature heat pumps that can provide heat up to 200°C sustainably using waste heat are therefore urgently needed.

The solution

ecop’s rotation heat pump technology is based on a pure gas process that enables industrial companies to convert their heat production up to 200°C from natural gas to green electricity.

In contrast to conventional heat pumps, the heat pump technology does not use F-gases or flammable refrigerants. As ecop’s rotation heat pump can also achieve very high temperature lifts with high efficiency, it is an optimal solution for many applications in industry, district heating and geothermal energy.

Value proposition

• Capable of attaining -30°C - 200°C heat efficiently over the whole temperature range, with long-term stability and temperature lift of up to 100K.

128

• High COP even at lifts up to 100K. • Outstanding cooling properties. Ideal if the rotation heat pump is used for cold- and heat production at the same time. Cold and Heat can often be provided with little more electrical energy than is needed for the chillers anyway. Example: datacenter, Dairy industry, etc. • Practically no risk to the environment in contrast to other technologies (toxic and poisonous working media etc.).

Customer references Available on request.

Energy consumption MARKET

TRANSPORT & MOBILITY

PRODUCT

ELAPHE PROPULSION SOLUTION

Elaphe BOOTH #

D16 CLICK OR SCAN

Teslova 30, 1000 Ljubljana, East Europe

Slovenia

in-wheel.com customer@elaphe-ev.com

A GLOBAL LEADER IN ELECTRIC IN-WHEEL PLATFORM TECHNOLOGY

Consolidated sales

The need

The electric vehicle architectures of today do not exploit technologies with the potential to reduce costs, or use software-defined vehicle behaviour to achieve superior performance, safety and comfort. Manufacturers typically add more hardware instead of redefining the architecture.

The solution

Elaphe’s distributed drive architecture offers a paradigm shift in vehicle design using automotive-grade electric motors placed inside each rim. This enables complete control of the sole contact point of a vehicle to the ground, and a massive reduction of space used for the powertrain creating numerous opportunities

to optimise the vehicle in terms of cost, function and mission. Elaphe is the first and only company that has launched this technology commercially in passenger vehicles.

Customer references

Value proposition

Aptera Motors (USA)

• Significant cost reduction on vehicle level. • Decrease in vehicle overall energy consumption (not only an increase in efficiency!) • Ultimate control of each wheel for enhanced safety, performance and comfort. • Minimal powertrain footprint – increased cabin space and modular platform designs. • Shorter assembly lines – reduced overheads. • Advanced motion capabilities.

Leitner (Italy)

• ConnX Mobility • PlatformDevelopment of certified ground vehicle • Aptera 3e Performance and Standard edition vehicles • Development of powertrain for series production PSA & Brembo (France, Italy) • EU-Live L5e vehicle concept • Development of In-wheel motor Multiple undisclosed vehicle manufacturers in automotive and aerospace (EU, US, China, South Korea, Japan, Brasil).

129

InnoEnergy | TBB 2026 MARKET

NON-RESIDENTIAL BUILDING

PRODUCT

ENERGY FLOORS

Energy Floors (SDC) BOOTH #

D17

CLICK OR SCAN

Directiekade 12, 3089 JA Rotterdam

The Netherlands energy-floors.com

jury@energy-floors.com

ENERGY CONVERTING FLOOR SYSTEMS FOR HIGH FOOTFALL AREAS

Consolidated sales

The need

In the fight against climate change, raising awareness about energy production and energy consumption is an important element. People need to be engaged and educated about the importance of renewable energy and how to reduce their carbon footprint.

The solution

Interactive smart floors that generate energy and make sustainability visible. They convert kinetic energy from human activity and solar energy to usable electricity. Multiple uses include generating power from dancing and data harvesting in public outdoor spaces.

130

Value proposition

• Helps meet sustainability targets, while interactively teaching about renewable energy. • Practical, educative and fun.

Customer references

Interface, Dura Vermeer, Kerkebosch Zeist, ABN Amro, Russian Railway Research Institute.

Energy consumption MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

RESIDENTIAL BUILDINGS

PRODUCT

CELLULOSE MICRO-/NANOFIBERS

FineCell BOOTH #

D18 CLICK OR SCAN

Teknikringen 58, 11428 Stockholm

Sweden

finecell.se

CELLULOSE MICRO-/NANOFIBERS FOR ENHANCED PRODUCT PERFORMANCE AND REDUCED CARBON FOOTPRINT

joachim.reimer@finecell.se

Starting sales

The need

Bio-based and bio-degradable high-performance materials are required to enable manufacturers to phase out harmful and fossilbased chemicals, e.g. microplastics, and reduce the carbon footprint of their products.

The solution

FineCell has developed sustainable cellulose micro-/nanofibers to help manufacturers make more sustainable products using bio-based raw materials. This

solution helps replace fossil and often harmful chemicals with healthy alternatives.

Value proposition

• The easily-dispersed product saves significant amounts of energy in transportation and use. • Stabilises emulsions and dispersions. • Tunes rheological properties of liquid and gel formulations. • Enables easy spread and spray of thick formulations.

• For personal care: improves moisturising effects, carrier for active ingredients, excellent biocompatibility, film forming, great skin feel, neither greasy nor sticky. • For paints & coatings: improves mechanical properties (e.g., scratch resistance). • Other applications: packaging, water cleaning, superaborbents.

Customer references Available on request.

131

InnoEnergy | TBB 2026 MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

INDUSTRY

PRODUCT

FLEXIDAO

FlexiDAO BOOTH #

D19 CLICK OR SCAN

Pallares 99, 08037 Barcelona

Spain

flexidao.com d.terpstra@flexidao.com

UNLOCKING OPERATIONAL AND COST EFFICIENCIES AT SCALE FOR CLEAN ENERGY BUYERS

Consolidated sales

The need

Energy buyers must navigate risks associated with a surge in renewable energy contracts, tighter regulations and outdated data systems. This leads to billing errors of up to 17%, a 21% compliance rejection rate and widespread inefficiencies that impact performance and hinder decision-making.

The solution

Flexidao helps energy buyers streamline contract tracking, automate invoice checks, and forecast contract performance. It simplifies EAC management with a centralised, audit-ready system for CSRD/CDP compliance. Additionally, it enables 24/7 carbon-free strategies with hourly data and emissions tracking.

Value proposition

• Eliminates over 90% of manual data management workload.

132

• Businesses can avoid over $100k in contract risks. • Businesses can save with smart procurement insights. • Yearly billing discrepancies of up to 2% can be uncovered. • Prompts confident CDP, RE100 and CSRD reporting. • Sources high-quality, fairly priced EACs.

Customer references

Iron Mountain. Google. Microsoft. Cellnex. Vodafone. Bekaert. Veolia.

Energy consumption MARKET

ENERGY STORAGE SOLUTIONS

SUB MARKET

HYDROGEN & E-FUELS

PRODUCT

FLOWTERRA

Geolinks Services BOOTH #

D20 CLICK OR SCAN

61, rue de Lyon, 75012 Paris

France

geolinks-services.com frederic.moinet@geolinkservice. com

Pilot

The need

Energy operators need to enhance the control and surveillance of the subsurface at their industrial sites. They also require an environmentally acceptable monitoring system that is easy to install and flexible.

The solution

A highly-innovative monitoring solution, FlowTerra™ utilises the natural and free-of-charge energy propagating at the subsurface to deliver key subsurface information. It then transforms it into a service encompassing three functions: diagnosis, monitoring and data enhancement. A primary

INNOVATIVE, SAFE AND FLEXIBLE SUBSURFACE MONITORING objective is to improve preventive maintenance systems, shifting from reactive to proactive approaches. Implemented for the long term, FlowTerra provides essential early warning capabilities.

Value proposition

• Efficiently monitors and detects fluid movements in the subsurface. • Improves preventive maintenance systems, shifting from reactive to proactive approaches. • Implemented for the long term, providing early warning capabilities.

• Helps secure operations and discovery of sustainable, non-carbon resources, such as natural hydrogen.

Customer references

Mining: Anglo American, De Beers, Glencore, SRK Consulting CCS and Gas storage: Baker Hughes, Geostock, Equinor, Enagaz, Terega, Storengy Hydrogen: CVA, 45-8 Energy, Storengy, Terrensis Geothermal: Total Energies, TLS Geothermics, Kalyosphere Water management: Setec, BRGM.

133

InnoEnergy | TBB 2026 MARKET

SOLUTIONS FOR MUNICIPALITIES

SUB MARKET

MUNICIPALITY

PRODUCT

G.PLATFORM

Gradis BOOTH #

D21

CLICK OR SCAN

Jasnogorska 9, 31-358 Kraków

Poland

gradis.pl

END-TO-END SOLUTION COVERING ALL STEPS OF OUTDOOR LIGHTING MANAGEMENT FOR CITIES, UTILITIES AND FIXTURE VENDORS

biuro@gradis.pl

Consolidated sales

The need

Grid overloads, network losses and rising renewable curtailment cost operators billions each year, yet grid data is often incomplete. EU AI Act and NIS2 rules demand explainable AI and data sovereignty, ruling out black-box cloud tools in critical infrastructure.

The solution

Gradis Graph XAI, a proprietary decision engine, combines graph grammars with machine learning. It builds on more than 15 years of research at AGH University in Kraków. Instead of treating data as tables, the engine models infrastructure as a graph of physical and spatial dependencies, so a change at one node is instantly reflected across the network. It works with only 60–70% sensor coverage, estimating missing

values from topological correlations, and every decision can be traced step by step. The engine runs fully on-premise and powers four product lines: Virtual Grid Manager (VGM) for predictive grid management, the PhoCa lighting design and control platform, a live Digital Twin of the network, and Private AI/LLM solutions, already optimised 1.5 million lighting points in more than 100 cities.

Value proposition

• Overload prediction 2-3 weeks in advance and predictive maintenance of transformers. • Up to 75% reduction in renewable energy curtailment through selective limitation. • 10-20% CAPEX savings by avoiding grid oversizing, and 10-20% reduction in network losses.

134

• Optimal siting and sizing of energy storage (Grid-Fit). • Reliable operation on incomplete data, at 60-70% sensor coverage. • Explainable and traceable by design, ready for the EU AI Act, with on-premise deployment for NIS2-compliant data sovereignty. • Vendor-agnostic integration with SCADA, DMS, AMI, GIS, BMS, renewables, storage and lighting control. • Photometric calculations 97% faster (from weeks to hours) and over 70% energy savings in lighting projects.

Customer references

GE Lighting, Schreder, Pabianice Municipality, Tbilisi Master Plan.

Energy consumption MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

INDUSTRY

PRODUCT

GRAVITHY

GravitHy BOOTH #

D22 CLICK OR SCAN

Les Docks Atrium 10.26 10 Place de Joliette 13002 Marseille

France

gravithy.eu contact@gravithy.eu

SUSTAINABLE IRON. GREENER STEEL.

Early stage

The need

Steel is a strategic material in the transition to a low-carbon economy. However, the coal used for its production is responsible for over 8% of global CO2 emissions. Decarbonising the steel value chain is essential to achieving a C-neutral society. It can only be done by rethinking iron production.

other locations. Using hydrogen to react with iron ore avoids the CO2 emissions of traditional methods. The product is HBI, which can be used as feedstock for low-CO2 steel production. By decarbonising steel production, GravitHy supports the EU’s pledge of carbon neutrality and responds to a growing demand for low-CO2 steel products.

Value proposition

The solution

GravitHy plans to build and operate its first low-CO2 iron plant in Fos-sur-Mer (France) and then build further plants in

• Brings together the commitment and competencies of best-in-class, purpose-led

stakeholders to redefine the way iron and steel are produced and sold worldwide. • Unites experienced professionals while attracting and forging young talent. • Plants designed with best available technologies. • Profitable business model based on cost competitiveness. • Excellence in a superior product line. • Works in close collaboration with players representing the entire value chain.

Customer references Available on request.

135

InnoEnergy | TBB 2026 MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

INDUSTRY

PRODUCT

HEAT POWER

Heat Power BOOTH #

D23 CLICK OR SCAN

Saxofoonstraat 8, 5702 KC Helmond

The Netherlands heatpower.nl

henk@heatpower.nl

SUPERCHARGED STEAM TURBINE SYSTEMS FOR INDUSTRIAL HEAT AND POWER

Starting sales

The need

The competitiveness and environmental impact of heat intensive industrial processes can be much improved by reducing the use of energy.

The solution

A turbine capable of providing heat and power for industrial processes at a significantly reduced fuel cost and with minimum CO2 emissions. The system is capable of providing

both steam and power at fast response times. Its multi fuel capability can be applied to waste streams, enabling manufacturers to achieve higher resource utilisation, reduced cost of energy and green manufacturing. It acts as an add-on to boiler and furnace systems, has components with a track-record and is modular.

Value proposition

Customer references Available on request.

• CO2 emission reduction.

136

• Flexible decentralised energy supply. • Multi fuel and crude biomass furnace compatibility. • Power output boost of a steam cycle by 20%. • Rapid response time (seconds) for peak shaving. • Rigid industrial structure.

Energy consumption MARKET

TRANSPORT & MOBILITY

PRODUCT

URBAN CARGO

Incitis BOOTH #

D24 CLICK OR SCAN

92, Cours Lafayette 69003 Lyon

France

incitis.com/en bertrand.vidal@incitis.com

A GREEN REVOLUTION IN URBAN FREIGHT DISTRIBUTION

Pilot

The need

Some 70% of Europeans live in cities and rely on urban freight distribution. But there are multiple challenges to effective delivery, including efficient operation on zero emissions; safe and noiseless delivery; traffic jam avoidance; as well as fair and safe conditions for delivery drivers.

The solution

INCITIS reinvents urban truck architecture with H2SPEED. Specifically designed for urban use and the needs of delivery drivers, H2SPEED is a

pioneering delivery truck that can be loaded/unloaded on ‘even footing’. Tailor-made for the fastpaced, unpredictability of urban delivery in European cityscapes, this smart, safe vehicle emits zero emissions and makes no noise.

Value proposition

• Zero emissions, zero CO2, zero noise. • Drastic reduction of delivery time. • Two trucks can do the job of three.

• Total cost of ownership equivalent to diesel trucks, and much more economical than zero emission competitors. • Much safer for drivers, cyclists and pedestrians.

Customer references

Pre orders: XPO, Bert And You, Adam Boisson, Vandendriessche, Transgourmet, Elis Letters of intent: Fraikin, C10, Urby, Cozigou Interested: GT Solutions, Pedretti, Intermarché, Leclerc, Dachser, Stricher, Kuene & Nagel, STEF.

137

InnoEnergy | TBB 2026 MARKET

DECARBONISING THE INDUSTRY

PRODUCT

SPARKFUZE

Jolt Electrodes BOOTH #

D25 CLICK OR SCAN

C/ Botánica 107-109, 08908, L´Hospitalet de Llobregat

Spain

jolt.tech

TRANSFORMING ELECTRODE TECHNOLOGY TO UNLOCK GREEN CHEMICALS AND DECARBONISE INDUSTRY

lrizzi@jolt-solutions.com

Commercial traction

The need

At Jolt, we help industries from electrolysers to batteries and sensors scale profitably with greener, low-cost, longer-lasting electrodes. Catalysis drives the energy and chemical sectors, but it relies on outdated technology. Our advanced electrodes deliver efficiency, stability, and sustainability—unlocking the competitive edge for tomorrow’s clean energy transition.

The solution

Sparkfuze™ is a proprietary coating technology creating electrocatalytic layers via a rapid, self-sustaining reaction. Starting with catalytic ink applied by scalable spraying, it activates below 250°C, forming

durable, nanostructured coatings without harsh solvents or high temperatures. The result: industrial-grade electrodes, produced faster, with lower energy use and minimal waste.

Value proposition

• Our SPARKFUZE process introduces a 21st-century standard for catalytic coatings, unlocking several important sectors – from water to disinfection to PVCs to hydrogen, and decarbonising the industry. • Jolt electrodes are easy to integrate in existing industrial designs, yet Jolt´s patented SPARKFUZE process is transformative in terms of scaling, cost effectiveness, durability and energy efficiency.

138

• Catalysis is the invisible core at the heart of much of the energy and industry sectors yet it remains a last-century technology. • Our electrodes solve key challenges: lower cost, higher durability, greater efficiency, and tolerance to reverse current. • AI-led catalyst discovery enables faster development, optimisation and deployment of high-performance catalytic coatings.

Customer references

Ansaldo Energia, Nextchem/ Hydep + additional customers under confidentiality.

Energy consumption MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

INDUSTRY

PRODUCT

KORE GREEN SILICON

Kore Metals BOOTH #

D26 CLICK OR SCAN

12 Rue de l’Industrie, L-3895, Foetz

Luxembourg

koremetals.com joost@koremetals.com

SUSTAINABLE STRATEGIC METALS Early stage

The need

With the increasing adoption of clean technologies, such as electric vehicles and solar panels, demand for strategic metals, including silicon, is also growing. However, the production of strategic metals remains one of the most carbon-intensive activities in the industrial sector.

The solution

We are changing this trend. At the core of our mission is a breakthrough: a fully electrified, low-carbon, and low-temperature production process that reduces

emissions by more than 5 times. Our method enables the local production of strategic metals such as silicon from low-value feedstocks. It makes it cost-competitive, traceable, and reduces the bottlenecks and geopolitical risks associated with the current method’s supply chains.

Value proposition

• Cost-competitive with up to 40% lower production cost. • High-quality product - the highest purity in metallurgical grade silicon.

• Low emissions production - 5x reduction in CO2 emissions in the production process. • Feedstock independent - using low-purity quartz readily available everywhere. • Local production - produced in Europe, meeting European supply chain standards. • Traceable supply chain ensuring the customer knows where the product comes from.

Customer references Available on request.

139

InnoEnergy | TBB 2026 MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

INDUSTRY

PRODUCT

LIGNEASY

LignEasy BOOTH #

D27 CLICK OR SCAN

Eteläesplanadi 22 B 4th floor, 00130 Helsinki

Finland

ligneasy.fi juho-matti.karpale@ligneasy.fi

UNLOCKING LIGNIN ON A LARGE SCALE FROM KRAFT PULP MILLS

Starting sales

The need

Current lignin separation systems disrupt a pulp mill’s chemical balance and increase the discharge of harmful sulphate into the environment. Plywood glue producers suffer from lack of renewable feedstocks (lignin) to replace fossil-based phenol.

The solution

A novel sulphuric acid-free lignin extraction technology that produces high-value lignin and reduces a kraft pulp

mill’s emissions. The lignin is a bio-based raw material that can be used in packaging and the chemical industry. The odourless liquid concentrate or dried powder is ideal for drop-in use cases or chemical modification. Formulations are offered for using lignin as a sustainable raw material to address the demand for enhanced performance while replacing fossilbased raw materials.

Customer references Available on request.

Value proposition

• No need to burn lignin.

140

• A novel lignin extraction technology designed for pulp mills. • Affordable production of lignin for packaging and the chemical industry. • Formulations for using lignin as a key sustainable raw material to enhance performance and replace fossil-based raw materials.

Energy consumption

MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

INDUSTRY

PRODUCT

SELF-TUNING MASS DAMPER

MAQ AB BOOTH #

D28 CLICK OR SCAN

Snickarvägen 5, 132 38 Saltsjo-Boo, Stockholm

Sweden

maqab.com harald@maqab.com

ENERGY SAVING CUTTING TOOLS Consolidated sales

The need

By reducing the vibrations in a metal cutting process significant energy savings can be made. The machine con complete its work in a shorter time and in many cases a secondary operation can be avoided thanks to the superior surface finish achieved.

The solution

MAQ’s innovative technology simplifies machining by eliminating costly vibration. Offering a high level of reliability and using standard clamping, it is a self-adjustable, low cost plug and play solution that removes vibrations in a wide frequency range.

Value proposition

• Energy saving cutting tools. • Increased productivity and less machine time. • Extended lifetime of insert by x10. • No need for tuning. • Reduce scrap metal. • Reduced operating expenses.

Customer references Available on request.

141

InnoEnergy | TBB 2026 MARKET

TRANSPORT & MOBILITY

PRODUCT

ZBOX

Navlandis BOOTH #

D29 CLICK OR SCAN

Carrer Oriola 32, 46210 Valencia

Spain

navlandis.com/en mnavalon@navlandis.com

FOLDABLE SHIPPING CONTAINERS THAT REDUCE TRANSPORTATION COSTS AND CUT CO2 EMISSIONS

Starting sales

The need

Innovation is required in the logistics sector as a means to reduce both operational costs and environmental impact, proving that sustainability and profitability go hand in hand.

The solution

Zbox are ingenious foldable shipping containers that, when travelling empty, occupy 80% less space than traditional containers. This translates into significantly reduced transportation costs,

with CO2 emissions simultaneously slashed. When travelling unfolded and full, these lightweight containers behave to the same standard as any traditional container.

Value proposition

• Five containers can be shipped in the same space as one traditional one. • A 50% reduction in operational costs.

142

• Easy to fold and lighter in weight than standard containers. • Lower production costs. • Reduced CO2 emissions.

Customer references

Several routes with Marguisa Shipping Lines, the leading international container and project cargo line in Spain. A new route to transport plant-based oils from Northern Europe to South America, inside flexitanks for AAK Denmark A/S was launched in 2023.

Energy consumption MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

INDUSTRY

PRODUCT

SUNIFIX

NitroCapt BOOTH #

D30 CLICK OR SCAN

Almas allé 3B, 756 51 Uppsala, Uppsala län

Sweden

nitrocapt.com gustaf.forsberg@nitrocapt.com

LOW CARBON NITROGEN FERTILISERS

Early stage

The need

Key nitrogen compounds for industry are currently produced through the Haber Bosch process. This process requires a lot of energy from fossil raw materials and it is responsible for approximately 2% of global greenhouse gas emissions.

The solution

Sunifix is a fossil-free and energy efficient technology for the fixation of nitrogen from the air

for industrial and agricultural purposes. The process can operate from intermittent renewable energy sources. It is applicable on a large as well as on a small distributed production scale.

Value proposition

• The process offers the production of key nitrogen compounds with modest process investments and at an attractive energy cost.

• Responds to societal needs to cope with climate change by offering an emission-free process with only air as raw material.

Customer references

Strategic partnership with the Swedish agricultural cooperative Lantmännen.

143

InnoEnergy | TBB 2026 MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

BIOENERGY & WASTE TO ENERGY

PRODUCT

NORDIC SEAFARM

Nordic SeaFarm BOOTH #

D31

CLICK OR SCAN

Masthamnsgatan 3, 41329 Gothenburg

Sweden

nordicseafarm.com christer@nordicseafarm.com

OCEAN-GROWN SEAWEED AT SCALE TO DECARBONISE SUPPLY CHAINS

Starting sales

The need

EU emissions need to be cut by at least 55% by 2030 and supply chains decarbonised. Europe’s oceans are underutilised in producing raw materials for bioplastics, energy and food. Seaweed is a regenerative biomass with an ultra-low climate footprint that can play a vital role in this transformation.

The solution

biomass (seaweed) on massive scale in the ocean. Seaweed is a functional crop with an ultra-low climate footprint. It has the potential to play a vital role in decarbonising industries and transforming future applications. It contains structural fibres and nutrition, and can help substitute fossil-based raw materials in future material applications, e.g. bioplastics, coatings and packaging solutions.

Seaweed is processed into valuable sub-products such as: • Materials: Granulates and formulations to be used within packaging, and bioplastic. • Food: Sustainable ingredient to add nutrition and taste. • Plant care: Organic source of nitrogen and phosphorous used in regenerative farming practices and enhance plant yield.

Customer references

Through proprietary R&D, Nordic SeaFarm has unlocked the ability to grow sustainable

Leroy Seafood Group.

144

Value proposition

Energy consumption MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

INDUSTRY

PRODUCT

HIGH-CAPACITY DRONE-BASED SPREADING SYSTEM

Nordluft Automation BOOTH #

D32 CLICK OR SCAN

Karlbergs strand 4B, 17173 Solna, Stockholm

Sweden

nordluft.se elof.winroth@nordluft.se

EFFICIENT AND HIGH-PRECISION SPREADING FOR FORESTRY AND AGRICULTURE

Pilot

The need

Forest fertilisation and bio ash recirculation are significantly limited by current spreading methods, e.g. tractors and helicopters. With Nordluft’s technology, these measures become accessible for more forest owners as they contribute to increased productivity and carbon sequestration.

The solution

Nordluft’s system is an alternative technology that offers cost-efficient and flexible

high-precision spreading. A swarm of collaborating heavy lift electric multicopters backed by smart software and a vehicle base station unite for a smooth, efficient and fully-integrated logistical solution.

Value proposition

• Low-cost, resource efficient and highly flexible aerial spreading of material with a range of applications. • Lower CO2 emissions compared to current spreading methods.

• High-precision, cost-efficient spreading where applicable.

Customer references

A range of high-profile nordic forestry and bio energy companies have shown interest in the forest fertilisation and ash recirculation applications. Södra Skogsägarna is an investor since 2024 and Nordluft has secured a strategic partnership with SCA, Holmen and Kopparfors.

145

InnoEnergy | TBB 2026 MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

RENEWABLE GAS & BIOFUELS

PRODUCT

MODULAR CO₂ CAPTURE AND PURIFICATION SYSTEM

Orchestra Scientific BOOTH #

D33 CLICK OR SCAN

Avenida Països Catalans 16, 43007 Tarragona

Spain

orchestrasci.com csaenzpipaon@orchestrasci.com

CAPTURE CO₂. PURIFY IT. REUSE IT. SELL IT.

Starting sales

The need

Industries emit CO₂ while many sectors need high-quality CO₂ for their processes. However, current capture solutions are often expensive, energy-intensive, toxic, or only viable at very large scale. Small and medium emitters are left without a practical solution.

The solution

Orchestra Scientific provides a modular CO₂ capture and purification system based on a patented, highly selective and non-toxic adsorbent material.

Our technology captures CO₂ directly from industrial gas streams under mild operating conditions, without amines or toxic solvents, and delivers high-purity CO₂ ready for reuse or commercialisation.

Value proposition

Orchestra Scientific helps industries reduce emissions, secure CO₂ supply and create value from a waste stream.

Customer references Available on request.

Key advantages: • CO₂ purity up to 99.9% • Target OPEX below 40 €/t CO₂

146

• Modular and scalable system • Suitable for small and medium-scale emitters • Low-pressure, moderate-temperature operation • Non-toxic, amine-free process • Captured CO₂ can be reused on-site or sold.

Energy consumption MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

INDUSTRY

PRODUCT

FOCUSED MICROWAVE POWER

Percyroc BOOTH #

D34 CLICK OR SCAN

Green Innovation Park, Ulls väg 29C, 756 51 Uppsala

Sweden

percyroc.se dragos@percyroc.com

SMARTLY FOCUSED MICROWAVE POWER FOR MATERIAL PROCESSING

Pilot

The need

A solution is required to make the microwave-based technology transition from Industry 3.0 to Industry 4.0, driven by intelligent and adaptive systems and integrating hardware, software and data.

The solution

A high power transistor-based microwave material processing technology platform, driven by

machine learning algorithms. Applications can be found in the extractive, processing and mining industries.

Value proposition

• Facilitates Industry 4.0 transition/adoption in industrial microwave material processing applications. • Future-proof industrial equipment during technology transition.

• Intelligent and adaptive hardware, software and data offering for industrial microwave material processing applications.

Customer references Available on request.

147

InnoEnergy | TBB 2026 MARKET

RESIDENTIAL BUILDINGS

PRODUCT

PIONIERKRAFTWERK 3.0

Pionierkraft BOOTH #

D35 CLICK OR SCAN

Osterwaldstraße 10-D13, 80805 Munich

Germany

pionierkraft.de

FULL SERVICE, HARDWAREBASED PHOTOVOLTAIC ENERGY SHARING FOR MULTI-FAMILY HOUSES

management@pionierkraft.de

Starting sales

The need

More people want access to affordable clean energy. However, complicated administrative rules and regulations for self-consumption in multi-apartment buildings hinder the implementation of rooftop PV systems. This keeps the uptake of PV-generated energy aimed at onsite consumption artificially low.

The solution

Pionierkraft enables people to share self-generated renewable energy. The neat energy-sharing unit acts within and between multi-family homes and in smaller apartment buildings in an economical and operator-friendly manner. This fills a gap for economical PV solutions in smaller residential buildings. With its hardware and servicemodel, battery storage can be

used collaboratively and tenant power projects can be implemented economically.

Value proposition

• Increases the proportion of energy consumed and produced locally. • More people gain access to affordable clean energy. • Full service and hardware-based.

Customer references Available on request.

148

Energy consumption MARKET

NON-RESIDENTIAL BUILDING

PRODUCT

QIEN

Qien BOOTH #

D36 CLICK OR SCAN

Jan Tinbergenstraat 396, 7559 ST Hengelo

The Netherlands

qien-online.com/eng info@qien-online.com

MAKES EXISTING BUILDING MANAGEMENT SYSTEMS SMARTER WITH AI

Consolidated sales

The need

Current building energy management systems (BEMS) have room for improvement. The cost to install, maintain and utilise them is too high, and there should be smart building technologies in place to ensure that energy is being used efficiently in the entire building.

The solution

The Cloud Energy Optimizer (CEO) is a cloud-based AI-driven add-on to existing building energy management systems

(BEMS). Based on the weather forecast, it accurately predicts the energy needs of the building (by zone). This allows for energy savings of 10% to 50% plus other cost reductions, and increases indoor comfort. Simple to install, the system is fully compatible with existing buildings.

Value proposition

• Contributes to sustainability goals. • Enhances indoor comfort. • Extends the lifespan of technical installations.

• Instant and significant energy and cost reductions by 10% to 40%. • Use of the most sustainable and/or cheapest energy available. • No adaptations required for heating, ventilation and air conditioning (HVAC) system or building.

Customer references

City Counsel Groesbeek, Provincial house Overijssel, Zwolle, Wehkamp, Zwolle.

149

InnoEnergy | TBB 2026 MARKET

TRANSPORT & MOBILITY

PRODUCT

ROUTAL

Routal BOOTH #

D37 CLICK OR SCAN

Badajoz 32, 08005 Barcelona

Spain

routal.com xavier.ruiz@routal.com

MOVE THE WORLD SMARTER Consolidated sales

The need

Last mile operations are crucial for logistics, distribution, maintenance, energy and transport. Efficient planning cuts costs, enhances service and boosts profits. Tech is vital in effective, risk-free operations, optimising service quality. However, most companies still manage operations manually.

The solution

Routal optimises last mile ops for companies. It streamlines route planning, real-time operations management and driver monitoring, cutting planning time and risk by 90%. The service notifies customers of arrival time, boosting service and reducing failed visits by over 50%. An easy-to-use interface

achieves efficiency, service improvement and detailed monitoring. A last mile delivery can be up and running in under 24 hours.

Value proposition

• User-friendly platform (production in 24h). • Standardisation of last-mile processes (logistics, maintenance, sales, etc.). • Reduction of 90% of planning time. • Reduced operational costs by over 30%. • Improved service quality and enhanced customer perception. • Customisable to any kind of company (logistics, utility, maintenance, etc.).

150

Customer references Field maintenance:

• Customers: Prio Energy, Suez, Agbar, Aigües de Barcelona, Global Omnium, Ienova. • Savings over 20% efficiency increment. • Benefits improved service, reduced management time and process standarization. Industrial distribution: • Clients: Volkswagen, Autosolar, Daimler • Savings: Over 25% cost reduction on last-mile distribution Benefits: • Performance improvement, total control of the supply chain, service improved with more customer retention.

Energy consumption MARKET

TRANSPORT & MOBILITY

PRODUCT

SCOOBIC HI-CARGO

Scoobic BOOTH #

D38 CLICK OR SCAN

Carretera De La Isla 5, 41703 Dos Hermanas, Seville

Spain

scoobic.com sergio.gonzalez@scoobic.com

THE ULTIMATE WAY TO DELIVER GOODS IN URBAN CENTRES, SOLVING LAST MILE PROBLEMS

Starting sales

The need

The last-mile delivery sector needs a new category of vehicles that are electric, able to reduce CO2 emissions, fast and agile in traffic in an urban environment, easy to park with access to pedestrian areas, but also offering as large a loading capacity as possible.

The solution

Scoobic’s vehicles are a new category of fully-electric vehicles with a range of autonomy of up to 100km and beyond in some of its upcoming models, which will also include an innovative removable battery system.

Three-wheeled vehicles have the same loading capacity as vans (up to 750kg. / 1.400 litres).

Value proposition

• A new category of vehicle. • Ability to transport as high a volume and payload as possible (up to 750kg / 1.400 litres). • Three-wheelers make for safer driving than a motorcycle, while maintaining agility in traffic. • Can access the city centre with ease and find parking space. • Can access pedestrian areas legally.

Customer references

MISSION BOX - MOX = 5 vehicles SCOOBIC LIGHT in renting (36 month) Jan-2020 in Spain (Madrid, Zaragoza); FIRST STOP = 2 vehicles SCOOBIC LIGHT in renting (36 month) Jan-2020 in Spain (Madrid); LA POSTE = 12 SCOOBIC LIGHT in renting (6 month) Oct-2020 Rennes & Nantes; CORREOS: 6 SCOOBIC LIGHT, VECTALIA: 4 SCOOBIC LIGHT delivered Oct-2020 Pamplona, Alicante, Murcia, Teruel; LOGISTICS HOLLAND = 1 SCOOBIC MINI sold Nov-2019 NL. GAS2MOVE = 5 vehicles SCOOBIC LIGHT sold March-2020 Spain; AMAZON Italy = 8 SCOOBIC LIGHT in renting (3 months) delivered in Nov-2020 Italy.

151

InnoEnergy | TBB 2026 MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

INDUSTRY

PRODUCT

FORS & STRÖM

Stockholm Water Tech. BOOTH #

D39 CLICK OR SCAN

Stockholmsvägen 116B, 187 30 Täby, Stockholm

Sweden

stockholmwater.com info@stockholmwater.com

SMART, SUSTAINABLE AND CUSTOMISED WATER SOLUTIONS

Consolidated sales

The need

Water is vital for consumer and industry. Without water, there is no social or economic development. Through its patented CAP3D solution, tailored to meet the evolving industry and consumer water needs, SWT is re-thinking water treatment and transforming it into a smart and sustainable industry.

The solution

SWT’s patented water treatment solutions are based on electro-capacitive technology

(CAP3D) and have a membrane free and low chemical use product architecture. SWT’s CAP3D removes a wide array of contaminants, is highly modular and scalable, and can be tailored to meet customer needs (water quality) in industrial, municipal and consumer applications.

Value proposition

• Recovery and reuse of resources from water and wastewater. • Chemical free and highly adaptable and smart water treatment solution.

152

• Tailorable water quality - for application specific use. • Enables fully circular water treatment solutions with potential creation of additional and/or increased revenue sources. • Combined hardware and software solution with big data and IoT facilitated water treatment.

Customer references • DRC Chemtec • AmpliAqua • VEOLIA

Energy consumption MARKET

TRANSPORT & MOBILITY

PRODUCT

SWOBBEE

Swobbee BOOTH #

D40 CLICK OR SCAN

Johann-Hittorf-Straße 8, 12489 Berlin

Germany

swobbee.de/en t.duscha@swobbee.com

BATTERY CHARGING & SWAPPING INFRASTRUCTURE FOR MICROMOBILITY & DRONES

Consolidated sales

The need

Operators of light electric vehicle fleets need a secure charging infrastructure. Fully charged batteries should be available all times throughout the fleet’s operational area. Batteries are an expensive asset with high investment costs. Battery populations must be monitored and managed very well.

The solution

Swobbee offers an infrastructure of decentralised battery swapping stations with 24/7 battery monitoring and safe

and gentle charging. Swapping the battery only takes a few seconds. Swobbee offers two business models: with Batteryas-a-Service, Swobbee offers fleet operators the opportunity to cap the high investment costs and distribute them as operating costs; with Chargingas-a-Service, Swobbee offers sharing fleets a central charging solution for swapping operations.

Value proposition

• A decentralised, safe charging solution from a single source.

• A software dashboard and app provides the possibility of managing large battery populations with batteries from different manufacturers and designs. • The BaaS approach offers relief for initial investments in batteries.

Customer references

Tier mobility, 2021, Berlin, Germany, 8 stations in CaaS contract; Onomotion, 2021, Berlin, Germany, 100 batteries in BaaS contract; Avocargo, 2022, Berlin, Germany, 100 batteries in BaaS contract. Voi Germany, 2023: 18 stations.

153

InnoEnergy | TBB 2026 MARKET

DECARBONISING THE INDUSTRY

SUB MARKET

INDUSTRY

PRODUCT

TRIBOCONDITIONING®

Tribonex AB BOOTH #

D41 CLICK OR SCAN

Knivstagatan 12, 75323 Uppsala

Sweden

tribonex.com

COST-EFFICIENT AND SCALABLE SURFACE TREATMENTS FOR MINIMISED FRICTION AND WEAR IN VARIOUS INDUSTRIAL APPLICATIONS

sales@tribonex.com

Starting sales

The need

More than 20% of all energy used globally is lost due to friction and wear in various applications, including vehicle transmissions, bearings, pumps, compressors etc. Friction results in energy losses, while wear limits the lifespan of vehicles, machines and equipment which then need replacing.

production machines, allowing for scalability and seamless integration in existing production lines. The process can replace current polishing steps, adding performance at low cost. The treatment can be applied on components made of steel or cast iron and of various shape and size, thus having very broad applicability.

Value proposition

The solution

A patented mechano-chemical process creates durable low friction surfaces on components. The process is flexible and cost-efficient as it can be implemented using standard

• Surface treatments have a direct impact on the performance of customers’ products through the reduction of friction and wear.

154

• Energy consumption is lowered, operational and maintenance costs reduced and machine and system lives extended. • Friction can be reduced by 50% and wear by 80% compared to current finishing processes, levels only achievable today using advanced and expensive coatings such as DLC. This can be done at a fraction of the cost and with much lower operational complexity.

Customer references

• Leading Automotive Car OEM • Leading Aerospace customer

Energy consumption MARKET

RESIDENTIAL BUILDINGS

SUB MARKET

HEATING AND COOLING

PRODUCT

VERV ENERGY

Verv BOOTH #

D42 CLICK OR SCAN

Sustainable Workspaces, County Hall, Belvedere Road, SE1 7PB London

United Kingdom verv.energy

sales@verv.energy

AI-DRIVEN CLIMATE SOLUTIONS Starting sales

The need

There is an urgent need to address heating, ventilation and air conditioning (HVAC) energy inefficiencies with more accurate monitoring and predictive maintenance. Businesses are looking to enhance their performance, meet sustainability targets and reduce costs.

The solution

Verv employs pioneering energy technology to transform HVAC system management. With sustainability in focus, Verv empowers businesses to

optimise their energy usage, reduce waste and enhance HVAC performance. Real-time monitoring, predictive maintenance and tailored insights enable businesses to make informed decisions that help boost operational efficiency, deliver cost savings and meet sustainability targets.

Value proposition

• Real-time monitoring of HVAC systems. • Predictive maintenance capabilities.

• Data-driven insights tailored for HVAC efficiency. • Identification of inefficiencies and waste reduction. • Enhanced performance of HVAC systems. • Cost savings through energy optimisation. • Board level energy reporting. • Contribution to sustainability goals and environmental stewardship.

Customer references Mitsubishi Electric.

NHS Manchester University.

155

InnoEnergy | TBB 2026 MARKET

TRANSPORT & MOBILITY

PRODUCT

WAYBLER

Waybler BOOTH #

D43 CLICK OR SCAN

Svetsarvägen 8, 17141 Solna

Sweden

waybler.com kurt@waybler.com

SHARED CHARGING. MADE SIMPLE.

Consolidated sales

The need

There is a need to develop a mass market for EVs by providing a cost-efficient charging solution that is profitable for both real estate and parking lot owners.

The solution

Waybler has developed a complete system based on a unique business model that enables clients to charge electric vehicles in parking lots located

at home or at work. The solution includes an AI cloud charging service, a mobile app and a charging box, and uses the entire time that a vehicle is parked to efficiently distribute power between cars. As a result, many cars can be charged without expensive load peaks.

Value proposition

• Efficient: cars are charged efficiently based on user needs and available electrical power capacity.

156

• Profitable: a unique business model that makes the initial investment required low, and enables energy costs to be cut. • Scalable: new stations can be easily added. Simple: cars are charged wherever they are parked, at home or at work.

Customer references

Fabege AB, Newsec, Platzer, Bonava.

Energy consumption MARKET

TRANSPORT & MOBILITY

PRODUCT

ZPARQ

ZPARQ BOOTH #

D44 CLICK OR SCAN

Östra Finnbodavägen 21, 13173 Nacka Stockholm

Sweden zparq.se

jonas@zparq.se

MAKING MARINE PROPULSION SUSTAINABLE

Starting sales

The need

New and improved electric drivetrain technology for propeller-driven watercraft must also meet the growing demand for fossil-free marine transportation. Currently, no submerged electric motor system on the market can combine cost effectiveness with high power and high efficiency.

The solution

Zparq vastly improves marine electric propulsion with a compact and scalable

direct-drive system for propeller-driven watercraft. The technology, which overcomes the fundamental limitations of current market offerings, is based on a novel motor design that specifically adapts to submersible applications. A patented passive cooling system enables the motor to be up to 10 times smaller in volume than motors of equal power.

Value proposition

• Small volume – minimal underwater drag.

• Few parts - low production cost and fewer failure points. • High efficiency - longer range. • Submerged - low noise and compact.

Customer references Strategic partnerships:

• CPAC-Volvo Penta • Swedish sea rescue society • SSPA (now RISE) • Micropower Group • Aston Harald • KTH

157

InnoEnergy | TBB 2026

SUCCESS STORIES

THE CLEAN TECHNOLOGY ERA Clean tech innovations have boomed over the past decade and a half. Today, these technologies integrate with the existing energy industry, gradually transitioning it to become sustainable. No longer a niche play or a costly green premium, these innovations are becoming integral to the new energy system, reshaping entire industries and emerging as the economically rational choice. Learn more about some of our portfolio companies’ successes on the following pages.

158

ecop.at/en/home-4

BREAKING GROUND ON INDUSTRIAL HEAT PUMPS FROM FIRST-OF-A-KIND TECHNOLOGY TO SERIES PRODUCTION ecop is moving its Rotation Heat Pump from breakthrough technology towards industrial deployment. In the latest ROTOR project at KSB’s foundry in Pegnitz, Germany, ecop’s new-generation heat pump is being integrated into an existing industrial heating system for the first time, upgrading previously unused foundry waste heat and supplying it to the site’s heating network; the project is expected to decarbonise more than 1.5 GWh of heat annually and provide a reference model for other industrial sites. The milestone comes as ecop moves towards series production. Its latest rotor design can deliver industrial heat at up to 200°C, while the company’s GRIP project is establishing what ecop describes as the world’s first dedicated serial-production facility for its Rotation Heat Pump, with capacity for 100 units a year. The project received up to €13.2 million from the EU Innovation Fund in April 2026 and is expected to avoid more than 2.5 million tonnes of CO₂e over ten years. That scale-up is backed by industry: in 2025, KSB invested several million euros for an almost 20% stake in ecop, alongside a €10.5 million financing round. As CEO Fabian Sacharowitz put it, the partnership will enable ecop to “transfer our Rotation Heat Pump to series production, expand our technology worldwide” and move into higher-performance ranges of large heat pumps.

News & developments → Boost for cutting-edge production facility from the European Innovation Fund → A major milestone for ecop: first industrial project with the new generation Rotation Heat Pump 159

InnoEnergy | TBB 2026

tokwise.com

TURNING RENEWABLE PORTFOLIOS INTO INTELLIGENT TRADING OPERATIONS 2 GW, 9 COUNTRIES, 42% GROWTH, AND EXPANDING TokWise is tackling a growing problem in Europe’s renewable energy market: as wind and solar volumes increase and electricity markets become more volatile, the value of an asset increasingly depends on how well it is forecast, traded and optimised—not simply how much power it produces. Its AI-powered platform brings forecasting, portfolio optimisation and trading together, helping energy companies reduce imbalance costs and respond faster to changing market conditions; TokWise now manages 2 GW across 9 countries, with revenue growth of 42%. The company is now applying the same portfolio logic to battery storage. Its GuardianTrade platform integrates batteries into wider renewable portfolios rather than treating them as standalone assets, with optimisation running across day-ahead, intraday and balancing markets. In 2025, TokWise also partnered with Trading Technologies to add high-speed order routing to European exchanges including EPEX and Nord Pool—a move that reflects how increasingly fast electricity markets are becoming. The shift is about keeping control as energy markets become more complex. “For any system dealing with intraday spot power, speed is everything,” says TokWise Managing Partner Krasimir Kolev, explaining the company’s partnership with Trading Technologies.

Information & background → Maximize margin per MWh with AI-decision-making → Empower every energy market player to take faster and better decisions

160

koremetals.com

BUILDING EUROPE’S STRATEGIC METALS SUPPLY CHAIN SCALING SILICON PRODUCTION AS THE FIRST STEP TOWARDS A BROADER METALS PLATFORM Kore Metals is building a European strategic metals platform, starting with silicon. The company has secured up to €14.5 million through the European Innovation Council’s Accelerator and the Horizon Europe-funded WISER project to advance its electricity-driven, modular production technology, designed to strengthen Europe’s domestic supply of critical materials while reducing reliance on carbon-intensive processes. Silicon is the first application of the model, with material already shipped to eight customers across the semiconductor, chemicals and aluminium value chains for qualification, and more in the pipeline. Kore Metals is advancing a pilot production cell targeting around 1,000 tonnes of silicon per year, moving its technology towards industrial validation and commercial deployment. At the same time, its work through WISER is expanding the company’s capabilities to recover and produce high-purity materials from secondary resources, including end-of-life solar panels and industrial residues. The ambition extends beyond silicon to a broader portfolio of strategic metals, using the same modular approach to develop new European supply sources. “Achieving both programs is a testament to our technology, team, and the role we play in strengthening Europe’s strategic metals supply chain,” says CEO and co-founder Joost Van Oorschot.

News & developments → Kore Metals secures support through European programs worth up to €14.5 million as it advances toward industrial silicon production → EU launches €8 million project to strengthen Europe’s supply of critical semiconductor raw materials 161

InnoEnergy | TBB 2026

skeletontech.com

FROM BREAKTHROUGH STORAGE TO INDUSTRIAL SCALE 580 MWH OF ANNUAL CAPACITY AS SKELETON PREPARES FOR ITS NEXT PHASE OF GROWTH Skeleton Technologies is moving its SuperBattery from pilot production towards industrial scale, targeting 10 million cells a year and 580 MWh of annual capacity by 2029 at its Varkaus facility in Finland. The technology combines supercapacitor and battery characteristics to deliver high power, fast charging and long cycle life, targeting applications such as high-frequency grid balancing where rapid response is increasingly important as renewable generation grows. At the same time, Skeleton is expanding beyond Europe as demand grows for high-power systems in both energy infrastructure and AI data centres. The company is establishing U.S. manufacturing and engineering capabilities, with more than 100 MW of systems already deployed in the country and around half of its revenue coming from North American customers. Its U.S. expansion is part of a broader strategy to position its technology closer to major AI and energy markets. That international scale-up is now feeding into Skeleton’s next corporate phase: the company is preparing for a planned U.S. IPO in 2027, alongside the expansion of its production and customer base. “The U.S. is our fastest-growing market by far,” says CEO and co-founder Taavi Madiberk. Together, the Varkaus scale-up, U.S. expansion and planned public listing mark Skeleton’s transition from European deep-tech scale-up to a global power-technology company.

News & developments → Skeleton Technologies announces first close of pre-IPO funding round with initial €33 million investment → SB-VARKAUS: SuperBattery production for high-frequency grid balancing → Skeleton Technologies accelerates U.S. expansion to address AI-driven grid strain 162

enline.energy

UNLOCKING MORE CAPACITY FROM EUROPE’S EXISTING GRIDS DIGITAL TWINS HELP UTILITIES INTEGRATE MORE RENEWABLES WITHOUT WAITING FOR NEW INFRASTRUCTURE Enline uses AI and physics-based digital twins to help grid operators model and optimise infrastructure in real time. Its GridSight platform combines grid data with weather and other inputs to identify available capacity and manage increasingly complex power flows. The company now has more than 10,000 km of grid under management and 80+ enterprise clients worldwide. A recent deployment with Lithuania’s transmission operator Litgrid demonstrates the potential. Enline and Energiot are deploying Dynamic Line Rating across 38 overhead lines covering around 1,170 km, with pilots indicating an average 50% increase in available capacity above static design ratings. By recalculating line capacity every 15 minutes based on real-time conditions, the technology can unlock more capacity from infrastructure already in place. Enline is now expanding its digital-twin platform across transmission and distribution, while ABB Electrification Ventures has invested in the company to support the next stage of growth. The progress highlights a broader shift in grid investment: alongside building new infrastructure, digital intelligence can help Europe get more capacity and flexibility from the networks it already has.

News & developments → Enline and Energiot awarded dynamic line rating contract by Litgrid → ABB invests in Enline to advance AI-powered digital twin technology for unlocking grid capacity

163

InnoEnergy | TBB 2026

verkor.com

FROM INNOVATION TO INDUSTRIAL-SCALE BATTERY PRODUCTION 16 GWH OF ANNUAL CAPACITY FOR A STRATEGIC EUROPEAN BATTERY INDUSTRY Verkor is turning battery innovation into industrial production. Its Dunkirk gigafactory, inaugurated in December 2025, is now moving through its industrial ramp-up, with the second production line commissioned and the first batteries produced entirely on-site delivered in 2026. The plant is targeting 16 GWh of annual capacity and 1,200 jobs, with Verkor aiming to reach 50 GWh after 2030. The Dunkirk gigafactory is part of France’s strategic industrial push, with Verkor describing it as a strategic site and highlighting support from the French government’s France 2030 plan. The project is also positioned as a contribution to European industrial autonomy and the development of a sovereign and sustainable European battery industry. The factory brings technologies developed at Verkor’s Grenoble Innovation Centre into highvolume manufacturing. “This project embodies Europe’s energy transition and the industrialization in France and Europe of the key technologies that make it possible,” said former CEO Benoit Lemaignan. The milestone marks Verkor’s shift from developing battery technology to manufacturing it at industrial scale.

News & developments → From Grenoble to Dunkirk: Verkor advances its Gigafactory ramp-up with Hanwha Momentum as a trusted industrial partner → Projects supported by Europe: AGATHE Project → Verkor reaches a decisive milestone and opens its first gigafactory 164

equinoxoceanturbines.com

FROM OPEN-WATER VALIDATION TO COMMERCIAL-SCALE OCEAN POWER TRL 6 ACHIEVED AS EQOT MOVES TOWARDS A 2 MW TURBINE Equinox Ocean Turbines (EQOT) has moved its Mobula® technology from controlled testing into real-world operation, successfully completing open-water testing of its 1:10-scale Mobula® 5 prototype. The campaign demonstrated controlled diving and surfacing, operation of the rotor, drivetrain, and power take-off as an integrated system, and electricity generation in open water, advancing the technology to TRL 6. The milestone moves ocean-current energy closer to commercial deployment. EQOT is now progressing the Mobula® 25 minimum viable product, targeted for deployment in 2028, while preparing its full-scale Mobula® 50, a planned 2 MW turbine targeted for 2030. The company is also developing commercial opportunities in regions with strong ocean currents, including the United States, Japan, and South Africa. Unlike wind and solar, ocean currents can provide predictable, continuous power. EQOT estimates more than 700 GW of global ocean-current potential, positioning its technology as a potential source of reliable renewable generation alongside more variable clean-energy sources. The latest testing is an important step in turning that resource into a scalable energy technology.

News & developments → Equinox Ocean Turbines reaches TRL 6 following successful open-water testing of Mobula® 5 → Equinox Ocean Turbines launches open-water testing to unlock the 700 GW global ocean current market 165

InnoEnergy | TBB 2026

ALPHABETICAL INDEX OF COMPANIES

AC Biode.......................................115 ACT Blade Limited..................... 44 AEInnova.......................................116 ALPINOVX.....................................117 Altris............................................... 88 AQUABATTERY............................. 89 Athena........................................... 45

Bamboo Energy........................... 80 Basquevolt................................... 90 BeePlanet Factory....................... 91 Beholder.......................................118 Betterspace Group.....................119 Bin-e.............................................120 BM2Solar Energy......................... 92

Candam Tech...............................121 Catalyco.......................................122 C-Green......................................... 46 &Charge GmbH............................114 Charge2Change........................... 93 Clevergy........................................123 COAT-IT........................................124 CorPower Ocean..........................47

DC Brain.......................................125 Descarbonize..............................126

166

EasySolar AI................................. 48 EcoBean....................................... 127 ecoligo........................................... 49 ecop Technologies GmbH.......128 Elaphe..........................................129 Elestor........................................... 94 ElevenEs....................................... 95 Empyrio......................................... 50 ENEIDA.IO...................................... 81 Energiot ....................................... 82 Energy Floors (SDC)..................130 Enline............................................. 83 Enosis............................................. 51 Equinox......................................... 52

Feedgy........................................... 53 FertigHy......................................... 54 Fibersail......................................... 53 FineCell.........................................131 FlexiDAO......................................132 FUTURE VOLTAICS...................... 56

GDI.................................................. 96 Geolinks Services......................132 Gradis...........................................134 Graphmatech................................97 GravitHy.......................................135

Heat Power..................................136 Heat Ventors................................ 98 Heliup.............................................57 Hepta Insights............................. 84 HoloSolis....................................... 58 HSL Technologies....................... 59 Hysun............................................. 60

Incitis............................................ 137

Jolt Electrodes...........................138

KERIONICS....................................61 Kore Metals.................................139

LignEasy.......................................140

MAQ AB.........................................141 Mecaware.....................................99 MEVA Energy................................ 62 Midstrom...................................... 63 Mine Storage.............................. 100 Minesto AB................................... 64 Mpower Ventures AG................. 85

Navlandis.....................................142 Nesetten....................................... 65 Nexwafe GmbH........................... 66 Nines PV.........................................67 NitroCapt.....................................143 Nordic SeaFarm.........................144 Nordluft Automation................145 Novatron Fusion Group AB...... 68

Orchestra Scientific..................146

Percyroc....................................... 147 Phytonics GmbH......................... 69 Pionierkraft..................................148 Prime Battery Technologies.....101 Principle Power........................... 70 Pure Battery Technologies......102

Qien...............................................149 Qkera............................................103

Rivus Batteries...........................104 ROSI............................................... 72 Routal...........................................150

Scoobic.........................................151 SeaQurrent................................... 73 Silbat.............................................105 Skeleton.......................................104 Steadysun...................................... 71 Stockholm Water Tech............152 Suena............................................107 SUNWAFE......................................74 Swobbee......................................153

TaiSan...........................................108 TFI Marine Limited..................... 75 the Batteries...............................109 TokWise......................................... 86 Tribonex AB.................................154

Verkor............................................110 Verv...............................................155 VolagHy......................................... 76 volytica diagnostics................... 111

Waybler........................................156

X1 Wind...........................................77

ZPARQ........................................... 157

167

InnoEnergy | TBB 2026

INDEX OF COMPANIES BY COUNTRY

AUSTRALIA

Pure Battery Technologies......102

AUSTRIA

ecop Technologies GmbH.......128

BULGARIA

TokWise......................................... 86

ESTONIA

Beholder.......................................118 Hepta Insights............................. 84 Skeleton.......................................106

FINLAND

LignEasy.......................................140 VolagHy......................................... 76

FRANCE

ALPINOVX.....................................117 Athena........................................... 45 DC Brain.......................................125 Enosis............................................. 51 Feedgy........................................... 53 Geolinks Services......................133 GravitHy.......................................135 Heliup.............................................57 HoloSolis....................................... 58 HSL Technologies....................... 59 Incitis............................................ 137 Mecaware..................................... 99 ROSI............................................... 72 Steadysun...................................... 71 Verkor............................................110

168

GERMANY

&Charge GmbH............................114 Betterspace Group.....................119 ecoligo........................................... 49 Nesetten....................................... 65 Nexwafe GmbH........................... 66 Phytonics GmbH......................... 69 Pionierkraft..................................148 Qkera............................................103 Suena............................................107 Swobbee......................................153 volytica diagnostics................... 111

HUNGARY

Heat Ventors................................ 98

IRELAND

Nines PV.........................................67 TFI Marine Limited..................... 75

LATVIA

Catalyco.......................................122 Empyrio......................................... 50

LUXEMBOURG

AC Biode.......................................115 Kore Metals.................................139

THE NETHERLANDS

AQUABATTERY............................. 89 Elestor........................................... 94 Energy Floors (SDC)..................130 Equinox......................................... 52 Fibersail......................................... 55 GDI.................................................. 96 Heat Power..................................136 Qien...............................................149 SeaQurrent................................... 73

POLAND

Bin-e.............................................120 COAT-IT........................................124 EasySolar AI................................. 48 EcoBean....................................... 127 Gradis...........................................134 the Batteries...............................109

PORTUGAL

BM2Solar Energy......................... 92 Charge2Change........................... 93 ENEIDA.IO......................................81 Enline............................................. 83

ROMANIA

Prime Battery Technologies.... 101

SERBIA

ElevenEs....................................... 95

SLOVENIA

Elaphe..........................................129

SPAIN

AEInnova.......................................116 Bamboo Energy........................... 80 Basquevolt................................... 90 BeePlanet Factory....................... 91 Candam Tech...............................121 Clevergy........................................123 Descarbonize..............................126 Energiot ....................................... 82 FertigHy......................................... 54 FlexiDAO......................................132 FUTURE VOLTAICS...................... 56 Hysun............................................. 60 Jolt Electrodes...........................138 KERIONICS.................................... 61 Navlandis.....................................142 Orchestra Scientific..................146 Routal...........................................150 Scoobic.........................................151 Silbat.............................................105 SUNWAFE......................................74 X1 Wind...........................................77

SWEDEN

Altris............................................... 88 C-Green......................................... 46 CorPower Ocean..........................47 FineCell.........................................131 Graphmatech................................97 MAQ AB.........................................141 MEVA Energy................................ 62 Midstrom...................................... 63 Mine Storage...............................100 Minesto AB................................... 64 NitroCapt.....................................143 Nordic SeaFarm.........................144 Nordluft Automation................145 Novatron Fusion Group AB...... 68 Percyroc....................................... 147 Rivus Batteries...........................104 Stockholm Water Tech............152 Tribonex AB.................................154 Waybler........................................156 ZPARQ........................................... 157

SWITZERLAND

Mpower Ventures AG................. 85

UNITED KINGDOM

ACT Blade Limited..................... 44 TaiSan...........................................108 Verv...............................................155

UNITED STATES

Principle Power........................... 70

169

Transitioning global energy. Transforming every industry.

InnoEnergy

WTC Tower One, level 10 Zuidplein 84 1077 XV Amsterdam The Netherlands info@innoenergy.com

InnoEnergy Benelux

WTC Tower One, level 10 Zuidplein 84 1077 XV Amsterdam The Netherlands benelux@innoenergy.com

InnoEnergy Brussels Rue Guimard 7 1040 Brussels info@innoenergy.com

InnoEnergy Central Europe ul. Mogilska 43 31–545 Kraków, Poland central.europe@innoenergy.com ul. Chmielna 73 00-801 Warszawa, Poland central.europe@innoenergy.com

InnoEnergy France

5 rue du Louvre 75001 PARIS, France france@innoenergy.com 5 place Nelson Mandela 38000 Grenoble, France france@innoenergy.com

InnoEnergy Germany Albert-Nestler-Strasse 21 76131 Karlsruhe, Germany germany@innoenergy.com Zionskirchstr. 73a 10119 Berlin, Germany germany@innoenergy.com

innoenergy.com

InnoEnergy Iberia

Carrer Jordi Girona, 29 0C Nexus II building 08034 Barcelona, Spain iberia@innoenergy.com Paseo de la Castellana, 259D, 18th fl. 28046 Madrid, Spain iberia@innoenergy.com

InnoEnergy Scandinavia Torsgatan 11, 8th floor 111 23 Stockholm, Sweden scandinavia@innoenergy.com

InnoEnergy USA

7 Whittier Pl Ste 108 PMB 492 Boston, MA 02114 United States usa@innoenergy.com