Page 1

AUGUST 16, 2018 – VOL. 68, ISSUE #17 • Toll-Free: 800-323-1818 • IMPMAGAZINE.COM

SINCE 1951...CONNECTING BUYERS AND SELLERS IN THE METALWORKING AND MANUFACTURING INDUSTRIES

Visit Us at Booth N. 236408

Dollar for Dollar, Ton for Ton, NOTHING COMES CLOSE to a SCOTCHMAN! FI 8510-20M • 85-ton Punch (1-1/16” in 1”)

• 20” Bar Shear

(1“ x 12” Base Plate 1/2” x 20”)

• Angle Shear

(6“ x 6” x 1/2” Crop Off)

• Rectangle Notcher (3“ x 5” x 1/2”)

• Rod Shear

(1-1/2“ Round & 1-1/4” Square)

Scotchman Industries offers a complete line of Hydraulic Ironworkers, Circular Cold Saws, Band Saws, Tube & Pipe Grinder/Notchers & Measuring Systems. Call Toll Free 1-800-843-8844 or Call Direct 605-859-2542 • Website www.scotchman.com • Email info@scotchman.com • Scotchman Industries Inc., P.O. Box 850, Philip, SD 57567

CHOOSE SCOTCHMAN... THE SOLUTION PREFERRED BY METAL FABRICATORS.

Milwaukee, WI Permit No. 530

PAID

ATTENTION: MANAGER, BUY & SELL EQUIPMENT OR CURRENT POSTAL CUSTOMER

7842 Lincoln Avenue • Skokie, IL 60077 • USA

PRESORTED STANDARD U.S. POSTAGE


THE ANSWER

FOR TOUGH FRICTION PROBLEMS

WS2

DRY FILM LUBRICANTS

Tungsten Disulphide & Molybdenum Disulphide • Professionally Bonded In House • Eliminate Galling, Fretting and Drag • Extend Wear Life • Capabilities Beyond Practical Limits of Oils and Greases • Used In Ultra-High Vacuum, Aerospace, Medical and More

TIMESAVER LAPPING COMPOUNDS

For Soft & Hard Metals • Guaranteed Not To Imbed – Will Not Continue To Cut • Helps To Fit Bearings, Valves, Bushings, Gears and Guides • Removes Tool Marks and HighSpots • Precision Finish

PROCESS SL39 - MIL - SPEC - DOD - L - 85645 MICRO SURFACE CORPORATION 270 Hillsdale Avenue, San Jose, CA 95136 408-723-0700 • Fax: 408-723-0710 E-mail: info@ws2coating.com • www.ws2coating.com


WEEKS

Jefferson LA. 70121 (METAIRIE) Sale Time 9:00 a.m. CST 352-804-3981

WEEKS AUCTION CO., INC Auctioneer Grady Weeks LA. Lic. # AB-441 4851 West Hwy. 40 Ocala, FL 34482

After 56 Years of serving the New Orleans Area J-R Equipment Rental Corp has commissioned Weeks Auction Company, LLC to sell these items at Public Auction. for a more detailed list visit www.weeksauction.com or call 352-804-3981

Partial Listing

Trucks/Trailers

2006 FREIGHTLINER FL- TILT BED 2012 FORD F350 FLAT BED 2005 CEHVY 1500 UTILITY

SkidSteers

JOHN DEERE 319E (2) BOBCAT S300 DSL (2) BOBCAT T250 TRACK LOADER (2) BOBCAT T140 TRACK LOADER (2) BOBCAT S130 SKIDSTEER BUCKETS GRAPPLES FORKS TIRES & WHEELS BROOMS

A ucti

Air Compressors Towable (10) AIRMAN PDS185 DIESEL AIRMAN COMPRESSOR PDS390

Light Towers Towable

(10) TEREX RL4000 LIGHT TOWER, KUBOTA DSL

Wheel Loader DYNAMIC LOADER

SWINGER

220

Trenchers

BOBCAT MT52 TRENCHER (2) DITCH WITCH TRENCHER, DITCH-WITCH 6X30” (2) EZ TRENCH, 3”

TOKU BREAKER, PAVING 60LB (2) APT BREAKER, PAVING 60LB (7) APT BREAKER, PAVING 90LB (4) TOKU BREAKER, PAVING 90LB HILTI BREAKER-PAVING 60LB MAKITA BREAKER-PAVING 60LB HILTI BREAKER-PAVING 60LB

Concrete GA Buggies (4) WHITEMAN BUGGY, 16CF (2) STONE BUGGY 16CF

Concrete Grinders

Saws/

KOSHIN PUMP, TRASH 3” (3) KOSHIN TRASH PUMP, 2”

HUSQVARNA GRINDER, CONC. ELEC 1 DISC (2) TARGET GRINDER, CONC.

MULTIQUIP TRASH PUMP, 2”

GAS, 2 DISC

Demoltition Hammers

(2) APT HAMMER, DEMOLITION 30LB (4) TOKU HAMMER, DEMOLITION 30LB BOSCH HAMMER, ROTARY 11224 (2) HILTI HAMMER, ROTARY 11232 BOSCH HAMMER-CHIPPING/ BOSCH (4) HILTI HAMMER-DEMO/ BOSCH STANLEY HYDRAULIC HAMMER F/323 (2) APT ROCK DRILL, 37LB

(3) HILTI SAW, CUT OFF GAS 14” HUSQVARNA SAW, CUT OFF GAS 14” CRAIN SAW, JAMB 6-1/2” CRAIN SAW, JAMB 6-1/2” MAKITA SAW, RECIPROCATING SAW, RECIPROCATING

IMPMAGAZINE.COM • AUGUST 16, 2018

Concrete Finsihing

(2) WHITEMAN TROWEL 36” (3) WHITEMAN TROWEL 48” BULL FLOAT MULTIQUIP VIBRATOR 2 HP

WEEKS AUCTION CO., INC

Tile/Brick Equipment & Saws

SATURDAY AUGUST 18, 2018 SATURDAY, AUGUST 18, 2018 2812 Jefferson Hwy.

2812 Jefferson Hwy.,LA. Jefferson, LA 70121 (METAIRIE) Jefferson 70121 (METAIRIE) Sale Time9:00 9:00 A.M. Sale Time a.m.CST CST 352-804-3981 352-804-3981

After 56 Years of serving the New Orleans Area, J-R Equipment Rental Corp has commissioned Weeks Auction Company, LLC to sell these items at Public Auction. For a more detailed list, visit www.weeksauction.com or call 352-804-3981

Online Bidding Available at

WWW.WEEKSAUCTION.COM WWW.WEEKSAUCTION.COM

TRUCKS/TRAILERS

WELDERS

SKIDSTEERS

TURF EQUIPMENT

• 2006 FREIGHTLINER FL- TILT BED • 2012 FORD F350 FLAT BED • 2005 CHEVY 1500 UTILITY

• JOHN DEERE 319E • (2) BOBCAT S300 DSL • (2) BOBCAT T250 TRACK LOADERS • (2) BOBCAT T140 TRACK LOADERS • (2) BOBCAT S130 SKIDSTEERS • BUCKETS • GRAPPLES • FORKS • TIRES & WHEELS • BROOMS

MINI EXCAVATORS

• JOHN DEERE 17G • JOHN DEERE 17E • BOBCAT 341 • BOBCAT 334 • BOBCAT 323 • KUBOTA KX41-3V

FORKLIFTS

• HYUNDAI HLF 30-5E 6000LB GAS • HYUNDAI HLF 25-5 5000LB GAS • TCM FORKLIFT, FD40 9000LB DSL • (5) TCM FCG25 5000LB GAS • (3) TCM FG15 3000LB GAS

SCISSOR LIFTS

• LINCOLN WELDER, 250 AMP, DIESEL TOWABLE • (2) MULTIQUIP WELDERS, PORTABLE

• STIHL HEDGE TRIMMER, GAS • HUSQVARNA HEDGE TRIMMER, GAS • (3) DR MOWERS, FIELD & BRUSH • BILLY GOAT MOWER, FIELD & BRUSH • CLASSEN MOWER, FIELD & BRUSH • LAWN ROLLER • (2) CLASSEN SOD CUTTERS, 18”

CONCRETE BREAKERS

• TOKU BREAKER, PAVING 60LB • (2) APT BREAKERS, PAVING 60LB • (7) APT BREAKERS, PAVING 90LB • (4) TOKU BREAKERS, PAVING 90LB • HILTI BREAKER-PAVING 60LB • MAKITA BREAKER-PAVING 60LB • HILTI BREAKER-PAVING 60LB

CONCRETE GA BUGGIES • (4) WHITEMAN BUGGY, 16CF • (2) STONE BUGGY 16CF

• (2) APT HAMMERS, DEMOLITION 30LB • (4) TOKU HAMMERS, DEMOLITION 30LB • BOSCH HAMMER, ROTARY 11224 • (2) HILTI HAMMERS, ROTARY 11232 • BOSCH HAMMER-CHIPPING • (4) HILTI HAMMERS-DEMO/ BOSCH • STANLEY HYDRAULIC HAMMER F/323 • (2) APT ROCK DRILLS, 37LB • (3) APT ROCK DRILLS, 55LB

LOG SPLITTERS

• (2) NORTHSTAR LOG SPLITTERS, 22 T

PRESSURE WASHER/ SPRAYERS

• (4) BE PRESSURE WASHERS, 2500 PSI • BE PRESSURE WASHER, 4000 PSI • TROYBILT POWER SPRAYER

PUMPS

• KOSHIN PUMP, TRASH 3” • (3) KOSHIN TRASH PUMPS, 2” • MULTIQUIP TRASH PUMP, 2”

• (10) AIRMAN PDS185 DIESELS • AIRMAN COMPRESSOR PDS390

• (3) HILTI SAWS, CUT OFF GAS 14” • HUSQVARNA SAW, CUT OFF GAS 14” • (2) WHITEMAN TROWEL 36” • (3) WHITEMAN TROWEL 48”, BULL FLOAT • CHAIN SAW, JAMB 6-1/2” • MAKITA SAW, RECIPROCATING • MULTIQUIP VIBRATOR 2 HP ELECTRIC

CONCRETE FINISHING

LIGHT TOWERS TOWABLE

• (10) TEREX RL4000 LIGHT TOWER • KUBOTA DSL

WHEEL LOADER

CONCRETE/MORTAR MIXER • STONE MIXER, CONCRETE 6CF • (3) WHITEMAN MORTAR 9 CF

PLATE COMPACTORS

• (3) MIKASA COMPACTORS, PLATE 35-3900#

• DYNAMIC SWINGER 220 LOADER

CORE DRILLS

• BOBCAT MT52 TRENCHER • (2) DITCH WITCH TRENCHERS • DITCH-WITCH 6X30” • (2) EZ TRENCH, 3”

CONCRETE SAWS/ GRINDERS

TRENCHERS

GENERATORS

• GENERATOR, 4000 WATT

• DIAMOND PRODUCTS DRILL, CORE • (2) HILTI DRILL, CORE • (2) BLACK & DECKER DRILL, MAGNETIC 1-1/4” CHUCK

Bidding Starts Aug. 27th Ending Aug. 30th, 2018 @ 10:00 AM 201 Ellis St., Stryker, OH 43557

Pre-View Dates: August 22nd, August 24th & August 27th – 10:00 AM to 2:00 PM

• • • • • • • • •

CHILLING TOWERS TANKS HOPPER LOADERS DUST COLLECTORS BLENDERS BAGGERS OVENS TAPPERS BANDERS

• HUSQVARNA BRIKSAW, 14” ELEC • (2) FELKER SAWS, TILE 8/10” • FELKER SAW, TILE SM10150 • MULTIQUIP SAW, FLOOR/SLAB 11HP/13HP • DIAMOND SAW,FLOOR/SLAB, 11HP/13HP • FELKER TILE ROLLER, 100# • EDDY TILE STRIPPER, ELECTRIC • (6) PALMER TILE STRIPPERS, ELECTRIC • (2) EDCO PLANERS, CONCRETE

• STUMP GRINDERS

For Terms, Conditions, Sales Tax, Buyers Premiums and More Detail, Visit www.weeksauction.com

Connecting Buyers and Sellers since 1951

• • • • • • • • •

FORKLIFTS SCRUBBERS MATERIAL HANDLING EQUIPMENT AIR COMPRESSORS GRINDERS MANIFOLDS CONTROLLERS TESTERS & OTHER SUPPORT EQUIPMENT

TERMS: VISA OR M/C OR WIRE TRANSFER. 18% BUYER’S PREMIUM ADDED. Check our Website for Complete Listing

WILSON AUCTION & REALTY CO., LTD. 825 N. Main St., Bryan, OH 43506 419-636-5500 • Toll Free: 866-870-5500 www.WilsonAuctionLtd.com

TILE/BRICK EQUIPMENT & SAWS

• HUSQVARNA GRINDER, CONC. ELEC 1 DISC • (5) DOSKOCIL STUMP GRINDERS, • (2) TARGET GRINDERS, CONC. GAS, 2 DISC MDL 337

Connecting Buyers and Sellers in the Metalworking Industry...Since 1951

PLASTIC INJECTION MOLDING EQUIPMENT

SAWS

ments have been made. All Checks must be payable to Weeks Auction Co., LLC. No bank drafts will be accepted. Sales Tax: All Purchases are subject to LA sales tax unless you have a sales tax exemption. A sales tax certificate must be executed on sale day; failure to provide a certificate will require the peyment of sales tax on all purchases. Municipal Consignors have the right to remove any piece from sale. Buyers Premium: A 10% Buyers Premium will be charged on each item, in addition to the internet buyers premium. A 2.5% INTERNET BUYERS FEE capped at $750.00 Per Item will be charged on all internet purchases.

AIR COMPRESSORS-TOWABLE

ONLINE AUCTION ONLY COMPLETE LIQUIDATION OF

DEMOLITION HAMMERS

Terms & Conditions: Payment Cash or Cashier’s Check. All Wire Transfers, Personal and Company Checks must have a bank letter of Reference. Unless prior arrang-

• (2) JLG 1930 SCISSOR LIFTS, 19’ • JLG 2630 SCISSOR LIFT, 26’

n

Saws

HUSQVARNA BRIKSAW, 14” ELEC (2) FELKER SAW, TILE 8/10” FELKER SAW, TILE SM10150 Welders ELEC MULTIQUIP SAW,FLOOR/SLAB LINCOLN WELDER, 250 AMP, Mini Excavators 11HP/13HP Concrete/Mortat DIE-SEL TOWABLE JOHN DEERE 17G MULTIQUIP SAW,FLOOR/SLAB (2) MULTIQUIP WELDER, POR- Mixer JOHN DEERE 17E 11HP/13HP TABLE BOBCAT 341 STONE MIXER, CONCRETE 6CF DIAMOND SAW,FLOOR/SLAB GENERATORS BOBCAT 334 (3) WHITEMAN MORTAR 9 CF 11HP/13HP (3) APT ROCK DRILL, 55LB GENERATOR, 4000 WATT BOBCAT 323 FELKER TILE ROLLER, 100# Plate Compactors Log Splitters KUBOTA KX41-3V Auctioneer Grady Weeks Lic. # AB-441 TurfLA.Equipment EDDY TILE STRIPPER, ELEC(3) MIKASA COMPACTOR, 4851 West Hwy.STIHL 40 Ocala, FL 34482 (2) NORTHSTAR LOG SPLITTER, TRIC HEDGE TRIMMER, GAS Forklifts HYUNDAI HLF 30-5E 6000LB HUSQVARNA HEDGE TRIMMER, PLATE 35-3900# 22 T (6) PALMER TILE STRIPPER, GAS GAS ELEC-TRIC Core Drills Pressure After HLF 5625-5 Years the FIELD New Orleans Area J-R Equipment RentalWasher/ Corp has(2)commissioned (3) DR MOWER, & BRUSH HYUNDAI 5000LBof GASserving EDCO PLANER, CONCRETE DIAMOND PRODUCTS DRILL, Sprayersfor a more detailed list visit BILLY GOAT MOWER, FIELD these & CORE items at Public Auction. TCM FORKLIFT, FD40 9000LB Weeks Auction Company, LLC to sell (4) BE PRESSURE WASHER, Stump Grinders BRUSH DSL (2) HILTI DRILL, CORE www.weeksauction.com or call 352-804-3981 (5) DOSKOCIL STUMP GRINDER, CLASSEN MOWER, FIELD & (2) BLACK & DECKER DRILL, 2500 PSI (5) TCM FCG25 5000LB GAS BE PRESSURE WASHER, 4000 MDL 337 BRUSH (3) TCM FG15 3000LB GAS MAG-NETIC 1-1/4” CHUCK LAWN ROLLER Online Bidding Available PSI at Scissor Lifts Generators TROYBILT POWER SPRAYER (2) JLG 1930 SCISSOR LIFT, 19’ (2) CLASSEN SOD CUTTER, 18” Concrete Breakers GENERATOR, 4000 WATT JLG 2630 SCISSOR LIFT, 26’ Pumps Partial Listing Air Compressors TOKU BREAKER, PAVING 60LB Concrete Saws/ KOSHIN PUMP, TRASH 3” (2) APT BREAKER, PAVING 60LB (3) KOSHIN TRASH PUMP, 2” Trucks/Trailers Towable Grinders (7) APT BREAKER, PAVING 90LB 2006 FREIGHTLINER FL- TILT (10) AIRMAN PDS185 DIESEL HUSQVARNA GRINDER, CONC. MULTIQUIP TRASH PUMP, 2” (4) TOKU BREAKER, PAVING BED ELEC 1 DISC AIRMAN COMPRESSOR PDS390 90LB Saws 2012 FORD F350 FLAT BED Light Towers Tow- HILTI BREAKER-PAVING 60LB (2) TARGET GRINDER, CONC. (3) HILTI SAW, CUT OFF GAS 2005 CEHVY 1500 UTILITY 14” GAS, 2 DISC MAKITA BREAKER-PAVING able HUSQVARNA SAW, CUT OFF SkidSteers 60LB Demoltition Ham- GAS 14” (10) TEREX RL4000 LIGHT JOHN DEERE 319E HILTI BREAKER-PAVING 60LB TOWER, KUBOTA DSL mers CRAIN SAW, JAMB 6-1/2” (2) BOBCAT S300 DSL Concrete GA Bug(2) Checks APT HAMMER, DEMOLITION SAW, JAMB 6-1/2” & Conditions: Payment Cash or Cashier’s Check. All Wire Transfers, Personal and Company must have a bank letter CRAIN of Reference. Unless prior arrang(2)Terms BOBCAT T250 TRACK Wheel Loader ments have been made. All Checks must be payable to Weeks Auction Co., LLC. No bank drafts will be30LB accepted. gies MAKITA SAW, RECIPROCATING LOADER DYNAMIC SWINGER 220 Tax: AllT140 Purchases are subject to LA sales tax unless you have a sales tax exemption. A sales(4) tax TOKU certificate must be DEMOLIexecuted on sale day; failure to provide a cerHAMMER, (4) WHITEMAN BUGGY, 16CF (2)Sales BOBCAT TRACK SAW, RECIPROCATING tificate will require the peyment ofLOADER sales tax on all purchases. Municipal Consignors have the right to remove any piece from sale. TION 30LB LOADER (2) STONE BUGGY 16CF Tile/Brick EquipA 10% Buyers Premium will be charged on each item, in addition to the internet buyers A 2.5%ROTARY INTERNET BUYERS FEE capped at Trenchers BOSCHpremium. HAMMER, (2)Buyers BOBCATPremium: S130 SKIDSTEER Concrete Finsihing 11224 $750.00 Per Item will be charged BOBCAT on all internet MT52purchases. TRENCHER ment & Saws BUCKETS (2) WHITEMAN TROWEL 36” (2) DITCH WITCH TRENCHER, (2) HILTI HAMMER, ROTARY HUSQVARNA BRIKSAW, 14” GRAPPLES (3) WHITEMAN TROWEL 48” DITCH-WITCH 6X30” 11232 ELEC FORKS BULL FLOAT BOSCH HAMMER-CHIPPING/ (2) FELKER SAW, TILE 8/10” (2) EZ TRENCH, 3” TIRES & WHEELS MULTIQUIP VIBRATOR 2 HP BOSCH FELKER SAW, TILE SM10150 BROOMS Welders (4) HILTI HAMMER-DEMO/ MULTIQUIP SAW,FLOOR/SLAB ELEC LINCOLN WELDER, 250 AMP, Mini Excavators BOSCH 11HP/13HP C o n c r e t e / M o r t a t DIE-SEL TOWABLE JOHN DEERE 17G STANLEY HYDRAULIC HAMMER MULTIQUIP SAW,FLOOR/SLAB (2) MULTIQUIP WELDER, POR- Mixer JOHN DEERE 17E F/323 11HP/13HP TABLE BOBCAT 341 STONE MIXER, CONCRETE 6CF (2) APT ROCK DRILL, 37LB DIAMOND SAW,FLOOR/SLAB GENERATORS BOBCAT 334 (3) WHITEMAN MORTAR 9 CF 11HP/13HP (3) APT ROCK DRILL, 55LB GENERATOR, 4000 WATT BOBCAT 323 FELKER TILE ROLLER, 100# Plate Compactors Log Splitters KUBOTA KX41-3V Turf Equipment EDDY TILE STRIPPER, ELEC(3) MIKASA COMPACTOR, (2) NORTHSTAR LOG SPLITTER, TRIC STIHL HEDGE TRIMMER, GAS Forklifts HYUNDAI HLF 30-5E 6000LB HUSQVARNA HEDGE TRIMMER, PLATE 35-3900# 22 T (6) PALMER TILE STRIPPER, GAS GAS ELEC-TRIC Core Drills HYUNDAI HLF 25-5 5000LB GAS (3) DR MOWER, FIELD & BRUSH DIAMOND PRODUCTS DRILL, Pressure Washer/ (2) EDCO PLANER, CONCRETE Sprayers TCM FORKLIFT, FD40 9000LB BILLY GOAT MOWER, FIELD & CORE (4) BE PRESSURE WASHER, Stump Grinders BRUSH DSL (2) HILTI DRILL, CORE (5) DOSKOCIL STUMP GRINDER, CLASSEN MOWER, FIELD & (2) BLACK & DECKER DRILL, 2500 PSI (5) TCM FCG25 5000LB GAS BE PRESSURE WASHER, 4000 MDL 337 BRUSH (3) TCM FG15 3000LB GAS MAG-NETIC 1-1/4” CHUCK PSI LAWN ROLLER Scissor Lifts Generators TROYBILT POWER SPRAYER (2) JLG 1930 SCISSOR LIFT, 19’ (2) CLASSEN SOD CUTTER, 18” Concrete Breakers GENERATOR, 4000 WATT JLG 2630 SCISSOR LIFT, 26’ Pumps

WEEKS

S

INDUSTRIAL MARKET PLACE

Online Bidding Available at

WWW.WEEKSAUCTION.COM

AUCTION

AUCTIONEERS: Wayne M. Wilson CAI Brent J. Wilson CAI Fred Nott Bart Westfall Phil Stotz Rich Merillat Ryan Ruble (Apprentice Auctioneer)

BUSINESS RETIREMENT FOR STEAD ENTERPRISES SATURDAY, SEPTEMBER 8, 2018 AT 10:00 AM Commercial Auction in Ochre River, Manitoba, Canada

SEMI TRACTORS (Both units are safetied and good running order and ready to hit the road) • 2011 Volvo Highway Tractor, Sleeper, Approx. 400,000 Miles, 13 Speed, D-13 , 500 HP Volvo Engine • 2009 Volvo Highway Tractor, Approx. 400,000 Miles, 13 Spd, D-16 Volvo Engine • Salvaged Parts - 373 Ratio, 4 Wheel Rear Lock Up from 1998 Volvo, New Brakes TRAILERS • 2005 53’ Tri-Axle, Step Deck, c/w Metal Sides, Ramp Tail Gate, Safetied • 2012 53’ Tri-Axle Step Deck, Metal Sides, Ramp Tails Gate, Safetied • 2011 Tri-Axle Step Deck, 53’ Sides go to 12’ Width, All New Decking, Safetied • 45’ Semi Van Trailer (Not Safetied- Storage) • Quantity of Chains & Load Binders • Assorted Semi Tires OTHER ITEMS • Approx 800’ New Vinyl Siding • Wheel Chair • Defiance Store Scale CAMPER, BOAT, ETC. • 15’ LeoCraft Hard Bodied Bumper Hitch Camper Trailer • 14’ Fiberglass Boat On Trailer • Yamaha 4 Wheel Golf Cart – As Is • 3 Pontoons CONTACT MURRELL & NANCY HAUGERUD at 204-733-2498

SHOP EQUIPMENT DIRECTIONS: • 20 Ton Shop Press • 12 Ton Pipe Bender Just East of Ochre River, • Sheet Metal Roller MB on Old Highway 5. • Engine Crane • Acklands Plasma Cutter • Miller 180, 230 Volt Wire Feed Welder on Cart • Power Ease 4000 PSI Pressure Washer • Miller 250 AC/DC Heavy Duty Welder • Oil Pump/Tank • EconoHorse Pressure Washer (as-is) • Radial Arm Saw • LeBlond Regal Metal Lathe c/w Taper Cut • Ducar 2500 Watt Generator • Larger (Approx 30 Gal.) Air Compressor, Needs Motor • Electric Motors • 1 Ton Chain Hoist • Miller Welder – as is • Assorted Tools, Not Yet Sorted WHEEL LOADER • 1998 Case 621B xt Wheel Loader, gc, c/w Bucket • Grapple Attachment for Wheel Loader • 20.5x35 Loader Tire YARD CARE • Power Rake • MTD Snow Blower • 6 Wheel Side Delivery Rake for Lawn • Ryan Power Rake • Large Grass Vacuum • Gas Water Pump PROXY BIDDING AVAILABLE AT gartonsauction.com


AUCTIONS

ONLINE PUBLIC AUCTION FORKLIFTS, REACH TRUCKS, ELECT. PALLET JACKS AND MATERIAL HANDLING EQUIPMENT As new as 2011 Equipment from Tempe, AZ Safeway Distribution Center

BID ONLINE: AUGUST 30TH THRU SEPTEMBER 6TH 1115 W. Alameda Dr., Tempe, AZ 85282

FEATURING STAND-UP REACH TRUCKS

(10) Crown RR5725-45 electric single reach stand-up forklifts, 4500 lbs. 270” max fork height, 36 Volt (6) Crown RR5220-45 electric single reach stand-up forklifts, 4500 lbs. 321” max fork height, 36 Volt (4) Crown RM6025-45 electric single reach stand-up forklifts, 4500 lbs. 270” max fork height, 36 Volt (1) Crown RR5225-45 electric single reach stand-up forklift, 4500 lbs. 366” max fork height, 36 Volt (1) Raymond 7400-DR-32TT electric double reach stand-up forklift, 4500 lbs. 336” max fork height, 36 Volt (6) Raymond 740-R45TT electric double reach stand-up forklifts, 4500 lbs. 268” max fork height, 36 Volt (1) Raymond EASI DR30TT electric double reach stand-up forklift, 3000 lbs. 298” max fork height, 36 Volt

FORKLIFTS

(1) Caterpillar model 2P6000 LPG sit down forklift, 6,000 lbs. cap. solid tires

ELECTRIC PALLET JACKS

(4) Crown PE4500-80 electric single pallet jacks, 8,000 lbs. cap., 24 Volt (6) Crown PE4000-80 electric single pallet jacks, 8,000 lbs. cap., 24 Volt (3) Linde EWR80-02 electric double pallet jacks, 8,000 lbs. cap., 24 Volt (5) Linde EWR60-02 electric single pallet jacks, 6,000 lbs. cap., 24 Volt

(54) BATTERY CHARGERS AND BATTERIES

(21) Hobart 36 Volt multi circuit battery chargers, 2 circuits (32) Hobart/Accu-Charger 36 Volt multi circuit battery chargers, 4 circuits (1) Hobart 48 Volt battery charger, 1 circuit

MISCELLANEOUS

(2) Tennant T-20 riding propane floor scrubbers (2) Tennant 7300 riding propane floor scrubbers (1) Tennant 5400 walk-behind electric floor scrubber (1) Tornado LR52 walk-behind electric floor scrubber (39) Rite Hite, Big Ass Fan & Kelley Entermatic electric HVLS fans, 8’ to 15’ blades (3) Safety Storage 0710FRC double pallet push back hazardous storage units Marathon V-6030HD hydraulic vertical baler GPI M60-HP hydraulic vertical baler (10) Forklift dump hoppers

415.522.5700 Sale in Partnership with

Email: info@rabin.com

Visit Our Website for Details and Pictures www.rabin.com


FOR SALE / WANTED

FURNACES & OVENS WANTED August 16, 2018

WE PAY INSTANT CASH

FOR UNUSED SURPLUS BEARINGS

We Buy All Types, Brands and Sizes of Bearings in any Size Lot. We Pay ALL The Freight. This is an excellent opportunity for your firm to realize an immediate return on the obsolete and excess bearings you no longer use.

Give us a call or send your list by E-mail or Fax...

17719 N.E. Sandy Blvd. Portland, Oregon 97230 11900 Globe Street Livonia, MI 48150

800-279-0992

3

CURRENT & PAST ISSUES - VISIT IMPMAGAZINE.COM

Phone: (503) 231-0992 Fax: (503) 231-1190

E-mail: buyback@royalbearing.com

www.royalbearing.com

Do You have Industrial Equipment to Sell or Trade? Call IMP Today @ 800-323-1818

THE W.H. KAY COMPANY The “Elder Statesman” of Used Ovens & Heat Treating Furnaces

SIN

19

OVER 150 IN STOCK…READY FOR INSPECTION & DELIVERY

We Buy/Sell/Trade Furnaces, such as:

Walk-In Ovens • Box • Pit Type • Belt • Atmosphere Generators • Box Type Draw • Internal Quench • Vacuum • Combustion Air Blowers For Complete Specifications and Pricing

Visit Our Web Site: Email: sales@whkay.com www.whkay.com

The W.H.

ay Company

30925 Aurora Rd. • Solon, OH 44139

440-519-3800 • Fax: 440-519-1455

CE

36


4

August 16, 2018

FOR SALE / WANTED

CURRENT & PAST ISSUES - VISIT IMPMAGAZINE.COM

INDEX

COVERS ADVERTISEMENTS OF BOTH EQUIPMENT “WANTED” AND “FOR SALE” AUCTIONS, ON-LINE AUCTIONS, BID SALES..................1A, 2A, 6-10, 3A, 4A

BEARINGS........................................ 3,5

INDUSTRIAL EQUIPMENT.................. 3

BENDING ROLLS..................................

LUBRICANTS...INSIDE FRONT COVER

........................... INSIDE BACK COVER

MACHINERY.................FRONT COVER

BI-FOLD DOORS................................. 3

METALS............................................... 5

CORROSION PROTECTION MATERIAL.3

MIST COLLECTORS............................ 4

ELECTRICAL EQUIPMENT.............. 4,5

OIL MIST COLLECTORS..................... 4

FABRICATING MACHINERY.................

OVENS................................................. 3

......................................FRONT COVER

SCHWEISS BI-FOLD DOORS............. 3

FURNACES....................................... 3,5

SMOKING SHELTERS......................... 5

GRINDING MACHINES...BACK COVER

TRANSFORMERS................................ 4

FULL PAGE ADVERTISERS INDUSTRIAL ASSET RECOVERY GROUP LLC (www.industrial-recovery.com)..... 3A KOSTER INDUSTRIES (www.kosterindustries.com)...................................4A MARENA INDUSTRIES INC. (www.marenaind.com)............. BACK COVER MICRO SURFACE CORPORATION (www.ws2coating.com)......................... ..................................................................................... INSIDE FRONT COVER RABIN WORLDWIDE (www.rabin.com)........................................................... 2A SCOTCHMAN® METAL FABRICATING SOLUTIONS (www.scotchman.com)......... ............................................................................................................FRONT COVER THE WEBB CORPORATION (ww.webbcorporation.com).............................. ........................................................................................INSIDE BACK COVER Connecting Buyers and Sellers in the Metalworking Industry...Since 1951

MIST COLLECTORS

AUGUST 16, 2018 VOLUME 68, NO.17

Since 1951, Industrial Market Place has proven to be a trusted meeting place for the industrial community. By expanding your market, we create new opportunities for buyers and sellers of machinery and industrial equipment.

INDUSTRIAL MARKET PLACE 7842 N. Lincoln Ave., Skokie, IL 60077

For Advertising Information, Call Toll-Free:

800-323-1818 (From United States & Canada)

847-676-1900 • Fax: 847-676-0063 website: www.impmagazine.com e-mail: info@impmagazine.com PUBLISHER Joel Wineberg x204 ART/PRODUCTION DIRECTOR Ashur Mikael x216

DATA ENTRY Ashley Chrzan x218

INTERNATIONAL SALES REPRESENTATIVES Dave Ernst x213 Gloria Lappe x219 Jon Schneider x214 Judie Sibell x221 Dan Tepperman x223 ASSOCIATE PUBLISHERS Jeremy Solomon x202 Eliot Wineberg x201 FOUNDER Henry J. Wineberg (1906 - 1983)

Established in 1951, Industrial Market Place is published every two weeks. All advertisements and designs are the property of the publisher and may not be reproduced in any form without permission. SUBSCRIPTIONS: 26 yearly issues mailed first class. Cost is $195.00 for 1 year; $295.000 for 2 years.

We Accept American Express, Discover, MasterCard and Visa

MEMBER: PEARL  (Professional Electrical Apparatus Recycling League) • INVESTMENT RECOVERY ASSOCIATION INDUSTRIAL MARKET PLACE is listed in Standard Rate and Data Service’s Business Publication Rates and Data.


METALS WANTED

FOR SALE / WANTED

SMOKING SHELTERS

CURRENT & PAST ISSUES - VISIT IMPMAGAZINE.COM

August 16, 2018

5

CALL US TO PURCHASE:

COILS • SHEETS • PLATE • PIPE • STRUCTURALS • WIRE

STEEL • STAINLESS • ALUMINUM

WE ARE GOING INTO OUR 36TH YEAR GOING INT

OF BUYING SURPLUS METAL!

1-800-922-6836

3 Bala Plaza, Suite #202 West Bala Cynwyd, PA 19004

215-922-6855 FAX: 215-922-6467 E-mail: chris@lombardmetals.com Website: www.lombardmetals.com

WE BUY & SELL...NEW, USED AND SURPLUS ELECTRICAL EQUIPMENT If We Don’t Have It, We Will Find It

ELECTRICAL EQUIPMENT WANTED

ELECTRIC MOTORS CONTROLS • TRANSFORMERS – Bought and Sold – • Squirrel Cage • Design D • Gear Motors • Slip Ring Press Motors • D.C. Motors

All of Our Products are Load Tested and Come with a ONE YEAR Warranty Repair Services Are Available Utah Breakers & Supply Has Over 15 Years Experience In The Industry

brent@utahbreakers.com • 801-908-6557 www.utahbreakers.com FURNACES

Affordable Paragon heat treating furnaces PMT

-18

Affordable, reliable, and made in the USA since 1948. 800-876-4328 / 972-288-7557

• 4” thick walls • Safety switch turns off

heating elements when you open the door

• Fully programmable digital $ controller 2,820 .00 • Heavy duty hinge shaft Paragon Industries, L.P. 2011 S. Town East Blvd. • 18” W x 13” D x 13” H Mesquite, Texas 75149 Rated to 2350°F / 1287°C • 800-876-4328 www.paragonweb.com • Many other sizes available info@paragonweb.com

Connecting Buyers and Sellers since 1951 Connecting Buyers and Sellers in the Metalworking Industry...Since 1951

We Sell Reconditioned or “Electrically O.K.” We Will Also Buy Your Spares! Contact:

ROW ELECTRICAL EQPT.

800-248-4479 • FAX: 419-244-8887 E-mail: rowelec@glasscity.net Website: rowelectrical.com

YOUR AD HERE REACH THOUSANDS OF BUYERS WITH IMP MAGAZINE AMERICAN IND 800-323-1818 • IMPMagazine.com


After 56 Years of serving the New Orleans Area J-R Equipment Rental Corp has commissioned Weeks Auction Company, LLC to sell these items at Public Auction. for a more detailed list visit www.weeksauction.com or call 352-804-3981

S

INDUSTRIAL MARKET PLACE

A

TWO DAY ABSOLUTE CRA ucti TUESDAY, AUGUSTn 28TH & WEDN Online Bidding Available at

WWW.WEEKSAUCTION.COM

Partial Listing

Trucks/Trailers

2006 FREIGHTLINER FL- TILT BED 2012 FORD F350 FLAT BED 2005 CEHVY 1500 UTILITY

SkidSteers

JOHN DEERE 319E (2) BOBCAT S300 DSL (2) BOBCAT T250 TRACK LOADER (2) BOBCAT T140 TRACK LOADER (2) BOBCAT S130 SKIDSTEER BUCKETS GRAPPLES FORKS TIRES & WHEELS BROOMS

Air Compressors Towable (10) AIRMAN PDS185 DIESEL AIRMAN COMPRESSOR PDS390

Light Towers Towable

(10) TEREX RL4000 LIGHT TOWER, KUBOTA DSL

Wheel Loader DYNAMIC LOADER

SWINGER

220

Trenchers

BOBCAT MT52 TRENCHER (2) DITCH WITCH TRENCHER, DITCH-WITCH 6X30” (2) EZ TRENCH, 3”

TOKU BREAKER, PAVING 60LB (2) APT BREAKER, PAVING 60LB (7) APT BREAKER, PAVING 90LB (4) TOKU BREAKER, PAVING 90LB HILTI BREAKER-PAVING 60LB MAKITA BREAKER-PAVING 60LB HILTI BREAKER-PAVING 60LB

Concrete GA Buggies (4) WHITEMAN BUGGY, 16CF (2) STONE BUGGY 16CF

Concrete Grinders

Saws/

KOSHIN PUMP, TRASH 3” (3) KOSHIN TRASH PUMP, 2”

HUSQVARNA GRINDER, CONC. ELEC 1 DISC (2) TARGET GRINDER, CONC.

MULTIQUIP TRASH PUMP, 2”

GAS, 2 DISC

Demoltition Hammers

(2) APT HAMMER, DEMOLITION 30LB (4) TOKU HAMMER, DEMOLITION 30LB BOSCH HAMMER, ROTARY 11224 (2) HILTI HAMMER, ROTARY 11232 BOSCH HAMMER-CHIPPING/ BOSCH (4) HILTI HAMMER-DEMO/ BOSCH STANLEY HYDRAULIC HAMMER F/323 (2) APT ROCK DRILL, 37LB

Saws

(3) HILTI SAW, CUT OFF GAS 14” HUSQVARNA SAW, CUT OFF GAS 14” CRAIN SAW, JAMB 6-1/2” CRAIN SAW, JAMB 6-1/2” MAKITA SAW, RECIPROCATING

(2) WHITEMAN TROWEL 36” (3) WHITEMAN TROWEL 48” BULL FLOAT MULTIQUIP VIBRATOR 2 HP

Tile/Brick Equipment & Saws

HUSQVARNA BRIKSAW, 14” ELEC (2) FELKER SAW, TILE 8/10” FELKER SAW, TILE SM10150 Welders ELEC MULTIQUIP SAW,FLOOR/SLAB LINCOLN WELDER, 250 AMP, Mini Excavators 11HP/13HP Concrete/Mortat DIE-SEL TOWABLE JOHN DEERE 17G MULTIQUIP SAW,FLOOR/SLAB (2) MULTIQUIP WELDER, POR- Mixer JOHN DEERE 17E 11HP/13HP TABLE BOBCAT 341 STONE MIXER, CONCRETE 6CF DIAMOND SAW,FLOOR/SLAB GENERATORS BOBCAT 334 (3) WHITEMAN MORTAR 9 CF 11HP/13HP (3) APT ROCK DRILL, 55LB GENERATOR, 4000 WATT BOBCAT 323 FELKER TILE ROLLER, 100# Plate Compactors KUBOTA KX41-3V Auctioneer Grady Weeks Lic. # AB-441 Log Splitters TurfLA.Equipment (3) MIKASA COMPACTOR, (2) NORTHSTAR LOG SPLITTER, EDDY TILE STRIPPER, ELEC4851 West Hwy.STIHL 40 Ocala, FL 34482 HEDGE TRIMMER, GAS Forklifts TRIC HYUNDAI HLF 30-5E 6000LB HUSQVARNA HEDGE TRIMMER, PLATE 35-3900# 22 T (6) PALMER TILE STRIPPER, GAS GAS ELEC-TRIC Core Drills Pressure Washer/ After HLF 5625-5 Years the FIELD New Orleans Area J-R Equipment Rental Corp has(2)commissioned (3) DR MOWER, & BRUSH HYUNDAI 5000LBof GASserving EDCO PLANER, CONCRETE DIAMOND PRODUCTS DRILL, Sprayersfor a more detailed list visit BILLY GOAT MOWER, FIELD these & CORE items at Public Auction. TCM FORKLIFT, FD40 9000LB Weeks Auction Company, LLC to sell (4) BE PRESSURE WASHER, Stump Grinders BRUSH DSL (2) HILTI DRILL, CORE www.weeksauction.com or call 352-804-3981 (5) DOSKOCIL STUMP GRINDER, CLASSEN MOWER, FIELD & (2) BLACK & DECKER DRILL, 2500 PSI (5) TCM FCG25 5000LB GAS BE PRESSURE WASHER, 4000 MDL 337 BRUSH (3) TCM FG15 3000LB GAS MAG-NETIC 1-1/4” CHUCK PSI LAWN ROLLER Online Bidding Available at Scissor Lifts Generators TROYBILT POWER SPRAYER (2) JLG 1930 SCISSOR LIFT, 19’ (2) CLASSEN SOD CUTTER, 18” Concrete Breakers GENERATOR, 4000 WATT JLG 2630 SCISSOR LIFT, 26’ Pumps Partial Listing TOKU BREAKER, PAVING 60LB Air Compressors Concrete Saws/ KOSHIN PUMP, TRASH 3” (2) APT BREAKER, PAVING 60LB (3) KOSHIN TRASH PUMP, 2” Trucks/Trailers Towable (7) APT BREAKER, PAVING 90LB Grinders 2006 FREIGHTLINER FL- TILT (10) AIRMAN PDS185 DIESEL MULTIQUIP TRASH PUMP, 2” (4) TOKU BREAKER, PAVING HUSQVARNA GRINDER, CONC. BED ELEC 1 DISC AIRMAN COMPRESSOR PDS390 90LB Saws 2012 FORD F350 FLAT BED (2) TARGET GRINDER, CONC. (3) HILTI SAW, CUT OFF GAS Light Towers Tow- HILTI BREAKER-PAVING 60LB 2005 CEHVY 1500 UTILITY 14” MAKITA BREAKER-PAVING GAS, 2 DISC able HUSQVARNA SAW, CUT OFF SkidSteers 60LB Demoltition Ham- GAS 14” (10) TEREX RL4000 LIGHT JOHN DEERE 319E HILTI BREAKER-PAVING 60LB TOWER, KUBOTA DSL mers CRAIN SAW, JAMB 6-1/2” (2) BOBCAT S300 DSL Concrete GA Bug- (2) Checks APT HAMMER, DEMOLITION SAW, JAMB 6-1/2” & Conditions: Payment Cash or Cashier’s Check. All Wire Transfers, Personal and Company must have a bank letter CRAIN of Reference. Unless prior arrang(2)Terms BOBCAT T250 TRACK Wheel Loader ments have been made. All Checks must be payable to Weeks Auction Co., LLC. No bank drafts will be30LB accepted. gies MAKITA SAW, RECIPROCATING LOADER DYNAMIC SWINGER 220 Tax: AllT140 Purchases are subject to LA sales tax unless you have a sales tax exemption. A sales(4) tax TOKU certificate must be DEMOLIexecuted on sale day; failure to provide a cerHAMMER, (4) WHITEMAN BUGGY, 16CF (2)Sales BOBCAT TRACK SAW, RECIPROCATING tificate will require the peyment ofLOADER sales tax on all purchases. Municipal Consignors have the right to remove any piece from sale. TION 30LB LOADER (2) STONE BUGGY 16CF Tile/Brick EquipA 10% Buyers Premium will be charged on each item, in addition to the internet buyers A 2.5%ROTARY INTERNET BUYERS FEE capped at Trenchers BOSCHpremium. HAMMER, (2)Buyers BOBCATPremium: S130 SKIDSTEER Concrete Finsihing 11224 $750.00 Per Item will be charged BOBCAT on all internet MT52purchases. TRENCHER ment & Saws BUCKETS (2) DITCH WITCH TRENCHER, (2) WHITEMAN TROWEL 36” (2) HILTI HAMMER, ROTARY HUSQVARNA BRIKSAW, 14” GRAPPLES (3) WHITEMAN TROWEL 48” DITCH-WITCH 6X30” 11232 ELEC FORKS BULL FLOAT BOSCH HAMMER-CHIPPING/ (2) FELKER SAW, TILE 8/10” (2) EZ TRENCH, 3” TIRES & WHEELS MULTIQUIP VIBRATOR 2 HP BOSCH FELKER SAW, TILE SM10150 BROOMS Welders (4) HILTI HAMMER-DEMO/ MULTIQUIP SAW,FLOOR/SLAB ELEC LINCOLN WELDER, 250 AMP, Mini Excavators 11HP/13HP C o n c r e t e / M o r t a t BOSCH DIE-SEL TOWABLE JOHN DEERE 17G STANLEY HYDRAULIC HAMMER MULTIQUIP SAW,FLOOR/SLAB (2) MULTIQUIP WELDER, POR- Mixer JOHN DEERE 17E F/323 11HP/13HP TABLE BOBCAT 341 STONE MIXER, CONCRETE 6CF (2) APT ROCK DRILL, 37LB DIAMOND SAW,FLOOR/SLAB GENERATORS BOBCAT 334 (3) WHITEMAN MORTAR 9 CF 11HP/13HP (3) APT ROCK DRILL, 55LB GENERATOR, 4000 WATT BOBCAT 323 FELKER TILE ROLLER, 100# Plate Compactors KUBOTA KX41-3V Log Splitters Turf Equipment (3) MIKASA COMPACTOR, (2) NORTHSTAR LOG SPLITTER, EDDY TILE STRIPPER, ELECSTIHL HEDGE TRIMMER, GAS Forklifts TRIC HYUNDAI HLF 30-5E 6000LB HUSQVARNA HEDGE TRIMMER, PLATE 35-3900# 22 T (6) PALMER TILE STRIPPER, GAS GAS ELEC-TRIC Core Drills Pressure Washer/ HYUNDAI HLF 25-5 5000LB GAS (3) DR MOWER, FIELD & BRUSH DIAMOND PRODUCTS DRILL, (2) EDCO PLANER, CONCRETE Sprayers TCM FORKLIFT, FD40 9000LB BILLY GOAT MOWER, FIELD & CORE (4) BE PRESSURE WASHER, Stump Grinders BRUSH DSL (2) HILTI DRILL, CORE (5) DOSKOCIL STUMP GRINDER, CLASSEN MOWER, FIELD & (2) BLACK & DECKER DRILL, 2500 PSI (5) TCM FCG25 5000LB GAS BE PRESSURE WASHER, 4000 MDL 337 BRUSH (3) TCM FG15 3000LB GAS MAG-NETIC 1-1/4” CHUCK PSI LAWN ROLLER Scissor Lifts Generators TROYBILT POWER SPRAYER (2) JLG 1930 SCISSOR LIFT, 19’ (2) CLASSEN SOD CUTTER, 18” Concrete Breakers GENERATOR, 4000 WATT JLG 2630 SCISSOR LIFT, 26’ Pumps

WEEKS WEEKS AUCTION CO., INC

INDUSTRI

SAW, RECIPROCATING

IMPMAGAZINE.COM • AUGUST 16, 2018

Concrete Finsihing

ONLINE AUCTION ONLY COMPLETE LIQUIDATION OF

SATURDAY AUGUST 18, 2018 SATURDAY, AUGUST 18, 2018 2812 Jefferson Hwy.

2812 Jefferson Hwy.,LA. Jefferson, LA 70121 (METAIRIE) Jefferson 70121 (METAIRIE) Sale Time 9:00 A.M. Sale Time 9:00 a.m.CST CST 352-804-3981 352-804-3981

After 56 Years of serving the New Orleans Area, J-R Equipment Rental Corp has commissioned Weeks Auction Company, LLC to sell these items at Public Auction. For a more detailed list, visit www.weeksauction.com or call 352-804-3981

PLASTIC INJECTION MOLDING EQUIPMENT

Bidding Starts Aug. 27th Ending Aug. 30th, 2018 @ 10:00 AM 201 Ellis St., Stryker, OH 43557

Online Bidding Available at

Pre-View Dates: August 22nd, August 24th & August 27th – 10:00 AM to 2:00 PM

WWW.WEEKSAUCTION.COM WWW.WEEKSAUCTION.COM

DAY 1 LOCATION: 4490 S. GRANT STREET, GARY, IN 46408

WELDERS SUPPORT EQUIPMENT:

TRUCKS/TRAILERS

• 2006 FREIGHTLINER TILT Miller BED WELDER, 250 AMP, DIESEL • (2)FL-’12 Big• LINCOLN Blue 700 Welders • 2012 FORD F350 FLAT BED TOWABLE • (2) ’04 Miller 400D Welders • 2005 CHEVY 1500 UTILITY • (2) MULTIQUIP WELDERS, PORTABLE

VEHICLES:

18 FLATBED TRAILERS:

DEMOLITION HAMMERS

• (2) APT HAMMERS, DEMOLITION 30LB • 1980 up to 2006 42’ & 40’ Tandems • ’13 Ford Explorer 4x4 • (4) TOKU HAMMERS, DEMOLITION 30LB • BOSCH HAMMER, ROTARY• 11224 ’11 Chevrolet Equinox SKIDSTEERS • (3) ’10 Miller 304 ArcEQUIPMENT Welders TURF • (2) HILTI HAMMERS, ROTARY 11232 • (6) ’11& ‘12 Dodge Ram 1500 Pickups • JOHN DEERE 319E STIHL HEDGE TRIMMER, GAS • BOSCH HAMMER-CHIPPING • ’02 Miller 302P •Welder • (2) BOBCAT S300 DSL • HUSQVARNA HEDGE TRIMMER, GAS • (2) ’11 GMC 1500 Pickup • CHILLING TOWERS • FORKLIFTS • (4) HILTI HAMMERS-DEMO/ BOSCH (6) 2012 Magnum MTL3060K 6KW Light Towers • (2) BOBCAT T250•TRACK LOADERS • (3) DR MOWERS, FIELD & BRUSH • STANLEY HYDRAULIC HAMMER F/323 • TANKS • SCRUBBERS • (2) ’10 Dodge Ram 1500 Pickups • (2) BOBCAT T140•TRACK LOADERS (2) ’04 IR P185 •Air Compressors BILLY GOAT MOWER, FIELD & BRUSH • TCM FG35 • (2) APT ROCK DRILLS, 37LB • (2) BOBCAT S130 SKIDSTEERS •& HOPPER LOADERS HANDLING EQUIPMENT • CLASSEN MOWER, FIELD & BRUSH • (3) ’08 Ford F250 (2) ’08 & ’10 F150 Pickups • MATERIAL • (3) APT ROCK DRILLS, 55LB • (2) Cat GP25K, • BUCKETS • LAWN ROLLER • DUST COLLECTORS • AIR •COMPRESSORS LOG SPLITTERS Yale GLP 4000# • GRAPPLES • (2) CLASSEN SOD CUTTERS, 18” • (2) NORTHSTAR LOG SPLITTERS, 22 T • FORKS • BLENDERS • GRINDERS • (2) Crown RR5225-45 CONCRETE BREAKERS PRESSURE WASHER/ • TIRES & WHEELS• (15) 10’ to 55’ Offices • BAGGERS • MANIFOLDS • TOKU BREAKER, PAVING 60LB SPRAYERS • BROOMS • ’94 Lorian LRT450 45 Ton Rough Terrain • (2) APT BREAKERS, PAVING 60LB MINI EXCAVATORS • OVENS • CONTROLLERS • (4) BE PRESSURE WASHERS, 2500 PSI • (7) APT BREAKERS, PAVING 90LB • ’06PSITerex RT335-1 35 Ton Rough Terrain • JOHN DEERE 17G • JOHN DEERE 17E • BE PRESSURE WASHER, 4000 ’13 Kubota RTV1140CPX 4 Door • TAPPERS • TESTERS • (4) TOKU BREAKERS, PAVING 90LB • BOBCAT 341 • BOBCAT 334 • TROYBILT POWER SPRAYER • ’98 Terex RT230•30 Ton Rough Terrain • ’11 Kubota RTV1100EQUIPMENT 2 Door • HILTI BREAKER-PAVING 60LB BANDERS • & OTHER SUPPORT • BOBCAT 323 • KUBOTA KX41-3V • (5) 40’, (3) 10’, (3) 40’ Containers with Changing PUMPSRooms • MAKITA BREAKER-PAVING 60LB • ’11 Kubota RTV900XTWL 2 door FORKLIFTS • KOSHIN PUMP, TRASH 3”• Broderson RT300-2A 15 Ton Carry Deck TERMS: VISA OR M/C OR WIRE TRANSFER. 18% BUYER’S PREMIUM ADDED. • HILTI BREAKER-PAVING 60LB • HYUNDAI HLF 30-5E 6000LB GAS • (3) KOSHIN TRASH PUMPS, 2” CONCRETE GA BUGGIES • HYUNDAI HLF 25-5 5000LB GAS AUCTIONEERS: • MULTIQUIP TRASH PUMP, 2” • TCM FORKLIFT, FD40 9000LB DSL • (4) WHITEMAN BUGGY, 16CF Check our Website for Complete Listing Wayne M. Wilson CAI SAWS Brent J. Wilson CAI • (5) TCM FCG25 5000LB GAS • (2) STONE BUGGY 16CF • (3) HILTI SAWS, CUT OFF GAS 14” Fred Nott • (3) TCM FG15 3000LB GAS WILSON AUCTION & REALTY CO., LTD. CONCRETE FINISHING Bart Westfall Terms & Conditions: Payment Cash or Cashier’s Check. All Wire Transfers, Personal and Company Checks must•have a bank letter of Reference. Unless prior arrangHUSQVARNA SAW, CUT OFF GAS 14” SCISSOR LIFTS 825Vests N. Main St., Bryan, OH 43506 • (2) WHITEMAN TROWEL ments have been made. All Checks must be payable to Weeks Auction Co., LLC. No bank drafts will be accepted. Phil Stotz •areRigid 3 sales Speed Blower • Safety •36” Hoses • Nylon Slings • Pliers • CHAIN SAW,onJAMB 6-1/2” Sales Tax: All 1930 Purchases subject to LA19’ tax unless you have a sales tax exemption. A sales tax certificate must be executed sale day; failure to provide a cer• (2) JLG SCISSOR LIFTS, Rich Merillat (3) WHITEMAN 48”,to remove BULL FLOAT tificate will require the peyment of sales tax on all purchases. • Municipal ConsignorsTROWEL have the right any piece from sale. 419-636-5500 • Toll Free: 866-870-5500 • Bolt Bins • Disposable • Hoes Parts • Clamps Ryan Ruble (Apprentice • Ratchet Straps SAW, RECIPROCATING • JLGPremium: 2630 SCISSOR LIFT, Premium 26’ will be charged•onMULTIQUIP Buyers A 10% Buyers each item, in VIBRATOR addition to the2internet buyers premium. •AMAKITA 2.5% INTERNET BUYERS FEE capped at HP ELECTRIC

OFFICE TRAILERS:

10 VAN TRAILERS FORKLIFTS:

CRANES:

UTV’s:

CONTAINERS:

600+ LOTS OF MISCELLANEOUS:

• Pallet Jacks AIR COMPRESSORS-TOWABLE

$750.00 Per Item will be charged on all internet purchases.

• Boxes Spill Mats TILE/BRICK EQUIPMENT•&Torch SAWS Tips CONCRETE/MORTAR MIXER of Oil

www.WilsonAuctionLtd.com Auctioneer) • Leather & Driving Gloves • Work Benches

• (10) AIRMAN PDS185 DIESELS Step Ladders • HUSQVARNA BRIKSAW, 14” ELEC • Several • Tyvek Suits • Shovels • Welding Filter Plates • STONE MIXER, CONCRETE 6CF • Clevis • AIRMAN COMPRESSOR PDS390 • (2) FELKER SAWS, TILE 8/10”• Gloves CF • Floor Buffers • (3) WHITEMAN MORTAR•9Folding • Rain Suits Chairs LIGHT TOWERS TOWABLE • Shackles • FELKER SAW, TILE SM10150 RETIREMENT FOR STEAD ENTERPRISES PLATE COMPACTORS • Air Compressors • BUSINESS Rubber Waders • Safety Vests • Safety Gear • (10) TEREX RL4000 LIGHT TOWER • MULTIQUIP SAW, FLOOR/SLAB • Tie • (3) MIKASA COMPACTORS, PLATE SATURDAY, SEPTEMBER 8, Downs 2018 AT 10:00 AM • 100+ Sockets • Boxes of Rags • Zip Ties • KUBOTA DSL • Paint Supplies 11HP/13HP 35-3900# Commercial Auction in Ochre River, Manitoba, • Lifting Chains Canada WHEEL LOADER • Space Heaters CORE DRILLS • Pipe Stands • Chisels (3) Uni-Mac Industrial 60# • DIAMOND SAW,FLOOR/SLAB, • 11HP/13HP • DYNAMIC SWINGER 220 LOADER SHOP EQUIPMENT SEMI TRACTORS (Both units are safetied and good • Chain Hoists • Jack Hammers• DIAMOND PRODUCTS DRILL, • Tool Boxes • Hammers • FELKER TILE ROLLER, 100# Washing Machines CORE DIRECTIONS: • 20 Ton Shop Press running order and ready to hit the road) TRENCHERS Concrete Saws • EDDY TILE STRIPPER, ELECTRIC • Climbing Harness • AirSleeper, Refrigerant • Uni-Mac Industrial Dryer • (2) HILTI DRILL, CORE • Grinder Blades • 2011 Volvo Highway Tractor, Approx. Recovery • 12 Ton Pipe•Bender Just East of Ochre River, • BOBCAT MT52 TRENCHER • (6) PALMERCords TILE STRIPPERS, •ELECTRIC 400,000 Miles, 13 Speed,•D-13 , 500 HP Volvo Engine • Sheet Metal•Roller • (2) BLACK & DECKER DRILL, MAGNETICExtension Several Hydraulic Power Floor Jacks • Unused Minute 320 Walk Behind Rigid Stands • (2) DITCH WITCH•TRENCHERS MB on&OldDies Highway 5. • 2009 Volvo Highway Tractor, Approx. 400,000 Miles, • Engine Crane • (2) EDCO PLANERS, CONCRETE Floor Sweeper 1-1/4” CHUCK • DITCH-WITCH 6X30” Units • Miller 304 Arc Welders • Bandsaw Blades • Kerosene Heaters 13 Spd, D-16 Volvo Engine • Acklands Plasma Cutter • STUMP GRINDERS • Measuring Tapes • (2) EZ TRENCH, 3” • Several New & CONCRETE Used Air SAWS/ •GRINDERS • Welding Rods Angle Grinders • Salvaged Parts - 373 Ratio, 4 Wheel Rear Lock Up • Miller 180, 230 Volt Wire Feed WelderLifts on Cart • Material Handler • HUSQVARNA GRINDER, CONC. ELEC 1 DISC • (5) DOSKOCIL STUMP GRINDERS, GENERATORS from 1998 Volvo, New Brakes • Power Ease 4000 PSI Pressure Washer • Caulk Guns Conditioning Units • Air Impacts • Face Shields • GENERATOR, 4000 WATT • (2) TARGET GRINDERS, CONC. GAS, 2 DISC MDL 337 • Stake Side TRAILERS • Miller 250 AC/DC Heavy DutyBed WelderSides • Pipe Cleaners • Cabinets • Automotive Parts • Oil Pump/Tank • Abrasive Bits • 2005 53’ Tri-Axle, Step Deck, c/w Metal Sides, • Drill Presses For Terms, Conditions, Sales Tax, Buyers Premiums and More Detail, Visit www.weeksauction.com Ramp Tail Gate, Safetied• Filters • EconoHorse Pressure Washer (as-is) • Couplers • 100’s of New Shop Supplies • Slag Hammers Crane Parts • 2012 53’ Tri-Axle Step Deck, MetalCompactors Sides, Ramp • Radial Arm •Saw • Battery Ends • Respiratory Masks • Plate • Assorted Hole Saws Tails Gate, Safetied • LeBlond Regal Metal Lathe c/w Taper Cut • Miller Matic 250 • New Rubber Pants • Padlocks Dollies • Drill Bits • 2011 Tri-Axle Step Deck,•53’ Sides go to 12’ Width, • Ducar 2500 Watt Generator All New Decking, Safetied • Larger (Approx 30 Gal.) Air Compressor, Needs Motor Mig Welder • Shirts • Gas Cans • Generators • Allen Wrenches • 45’ Semi Van Trailer (Not Safetied- Storage) • Electric Motors • Plus Hundreds More Items • Broom Heads • 2” & 3” Water Pumps • Unused Adjustable Wrenches • Bib Overalls• Quantity of Chains & Load Binders • 1 Ton Chain Hoist • Assorted Semi Tires • Miller Welder – as is • Assorted Tools, Not Yet Sorted Connecting Buyers and Sellers in the Metalworking Industry...Since 1951 OTHER ITEMS WHEEL LOADER • Approx 800’ New Vinyl Siding • Wheel Chair • 1998 Case 621B xt Wheel Loader, gc, c/w Bucket • Defiance Store Scale • Grapple Attachment for Wheel Loader CAMPER, BOAT, ETC. • 20.5x35 Loader Tire • 15’ LeoCraft Hard Bodied Bumper Hitch Camper YARD CARE Online bidding available at proxibid.com/dsa Trailer • Power Rake • MTD Snow Blower • 14’ Fiberglass Boat On Trailer • 6 Wheel Side Delivery Rake for Lawn Visit our website for terms and conditions • Yamaha 4 Wheel Golf Cart – As Is • Ryan Power Rake • Large Grass Vacuum • Gas Water Pump Auctioneer: Nic Smock •–3 Pontoons Lic. #AU10500037 CONTACT PROXY BIDDING MURRELL & NANCY HAUGERUD AVAILABLE AT at 204-733-2498 gartonsauction.com

AUCTION

Connecting Buyers and Sellers since 1951

Sale Site Phone: 888-841-7386

dsaauctions.com


After 56 Years of serving the New Orleans Area J-R Equipment Rental Corp has commissioned Weeks Auction Company, LLC to sell these items at Public Auction. for a more detailed list visit www.weeksauction.com or call 352-804-3981

S

INDUSTRIAL MARKET PLACE

A

NE AND RENTAL AUCTION ucti n ESDAY, AUGUST 29TH @ 9:00AM Online Bidding Available at

Partial Listing

Trucks/Trailers

2006 FREIGHTLINER FL- TILT BED 2012 FORD F350 FLAT BED 2005 CEHVY 1500 UTILITY

SkidSteers

JOHN DEERE 319E (2) BOBCAT S300 DSL (2) BOBCAT T250 TRACK LOADER (2) BOBCAT T140 TRACK LOADER (2) BOBCAT S130 SKIDSTEER BUCKETS GRAPPLES FORKS TIRES & WHEELS BROOMS

WWW.WEEKSAUCTION.COM

Air Compressors Towable (10) AIRMAN PDS185 DIESEL AIRMAN COMPRESSOR PDS390

Light Towers Towable

(10) TEREX RL4000 LIGHT TOWER, KUBOTA DSL

Wheel Loader

TOKU BREAKER, PAVING 60LB (2) APT BREAKER, PAVING 60LB (7) APT BREAKER, PAVING 90LB (4) TOKU BREAKER, PAVING 90LB HILTI BREAKER-PAVING 60LB MAKITA BREAKER-PAVING 60LB HILTI BREAKER-PAVING 60LB

Concrete GA Buggies

Concrete Grinders

Saws/

KOSHIN PUMP, TRASH 3” (3) KOSHIN TRASH PUMP, 2”

HUSQVARNA GRINDER, CONC. ELEC 1 DISC (2) TARGET GRINDER, CONC.

MULTIQUIP TRASH PUMP, 2”

GAS, 2 DISC

Demoltition Hammers

(2) APT HAMMER, DEMOLITION 30LB (4) TOKU HAMMER, DEMOLITION 30LB BOSCH HAMMER, ROTARY 11224 (2) HILTI HAMMER, ROTARY 11232 BOSCH HAMMER-CHIPPING/ BOSCH (4) HILTI HAMMER-DEMO/ BOSCH STANLEY HYDRAULIC HAMMER F/323 (2) APT ROCK DRILL, 37LB

Saws

(3) HILTI SAW, CUT OFF GAS 14” HUSQVARNA SAW, CUT OFF GAS 14” CRAIN SAW, JAMB 6-1/2” CRAIN SAW, JAMB 6-1/2” MAKITA SAW, RECIPROCATING

AL RENTSIMPMAGAZINE.COM • AUGUST 16, 2018 DYNAMIC LOADER

SWINGER

220

Trenchers

BOBCAT MT52 TRENCHER (2) DITCH WITCH TRENCHER, DITCH-WITCH 6X30” (2) EZ TRENCH, 3”

(4) WHITEMAN BUGGY, 16CF (2) STONE BUGGY 16CF

Concrete Finsihing

(2) WHITEMAN TROWEL 36” (3) WHITEMAN TROWEL 48” BULL FLOAT MULTIQUIP VIBRATOR 2 HP

SAW, RECIPROCATING

Tile/Brick Equipment & Saws

HUSQVARNA BRIKSAW, 14” ELEC (2) FELKER SAW, TILE 8/10” FELKER SAW, TILE SM10150 Welders ELEC MULTIQUIP SAW,FLOOR/SLAB LINCOLN WELDER, 250 AMP, Mini Excavators 11HP/13HP Concrete/Mortat DIE-SEL TOWABLE JOHN DEERE 17G MULTIQUIP SAW,FLOOR/SLAB (2) MULTIQUIP WELDER, POR- Mixer JOHN DEERE 17E 11HP/13HP TABLE BOBCAT 341 STONE MIXER, CONCRETE 6CF DIAMOND SAW,FLOOR/SLAB GENERATORS BOBCAT 334 (3) WHITEMAN MORTAR 9 CF 11HP/13HP (3) APT ROCK DRILL, 55LB GENERATOR, 4000 WATT BOBCAT 323 FELKER TILE ROLLER, 100# Plate Compactors KUBOTA KX41-3V Auctioneer Grady Weeks Lic. # AB-441 Log Splitters TurfLA.Equipment (3) MIKASA COMPACTOR, (2) NORTHSTAR LOG SPLITTER, EDDY TILE STRIPPER, ELEC4851 West Hwy.STIHL 40 Ocala, FL 34482 HEDGE TRIMMER, GAS Forklifts TRIC HYUNDAI HLF 30-5E 6000LB HUSQVARNA HEDGE TRIMMER, PLATE 35-3900# 22 T (6) PALMER TILE STRIPPER, GAS GAS ELEC-TRIC Core Drills Pressure Washer/ After HLF 5625-5 Years the FIELD New Orleans Area J-R Equipment Rental Corp has(2)commissioned (3) DR MOWER, & BRUSH HYUNDAI 5000LBof GASserving EDCO PLANER, CONCRETE DIAMOND PRODUCTS DRILL, Sprayersfor a more detailed list visit BILLY GOAT MOWER, FIELD these & CORE items at Public Auction. TCM FORKLIFT, FD40 9000LB Weeks Auction Company, LLC to sell (4) BE PRESSURE WASHER, Stump Grinders BRUSH DSL (2) HILTI DRILL, CORE www.weeksauction.com or call 352-804-3981 (5) DOSKOCIL STUMP GRINDER, CLASSEN MOWER, FIELD & (2) BLACK & DECKER DRILL, 2500 PSI (5) TCM FCG25 5000LB GAS BE PRESSURE WASHER, 4000 MDL 337 BRUSH (3) TCM FG15 3000LB GAS MAG-NETIC 1-1/4” CHUCK PSI LAWN ROLLER Online Bidding Available at Scissor Lifts Generators TROYBILT POWER SPRAYER (2) JLG 1930 SCISSOR LIFT, 19’ (2) CLASSEN SOD CUTTER, 18” Concrete Breakers GENERATOR, 4000 WATT JLG 2630 SCISSOR LIFT, 26’ Pumps Partial Listing TOKU BREAKER, PAVING 60LB Air Compressors Concrete Saws/ KOSHIN PUMP, TRASH 3” (2) APT BREAKER, PAVING 60LB (3) KOSHIN TRASH PUMP, 2” Trucks/Trailers Towable (7) APT BREAKER, PAVING 90LB Grinders 2006 FREIGHTLINER FL- TILT (10) AIRMAN PDS185 DIESEL MULTIQUIP TRASH PUMP, 2” (4) TOKU BREAKER, PAVING HUSQVARNA GRINDER, CONC. BED ELEC 1 DISC AIRMAN COMPRESSOR PDS390 90LB Saws 2012 FORD F350 FLAT BED (2) TARGET GRINDER, CONC. (3) HILTI SAW, CUT OFF GAS Light Towers Tow- HILTI BREAKER-PAVING 60LB 2005 CEHVY 1500 UTILITY 14” MAKITA BREAKER-PAVING GAS, 2 DISC able HUSQVARNA SAW, CUT OFF SkidSteers 60LB Demoltition Ham- GAS 14” (10) TEREX RL4000 LIGHT JOHN DEERE 319E HILTI BREAKER-PAVING 60LB TOWER, KUBOTA DSL mers CRAIN SAW, JAMB 6-1/2” (2) BOBCAT S300 DSL Concrete GA Bug- (2) Checks APT HAMMER, DEMOLITION SAW, JAMB 6-1/2” & Conditions: Payment Cash or Cashier’s Check. All Wire Transfers, Personal and Company must have a bank letter CRAIN of Reference. Unless prior arrang(2)Terms BOBCAT T250 TRACK Wheel Loader ments have been made. All Checks must be payable to Weeks Auction Co., LLC. No bank drafts will be30LB accepted. gies MAKITA SAW, RECIPROCATING LOADER DYNAMIC SWINGER 220 Tax: AllT140 Purchases are subject to LA sales tax unless you have a sales tax exemption. A sales(4) tax TOKU certificate must be DEMOLIexecuted on sale day; failure to provide a cerHAMMER, (4) WHITEMAN BUGGY, 16CF (2)Sales BOBCAT TRACK SAW, RECIPROCATING tificate will require the peyment ofLOADER sales tax on all purchases. Municipal Consignors have the right to remove any piece from sale. TION 30LB LOADER (2) STONE BUGGY 16CF Tile/Brick EquipA 10% Buyers Premium will be charged on each item, in addition to the internet buyers A 2.5%ROTARY INTERNET BUYERS FEE capped at Trenchers BOSCHpremium. HAMMER, (2)Buyers BOBCATPremium: S130 SKIDSTEER Concrete Finsihing 11224 $750.00 Per Item will be charged BOBCAT on all internet MT52purchases. TRENCHER ment & Saws BUCKETS (2) DITCH WITCH TRENCHER, (2) WHITEMAN TROWEL 36” (2) HILTI HAMMER, ROTARY HUSQVARNA BRIKSAW, 14” GRAPPLES (3) WHITEMAN TROWEL 48” DITCH-WITCH 6X30” 11232 ELEC FORKS BULL FLOAT BOSCH HAMMER-CHIPPING/ (2) FELKER SAW, TILE 8/10” (2) EZ TRENCH, 3” TIRES & WHEELS MULTIQUIP VIBRATOR 2 HP BOSCH FELKER SAW, TILE SM10150 BROOMS Welders (4) HILTI HAMMER-DEMO/ MULTIQUIP SAW,FLOOR/SLAB ELEC LINCOLN WELDER, 250 AMP, Mini Excavators 11HP/13HP C o n c r e t e / M o r t a t BOSCH DIE-SEL TOWABLE JOHN DEERE 17G STANLEY HYDRAULIC HAMMER MULTIQUIP SAW,FLOOR/SLAB (2) MULTIQUIP WELDER, POR- Mixer JOHN DEERE 17E F/323 11HP/13HP TABLE BOBCAT 341 STONE MIXER, CONCRETE 6CF (2) APT ROCK DRILL, 37LB DIAMOND SAW,FLOOR/SLAB GENERATORS BOBCAT 334 (3) WHITEMAN MORTAR 9 CF 11HP/13HP (3) APT ROCK DRILL, 55LB GENERATOR, 4000 WATT BOBCAT 323 FELKER TILE ROLLER, 100# Plate Compactors KUBOTA KX41-3V Log Splitters Turf Equipment (3) MIKASA COMPACTOR, (2) NORTHSTAR LOG SPLITTER, EDDY TILE STRIPPER, ELECSTIHL HEDGE TRIMMER, GAS Forklifts TRIC HYUNDAI HLF 30-5E 6000LB HUSQVARNA HEDGE TRIMMER, PLATE 35-3900# 22 T (6) PALMER TILE STRIPPER, GAS GAS ELEC-TRIC Core Drills Pressure Washer/ HYUNDAI HLF 25-5 5000LB GAS (3) DR MOWER, FIELD & BRUSH DIAMOND PRODUCTS DRILL, (2) EDCO PLANER, CONCRETE Sprayers TCM FORKLIFT, FD40 9000LB BILLY GOAT MOWER, FIELD & CORE (4) BE PRESSURE WASHER, Stump Grinders BRUSH DSL (2) HILTI DRILL, CORE (5) DOSKOCIL STUMP GRINDER, CLASSEN MOWER, FIELD & (2) BLACK & DECKER DRILL, 2500 PSI (5) TCM FCG25 5000LB GAS BE PRESSURE WASHER, 4000 MDL 337 BRUSH (3) TCM FG15 3000LB GAS MAG-NETIC 1-1/4” CHUCK PSI LAWN ROLLER Scissor Lifts Generators TROYBILT POWER SPRAYER (2) JLG 1930 SCISSOR LIFT, 19’ (2) CLASSEN SOD CUTTER, 18” Concrete Breakers GENERATOR, 4000 WATT JLG 2630 SCISSOR LIFT, 26’ Pumps

WEEKS WEEKS AUCTION CO., INC

ONLINE AUCTION ONLY COMPLETE LIQUIDATION OF

SATURDAY AUGUST 18, 2018 SATURDAY, AUGUST 18, 2018 2812 Jefferson Hwy.

2812 Jefferson Hwy.,LA. Jefferson, LA 70121 (METAIRIE) Jefferson 70121 (METAIRIE) Sale Time 9:00 A.M. Sale Time 9:00 a.m.CST CST 352-804-3981 352-804-3981

After 56 Years of serving the New Orleans Area, J-R Equipment Rental Corp has commissioned Weeks Auction Company, LLC to sell these items at Public Auction. For a more detailed list, visit www.weeksauction.com or call 352-804-3981

PLASTIC INJECTION MOLDING EQUIPMENT

Bidding Starts Aug. 27th Ending Aug. 30th, 2018 @ 10:00 AM

Online Bidding Available at

WWW.WEEKSAUCTION.COM WWW.WEEKSAUCTION.COM

201 Ellis St., Stryker, OH 43557

Pre-View Dates: August 22nd, August 24th & August 27th – 10:00 AM to 2:00 PM

DAY 2 LOCATION: 4860 W 47TH AVE., GARY, IN 46408 ROUGH TERRAINWELDERS CRANES:

TRUCKS/TRAILERS

• 2006 FREIGHTLINER FL- TILT BED 65 Ton • LINCOLN WELDER, 250 AMP, DIESEL • (3) ’06 Terex RT665 • 2012 FORD F350 FLAT BED TOWABLE • ’99 Terex RT160 60 Ton • 2005 CHEVY 1500 UTILITY • (2) MULTIQUIP WELDERS, PORTABLE

• (3) Terex RT555 55 Ton TURF EQUIPMENT SKIDSTEERS

DUMP TRUCKS:

70- PICKUP TRUCKS:

DEMOLITION HAMMERS

• (2) APT HAMMERS, DEMOLITION 30LB CT713 Tri Axle, 150,000 Miles • Variety of Regular Cabs and Crew Cab • ’04 & ’07 Mack Granite • (4) TOKU HAMMERS, DEMOLITION 30LB • ’11 & ‘12 Dodge Ram 2500 • BOSCH HAMMER, ROTARY 11224 • ’07 Chevrolet 2500 • (2) HILTI HAMMERS, 11232 • ’13 Ford F350 • ’14 Talbert ROTARY 55 Ton, Tri Axle, • BOSCH • (15) ’09, ’11, 12, & ’13 Ford F150 • ’00HAMMER-CHIPPING Talbert 55 ton Tri Axle • CHILLING TOWERS FORKLIFTS • (4) HILTI HAMMERS-DEMO/ BOSCH • 14) ‘08’10,• (4) ’11,& ’13 Chevrolet 1500 • ’88 Fabco 50 Ton Tri Axle • STANLEY HYDRAULIC HAMMER F/323 • TANKS • • (27) ’06, ’09,SCRUBBERS ’10, ’11, ’12 & ‘13 Dodge 1500 • ’80 Trailmobile Drop Deck 55 ton • (2) APT ROCK DRILLS, 37LB • (6) ’10, ‘11• &MATERIAL ’12 GMC Sierra 1500 • HOPPER LOADERS HANDLING EQUIPMENT • ’97 Landoll axle • (3) APT ROCK DRILLS,35 55LBTon Sliding tandem

LOWBOYS:

• JOHN DEERE’00 319E-’08 Terex RT335 • (12) 35 Ton • STIHL HEDGE TRIMMER, GAS • (2)•BOBCAT S300 DSL RT230 30 Ton • HUSQVARNA HEDGE TRIMMER, GAS (2) ’08 Terex • (2) BOBCAT T250 TRACK LOADERS • (3) DR MOWERS, FIELD & BRUSH • (2) BOBCAT T140 TRACK LOADERS • BILLY GOAT MOWER, FIELD & BRUSH • (2) BOBCAT S130 SKIDSTEERS • CLASSEN MOWER, FIELD & BRUSH • BUCKETS • ’07 Shuttlelift 7755 22 Ton, Terex • LAWN ROLLER5540F • DUST COLLECTORS • AIR COMPRESSORS LOG SPLITTERS • GRAPPLES • (2) CLASSEN SOD CUTTERS, 18” • (2) ’08 Broderson IC200-EF 15 Ton • (2) NORTHSTAR LOG SPLITTERS, 22 T • FORKS • BLENDERS • GRINDERS CONCRETE BREAKERS • Broderson IC-200D 15 Ton PRESSURE WASHER/ • TIRES & WHEELS • ’98 Ti-Brook aluminum 24’ (10) ’06 - ’12 E350 • BAGGERS • Ford MANIFOLDS • TOKU BREAKER, PAVING 60LB SPRAYERS • BROOMS • ’97 Broderson RT300-2B 15 Ton • ’97 City Cobra 30’ Frameless • (2) APT BREAKERS, PAVING 60LB MINI• ’03 EXCAVATORS • OVENS • CONTROLLERS • (4) BE PRESSURE WASHERS, 2500 PSI Broderson IC80-3F •8.5 Ton • ’91 Fruehauf 24’ Frameless, Galbreath 22’ (7) APT BREAKERS, PAVING 90LB • JOHN DEERE 17G • JOHN DEERE 17E • BE PRESSURE WASHER, 4000 PSI • TAPPERS • TESTERS Frameless • (4) TOKU BREAKERS, PAVING 90LB • BOBCAT 341 • BOBCAT 334 • TROYBILT POWER SPRAYER • ’08 GMC 17’ • HILTI BREAKER-PAVING 60LB • BANDERS • &Cube OTHER SUPPORT EQUIPMENT • (7) STRETCH • BOBCAT 323 • KUBOTA KX41-3V PUMPS • ’12 Ford Transit • MAKITA BREAKER-PAVING 60LB FORKLIFTS • KOSHIN PUMP, TRASH 3” • ’12 Genie GTH1056 Telescopic TERMS: VISA OR M/C• (2) OR ’13 WIRE TRANSFER. PREMIUM ADDED. Ford E250, ’08 18% GMCBUYER’S E350 • HILTI BREAKER-PAVING 60LB • HYUNDAI HLF 30-5E 6000LB GAS • (3) KOSHIN TRASH PUMPS, 2” • ’08HLF Skytrak 10054 CONCRETE GA BUGGIES • HYUNDAI 25-5 5000LB GAS Telescopic • ’04 Chevrolet 2500 AUCTIONEERS: • ’75 Transcraft to ’08 Fontaine • MULTIQUIP TRASH PUMP, 2” • TCM FORKLIFT, FD40 9000LB DSL • (4) WHITEMAN BUGGY, 16CF Check our Website for Complete Listing Wayne M. Wilson CAI SAWS Brent J. Wilson CAI • (5) TCM FCG25 5000LB GAS • (2) STONE BUGGY 16CF • (3) HILTI SAWS, CUT OFF GAS 14” Fred Nott • (3) TCM FG15 3000LB GAS WILSON AUCTION & REALTY CO., LTD. CONCRETE FINISHING Bart Westfall Terms &•Conditions: Payment Cash or Cashier’s Check. All Wire Transfers, Personal and Company Checks must have a bank letter of Reference. Unless prior arrang• HUSQVARNA SAW, CUT OFF GAS 14” (2) ’07 Genie RT Z60/34 Boom under 500 hours SCISSOR LIFTS N. Main St., Bryan, OH 43506 • (2) WHITEMAN TROWEL 36” ments have been made. All Checks must be payable to Weeks Auction Co., LLC. No bank drafts will be accepted. •825 (6) ’00 Freightliner Thomas Phil Stotz •be’07 Sterling LT9500 Tri Axle • CHAIN SAW, JAMB 6-1/2” Sales Tax: All 1930 Purchases are subject to Boom LA19’ sales tax unless you have a sales tax exemption. A sales tax certificate must executed on sale day; failure to provide a cer• (2) SCISSOR LIFTS, •JLG Genie Z45/25 Rich Merillat (3) WHITEMAN 48”,to remove BULL FLOAT tificate will require the peyment of sales tax on all purchases. • Municipal ConsignorsTROWEL have the right any piece from sale. • ’01 International Amtran 419-636-5500 • Toll Free: 866-870-5500 • (3) ’04, ‘06 & ’07 International 4300 25’ Ryan Ruble (Apprentice SAW, RECIPROCATING • JLGPremium: SCISSOR LIFT, Premium 26’ Boom Buyers A 10% Buyers will be charged•onMULTIQUIP each item, in VIBRATOR addition to the2internet buyers premium. •AMAKITA 2.5% INTERNET BUYERS FEE capped at •2630 Genie Z34/22 HP ELECTRIC

CARRY DECK CRANE:

15 PASSENGER VANS:

DUMP TRAILERS:

FORKLIFTS:

CARGO VANS:

(7) STRETCH FLATBED TRAILERS:

AERIAL LIFTS:

BUSES:

FLATBED TRUCKS:

AIR•COMPRESSORS-TOWABLE CONCRETE/MORTAR MIXER (2) JLG 2630ES Scissors

$750.00 Per Item will be charged on all internet purchases.

www.WilsonAuctionLtd.com

• ’07 International TILE/BRICK EQUIPMENT &4400 SAWS10 Ton

WELDERS:

Auctioneer)

• HUSQVARNA BRIKSAW, 14” ELEC • ‘13 GMC Sierra 3500 • (2) FELKER SAWS,F350 TILE 8/10” • ‘11 Ford 12’ • (7) Miller Big Blue 700 LIGHT TOWERS TOWABLE • FELKER TILEF350 SM10150 BUSINESS RETIREMENT FOR STEAD ENTERPRISES PLATE COMPACTORS • ’08 SAW, Ford • (3) ’06 Miller 600 • (10) TEREX RL4000 LIGHT TOWER • MULTIQUIP SAW, FLOOR/SLAB • (3) MIKASA COMPACTORS, PLATE SEPTEMBER 8, 2018 AT 10:00 AM • (2) ’06 Chevrolet 3500 •SATURDAY, (4) Miller 400D • KUBOTA DSL 11HP/13HP Commercial Auction in Ochre River, Manitoba, Canada • Linkbelt WHEEL LOADER210LX, 24”, 48” 35-3900# • ’05 GMC 3500 11HP/13HP • DIAMOND SAW,FLOOR/SLAB, CORE DRILLS • DYNAMIC 220 LOADER2500# Hammer, 4-in-1 Bucket SHOP EQUIPMENT SEMI TRACTORS (Both units are safetied and good • ’10 SWINGER Atlas Copco • FELKER TILE ROLLER, 100# • DIAMOND PRODUCTS DRILL, CORE DIRECTIONS: • 20 Ton Shop Press running order and ready to hit the road) TRENCHERS • EDDY TILE STRIPPER, ELECTRIC • (2) HILTI DRILL, CORE • ’06 Approx. IR 1300 • 2011 Volvo Highway Tractor, Sleeper, • 12 Ton Pipe Bender Just East of Ochre River, • BOBCAT MT52 TRENCHER PALMER STRIPPERS, ELECTRIC 400,000 Miles, 13 Speed, D-13•, 500 Engine XP375 • Sheet Metal Roller • (2) BLACK & DECKER DRILL, MAGNETIC • (6) ’11HP IRVolvo Doosan • (2) DITCH WITCH TRENCHERS MB on Old Highway 5. • (3) ’08 TILE & ‘11 Ford F350 c/w Welders, Air Compressors • 2009 Volvo Highway Tractor, Approx. 400,000 Miles, • Engine Crane • (2) EDCO PLANERS, CONCRETE CHUCK 211K Miles • DITCH-WITCH 6X30” Star 4964EX1-1/4” • (4) IR 185 • ’09 Western Tri Axle, 13 Spd, D-16 Volvo Engine • Acklands Plasma Cutter CONCRETE SAWS/ GRINDERS • STUMP GRINDERS • (2)•EZ’07 TRENCH, 3” Sterling AT9513 Tri Axle • Salvaged Parts - 373 Ratio, 4 Wheel Rear Lock Up • Miller 180, 230 Volt Wire Feed Welder on Cart • HUSQVARNA GRINDER, CONC. ELEC 1 DISC • (5) DOSKOCIL STUMP GRINDERS, GENERATORS from 1998 Volvo, New Brakes • Power Ease 4000 PSI Pressure Washer • ’98 Western Star Tri Axle • GENERATOR, 4000 WATT • (2) TARGET GRINDERS, CONC. GAS, 2 DISC MDL 337Ford F550, 45’ Reach • ’07 TRAILERS • Miller 250 AC/DC Heavy Duty Welder • ’07 Sterling AT9500 Tandem • 2005 53’ Tri-Axle, Step Deck, c/w Metal Sides, Pump/Tank • (12) ’12 Magnum• Oil MTL3060K For Terms, Conditions, Sales Tax, Buyers Premiums and More Detail, Visit www.weeksauction.com Ramp Tail Gate, Safetied • EconoHorse Pressure Washer (as-is) • ’07 IHC Navistar, Tandem • 2012 53’ Tri-Axle Step Deck, Metal Sides, Ramp • Radial Arm Saw • ’06 Sterling 9513 Tandem Tails Gate, Safetied • LeBlond Regal Metal Lathe c/w Taper Cut • ’05 Ford F750XL, 2,000 Gallon • ’08 Capacity TJ5000 Spotter • 2011 Tri-Axle Step Deck, 53’ Sides go to 12’ Width, • Ducar 2500 Watt Generator • ’09 Magnum 125KW All New Decking, Safetied • Larger (Approx 30 Gal.) Air Compressor, Needs Motor • ’07 IHC 4300 Tow Truck • ’13Storage) Wacker G120 • 45’ Semi Van Trailer (Not Safetied• Electric Motors • ’05 IHC 8600 Toter Quantity of Chains & Load Binders • Olympia 85KW • 1 Ton Chain Hoist • (5) ’14 Dodge Ram 2500 less •than 40,000 Miles • Assorted Semi Tires • Miller Welder – as is • Assorted Tools, Not Yet Sorted Connecting Buyers and Sellers in the Metalworking Industry...Since 1951 OTHER ITEMS WHEEL LOADER • Approx 800’ New Vinyl Siding • Wheel Chair • 1998 Case 621B xt Wheel Loader, gc, c/w Bucket • Defiance Store Scale • Grapple Attachment for Wheel Loader CAMPER, BOAT, ETC. • 20.5x35 Loader Tire • 15’ LeoCraft Hard Bodied Bumper Hitch Camper YARD CARE Trailer • Power Rake • MTD Snow Blower Online bidding available at proxibid.com/dsa • 14’ Fiberglass Boat On Trailer • 6 Wheel Side Delivery Rake for Lawn Visit our website for terms and conditions • Yamaha 4 Wheel Golf Cart – As Is • Ryan Power Rake • Large Grass Vacuum • 3 Pontoons • Gas Water Pump Auctioneer: Nic Smock – Lic. #AU10500037 CONTACT PROXY BIDDING MURRELL & NANCY HAUGERUD AVAILABLE AT at 204-733-2498 gartonsauction.com • (10) AIRMAN PDS185 DIESELS • STONE MIXER, CONCRETE 6CF • Genie GS3268 RT Scissor • AIRMAN COMPRESSOR PDS390 • (3) WHITEMAN MORTAR 9 CF

AUCTION

EXCAVATORS:

TRUCK TRACTORS:

4-MECHANIC TRUCKS: BUCKET TRUCK: WATER TRUCK

AIR COMPRESSORS: LIGHT TOWERS: GENERATORS:

w/STAKES TRUCK: Connecting Buyers and SellersFLATBED since 1951 Sale Site Phone: 888-841-7386

dsaauctions.com


8

August 16, 2018

FOR SALE

CURRENT & PAST ISSUES - VISIT IMPMAGAZINE.COM

INTERNET DIRECTORY Alloys & Components, Southwest www.alloysandcomponents.com Metric Hydraulic Cylinder Tubes & Rods Up To

H&K Equipment, Inc. www.hkequipment.com We Sell, Lease, Rent & Service Forklifts, Lift

Lazco Corp. www.lazcocorp.com Our Core Business Is Buying & Selling New, Surplus & Used HVACR Equipment, Parts

200mm, Cut-To-Length - No Minimum Order -

Trucks & Other Material Handling Equipment

& Compressors In The Global Air Conditioning

Same Day Ship

Hi-Heat Co. www.hi-heat.com

Markets

American Breakers www.americanbreakersca.com Dealer & Distributor of Circuit Breakers Atek Corporation www.atekcorporation.com Leading Provider Of Low Cost, High Quality Small Press Brakes Atlas Electric, Inc. www.atlaselectricinc.com Since 1987, We Have Been Providing Our Customers With Quality New, Used, Surplus & Rebuilt Electrical Equipment. We Carry A Large Inventory Of Circuit Breakers, Motors, Motor Controls, Switchgear & Transformers. In Addition, We Can Provide Custom Engineering, Manufacturing & Fabrication Of New Switchgear & Substations For All Industrial, Mining & Tunneling Applications Bearing & Drive Systems www.bdsbearing.com Buyers of Excess Bearing Inventory Bentec, Div. of Kiffer Industries, Inc. www.bentecbenders.com Providing Bentec Hydraulic Bending Machines, Which Provide Maximum Versatility At An Affordable Price. Each Bentec Bending Machine Is Designed & Built In Cleveland, Ohio Bidspotter, Inc. www.bidspotter.com World Leader In Live Interactive Auction Broadcasts. Created By Auctioneers For Auctioneers Burr King www.burrking.com Manufacturer of Abrasives, Belt Grinders & Polishing Machines Carnie Cap www.carniecap.com Providing The Most Effective Way To Cap Exposed

Buyers & Sellers of Ovens, Furnaces & Furnace Replacement Parts Innovative Rack & Gear www.gearacks.com Over 50 Combined Years of Gear and Gear Rack Experience Allows Us to be Your Quality Source Gears And Hard-Cut And Soft-Cut Gear Racks. We service The Oil, Defense, Steel, Marine, Automation, Machine Tool, Computer, Medical And Precision Instrument Industries Let Us Help You with Your Next Gear and Gear Rack Project

Lombard Metals www.lombardmetals.com Providing Used Provision Equipment MacMillin Hydraulic www.macmhydraulic.com Manufacturers of Pumps and Motor Mounts MB Industrial Equipment, Inc. www.mbequipment.com We Buy & Sell Electrical Equipment Including DC Motors, AC Motors, DC Crane Shoe Brakes,

Integrated Turbo Machinery, Inc.

DC Circuit Breakers, DC Contactors, DC Power

www.integratedturbo.com

Hoist Limit Switches

Integrated TurboMachinery Is A CriticalOperation Rotating Equipment Support

Melmor Associates www.melmor.com We Buy and Sell Used Material Handling

Technologies Provider. We Specialize In

Equipment

The Sale & Repair Of Steam Turbines,

MH Containers and Equipment Co., Inc.

Pumps, Compressors, Blowers & Gear Boxes.

www.mhcontainers.com

We Also Offer Upgrades, Field Services, Skid-

Supplying All Types of Containers – Steel

Packaging & Engineering Services

Containers, Wire Mesh Containers & Plastic

International Marketing Specialists

Containers

www.bondtech.net Designing, Engineering & Manufacturing All Types Of Autoclave Systems J&T Electrical Supply www.jtelectrical.com Providing Competitive Prices on Industrial, Commercial, and Residential Electrical Products Since 1982 Kanetec www.kanetec.com Manufacture of Magnetics Tools & Equipment Since 1959. Our Innovative Approach to Real World Problem Solving Makes us the Leader in Magnetic Tooling

Mullen Circle Brand www.nimco-controls.com Blender of Lubricants & Metalworking Fluids Oxarc www.oxarc.com Providing Welding & Industrial Supplies, As Well As Specialty Gases Since 1968. Also Offering Emergency Repair Facility For Welding-Related Products

PanaVise www.PanaVise.com Manufacturer of Precision Vises-Circuit Board Holders-Work Holding Tools-Mini

L&L Special Furnace Co., Inc.

Arbor Presses - Mobile Electric Mounts-

www.hotfurnace.com

GPS Units-Satellite Radio Receivers-Mobile

Manufacturer of Tool Room Furnace Model #GS1714; Features Include Easy Lift Door,

Video Screens - 2 Way Radios - Mobile Data Terminals. If It’s Mobile and Electronic, We

Program Control, Dimensions 17”W x 14”D x 12”H Can Handle It


FOR SALE

CURRENT & PAST ISSUES - VISIT IMPMAGAZINE.COM

August 16, 2018

9

FOR THE LATEST INFORMATION ABOUT OUR CURRENT ADVERTISERS’ PRODUCT OFFERINGS, CHECK OUT THEIR WEB SITE BELOW THE ADVERTISERS LISTED BELOW ARE LINKED ON THE INDUSTRIAL MARKET PLACE WEBSITE: WWW.IMPMAGAZINE.COM

Parker Boiler Co. www.parkerboiler.com Royal Products Parker Boiler Co. Is A World-Renowned

www.royalprod.com

Royal Products Is A Leading ISO-Registered

Manufacturer Of Steam Boilers From 1.5 HP to 150 Manufacturer Of Precision Metalworking HP With Pressures To 250 PSI. We Manufacture Direct-Fired Hot Water Boilers (Available As Gas, Oil, Propane or Combination-Fired) Ranging From 300,000 to 6,800,000 BTU, With Operating Temperatures To 400°F & Pressures To 300 PSI, Condensing Boilers 399,000 BTU to 5,433,000 BTU Up To 180° and 80 PSI. Our Indirect-Fired Water Heaters (Available As Gas Or PropaneFired) Range From 300,000 To 3,000,000

Products Is The Royal Filtermist – A Low-Cost,

Educational, Institutional And Industrial

Highly Efficient Mist & Smoke Collector Designed

Marketplace.

Specifically For The Metalworking Industry Salinger Electric Co., Inc. www.salingerelectric.com Buyers and Sellers of New and Remanufactured Electrical Equipment Schweiss Doors www.schweissdoors.com We Manufacture & Install Low-Maintenance

Bifold Liftstrap / Autolatch Doors, Both Of

Are The Makers of Low NOx Steam & Hot Water

Which Are Distributed Internationally. With Clean

Boilers & Burner Sytems

Aesthetics, Simple Installation & Smooth, Quiet

Park Thermal www.parkthermal.com

Operation, Our Strong Steel or Aluminum Frame

Manufacturers of New & Reconditioned

Architectural Engineered Designer Doors Accept

www.powellsystems.com Providing Quality Steel Containers For Over 70 Years. We Provide The Most Comprehensive Line Of Standard & Custom Corrugated Steel Containers For Any Application Proserv Anchor Crane Group www.proservcrane.com Manufacturer of Overhead Cranes & Hoists. Dedicated To Building The Precise Crane & Crane Infrastructure For Your Specific Needs Romac Supply www.romacsupply.com Buyers, Sellers & Renters Of Surplus Electrical Equipment Including Circuit Breakers, Transformers, Motor Controls, Motors, Bus Duct, Panelboards, Fuses and Substations. We Also Retrofit & Repair Electrical Equipment Row Electric Equipment www.rowelectrical.com

Most Cladding Systems; Glass, Polycarbonate, Wood, Steel, Etc., & Schweiss Hydraulic & Electrical Operated Bifold Doors Come With Many Safety Features & Upgrade Equipment. Finding The Right Custom Door For Any Application-Residential, Retail, Offices, Schools, Restaurants, Garage, Commercial, Industrial, Military, Hangars & More Is As Close As Your Telephone By Dialing 800-746-8273 Or By Visiting www.schweissdoors.com Scotchman Industries www.scotchman.com Scotchman Industries’ “Metal Fabricating Solutions” Features: Hydraulic Ironworkers, From 45 To 150 Ton Capacity With Numerous Tooling Options, Punches & Dies and Custom Tooling Available; Circular Cold Saws (Manual To Fully Automatic, Pivot For Ferrous & Non-Ferrous Materials) With A Complete Selection Of Blades & A Blade Sharpening Service; Band Saws; Full

STP Roto Machinery, Inc. www.stprotomachinery.com Manufacturing The Widest Range Of Machines For The Rotomolding Industry. Quality & Reliability Are Our Watchwords. Our Machines Are UserFriendly Sutton-Garten www.usedwelder.com Since 1918, Sutton-Garten Has Supplied the Finest in New, Used and Rental Welding and Cutting Equipment. All Machines Come with a Warranty and We Have a Great Selection of Miller and Lincoln Electrical and Engine Driven Welders and Hypertherm Plasma Cutting Equipment. Fume Collection Equipment is Also Available. T&R Electric Supply www.t-r.com “THE TRANSFORMER PEOPLE” - We Buy, Sell, Rent, Repair & Deliver Distribution & Substation Transformers As Well As Related High Voltage Switchgear Transducers USA www.tusainc.com Your Source For OEM Audio Components, Plaza Sounders, Speakers, Electro-Mechanical Devices, Electric Condenser Microphones, Pieza Ceramic Benders, Panel Mount Beepers And Buzzers Versa Machinery www.versamachinery.com Manufacturer Of High Quality Cutters & Pullers For The Rubber & Plastic Extrusion Industries Walton Co. www.waltontools.com Walton Company Manufactures Tools For The Automotive, Plumbing & Mechanical Industries, Including Tap Extractors, Tap Extensions & REPS Pipe, Stud & Screw Extractors

Line Of Pipe Notchers: Manual, Electric & Abrasive Weldship Corporation www.weldship.com Grinder/Notchers & Scotchman Manual Measuring

Buyers and Sellers of Compressed Gas Cylinders,

Systems & Programmable Feed & Stop Systems:

Tube Trailers, Cryogenic Storage Vessels

Quick, Easy, Accurate Length Setting & Feed

(The) W.H. Kay Company www.whkay.com

Buyers & Sellers Of Used Industrial Electrical Systems Manual To Fully Automatic For All Types Equipment

World Class HVAC Air Handling Systems And Specialty Fabrications For The Commercial,

Termperature Thermal Liquid Heaters. We Also

Powell Systems, Inc.

www.stcf.com

Performance Accessories. One Of Our Primary

BTU Input, With Operating Temperatures To 190°F Custom One-Piece Hydraulic Doors That Lift Up & Pressures To 150 PSI. We Manufacture High & Out To Form A Canopy When Open, & Patented

Industrial Furnaces & Heat Treat Equipment

Southerntier Custom Fabricators, Inc.

Of Machinery

Inventory Of Used Heat Treating Furnaces & Industrial Ovens


10

August 16, 2018

METAL FABRICATION BUSINESS LIQUIDATION AUCTION!! AUCTIONS

AUCTIONS

UP-TO-DATE AUCTION LISTINGS VISIT IMPMAGAZINE.COM

LIVE ONLINE AUCTION! DOUBLE B MANUFACTURING & REPAIR BRAD PRESLICKA ESTATE

WEDNESDAY, SEPTEMBER 12th • 9:00 A.M. 6666 58TH AVE S.E. • WILLMAR, MN 56201 INSPECTION DATE: TUESDAY, SEPTEMBER 4TH, • 10:00 A.M. - 3:00 P.M.

FORK LIFTS, WELDERS, IRON WORKER, METAL FABRICATION EQUIPMENT, TUBE AND FLAT STEEL, SHOP TOOLS AND SUPPLIES, ROAD GRADERS, ROCK LIFTS, TRAILERS, GROVE MACHINERY AND IRON AND MUCH MORE!!

TIMED ONLINE ONLY METAL FABRICATION & WELDING EQUIPMENT AUCTION!

TIMED ONLINE ONLY AUCTION! D & J WELDING & MFG OPENS: FRIDAY, SEPTEMBER 7th • 12:00 NOON

CLOSING: TUESDAY, SEPTEMBER 18TH • 10:00 A.M. US HWY 212 • DAWSON, MN 56232 INSPECTION DATE: THURSDAY, SEPTEMBER 13TH • 9:00 A.M.-12:00 P.M.

D&J 100 TON PRESS, 5' BED, VANNOR #30 VERTICAL/ HORIZONTAL MILLING MACHINE, HENDEY 12" X 30" TURNING LATHE, DREIS & KRUMP 1/4" X 8' METAL BRAKE, CINCINNATI 1/4" X 10'3" METAL SHEAR, MILLER WELDER, FLAT, ANGLE, TUBE, ROUND STEEL

FOR MORE INFORMATION:

(320) 365-4120

STAY CONNECTED WITH US VIA: FOR ONLINE TERMS, VISIT WWW.HENSLINAUCTIONS.COM

ARE YOU LOOKING FOR MACHINERY? Use Machinery Listing Services’ FREE LOCATING SERVICE

Call Toll-Free

(800) 3231818 or Visit Us On The Internet:

www. machinerylisting. com


AUCTIONS


ONLINE AUCTION SURPLUS TO THE ONGOING NEEDS OF GE OIL & GAS ONLINE SALE STARTS CLOSING AT: WEDS., AUGUST 22ND, 2018 • 12:00 P.M. EDT Inspection: Tuesday, August 21st, 2018 From 8:00 A.M. To 4:00 P.M. LOCATION: 5500 SE 59TH STREET, OKLAHOMA CITY, OK, 73135

CNC LATHES

• Hwacheon Mdl. Hi-Tech 400MC CNC Lathe / High Rigid & Productivity Horizontal Turning Center, Fanuc Series Oi-Td Controls, 10-Position Turret, Hydraulic Tailstock, 12” Diameter 3-Jaw Chuck, Mist Buster, Live Tooling [2013], S/N: M113361C4W • Hwacheon Mdl. Hi-Tech 400 CNC Lathe, Fanuc Series 18I-TB Controls, Turbo Systems Chip Conveyor, 4” Hole [2004], S/N: M1133552X3W-D • Controls, 10” Diameter 3-Jaw Power Chuck, 12-Position Turret, Hydraulic Tailstock, Chip Conveyor [2008], S/N: 202086 • Hwacheon Mdl. Mega-95 CNC Lathe, Fanuc Series 21-T Controls, Spindle Speeds 40-1000 RPM, 12-Position Turret, Hydraulic Tailstock, 18” Diameter 4-Jaw Chuck, 6” Hole, Turbo Chip Conveyor, Approximately 120” CC [2001], S/N: 30061 • (3) Hwacheon Mdl. Hi-ECO-35 CNC Turning Lathes, Fanuc 18-T Controls, Turbo Systems Chip Conveyor, 12” Diameter 3-Jaw Power Chuck, 10-Position Turret, Tailstock, Mist Buster S/N’s: M063348C4WA [2002], M063350A3-WA [2003], M063349A-4W • Doosan Mdl. Daewoo Lynx 220L CNC Lathe, Fanuc I Series Controls, MTA Type V-65E International Bar Feed (S/N: 6829), Digital, Mist Buster, Hennig Chip Conveyor [2006], S/N: L2201577 • (4) Hwacheon Mdl. Hi-Tech 200C CNC Lathes / High Rigid & Productivity Horizontal Turning Center, Fanuc Oi-T CNC Controls, Chip Conveyor, Mist Buster, 10” Diameter 3-Jaw Chuck, 10-Position Turret, S/N’s: M01735A3F-0 [2003], M017351E1FW, 1402010302 / S/N: M017351E1F-Y, M017351EFX • Hwacheon Mdl. Cutex 240 CNC Lathe, Fanuc Series Oi-Tb Controls, Chip Conveyor, 12-Position Turret, Tailstock, Mist Buster [2005], S/N: M027353G6LA

BROACHES

• Colonial Mdl. HAS25-724BS1 Broach, Large Quantity of Broaches, S/N: 162-22-0373 • Colonial Vertical Broach, Approximately 12” Stroke

PAINT BOOTH

• Paint Booth, Overall Size: 10’ X 10’ X 45’, Explosion Proof Lights, 40’ High, 500# Capacity [1995], S/N: 020806

CNC HORIZONTAL MACHINING CENTER

• Okk Mdl. HM4 CNC Horizontal Machining Center, Fanuc Series 21I-M Controls, Dual 16” X 16” Pallets, 60-Position Automatic Tool Changer, 40 Taper, Turbo Chip Conveyor, Type SF-3JX2D Thickner-Bag-Separator, 42-KVA, S/N: 178

LATHES

• Webb 20” X 80” Geared Head Engine Lathe, Spindle Speeds 28-1350 RPM, Newall DP-700 2-Axis Digital Readout, Taper Attachment, 6” Gap, S/N: 112-8112-09 • Birmingham Mdl. NSL 19” X 60” Geared Head Engine Lathe, 12” Diameter 3-Jaw Chuck, Taper Attachment, 6” Gap, Newall DP700 2-Axis Digital Readout [2000], S/N: 2481104 MILLING MACHINES • Mori Seiki Mdl. Mh-1500G 18” X 72” Geared Head Engine Lathe, Newall DP700 2-Axis Digital • Bridgeport Mdl. Series I Vertical Milling Machine, Newall 2-Axis Digital Readout, 9” X 42” Readout, 6” Gap, 12” Diameter 3-Jaw Chuck, Spindle Speeds 27-1265 Rpm, S/N: 3616 Power Feed Table, Spindle Speeds 60-4200 RPM, S/N: 207560 • Mori Seiki 20” X 60” Gap Type Geared Head Engine Lathe, 6” Gap, Newall 2-Axis Digital Readout, • Bridgeport Mdl. Series I Vertical Milling Machine, 9” X 42” Power Feed to Table, 2-Axis Digital 15” Diameter 3-Jaw Chuck, Spindle Speeds 28-1350 Rpm, Taper Attachment Readout, S/N: 232682 • Wasino Mdl. Leo 20” X 48” Geared Head Engine Lathe, Spindle Speeds 23-1800 RPM, 12” • Bridgeport Mdl. 2J Vertical Milling Machine, 9” X 42” Table, Spindle Speeds 60-4200 RPM, Diameter 3-Jaw Chuck, Newall 2-Axis Digital Readout, S/N: 4184 Power Feed to Table, Newall 2-Axis Digital Readout, S/N: 131616 • Leblond 18” X 48” Geared Head Engine Lathe, Spindle Speeds 40-1600 Rpm, 12” Diameter • Bridgeport Mdl. Series 1J Vertical Milling Machine, 9” X 42” Table, Power Feed, Mitutoyo 2-Axis 3-Jaw Chuck, Inch / Metric Threading, Taper Attachment, S/N: 11E617 Digital Readout, 1HP, S/N: 199681 • Enco Mdl. 111-1850 18” X 50” Geared Head Engine Lathe, Spindle Speeds 24-1600 RPM, • Alliant Vertical Milling Machine, 9” X 42” Power Feed Table, Spindle Speeds 60-4200 RPM, Newall Dp700 2-Axis Digital Readout, Steady Rest, 12” Diameter 3-Jaw Chuck, S/N: 2429 Newall 2-Axis Digital Readout • Sharp Mdl. 1880L Geared Head Engine Lathe, 40-2000 RPM Spindle Speeds, 12” Diameter 3-Jaw Chuck, S/N: 3911206 SAWS • Sharp Mdl. 1862S Geared Head Engine Lathe, 26-1500 RPM Spindle Speeds, Inch / Metric • Cosen Mdl. AH-320H Horizontal Bandsaw, 16” Wide, Exit Conveyor [2012], S/N: H1012392 Threading, 12” Diameter 3-Jaw Chuck, Approximately 4” Hole, Newall DP700 Digital Readout • Grob 18” Vertical Bandsaw, 24” X 24” Table • Sharp Mdl. 1862S Geared Head Engine Lathe, 26-1500 RPM Spindle Speeds, Inch / Metric Threading, 12” Diameter 3-Jaw Chuck, Approximately 4” Hole WASHERS & CLEANERS • Clean Products Inc. 27” Diameter Washer MISCELLANEOUS MACHINERY • Clean Products Inc. Mdl. Hd6033 Washer, S/N: 1305002940 • Schmidt Mdl. Styliner Mark 3 Stylus Marker, with PC • (3) Graymills Degreasers, 6-Amps, [1] 10-Amp, S/N’s: 272732; 191372; 272803 • Burr-King Mdl. Vibra King 200 Vibratory Finishing Mill, 13” Diameter Bowl • DoA-ll Hand Feed Surface Grinder, 4” X 7” Permanent Magnetic Chuck GEAR MACHINES • K.O. Lee Mdl. B300X Drill Point Grinder, S/N: 21200 • Barber Coleman Mdl. 43255 Gear Hob Sharpener, S/N: 433 • Sterling Drill Point Grinder, S/N: DG6607 • Barber Coleman Mdl. 14-15 Gear Hobber, S/N: 995 • Sunnen Mdl. Mbb625D Hone, S/N: 18137 • Barber Coleman Mdl. 43261Gear Hobber, S/N: 5104 • Wagon Caddy [3] Heavy Duty Lift Systems • Cart Caddy Mdl. 5W Lift System PRESS • Reliance 700HP Motor • Nugier 100 Ton Capacity Hydraulic Press, 48” Between Uprights, S/N: 0383018

MANLIFT

TREMENDOUS QUANTITY OF SHOP SUPPORT

CRANE SYSTEMS

TREMENDOUS QUANTITY OF OFFICE FURNITURE & EQUIPMENT

• Bobcat Model 863 Skid Steer Loader with Solid Tires, Bucket, Diesel Engine • JLG Mdl. 40 Electric Manlift, 40’ Max Platform Height, 20’6” Horizontal Reach, 500# Max Capacity [1995], S/N: 020806

• Large Quantity of Dayton Hydraulic Pallet Jacks, Built-In Digital Scale, Drills, Mills, Vises, Vidmar Cabinets, Carbide Inserts, 2-Door Steel Storage Cabinets, Live Tooling, Double End Pedestal Grinders, Engine Lifts, Etc.

• Spanco Free Standing Crane System, Overall Size: 100’ Long X 16’ Wide, 4000# R&M Loadmate • Executive Offices/Conference Tables & Chairs/Audio-Visual Equipment/Desks/Chairs/Partitioning/ File Cabinets/Credenzas/Tables/MUCH MUCH MORE LM10 Hoist • Spanco Free Standing Crane System, Approximately 24’ Wide X 100’, with R&M Loadmate FOR MORE INFORMATION & COMPLETE DETAILS, VISIT OUR WEBSITE [4] 1000# Electric Hoists, 12’ Span, R&M Loadmate 1000# Electric Hoist, 24’ Span * Note: This system is located in Shafter, California and Consists of: (2) Kone Cranes Single Girder, Overhead Cranes, 72’ Span, Columns & Rail with Overall Travel of Approximately 80’ • 6000# Capacity Portable A-Frame, with Budgit 3 Ton Electric Hoist • 2000# Capacity Portable A-Frame, with Dayton 1 Ton Electric Hoist

OVENS

• Grieve Mdl. AB550 Electric Oven, 11-Amps, 460V, 550˚ Max Temperature, Chart Recorder, S/N: 98564A1109 • Grieve Mdl. HB-500 2-Door Electric Oven, 500˚F Max Temperature, 9KW, S/N: 510389

40 Daniel Street • Farmingdale, NY 11735 Tel: 631-454-1766 • Fax: 631-454-1779 email: info@kosterindustries.com www.kosterindustries.com

Under Management Of: GE Capital Jim Hanley, Equipment Remarketing Services 83 Wooster Heights Rd., Danbury, CT 06810 P: 203-546-4491 • E: jim.hanley@ge.com


The WEBB Corporation offers a large selection of standardized and customized turning rolls, plate rolls, track supports, fit-up fixtures, seam welders and positioners, offset joggles, mast and boom fixtures and other equipment. Standardization saves you considerable money over having a machine custom built. Plus with our customized options, you can order equipment built to suit your requirements.

MFG 1-23-15

3-Roll Bending Rolls

Track Support

Heavy Duty Turning Portable Rolls

Mid-Sized Portable Turning Roll

The WEBB Corporation Phone: (417) 673-4646 Fax: (417) 673-4649

402 E. Broadway • P.O. Box 549 Webb City MO 64870

www.webbcorporation.com FAB 3-13-15 IMT 12-26-14


FENIX GRINDING MACHINES

Looking For Exclusive Representatives

MARENA INDUSTRIES INC.

860-528-9011 • www.marenaind.com

IMP Magazine  

Known throughout the industry as the “bible” for metal manufacturers, Industrial Market Place has published and distributed bi-weekly issues...

IMP Magazine  

Known throughout the industry as the “bible” for metal manufacturers, Industrial Market Place has published and distributed bi-weekly issues...