Miller Facilities Maintenance & Repair

Grainger National Accounts Benefits with XYZ

EASIER - TO - USE EQUIPMENT. FASTER, BETTER REPAIRS. Maintenance & Repair welding around the facility requires the welder to work quickly and efficiently and produce quality work, but hard-to-use welding equipment adds downtime and makes their jobs harder.

WI

L THICK RIA

SS NE

ER

DIAMET RE

MATE

Designed around people, Miller® welding and cutting equipment is easy to use and portable which equates to saving time, and it delivers legendary performance to meet all industry standards.

Quick and easy setup

AUTO - SET™ Eliminates the guesswork when setting weld parameters.

PORTABILITY WITH MVP™ VOLTAGE OPTION Allows connection to common 120 and 240-volt power without the use of tools.

Vending Solutions

Welding Safety and Consumables Keep Organized and Save Time & Money with Grainger’s Vending Solutions for all your Miller Welding Safety & Consumables.

Look on the Metalworking Shared Drive for Pre-Loaded Miller and Bernard Consumables

MIG WELDING Millermatic® 142

951000072 Grainger #812FK6

Lightweight, portable, easy to use and dependable. A great choice when a 120 volt machine will meet all your maintenance shop’s needs. Optional spool gun available for welding aluminum.

WELD TYPES

Butt joints, splices, lap joints, t-joints and plug/spot welding. Welds material up to 3/16-inch (4.8 mm) thick.

AUTO-SET™ TECHNOLOGY

No hassles finding the right parameters: Just set the wire diameter and material thickness, and you’re ready to weld.

SMOOTH-START™ TECHNOLOGY

The best-starting machine in the 120-volt MIG category.

Millermatic® 211 951603 Grainger #40JC22

A complete 120/240-volt single-phase MIG welding package, specifically designed for today’s facility maintenance shops. Everything you need, including an MDX™ 100 MIG gun, cart, power cord extension, consumables kit, spool of .030 steel wire, regulator and welder cover.

WELD TYPES

Butt joints, splices, lap joints, t-joints and plug/spot welding. Welds material up to 3/8-inch (9.5 mm) thick.

ADVANCED AUTO-SET™ TECHNOLOGY

No guesswork when setting weld parameters. Includes five different wire/ gas combinations and .024 in./.6 mm to .035 in./.9 mm wire capabilities.

SMOOTH-START™ TECHNOLOGY

For smooth, spatter-free starts.

MULTI-VOLTAGE PLUS (MVP™)

No tools needed to switch between 120-volt and 240-volt power receptacles.

MIG WELDING Millermatic® 252 907321 Grainger #2GPJ9 This complete MIG welding unit is the most powerful machine in its class.

Includes infinite voltage control for a broad operating range and convenient EZAccess™ consumables compartment with parameter chart. Optional spool gun available for welding aluminum (Grainger# 5GWK9).

WELD TYPES

Butt joints, splices, lap joints, t-joints and plug/spot welding. Welds material up to 1/2-inch (13 mm) thick.

AUTO-GUN™ DETECT

Allows operator to simply pull trigger on MIG gun, spool gun or push/pull gun.

Automatically detects and recalls the voltage, wire feed speed and timer of the

ACTIVE ARC STABILZER

For smooth, spatter-free starts.

LINE VOLTAGE COMPENSATION

Keeps welding output constant even if power input varies by +/- 10%.

Millermatic® 255 951766 Grainger #494D88 The Miller® Millermatic® 255 MIG welder is a complete 250-amp welding package that comes standard with pulsed MIG welding capability. The inverter design means that the Millermatic 255 is less than half the weight of its popular predecessor, the Millermatic 252. Auto-Set™ Elite technology allows you to use preset welding parameters based on metal thickness, shielding gas and welding wire type to achieve optimum welds. You can also set your voltage and wire feed speed manually, for a custom welding arc.

WELD TYPES

AUTO-SET™ ELITE TECHNOLOGY

7-INCH COLOR LCD DISPLAY

Includes pulsed MIG to lower heat input on base materials — plus basic MIG to handle butt joints, splices, lap joints, t-joints and plug/spot welding. Welds material up to 1/2inch (13 mm) thick.

Easy weld start by just setting the wire and gas type, wire diameter (.023 in./.6 mm to .047 in./1.2 mm), and material thickness to increase productivity.

Easy-to-understand interface ensures proper machine setup, reducing setup time and increasing weld time.

MIG WELDING MULTIMATIC® 215 907693 Grainger #49KA66 Easy to use, with the flexibility to handle multiple weld processes so your shop can take on more jobs with less equipment. Connects to 120 or 240 volt input power.

MULTIPROCESS MIG, DC stick and DC TIG. Welds material VERSATILITY up to 3/8-inch (9.5 mm) thick.

AUTO-SET™ ELITE

Just set the wire and gas type, wire diameter and material thickness, and you’re ready to weld.

COLOR LCD DISPLAY

Easy-to-understand interface reduces setup time and increases weld time.

MULTI-VOLTAGE No tools needed to switch between 120 PLUG (MVP™) volt and 240 volt power receptacles.

MULTIMATIC® 220 907757 Grainger #494D92

Gives you the freedom to weld any process that comes up in your maintenance shop. Excellent quality arc using either 120 or 240volt input power. Complete and ready to use.

MULTIPROCESS MIG, DC stick and DC TIG. Welds material up to 3/8-inch (9.5 mm) thick.

VERSATILITY INDUSTRY EXCLUSIVE QUICKTECH™ FEATURE

MIG gun and TIG torch can both stay connected to the machine. Just hit the MIG trigger or the TIG foot control to change peocesses.

AUTO-SET™ ELITE

Just set the wire and gas type, wire diameter and material thickness, and you’re ready to weld.

COLOR LCD DISPLAY

Easy-to-understand interface reduces setup time and increases weld time.

MULTI-VOLTAGE No tools needed to switch between 120 volt PLUG (MVP™) and 240 volt power receptacles.

TIG WELDING MAXSTAR® 161 STH 120-240

907710001 Grainger #53AY44

Easy to use, with the flexibility to handle multiple weld processes so your shop can take on more jobs with less equipment. Connects to 120 or 240 volt input power.

EASY-TO-USE

1. Turn power on.

2. Select process: High-Frequency TIG, Lift-Arc™ TIG, Stick, or 6010 Stick.

3. Set amperage.

Then weld! It’s as easy as 1, 2, 3

PRO-SET™

Easy-to-understand interface reduces setup time and increases weld time.

COMPACT DESIGN Weighing in at 13 lbs. and featuring a ALLOWS FOR convenient handle/shoulder strap, this GREAT little inverter-based TIG/Stick machine can be taken from location to location.

PORTABILITY

DYNASTY® 300 WIRELESS FOOT CONTROL COMPLETE

951937 Grainger #796U02

Experience unfailing precision arc performance paired with a state-of-the-art, user-friendly interface that puts advanced capabilities at your fingertips.

Dynasty TIG power sources help minimize error and achieve high-precision welds every time, making the best welders even better.

AUTO-LINE™ TECHNOLOGY

For portability and reliability allowing for any single-phase input voltage hookup (208–600V) with no manual linking. Ideal solution for dirty or unreliable power.

PRO-SET™

Easy-to-understand interface reduces setup time and increases weld time.

PROGRAM MEMORY

Allows easy naming, saving and recalling of favorite weld settings

LOCKS AND LIMITS

Provides control of the weld parameter ranges minimizing deviations from the welding procedure specifications (WPS).

STICK WELDING 907810 GRAINGER #61CZ83 907770 GRAINGER #61CZ84

CST 282

This compact, 35 pound, goes-anywhere welder delivers 280 amps of superior Stick and TIG performance with Auto-Line™ Technology to utilize nearly any source of primary power.

AUTO-LINE™ TECHNOLOGY

Works in more places with Auto-Line™ Technology which automatically calibrates the power source to operate properly when connected to any primary input voltage ranging from 208-575 volts, single- or threephase, 50 or 60 Hz - with no manual linking required.

PORTABLE CST MODEL

Weighing only 34.6 pounds, easily move around a jobsite for increased operator comfort and safety. It is 7 pounds (20%)

SIMPLE & ACCURTAE

Digital meter and push-button controls for more precise setting when presetting or monitoring welding amperage.

PLASMA CUTTING 907579001 Grainger #49X316

SPECTRUM 625 X-TREME

This compact, 23 pound, goes-anywhere plasma cutter delivers powerful 40 amps cuts up to 5/8" mild steel. Plus, versatility with Auto-Line™ and X-Treme protection with X-case.

XT40 TORCH INLCUDED

Big power: Cuts up to 5/8-inch mild steel.

Lightweight and portable. Requires 6 cfm of airflow at 90 psi.

MULTI-VOLTAGE No tools needed to switch between 120-volt PLUG (MVP™) and 240-volt power receptacles.

AUTOMATIC AIR Compensates for input pressure variation.

Provides constant recommended torch REGULATION pressure for optimum cutting performance Click Here for Plasm Cutting Selection Chart

AUTO-LINE™

Allows for any input voltage hookup (208-575 V, single- or three-phase) with no manual linking, providing convenience in any job setting.

INDUSTRIAL WELDING 907826 GRAINGER #811AZ6 907826001 GRAINGER #812FJ8

BOBCAT 265

Rugged welder/generators great for stick and flux-cored welding. Designed for maintenance/repair operations, construction, farm, ranch and generator use.

REMOTE START /STOP

Easily turn your Bobcat machine on and off remotely, so it only runs when you need it. Saves yo to $1,500 per year on fuel & maintenance by shutting the machine off

LESS NOISE

The noise of a welder/generator running all day is irritating — and can even keep you from hearing sounds that warn you of potential hazards.

HANDS FREE STARTING

eChoke™ technology automatically sets the proper air/fuel mixture and eliminates the need to manually engage the choke, so coldstarting is now hands free. eChoke is a trademark of Kohler Co.

XMT 350 FIELDPRO

Click Here for documented VAlue

Every year, outdated welding equipment can cost you thousands of dollars and hundreds of hours of productive time. Step up to Miller XMT 350 FieldPro systems with ArcReach® technology — and improve your bottom line!

Game-changing welding technologies can stop you from wasting hours every day.

ArcReach welding technology minimizes the nonvalue-added time spent walking to and from the power source — and maximizes arc-on time, weld quality and jobsite safety.

Remote control of the power source without a cord. ArcReach technology uses the existing weld cable to communicate welding control information between the feeder or remote and power source. This technology eliminates the need for control cords, and their associated problems and costs.

For portability and reliability, Auto-Line allows for any input voltage hookup (208–575 V, single- or three-phase) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable input power.

XMT 350 FieldPro w/ArcReach Stick TIG Remote ArcReach® SuitCase® 12, Bernard™ BTB 300 A Gun Pkg ArcReach® SuitCase® 12, Bernard™ S-Gun™ 250 A Pkg

Available through Grainger Sourcing XMT 350 FieldPro Machine Only Tweeco® XMT 350 FieldPro Machine Only Dinse® XMT® 350 FieldPro™, Tweco®, ArcReach® SuitCase® 12, Bernard™ BTB 300 A Gun Pkg

#423P58 951736 #494D97 951729 #61TC67 951731 907730 907730002 951734

SAFETY GEAR HELMETS

282006

289807

289768

288722

GRAINGER #794C85 DIGITAL ELITE™ SERIES: RAPTOR™

GRAINGER #799Z81 GRAINGER #794C78 GRAINGER #794C91 DIGITAL PERFORMANCE™ DIGITAL PERFORMANCE™ DIGITAL INFINITY™ SERIES: UNITY SERIES: ’64 CUSTOM™ SERIES: RELIC™ Also available Classic Series Black 785WR5 and Digital Infinity Black 794C87

HALF MASK RESPIRATORS

REGULAR S/M REGULAR M/L REGULAR FILTERS NUISANCE O/V S/M NUISANCE O/V M/L NUISANCE OV FILTERS

#34C395 #36RC58 #36RC61 #36RC59 #36RC60 #34C396

JACKETS WELDX™ JACKET

Miller® Exclusive Material Exceeds Standard FR Cotton Protection Without the Weight of Leather

MEDIUM LARGE X-LARGE 2X-LARGE

#43EN24 247115 #10N009 247116 #10N010 247117 #10N011 247118

*Small, 3XL, 4XL and 5XL available through Grainger Sourcing.

CLASSIC CLOTH

Designed to Endure Everyday Industrial Use

MEDIUM LARGE X-LARGE 2X-LARGE

#34C272 244750 #34C273 244751 #34C274 244752 #34C275 244754

ML00895 ML00895 SA00818 ML00994 ML00995 SA00819

SAFETY & ACCESSORIES GLOVES HEAVY DUTY

PERFORMANCE

CUT-RESISTANT

Premium pig grain, double layered, pre-curved fingers, wing thumb design and flame resistant sewn with 100% Kevlar

Premium goat grain, triple padded palm, unlined for hightened feel and falme resistant sewn with 100% Kevlar.

Unprecedented comfort, performance and protection. ANSI A5 cut rating, level 4 puncture and abrasion rating, and level 3 heat rating. Premium grain leather heightens dexterity and extends wear.

MIG/Stick Gloves

TIG Gloves

Welding Gloves

MIG

SMALL MEDIUM LARGE X-LARGE

#383AJ5 290412 #383AJ6 290413 #383AJ7 290414 #383AJ8 290415

SMALL MEDIUM LARGE X-LARGE

#802GP6 290401 #802GP5 290402 #802GP4 290403 #802GP3 290404

TIG*

LARGE #33RN06 263339 X-LARGE #33RN07 263340

SMALL #20XD79 263346 MEDIUM #33RN16 263347 LARGE #33RN17 263348 X-LARGE #33RB18 263349

MACHINE ACCESSORIES

301262

Millermatic 142/190/211 & Multimatic 215 Protective Cover Available through Grainger Sourcing

042934 GRAINGER #1Z572 UNIVERSAL CART AND CYLINDER RACK

ENVIRONMENTAL SOLUTIONS FILTAIR MWX SELF CLEANING FUME

EXTRATOR 7 FT ARM 10 FT ARM 12 FT ARM

#36XR10 951510 #36XR11 951511 #36XR12 951512

PAPR with T94 Industrial respiratory protection for welding applications.

T94-R T94i-R HARD HAT T94iH-R

#408M96 #408M95 #794TG9

264575 264573 287510

MRO WELDING PRODUCT GUIDE FluxCored

Pulse MIG

DC TIG

AC TIG

Weld Processes Stick

Carbon

Plasma Arc Cutting Gauging

Steel

in iu m

Weld Processes MIG

Al um

Material Thickness RANGE

Silicon Bronze

Weld Voltage Input 110120V

208V

220240V

208575V

Weld Input Single Phase

Three Phase

951000072 #812FK6

Millermatic ® 142

24 ga.

(0.6 mm) to 3/16 in.

(4.8 mm)

 

   

24 ga.

(0.6 mm) to 3/8 in.

(9.5 mm)

 

   





24 ga.

(0.6 mm) to 3/8 in.

(9.5 mm)

 





   





24 ga.

(0.6 mm) to 3/8 in.

(9.5 mm)

 

  

   



22 ga.

(0.9 mm) to 1/2 in.

(13 mm)

 

  

   

24 ga.

(0.6 mm) to 1/2 in.

(13 mm)

  

  

 









951603 #40JC22

Millermatic

®

211

907693 #49KA66

Multimatic ® 215 907757 #494D92

Multimatic

®

220

907321 #2GPJ9

Millermatic ® 252 951766 #494D88

Millermatic

®

255

907710001 #53AY44

Maxstar ® 161 STH

24 ga.

(0.6 mm) to 3/16 in.

(4.8 mm)



Up to 3/8 in (9.5 mm)

  

Up to 3/16 in (4.8 mm)







951937 #796U02

Dynasty

®

300

  



  

907770 #61CZ84

CST™ 282





 

907579001 #49X316

Spectrum ® 625 X-TREME ™

Up to 5/8 in (15.9 mm)







907792001 #55XC38

Bobcat ™ 265

 



     

Generator Output Rated 11,000 watts peak, 9,500 watts continuous

951736 #423P58

XMT ® 350 Fieldpro ™

   



   



  