Belleville springs provide the only force that holds tools in the spindle while cutting, and they are often the first to wear out on a CNC Machining Center.
Drawbars can have over 140 Belleville springs in the stack. Just the slightest wear, or one broken spring will have a huge effect on clamping force, causing chatter, bad finishes, reduced cutter life, and scrapped parts.
Left unchecked, a tool may eventually pull out of th spindle during a cut and damage the spindle, cutter, arbor, and fixture.
Machines are never the same after a crash.
Problems with repeatability, bad finishes, and short cutter life can be frustrating and difficult to diagnose. Up in the spindle and out of sight, drawbars seldom get the attention they deserve. To check it requires a special tool designed just for that purpose. Previously these tools cost many thousands of dollars, but now you can check your spindle for a fraction of that cost.
The Clamprite Gage simulates a tool in the spindle, and checks the drawbar in less than a minute. It has no batteries, clumsy cables, or delicate electronics to burn out. The pressure gauge reads directly in pounds/force, so there are no conversions or calculations to perform.
Thousands of shops in the U.S. and around the world use the Clamprite Gage. Customers often say it paid for itself the first time they used it.
Find out if
Clamprite Gage Kits provide the most economical method of checking the drawbar force of your machine. Kits are furnished in a foam fitted metal tool box and includes the gage head, a spindle adapter, and an internal transfer screw coupling (not shown) that accepts all pull studs.
The universal gage head accepts all sizes and types of spindle adapters, incl. CAT, BT, ISO, HSK, CAPTO, and others. Select your kit by spindle type and maximum drawbar force you will be testing. Additional adapters sold separately.
• NAKAMURA TOME #SC-450 & SC-300 CNC TURNING CENTERS
• (NEW 2007) MORI-SEIKI #DURA-VERTICAL 5060 CNC VMC
• TSUGAMI #FMA5-2 CNC FMS
• (NEW 2005) SWI-TRAK #DPM-K4 MILLING MACHINE
• (NEW 2021) ZOLLER #SMILE-420 CNC TOOL PRESETTER
• (NEW 2018) PRYOR MARKTRONIC-MULTIDOT 3000 DOT PEEN MARKING SYSTEM
• OKUMA #GU-34S CNC UNIVERSAL GRINDER
• OKUMA & HOWA #ACT-2SP-2 CNC TWIN-SPINDLE CHUCKER
• (NEW 2016) ZEISS #CONTURA 7/10/6-RDS CNC CMM
• (NEW 2014) ZEISS #CONTURA-G2 7/10/6-RDS CNC CMM
• (NEW 2007) MITUTOYO #CRYSTA-APEX A710 CNC CMM
• (NEW 2013) STARRETT #HDV-300 OPTICAL COMPARATOR
• (QTY. 4) TESA MICROHITEs
• ACER ENGINE LATHE, MOORE JIG BORER, LARGE QUANTITY OF #BT-40 CNC
TOOLHOLDERS, FULL ARRAY OF INSPECTION TOOLING, STARRETT PINK GRANITE SURFACE PLATES, NEW CARBIDE PERISHABLE TOOLING, LISTA AND VIDMAR STORAGE CABINETS & SOOO MUCH MORE!!!
UPCOMING AUCTION
Leading Industrial And Commercial Liquidators. Contact Rabin Worldwide For Your Liquidation And Equipment Needs
Breaks
• 2023 Femco Fire Roaster System
• Tomato Prep Tower & Evaporators
• Liquid Blend Tanks, Mix & Cook Decks
• Angelus 61H Can Closing Machines
• (20) FMC 2-Shell Can Cooker Coolers
• (6) Labeling & Case Packaging Lines • Whallon de-pals; Alvey Case Palletizers •
• 30 Vaults + 1
WEDNESDAY, AUGUST 20TH., 2025 AT 10:00 AM 9000 Glenoaks Blvd, Sun
FRIDAY, AUGUST 22, 2025 AT 11AM
• Shanghai Boevan BHD-130S Horizontal Form Fill and Seal
• Guang Zhou Ming Yue Vertical Form Fill Bagger with Liquid Piston Filler
• (2) 500’ Spools Southwire THHN 400 Single Strand Copper Electrical Wire Air Compressors & Generator
• 125 HP Ingersoll-Rand R90N-A VSD Efficiency Air Compressor (2017)
• 100 HP Atlas Copco Model GA75VSD-FF Air Compressor (2019)
• (2) Kaeser Air Compressors, Model SK-15 and BSD-50
• (2) 10-HP Atlas Copco Vertical Air Compressors
• 34 KW Kohler Model 30REOZJB Diesel Backup Generator (2006) Golf and Maintenance Carts
• 2021 Pack Mule Maintenance Type Cart
• EZ-Go Express S4 Lifted Electric Golf Carts
• Carryall 550 Electric Golf Cart w/ Truck Bed Welding Equipment & Cubiscans
• OTC Single-Robot Welding Cell (New 2010)
• Avani WB-6057G 6’ x 4’ x 8’ Enclosed Welding Booth (New 2014)
• Various Dust Collectors
• (2) CubiScan Model 150 Package Dimensioning Systems (New as 2019)
18% ON-LINE BUYERS PREMIUM
FRIDAY. SEPTEMBER 5TH, 2025 @ 9:00 A.M. LIVE ONSITE & ONLINE AUCTION ABSOLUTE AU T O ABSOLUTE AUCTION 11615 US-127, West Manchester, OH 45382
Excavators: 2014 Bobcat E35 Mini Excavator, 1232 Hours, Erops, rubber tracks, grading blade, hydraulic thumb, coupler, aux hydraulics, heat, air, radio, Runs and Operates, SN: A93K18975; Case 880 excavator, reads 4,265 hours, steel tracks; Dump Trucks: 1995 Ford 8000 Single Axle Dump Truck, 61,548 Miles, Manual Transmission, PTO, 10FT Steel Dump Bed, Roll Tarp, Air Brakes, Steel Wheels, Electric Brake Controller, Runs and Operates, VIN: 1FDXF80CXSVA38536; 1989 Ford F800 Single Axle Dump Truck, 99,939 Miles showing, Steel Dump Bed, single axle dual wheels, wood side boards, manual transmission, heat, air, radio, Runs and Drives, VIN: 1FDXK84A3KVA09660 SELLS WITH TITLE GUAR ANTEED; Day Cab Trucks: 2006 International 9200 semi, 302,571 miles, headache rack, heat/air, radio, SN#2HSCESBR16C355936; Service Trucks: 2005 Ford F550 XL Super Duty 138,588 Miles, Reading Metal Service Body, shovel boxes ladder racks, Crew Cab, dually, heat, ac, radio, Runs and Drives, VIN: 1FDAW57PX5EC73519 SELLS WITH TITLE GUARANTEED; Cranes: 1985 Grove TMS528B Crane, 870 Upper hours, 70,212 Miles, 3 stage boom with swing away jib, out riggers, tandem axle, truck, MORE INFO TO COME; Telehandlers: Sky Trak 10054 Telehandler Meter reads 4063 hours, 54 foot reach, 10,000 LB lift capacity, out riggers, EROPS, power angle fork carriage, Runs and Operates, SN: 1096; Boom Lifts: Grove AMZ68XT manlift, reads 3,439 hours, JIB, ground controls, runs and drives; Scissor Lifts: 2007 Genie GS-3246 scissor lift, 158 hours, power to platform, SN#GS460783250; Forklifts: Case 586E Rough Terrain Forklift, 2,564 Hours, 2 stage mast, 4x4 OROPS, lights, adjustable forks Runs and Operates, SN:16299039; Case 586E Rough Terrain Forklift, 1263 Hours, 2 stage mast, 4x4 OROPS, lights, adjustable forks Runs and Operates, SN: AJB0027351; Case 580G Rough Terrain Forklift, 4x4, 2 stage mast, side shift, OROPS Runs and Operates; Loader Backhoes: 2007 Case Super M Series 2 1365 Hours, Extendahoe, 4x4 24 inch digging bucket work lights, EROPS heat, ac, Runs and Operates, SN: N6C412151; 1997 Case Super M Backhoe 1218 Hours, EROPS with heat, air, Extend a Hoe, 4x4, Runs and Operates, SN: JJG0199898; Dozers: 1989 Case 850D Long Track Dozer, 1274 hours, showing, OROPS, 8FT 10IN 4 way blade, rear drawbar, Runs and Operates, SN: JAK0002172; 2012 Case 1150K WT Dozer, 1190 hours, EROPS, rear drawbar, sweeps, 11Ft 6 way blade, heat, air, radio, Runs and Operates, SN: NCDC11072; Crawler Loaders: Case 1150B Crawler Loader, 2977 hours, 6Ft 9In bucket, rear weight, rear drawbar, OROPS, SN: 7303570; Skid Steers: Bobcat 743 skid steer, 2,437 hours, OROPS, bucket, SN#5019M18691; Trenchers: Case DH5 Ride On Trencher Meter reads, 190 hours, Front mounted 5ft trencher rear grading blade, articulating, set of 15 rear weights, Runs and Operates, SN: 1215303; Compactors: Case W252 double drum roller, hours around 983, vibratory, runs and drives, SN#841117576; Motor Graders: Huber Maintainer M-850-A, 922 hours, 9 Ft. belly blade, 6 Ft. front blade, hydrostatic drive, runs and operates good, canopy; Enclosed Trailers: 2018 Interstate 19 Ft box trailer, tandem axel, rear roll up door, passenger side door at front, ball hitch, SN#1UK500H26J1093156; Tag Trailers: Butler 16 FT. bumper pull trailer; 16 FT. bumper pull trailer, tandem axle, tilt deck, front tool box; Wood Chippers: ASPLUNDH tree chipper, pull type, single axel; Box Scrapers: Boss BX-12 box scrapper, 12 Ft. long, mounts on wheel loader or backhoe bucket, low use; Concrete Forms: (4) Mod-U-Forms 8FT X 2FT wall forms, lot contains 20 forms each, selling 20 times the money (bid); (3) Symons 8FT X 2FT Wall Forms form ply face - (2) lots contain 20 Forms each, (2) lots contain 13 Forms each, (1) lot contains 22 Forms, Selling per lot quantity times the money; (10) Symons 4FT X 2FT Wall Forms form ply face - (9) lots contain 18 Forms each, (1) lot contains 19 Forms, Selling per lot quantity times the money; (3) Mod-U-Forms 4FT X 2FT wall forms, ply face, lots contain 16 forms each, selling 16 times the money; (10) Symons 3FT X 2FT Wall Forms form ply face - (2) lots contain 16 Forms each, (8) lots contain 20 Forms each, Selling per lot quantity times the money; (7) Wall Forms 6FT X 2FT - (4) Mod-U-Forms ply face lots (3 lots contain 16 forms each, 1 lot contains 17 forms), (3) Symons
(2
contain 16 forms each, 1 lot contains 19 forms), selling per lot quantity times the money; Pier forms - (1) lot 2FT
4
20
hinge corners assortment of (2) 8 Ft, (4) 6 Ft, (9) 4 Ft, (5) 3 Ft, (3) 2 Ft; Concrete Equipment: (2) Symons scaffolding brackets; Symons assortment of small fillers and outside corners; Symons assortment of 8 Ft. corners; Symons assortment of 8 Ft & 6 ft small fillers; Symons 4 ft. corners and assortment of small fillers; Symons 4 ft. corners; Symons corners (10) 4 Ft inside corners, assortment of outside corners and small fillers; Symons 4 Ft inside corners, and assortment of outside corners; Symons and Mod-U-Forms frames assortment, (6) 6FT X 2Ft, (1) 5FT X 2FT, (1) 4FT X 2FT; Symons Custom Made refacing tool, for all sizes of symons forms; Wooden brickledge 24 In. wide; BRODERSON MH42B hydra hammer concrete breaker, hours are believed to be around 953, runs and drives, worked well when last used a few years ago, SN#897B; Buckets: Backhoe 30 IN. digging bucket; Backhoe 18 IN. digging bucket; Excavator 36 IN. bucket, with teeth (2); Excavator 24 IN. bucket, with teeth; Werk-Brau excavator digging bucket, smooth edge; Excavator 18 IN. bucket, with teeth (2); Excavator 12 IN. bucket, with teeth; Excavator 12 IN. bucket, smooth edge; Telehandler 96IN bucket, fits on Sky Trak telehandler; Telehandler 62IN bucket; Concretet mud bucket, door, lift from top; Attachments: Ripper attachment for a backhoe (2); Ripper for excavator, 12FT working width; Grapple for excavator; Man Baskets: Steel 12 FT. man basket with fork pockets, trey, and cup holders; Steel 8FT X 8FT man basket with fork pockets, tray, and cup holders; Steel 9FT X 4FT man basket with fork pockets, tray, and cup holders (2); Steel storage crate 4FT X 6Ft; Fuel Systems: Gasboy 1,000 gallon fuel tank, Gasboy electric pump; Lumber: Lumber 2X6 boards, misc. assortment of 2X6, 2X4 boards various lenghts (2 lots); Lumber 2X4 boards, misc. assortment of 2X4 boards various lenghts; Wooden barricades with removable centers; Lumber 2X8 and other misc. boards and blocks; Fencing: Chain link job site security fence, 6FT X 12FT panels, 44 panels, comes with base pieces; Shop Equipment: Metal rack 5 shelf, rack only no contents; Scaffolding Sections 16 pieces; Scaffolding Sections 17 pieces; Scaffolding sections; Scaffolding cross braces; Scaffolding 6FT Sections, 20 pieces; Jakes warehouse cart, 7FT X 42 IN. (2); Tires: Rims and tires (3) 8-14.5, and (2) 714.5; Other: Baldor blower for dust system, electric powered; Metal tubing, flat steel, and contents of the shelf, includes both sides; Metal rack, double sided, 5 shelves per side;
