Imp issue 3 15 18

MARCH 15, 2018 – VOL. 68, ISSUE #6 • Toll-Free: 800-323-1818 • IMPMAGAZINE.COM

SINCE 1951...CONNECTING BUYERS AND SELLERS IN THE METALWORKING AND MANUFACTURING INDUSTRIES

SHOW ISSUE March 18-21, 2018 ORLANDO, FL VISIT US AT BOOTH

307

WE ARE BUYING!!!

ARE YOU SELLING? VALVES MICRO MOTION FLOWMETERS ENDRESS HAUSER FLOWMETERS INSTRUMENTATION PIPE AND FITTINGS ELECTRICAL & PROCESS CONTROLS PLANT MACHINERY PSA SNUBBERS, ETC

Ferncroft

Management, LLC VISIT: www.FerncroftManagement.com email: valvebuyer@ferncroftmanagement.com

T. 978-815.6185 • FAX. 978.478.6557 CELEBRATING 40 YEARS OF SURPLUS BUYING IN 2018

Milwaukee, WI Permit No. 530

PAID

ATTENTION: MANAGER, BUY & SELL EQUIPMENT OR CURRENT POSTAL CUSTOMER

7842 Lincoln Avenue • Skokie, IL 60077 • USA

PRESORTED STANDARD U.S. POSTAGE

AUCTIONS

(2)

PUBLIC AUCTIONS

COMMERCIAL TRUCK TRACTOR, TRAILERS, TRUCK PARTS, COMPACT TRACTOR AND MACHINE SHOP EQUIPMENT AUCTION SATURDAY, MARCH 24, 2018 – 9:00 AM JOHN AND SALLY BOMBERGER 393 HOWER RD., OAKLAND MILLS, PA 17076 2003 379 PETERBILT TRUCK AND OVER-THE-ROAD TRAILERS JOHN DEERE COMPACT TRACTOR, KUBOTA COMMERCIAL MOWER, SNOW BLOWERS MACHINE SHOP EQUIPMENT AND TOOLS OVER-THE-ROAD TRUCK PARTS Directions: From Route 322 (Mifflintown, PA) – follow Route 35 north 4 miles to Oakland Mills, slight right onto Leonard Rd for ¼ mile, slight right onto Hower Rd, ½ mile to sale on left. From Routes 11-15 (Selinsgrove, PA) – follow Route 35 south 25.5 miles, turn left onto Troyer Rd for ½ mile, Hower Rd is 1st right, sale on right.

2003 379 PETERBILT TRUCK AND OVER-THE-ROAD TRAILERS

2003 379 Peterbilt 13 spd commercial truck tractor, with out-of-frame rebuilt C15 CAT 6NZ engine, uni-built 63” sleeper, 261” wheel base, Flex Air suspension, 2- 120 gal saddle tanks, Holland 5th wheel and slider (this truck sells with all documented service records including engine rebuild by Cleveland Bros), a very sharp truck tractor, selling w/$30,000 reserve • 2014 Utility 53’102” over-the-road tandem-axle van trailer a very sharp trailer w/ replaced suspension and R-title, selling w/$14,000 reserve • 1988 Great Dane 48”X102” van trailer for storage w/22.5 hub pilot wheels.

OVER-THE-ROAD TRUCK PARTS

Eaton Road Ranger RTO147-15 good truck tractor transmission • 120 gal polished aluminum 22” Peterbilt saddle tank, NIB • new Accuride 22.5 aluminum truck wheel • 11- new 22.5 steel truck wheels • Chelsea belt-driven electric clutch, NIB • truck tractor 5th wheel stand • used Holland truck tractor 5th wheels • used Peterbilt bumper • 4- rear and 2- front 22.5 Peterbilt Alcoa truck tractor wheels • Alcoa 24.5 steering wheel, NIB • Eaton DS402 truck tractor power divider, good • Eaton 404 power divider and front rear, 1 million miles good • 5th wheel slider and stand • Eaton Fuller truck transmission top plate, NIB • truck trailer load jacks • 4- BF Goodrich used 22.5 steering tires • 6- new lined brake shoe kits • boxes of truck tractor and trailer lighting • new Hendrickson 1” suspension bolts • buckets and buckets of grade 8 fine-threaded machine bolts • spreader bar and pogo stick for trailer alignment • box of Brockway ‘Diesel’ hood emblems • box of 33mm hub pilot lug nuts • Holland 5th wheel tool.

Terms: Cash or good check, paid in full sale day – Lunch stand – Sale held rain or shine.

JOHN DEERE COMPACT TRACTOR, KUBOTA COMMERCIAL MOWER, SNOW BLOWERS

2002 John Deere 4400 dsl 4WD utility compact tractor, HST, selling w/$10,000 reserve • John Deere 72” belly mower (never used) • Kubota F2100 commercial 4WD hydrostatic dsl 72” front-mounted mower w/power steering • Ariens 5520 20” snow blower • 2- Toro 1800 Power Curve electric snowblowers • Poulan 21” push mower • 2-wheel yard cart • Eager Beaver 2014 chain saw • Craftsman 22” gas trimmer • Homelite 20” gas trimmer • Ingersoll-Rand wacker.

MACHINE SHOP EQUIPMENT AND TOOLS

Hydro Tek, US Model HP22005E2 portable 2200 psi @ 250 degrees steam jenny w/CAT pump and 100’ hose • Generac 8000 EXL electric start portable generator • Coats 6401 direct drive 3-phase computerized truck tire balancer, sells w/3 HP phase converter • Harrison M300 13” swing 220 single-phase metal turning lathe w/3-jaw & 4-jaw chuck, complete w/quick-change tooling and accessories • Emglo stationary single-piston air compressor w/electric • South Bend 4024 single-phase 2HP metal turning lathe w/3-jaw and 4-jaw industrial lathe chucks • South Bend milling machine, single phase 1HP with 42” X 9” power feed table (has adapter to make it horizontal or vertical) • 3- hydraulic pallet jacks • Hossfeld custom electric hydraulic stationary tube bender w/Hossfeld 4X1” tubing radius and Hossfeld 6X1½” tubing radius, used for race car tube bending • 10’ portable tubing rack • Delta Model 28-365 variable speed single-phase 19” metal cutting bandsaw w/141” blade • Keller bench top stationary hack saw • table-top jig saw •Snap-On Model YA449A pneumatic sand blaster • Lincoln AC 225 amp welder • Snap-On MFXHD35 HD automatic transmissioner • Stationary electric pedestal filing machine • draft table • Craftsman 210” 3HP table saw • Cook Bros. parts cleaner • Clark CPTE45 pallet jack • Gray RSJ-22 44000 lb pneumatic jack • 2- Duff RR jacks • Reddy Heater • 4’X6’ 3100 lb jig/welding table • various shop tables • 5’ sheet metal rack • heavy duty industrial steel stock rack • 36” metal industrial shop shelving • metal utility tool and shop cabinets • metal locker • 2- aluminum lockers • Craftsman upright tool cabinet • misc steel sheeting • misc aluminum and steel stock • stationary wall-mounted bolt bin • shop creepers • dual-wheel dolly • barrel cart • Nutting industrial shop cart • Cole 5-drawer file cabinet • metal shop desk & chair • Grey-Rock brake blocks • Matco ¾” drive 41” torque wrench • 42” bolt cutters • pneumatic framing nailer, like new • car ramps • metal trash can • parts washer fluid • 55 gal of new Castrol 80W140 synthetic gear oil • 500 watt wall-mounted utility lamp, NIB • single phase 3 HP, 2 HP, ¾ HP, ½ HP motors • 275 gal fuel tank • Mobil Synthetic lubricant tank w/pump • antique vintage floor model combination safe • Craftsman motorcycle lift • industrial bits, reamers and tooling • red oak equipment blocks • short truck chains and load binders • 5 gal ARO pneumatic grease pump • Werner 16’ fiberglass step ladder • 12’ wooden step ladder • 30 lb LP gas tank • R-12 freon.

DARROW EXCAVATING ABSOLUTE AUCTION OF

COMMERCIAL TRUCKS AND TRAILERS EXCAVATING AND HEAVY CONSTRUCTION EQUIPMENT BLACKTOP AND CONCRETE EQUIPMENT

SATURDAY, MARCH 31, 2018 – 10:00 AM JUNIATA COUNTY FAIRGROUNDS 308 W 8t St., Port Royal, PA Directions: from Harrisburg – follow Route 322 West 36 miles to Route 75S (Port Royal Exit), 2 ½ miles, turn right on 8th St, .2 mile to Fairgrounds on right. From State College – follow Route 322 East 39 miles to Route 75S (Port Royal Exit), 2 ½ miles, then turn right on 8th St, .2 miles to Fairgrounds on right. From PA Turnpike – Route 76, take Willow Hill, Route 75N Exit 39 miles, turn left on 8th St, .2 mile to Fairgrounds on right..

COMMERCIAL TRUCKS AND TRAILERS

2008 Peterbilt 378 tri-axle dump truck, C-15 CAT engine, 13 spd Road Ranger transmission electronic odometer, 270,000 original miles w/Brandon Model 18-54-60 dump w/grain chute & electric tarp, very clean, very nice with all the chrome • 2004 Peterbilt 379 tri-axle dump truck, C-15 CAT engine, 18 spd Road Ranger transmission, 333,000 orig miles w/Brandon Model 18-54-60 heated dump w/grain chute & electric tarp, very nice with all the chrome • 2007 Peterbilt 379 day cab tri-axle double frame truck tractor, C-15 CAT engine, 18 spd Road Ranger transmission, differential lock, 500,000 miles, VIN 1XP5DB0X77N883898, very sharp truck w/all the chrome • 2001 Fontaine TL50-NGB 50T detachable drop deck lowboy tri-axle trailer w/lift and 25’ well, nice • 1993 Custom 8’X25’ 10T tandem-axle deck-over gooseneck trailer w/beavertail ramps & air brakes (works w/tandem- or single-axle tractor) • 2004 Ford F-550 Super Duty crew cab 4X4 dsl dump truck w/Western 8’ snow plow, 93,000 orig miles very nice • 2007 Ford F-450 Super Duty dsl utility truck, 158,000 miles (engine re-worked, 9’ Knapheide utility box w/ladder rack & extra boxes), very nice truck • 2013 Cam Super Line 6’9”X19’ 10,000 lb pull-behind tilt trailer, like new (15’ tilts) • 1986 International S-Series tandem-axle dump truck, 58,400 GVWR, Cummins dsl, 13’ aluminum bed w/grain chute (former PennDOT truck) • 1988 Ford F800 dsl single-axle 10’ dump truck, 26,500 GVWR w/5 spd/2spd rear • 1986 Moritz 6’X16’ 10,000 lb pull-behind livestock trailer w/wooden floor, drop gate, side door, electric brakes & new paint • 1991 Ford F800 dsl automatic 81,000 mile pole truck w/15’ utility bed (Altech Digger Derrick remote hydraulic 18” auger pole truck w/20T wench – former Bell Telephone truck) • 1992 Cherokee 26,000 lb drop-deck spread-axle trailer w/air brakes (used w/single-axle truck tractor) • 1975 Chevrolet C-65 15’ rescue truck w/21,000 orig miles, 350 HP 427 gas engine, automatic transmission (former East Waterford Fire Co rescue truck equipped w/electric wench, Owan 6.5 KW gas generator & lighting) • 1992 Ford E-350 Emergency Ambulance vehicle, 7.3 dsl, 105,000 miles, automatic, makes an excellent utility vehicle

Terms: Cash or check, no credit cards. No buyer’s premium.

BLACKTOP AND CONCRETE EQUIPMENT

1972 PF-65 BLAW-KNOX paver w/8’-12’ screed w/Ford 4 cyl industrial motor • BOMAG Model BW100AD 3’ vibratory asphalt roller w/Deutz dsl • 21” motorized Wacker vibratory plate tamper • Ingersol-Rand SD 40D 54” vibratory articulating wheel roller w/John Deere 3 cyl dsl • Aeroil LP gas tar buggy • 4’ power trowel • 3’ power trowel • 8’ vibra-screed w/gas engine • concrete vibrator w/gas engine • miscellaneous concrete hand tools.

EXCAVATING AND HEAVY CONSTRUCTION EQUIPMENT

CAT 315DL track hoe w/manual thumb, SN CJN01482, 2,643 orig hrs, this machine is plumbed for a hammer, 80% undercarriage, originally purchased from CAT w/600 hrs on it, nice machine • 7’ quick-attach smooth-edge bucket, fits track hoe • CAT 953B track loader, 80% undercarriage, 11,673 hrs, SN 5MK00881 • John Deere 624E 4X4 articulating loader w/bucket, plumbed w/remote hydraulics, 4,150 hrs, nice, very strong machine • JRB Model 624E pallet forks w/hydraulic thumb • JRB Model 624E side dump bucket • 14’ power angle snow plow, fits 624E • CAT D4C dozer w/6-way blade, ROPS, SN 1RJ00458, this machine sells w/new motor, 80% undercarriage, 9,508 hrs, nice • used CAT D4C idlers • CAT D5MLGP hi-trac dozer w/10’6” blade, SN 3CR00480, nice • CAT 304C CR mini-hoe w/power angle blade, quick-attach bucket, plumbed w/hydraulics, 2,625 orig hrs since new, very nice • new rubber tracks fit CAT 304C mini-hoe • CAT 426B 4X4 backhoe plumbed w/extra hydraulics, 2,840 orig hrs, SN 6KL00311, nice machine • CAT 28” quick-attach hoe bucket • CAT 910 articulating wheel loader w/80” bucket, 8,305 hrs, SN 80U7260 • CAT #12 12’ 6 wheel drive motor grader, SN 89H653 • CASE-DAVIS Model Fleetline 70+4 4X4 8’ ditch witch w/rear hoe & power angle back-fill blade, handy machine • KOBELCO Mark IV 300 track hoe w/4’ bucket, shows 1,007 hrs, this nice machine will ‘get it done’ • CAT 312 track hoe, SN 7DK00696, 7,506 hrs, sells w/new motor • CAT 262 turbo-dsl skidloader w/CAT controls, 2,078 original hrs, sells w/84” smooth bucket • skidloader quick-attach pallet fork • skidloader quick-attach 12” hydraulic tree shear • BOBCAT quick-attach 5’ hydraulic ditch witch, fits any quick-attach skidloader • CARE TREE Model 501 quick-attach hydraulic tree spade, fits any quick-attach skidloader • CAT 7’ hydraulic 4-in-1 bucket, fits CAT 955 loader • Galion Model MG 10’ motor grader, SN 20436, nice & straight, should be in someone’s museum • Vermeer Model 630B motorized portable belt-driven stump grinder w/hydraulic swing & 4 cyl Wisconsin • Hensley 30” GP hoe bucket w/rippers • LEMAC 30” ditch bucket • Site-Lite SL4000 light plant w/3 cyl Kubota dsl, 6,087 hrs • 10’ Model 91 Jersey Box, fits dozer • 10’ pull-type Jersey Box w/penal hook • 3’ 5 ½ HP power trowel • hand-held motorized wacker • small portable motorized blower • hydraulic excavator hammer w/4” bit • Kent KHP 210 34” hydraulic vibratory plate • EZ-Screen 500XL motorized portable soil and gravel screener, like new w/150 hrs • 2- vintage Caterpillar D4 dozer crawlers w/blade, 1 runs w/pony motor & D4 winch, 1 is tight w/direct start • Allis Chalmers 160 dsl farm tractor.

AU-001656-L – www.bdiauctions.com - 717-527-2449 www.auctionzip.com - ID #1244 for pictures

FOR SALE / WANTED

March 15, 2018

CURRENT & PAST ISSUES - VISIT IMPMAGAZINE.COM

3

METALS WANTED

SPECIALIZING IN...

NEW, USED WE BUY & OBSOLETE & SELL MOLDED CASE

Web-Site

CIRCUIT BREAKERSS 800-805-6557

FURNACES & OVENS WANTED

The “Elder Statesman” of Used Ovens & Heat Treating Furnaces

SIN

19

We Buy/Sell/Trade Furnaces, such as:

Walk-In Ovens • Box • Pit Type • Belt • Atmosphere Generators • Box Type Draw • Internal Quench • Vacuum • Combustion Air Blowers Visit Our Web Site: Email: sales@whkay.com www.whkay.com

The W.H.

ay Company

30925 Aurora Rd. • Solon, OH 44139

440-519-3800 • Fax: 440-519-1455

www.

.com

OVER 150 IN STOCK…READY FOR INSPECTION & DELIVERY

For Complete Specifications and Pricing

Address at

CALL US TO PURCHASE:

COILS • SHEETS • PLATE • PIPE • STRUCTURALS • WIRE

STEEL • STAINLESS • ALUMINUM

WE ARE GOING INTO OUR 36TH YEAR GOING INT

OF BUYING SURPLUS METAL!

1-800-922-6836

impmagazine

www.utahbreakers.com... brent@utahbreakers.com.......

THE W.H. KAY COMPANY

Check Our

CE

36

for Product Listings & Hyper-Link Web-Site Addresses For Our Current Advertisers

215-922-6855

3 Bala Plaza, Suite #202 West Bala Cynwyd, PA 19004

FAX: 215-922-6467 E-mail: chris@lombardmetals.com Website: www.lombardmetals.com

4

March 15, 2018

FOR SALE / WANTED

CURRENT & PAST ISSUES - VISIT IMPMAGAZINE.COM

INDEX

COVERS ADVERTISEMENTS OF BOTH EQUIPMENT “WANTED” AND “FOR SALE” AUCTIONS, ON-LINE AUCTIONS, BID SALES AUCTION SECTION............................................................ .......................................................INSIDE FRONT COVER, 7-10, INSIDE BACK COVER, BACK COVER BEARINGS................ 5,INSIDE BACK COVER BI-FOLD DOORS............................................5 BUSINESS OPPORTUNITIES.........................5 CIRCUIT BREAKERS......................................3 CORROSION PROTECTION MATERIAL.......5 ELECTRICAL EQUIPMENT........................ 3-7 ELECTRIC CONTROLS.......... FRONT COVER FITTINGS................................ FRONT COVER FLOWMETERS....................... FRONT COVER FURNACES..................................................3,4 HARD WAX OIL..............................................7 INDUSTRIAL EQUIPMENT.............................3 INSTRUMENTATION.............. FRONT COVER METALS..........................................................3

MIST COLLECTORS.......................................4 MOTORS.........................................................5 OIL MIST COLLECTORS................................4 OVENS............................................................3 PIPE........................................ FRONT COVER PLANT MACHINERY.............. FRONT COVER PRODUCTION BROACHING..........................7 RECYLING EQUIPMENT................................6 SCHWEISS BI-FOLD DOORS........................5 SCRAP............................................................6 SMOKING SHELTERS....................................5 TRANSFORMERS...........................................4 TUNGSTEN CARBIDE....................................6 VALVES................................... FRONT COVER

FULL PAGE ADVERTISERS FERNCROFT MANAGEMENT LLC (www.ferncroftmanagement.com).........FRONT COVER BAY POWER (www.baypower.com)...........................................................................................6 BRYAN D. IMES & SONS (www.bdiauctions.com)......................INSIDE FRONT COVER GRS AUCTION SERVICES (www.grsauctions.com).................................................................10 HENDERSON AUCTIONS (www.hendersonauctions.com)........................................................9 HARTLAND MACHINERY CO. INC. (www.hartlandmachinery.com) .......................... .......................................................................................................INSIDE BACK COVER THOMAS INDUSTRIES, INC. (www.thomasauction.com)................................BACK COVER Connecting Buyers and Sellers in the Metalworking Industry...Since 1951

MARCH 15, 2018 VOLUME 68, NO. 6

Since 1951, Industrial Market Place has proven to be a trusted meeting place for the industrial community.

By expanding your market, we create new opportunities for buyers and sellers of machinery and industrial equipment.

INDUSTRIAL MARKET PLACE 7842 N. Lincoln Ave., Skokie, IL 60077

For Advertising Information, Call Toll-Free:

800-323-1818 (From United States & Canada)

847-676-1900 • Fax: 847-676-0063 website: www.impmagazine.com e-mail: info@impmagazine.com PUBLISHER Joel Wineberg x204 ART/PRODUCTION DIRECTOR Ashur Mikael x216

DATA ENTRY Ashley Chrzan x218

MIST COLLECTORS

WEEKLY AUCTION BULLETIN! START YOUR MONDAY’S WITH OUR “HOT” LIST OF AUCTIONS VISIT m ine.co z a g a IMPM AND SIGN-UP TODAY!

INTERNATIONAL SALES REPRESENTATIVES Dave Ernst x213 Gloria Lappe x219 Jon Schneider x214 Judie Sibell x221 Dan Tepperman x223 ASSOCIATE PUBLISHERS Jeremy Solomon x202 Eliot Wineberg x201 FOUNDER Henry J. Wineberg (1906 - 1983)

Established in 1951, Industrial Market Place is published every two weeks. All advertisements and designs are the property of the publisher and may not be reproduced in any form without permission.

SUBSCRIPTIONS: 26 yearly issues mailed first class.

Cost is $195.00 for 1 year; $295.000 for 2 years.

We Accept American Express, Discover, MasterCard and Visa

MEMBER: PEARL (Professional Electrical Apparatus Recycling League) • INVESTMENT RECOVERY ASSOCIATION INDUSTRIAL MARKET PLACE is listed in Standard Rate and Data Service’s Business Publication Rates and Data.

FURNACES

Affordable Paragon heat treating furnaces PMT

Affordable, reliable, and made in the USA since 1948.

800-876-4328 / 972-288-7557

-18

• 4” thick walls • Safety switch turns off

heating elements when you open the door

• Fully programmable digital $ controller 2,820 .00 • Heavy duty hinge shaft Paragon Industries, L.P. 2011 S. Town East Blvd.

• 18” W x 13” D x 13” H Mesquite, Texas 75149 Rated to 2350°F / 1287°C • 800-876-4328 www.paragonweb.com • Many other sizes available info@paragonweb.com

SMOKING SHELTERS

FOR SALE / WANTED

CURRENT & PAST ISSUES - VISIT IMPMAGAZINE.COM

March 15, 2018

5

BUSINESS FOR SALE WELL-ESTABLISHED, WELL-RESPECTED

FORKLIFT REPAIR BUSINESS FOR SALE Based in PANAMA CITY, FL

with Large Territory ... Call for Details INCLUDES:

FORKLIFT PARTS, TIRE PRESS, PARTS BOOKS AND ETC. 95% of repair is road service work.

Staff includes two mechanics and one office assistant.

Will help the right person transition into this business.

Please Call For More Details!

850-832-2742

ELECTRICAL EQUIPMENT WANTED

ELECTRIC MOTORS CONTROLS • TRANSFORMERS – Bought and Sold – • Squirrel Cage • Design D • Gear Motors • Slip Ring Press Motors • D.C. Motors We Sell Reconditioned or “Electrically O.K.” We Will Also Buy Your Spares!

Contact:

ROW ELECTRICAL EQPT.

800-248-4479 • FAX: 419-244-8887 E-mail: rowelec@glasscity.net Website: rowelectrical.com

6

March 15, 2018

FOR SALE

CURRENT & PAST ISSUES - VISIT IMPMAGAZINE.COM

YOUR TRUSTED SUPPLIER OF NEW, USED, & OBSOLETE ELECTRICAL SOLUTIONS FOR OVER 25 YEARS Circuit Breakers

GE/Zenith Transfer Switches

Motor Control

Switches & Disconnects

Bus Plugs

Panel Boards/Switchboards

ABB/Baldor Motors

Custom UL 508A Control

ABB Drives & Soft Starts

Transformers

Industrial, Commercial & Residential, Molded & Insulated Case, Air & Vacuum, Accessories

Automatic & Manual, Low & Medium Voltage, UL1008 Listed, Indoor & Outdoor Enclosures

MCC Buckets, Combo & Feeders, Terminal Blocks, VFD, Starters, Contactors , Push Devices, CPTs

Panel Mount & Hardware, Safety Switches, Solar Switches, General & Heavy Duty

Breaker Type, Fusible Type, 3 Wire & 4 Wire, With or Without Ground

Various Voltage & Amp Configurations, 1 Phase/3 Phase, 3 & 4 Wire, NEMA 1 & 3R

In Stock, NEMA & IEC, Low & Medium Voltage, Stainless Steel, Washdown, Metric, HVAC, AEGIS

Pump/Industrial/Lighting Control, VFD & Soft Start Packages, HVAC, N1/N3R/N4X Enclosures

Industrial, NEMA Rated, ACS & ACH Replacement Parts, Custom Industrial Drive Packages, 2-year Warranty

Single Phase and Three Phase, NEMA 1 & NEMA 3R, Low & Medium Voltage

MULTIPLE INVENTORY LOCATIONS · EMERGENCY & DELIVERY SERVICES · CERTIFIED WOMANOWNED

AU T H O R I ZE D D E A L E R F O R

ABB · AEGIS · Baldor Motors · Bussmann · Connecticut Electric · EXM Enclosures · FPE Transformers · Franklin Control Systems · GE/Zenith Controls · Hammond Manufacturing · IBOCO · Mennekes · MGM Transformer Co Milbank · Reliance Motors · Saginaw Control & Engineering · TECO Westinghouse

OT H E R B R A N DS W E C A R RY

Allen Bradley · Cutler Hammer · FPE · GE · Siemens/ITE · Square D · Westinghouse · Zinsco · American · Boltswitch · Challenger Connecticut Electric · Crouse Hinds · Furnas · Murray · Thomas & Betts · Wadsworth · and other top manufacturers

SAN JOSE, CA 800-699-2980

ROSEVILLE, CA 800-604-7360 2013 Opportunity Dr. Ste. 100 Roseville, CA 95678

MODESTO, CA 888-732-5250 626 Kearney Ave. Modesto, CA 95350

FORT WORTH, TX 866-999-2701 2848 SE Loop 820, Ft. Worth, TX 76140

PEARL CERTIFIED

NEWEST LOCATION

UL 508A PANEL SHOP

UL 508A PA NE L SHOP

1095 N. 7th St. San Jose, CA 95112

WWW.BAYPOWER.COM · SALES@BAYPOWER.COM

AUCTIONS FOR SALE / AUCTION

March 15, 2018

UP-TO-DATE AUCTION LISTINGS VISIT IMPMAGAZINE.COM

7

PUBLIC AUCTION SATURDAY, MARCH 31, 11 AM

Onsite at 269 Saint Clairs Crossing • Bluefield, Va 24605

FOR MORE DETAILS AND PICTURES VISIT www.AuctionZip.com - ID# 17860 REGENCY REAL ESTATE & AUCTION CO.

WVAL#575 • VAAL#438 • VAAF#181

ONLINE AUCTION

Eddie Pauley, Broker/Auctioneer Cell: 304-320-1624 • Office: 276-322-3448 J.E. “Eddieâ€? Pauley Jr. Va Lic. #438 WV Lic. #575 Josh Sweeney Va Lic. #3264 WV Lic. #1759 Jeremy Bourne Va Lic. #4517 WV Lic. #2297 eddie@regencypauley.com www.regencypauley.com

CLOSING FROM

1PM CT

APR 12

Large Capacity CNC Lathe, HBM’s, Welding Systems & Annealing Furnaces

Closing From: Thursday, April 12, 1:00 PM CT Location: 1777 Gears Rd., Houston, TX 77067 Inspection: Wednesday, April 11, from 9:00 AM - 4:00 PM CT FEATURING: 2012 TACCHI HD/3 1000 x 7000 Series 140H Heavy Duty CNC Lathe; 2012 MAG RT1250 CNC HBM; (5) 1997-98 GIDDINGS & LEWIS CNC HBM's; WARNER & SWASEY SC32 CNC Slant Bed Lathe; (2) AMET CBMF 3 x 2.5 ADVENT-BR-FX Bore Cladding Welding Systems; ARONSON & PRESTON EASTIN Welding Manipulators; BEAVERMATIC Annealing Furnaces; & more

Sale Held in Conjunction With:

Offers Invited

2012 1998

2012 1998

Auction Contact: Jennifer Reiner | +1 847.545.6374 jennifer@perfectionindustrial.com (3) Available

www.perfectionindustrial.com

(3) Available

2002

(2) Available

Joe Lundvick, TX Auctioneer Lic# 17682 Steve Kleba, TX Auctioneer Lic# 17683

AUCTIONS

Directions: From US 460, Take Exit 1 toward US-19 N, Bluefield. in 0.6 miles turn left onto St. Clairs Crossing, In 0.2 miles, the destination will be on your left. Auction will be held in the Coal Fillers, Inc. building. Look for signs.

PRELIMINARY LISTING: • 2001 Ford F350- Dually, 4WD, Crew Cab, 8’ Bed, • Wheelabrator Type Shot Blast System- 4 wheel x White, new F450 springs (rear), new rear bearings, 30 hp, 20� w x 40� H opening, 60’ Infeed/60’ OutF450 rear end. feed Conveyor (Electric), Baghouse/Dust Collection • Heavy Duty Work Table- 5’ wide x 20’ long, heavy System Included. duty steel work table, 4000 lb capacity. • Trennjaeger PMC 12-N Cold Saw- Rotates 45 • Lincoln DC-400 Stick Welder- 460/3 ph 400 amp.

Degrees, 3-36� Diameter newly sharpened blades, • Miller 452 Delta Weld- Power Center only.

Hydraulic presses included, Cuts heavy structural • Cincinnati Press Brake- Heavy, mechanical press sections 30� D x 14� W. brake, bends 5/8� plate. • Peddinghaus 210 Super 20 Iron Worker- Includes • Blue Air Compressor- Whole shop, large tank air punches/dies. compressor. • Miller 500 SS Gold Star Welder- (2) 500 amp • Miller Deltaweld 452 w/ Series 70 Wirefeeder- Two welding units.

(2) units. • Controlled Automation Beamline/Sawline- 5 press • Pearson 3/8� x 8’ Shear- Hydraulic Shear. unit, Includes Hydraulic power unit, Punch dies, • MG Industries Plasma Table- Hyperthem Max-200 Can punch 1� hole in 1� thick flange, 60’ Infeed power unit, Downdraft table, dust collection Electric Conveyor, 100’ Outfeed Electric Conveyor, system included.

2 x 25’ w x 60’ l Hydraulic Transfer Tables, 25’ • 5T Free-Standing Jib Crane- 15’ under boom, 20’ w x 50’ l Hydraulic Transfer Table, 25’ w x 30’ l span, Foundation required, hoist not included.

Hydraulic transfer table. • Thermal Dynamics Professional Plasma TorchCuts 3/4� steel plate, Uses compressed air or oxygen.

March 15, 2018

AUCTIONS

PUBLIC AUCTION

8

SURPLUS ASSETS

CB&I

3191 WEST LINCOLN ROAD IN LAKE CHARLES, LA 70605

TIMED, ONLINE ONLY BIDDING CLOSES:

THURS, APRIL 5th at NOON CDT Inspection: Day prior to auction from 9AM-4PM

LARGE CAPACITY STRUCTURAL STEEL FABRICATOR

2009 DEUMA AMR20/50 Seam Welder • (4) 2013 SILICON D36NG Stud Welders • (2) 2011 SILICON D36NG Stud Welders • 2011 SILICON D36 Stud Welder • (2) 2010 SILICON D36 Stud Welders • (2) 2011 & 2009 TANAKA LMX VII-TF6000 Lasers • 12' x 75' Plate Straightening Press • 2009 DEUMA PQ10000 Welding Gantry • 2009 OGDEN Stiffener Fitting Gantry • 2011 GERIMA Fasrapid LGA3000 TYPIII Plate Beveler • (7) 70' 85-Ton Spreader Bars

18% Buyer's Premium Online w/bidspotter.com Auction License Numbers: Myron C Bowling - 1550, Myron Bowling Auctioneers, Inc. - AB-223

513/738-3311 | myronbowling.com

(5)

AUCTIONS

UP-TO-DATE AUCTION LISTINGS VISIT IMPMAGAZINE.COM

AUCTIONS

#1 - COMMERCIAL EQUIPMENT - TOOLS - SUPPLIES Jacksonville, IL • Monday, March 12 - 10:00 AM

Commercial Welding Equipment • Tools • Supplies: Carbon Grade SA333 & Assorted Piping • Aluminum • Scaffolding & Assorted Various Other Items Not Mentioned!

#2 - ESTATE AUCTION (Trail Blazer, Bass Boat, Tools) Jacksonville, IL • Thursday, March 15 - 9:00 AM

PUBLIC AUCTION

SATURDAY, MARCH 24, 2018 @ 11:00 AM QC MACHINE CORPORATION 432 E. 4TH STREET • DAVENPORT, IA

In order to help settle the estate of Mr. Jeff Maring, an auction has been scheduled at the above date and time. Items include, but are not limited to:

MACHINES, TOOLS, SHOP ITEMS:

• (3) Tormach CNC 1100 Series II Milling Machines • (2) Eagle Milling Machines • MV 54 HD Milling Machine • Wells Index Milling Machine • Mitek Milling Machine • Clausing Kondia Milling Machine • MicroKinetics CNC Lathe • Clausing Colchester V513 Lathe • Enco Metal Lathe • Gamet Lathe • AM Pak Packaging Machine • Quincy QT-5 80 Gal. Commercial Air Compressor • Oxygen/Acetylene Torch Set • Sand Blasting Cabinet • Wellsaw Power Hacksaw • Rockwell 20 Bandsaw • Air Shear • Porta Power • Cut-Off Grinder • Collettes • Boring Bars • Spade Drill • Grooving Tools • Turning Tools • Rockwell Hardness Tester • Mitutoyo Micrometer

• Snap-On Wrench Sets • Craftsman Tool Boxes • Snap-On Tool Boxes • Machinist Chests • Rolling Carts • Precision Measuring Tools • Thread Gauges • Horseshoe Gauges • Broach Bars • Broach Bushings • Bar Stock • Shelving Units and Racking • Work Benches • Parts Bins • Cat Pallet Jack • 4 Ft. Maxx Air Floor Fan • Air Hose • Sawzall • C-Clamps • Drills • Reamers • 250+ Gallons of Castrol Clearedge 6519 Lubricant In Large Storage Container • Hazmat Quick Dry Holder • Antique Foot Driven Metal Lathe • Antique Alphabet Press • Plus Much, Much More!!

GUN PARTS:

• Hundreds of Hand Rails • Barrel Guards • Barrel Bushings • Lock Rings • Hand Guards • Barrel Nuts • Plus Much, Much More!

Auctioneers note: Mr. Jeff Maring was a very gifted machinist, took very good care of his machines, and had a very clean shop. Plan to attend this great auction!

Bloomberg Auction

309-644-1854 • www.AuctionZip.com - ID# 17775

Large Amount of Various Items of Electrical Equipment, Tools & Supplies – Scaffolding w/ Wheels-Walk Boards & Braces – Several Ladders – (2) Knack Job Boxes – Supply Bins – HD Shelving – Baker Racks - Delta 16 ½” Drill Press

#3 - ESTATE AUCTION (Trail Blazer, Bass Boat, Tools) Jacksonville, IL • Saturday, March 17 - 9:00 AM

Large Amount of Various Items of Electrical Equipment, Tools & Supplies – Scaffolding w/ Wheels-Walk Boards & Braces – Several Ladders – (2) Knack Job Boxes – Supply Bins – HD Shelving – Baker Racks - Delta 16 ½” Drill Press

PUBLIC AUCTION!

#4 - EQUIPMENT - TRUCK - FORK LIFT - COMMERCIAL WELDING EQUIPMENT

FRIDAY, APRIL 20, 2018 START TIME IS 8:30 AM – SKID LOTS SELLING ABSOLUTE

TRUCK: 2006 Dodge Dually 3500 4 Door Bradford Built • FORK LIFT: Cat Fork Lift 3 Stage Lift EQUIPMENT & SUPPLIES: Evolution Steel Cutting Circular Saw - Delta Portable Planer, 12 Inch - Lincoln Electric Welder 500 Vantage • Lincoln Welder on Wheels, 200 Amp 30 Volt • Miller Wire Feeder Air Powered Chipping Hammer - Rigid Power Pipe Threader • Milwaukee Portable Band Saw • Electric Conveyor • (4) Crane Baskets • Many More Items Too Numerous To List

RING 1 – 9 AM DAY CABS, SLEEPERS, DUMPS, REEFER/ BOX TRUCKS, UTILITY/SERVICE TRUCKS RING 2 – 9:30 AM ATTACHMENTS, CLASSIC CARS, CARS & PICKUPS, FORKLIFTS, CONSTRUCTION/AG EQUIPMENT, LANDSCAPE STONE RING 3 – 12:30 PM TRAILERS & CONTAINERS

#5 - Auction - 2016 GMC Canyon, Bluffs Residence, Miscellaneous

CALL TO ADD YOUR ITEMS TO THIS SALE BY APRIL 6TH

Jacksonville, IL • Monday, March 19 - 10:00 AM

Jacksonville, IL • Tuesday, March 27 - 5:00 PM

105 N. WABASH, BLUFFS, IL RESIDENCE - Single Story w/3 bedrooms – 1 ½ Baths – Living Room – Dining Room – Kitchen – Lot Approximately 100’ x 100’

For Details, Pictures Visit www.middendorfs.com or auctionzip.com ID #3493

Middendorf Bros. Auctioneers and Real Estate

211 South West Street • Jacksonville, IL 62650 217-243-5486 • www.middendorfs.com • www.AuctionZip.com - ID # 3493

1-866-511-2493 www.HessAuctioneers.net • Sales@HessAuctioneers.com 1451 River Rd., Marietta, PA 17547 #AY2025, AH1856, VB1159

AUCTIONS

March 15, 2018

UP-TO-DATE AUCTION LISTINGS VISIT IMPMAGAZINE.COM

auctions

Selling in March & April

Construction Auction

Opens: March 19th I Closes: March 21st

Online Only

Surplus Construction Equipment

LLC

Live Auction - Baton Rouge, LA

Thur/Friday I April 5th & 6th

(2) Shops full of Industrial Equipment

Marine/Oilfield Auction Thursday I April 26th I 9am

Live Auction - New Orleans, LA

Vessels I Barges I Equipment

HendersonAuctions.com 13340 Florida Blvd., Livingston, LA 70754 • LA lic# 136-18

Questions? Call:

LOUISIANA AUCTIONEERS ASSN., INC.

LAA

AUCTIONS

3

Upcoming

9

AUCTIONS

10

March 15, 2018

UP-TO-DATE AUCTION LISTINGS VISIT IMPMAGAZINE.COM

AUCTIONS

(2) PUBLIC ONLINE ONLY AUCTIONS #1 - MACHINE SHOP STOCK UP Begins Closing: March 19th @ 7:00PM CDT (End) Preview Date: March 15th from 10:00AM to 2:00PM Pickup Date: March 21st from 9:00AM to 4:00PM Location: Sauget Warehouse • 1401 Mississippi Ave., Bay 1, Sauget IL 62201

STOCK UP ON MACHINE SHOP ESSENTIALS

And if you are looking for bar stock, be sure to call the GRS office and ask Brad about our great deals.

MAC Tool Box • Hose Reels • Ladders • Bar Stock • Carts Tool Boxes and More Equipment for Your Shop Ask about the racking we are also selling direct and watch for the upcoming Bid Spotter Auction featuring machinery and other equipment.

Bid Now at www.GRSAuctions.com

#2 - AVIATION FABRICATION SHOP Begins Closing: March 21 @ 7:00PM CDT (End) Preview Dates: March 15 @ 10:00AM CDT (Start) • Mar. 15 @ 3:00PM CDT (End) Pickup Dates: March 23 @ 9:00AM CDT (Start) • Mar. 23 @ 4:00PM CDT (End) Location: Sauget Warehouse • 1401 Mississippi Ave., Bay 1, Sauget, IL 62201

FABRICATION EQUIPMENT FOR THE AVIATION INDUSTRY. HIGHLY SPECIALIZED TOOLING AND MACHINE COMPONENTS FOR A VERY UNIQUE SHOP. FABRICATION EQUIPMENT FOR THE AVIATION INDUSTRY. HIGHLY SPECIALIZED TOOLING AND MACHINE COMPONENTS FOR ANY FABRICATION SHOP Yale Propane Fork Lift • Ingersoll Rand Air Compressor • Denray Down Draft Tables Manual Press • Belt Drive Engine Lathe • Zeks Heat Sync True Cycling Air Dryer Hobart Mobile Generator • Antique Ansul Fire Extinguisher • Delta Drum Sander • and more!

Bid Now at www.GRSAuctions.com GRS Auction Services 1727 Bluffview Drive • Dupo, IL 62239 Phone: 618.286.4010 • Fax: 618.286.4060 Email: info@grsauctions.com

Bid Now at www.GRSAuctions.com Bid anytime, anywhere using the GRS app.

Download the app from Google Play or the Apple App Store

29

June 30, 2016

www.impmagazine.com

INTERNET DIRECTORY

INTERNET DIRECTORY Air-Vac Systems www.air-vacsystems.com In the Business of Clean Air Solutions for Over 25 years. All of our Industrial Air Cleaning Equipment is Self-Contained for Use Individually

Bidspotter, Inc. www.bidspotter.com World Leader In Live Interactive Auction Broadcasts. Created By Auctioneers For Auctioneers Bliss Clearing Niagara

or in Groups without Exhausting Your Heat or A/C. www.bcntechserv.com Choose Experience For Stamping Press Repair, No Duct Work Required. All Equipment is Hand Built in Iowa with Industrial Grade Components.

Filter Capabilities of Removing Any Particulate As Well As Carcinogens, VOC’s, Toxic Gases, Chemical Fumes, Mold, Bacteria and Viruses.

Energy Cost Savings Alone Make Your Air-Vac System an Attractive Investment for Small operations to Large Manufacturing Facilities.

Alloys & Components, Southwest www.alloysandcomponents.com Metric Hydraulic Cylinder Tubes & Rods Up To 200mm, Cut-To-Length - No Minimum Order Same Day Ship

Press Parts, Press Rebuilds & Stamping Press

Manufacturer of Abrasives, Belt Grinders & Polishing Machines Carnie Cap www.carniecap.com Providing The Most Effective Way To Cap Exposed FastEST, Inc. www.fastest-inc.com Estimating & Takeoff Software for Mechanical Estimating Software - Designed by an Estimator for Contractors H&K Equipment, Inc. www.hkequipment.com

www.americanbreakersca.com

We Sell, Lease, Rent & Service Forklifts, Lift

Atek Corporation www.atekcorporation.com Leading Provider Of Low Cost, High Quality Small Press Brakes Atlas Electric, Inc. www.atlaselectricinc.com Since 1987, We Have Been Providing Our Customers With Quality New, Used, Surplus & Rebuilt Electrical Equipment. We Carry A Large Inventory Of Circuit Breakers, Motors, Motor Controls, Switchgear & Transformers. In Addition, We Can Provide Custom Engineering, Manufacturing & Fabrication Of New Switchgear & Substations For All Industrial, Mining & Tunneling Applications Bearing & Drive Systems www.bdsbearing.com Buyers of Excess Bearing Inventory Bentec, Div. of Kiffer Industries, Inc. www.bentecbenders.com Providing Bentec Hydraulic Bending Machines, Which Provide Maximum Versatility At An Affordable Price. Each Bentec Bending Machine Is Designed & Built In Cleveland, Ohio

Providing Competitive Prices on Industrial, Commercial, and Residential Electrical Products Since 1982 Kanetec www.kanetec.com Manufacture of Magnetics Tools & Equipment Since 1959. Our Innovative Approach to Real World Problem Solving Makes us the Leader in

Upgrades. We Also Provide All Press-Related Services Magnetic Tooling Burr King www.burrking.com KBC Tools & Machinery

American Breakers Dealer & Distributor of Circuit Breakers

J&T Electrical Supply www.jtelectrical.com

Trucks & Other Material Handling Equipment Hi-Heat Co. www.hi-heat.com Buyers & Sellers of Ovens, Furnaces & Furnace Replacement Parts Innovative Rack & Gear www.gearacks.com Over 50 Combined Years of Gear and Gear Rack Experience Allows Us to be Your Quality Source Gears And Hard-Cut And Soft-Cut Gear Racks.

We service The Oil, Defense, Steel, Marine, Automation, Machine Tool, Computer, Medical And Precision Instrument Industries Let Us Help You with Your Next Gear and Gear Rack Project Integrated Turbo Machinery, Inc. www.integratedturbo.com Integrated TurboMachinery Is A CriticalOperation Rotating Equipment Support Technologies Provider. We Specialize In The Sale & Repair Of Steam Turbines, Pumps, Compressors, Blowers & Gear Boxes.

www.kbctools.com or www.kbctoolsandmachinery.com kbctools.com – KBC Tools & Machinery is a Full-Line Industrial Distributor of Tooling & Machinery for The Metalworking Industry. Our Website has Everything you Need to Keep your Shop Running Smooth kbctoolsandmachinery.com – Metalworking Machinery, In-Depth Information, Everyyhing In One Place – Easy To Search – So You Can Quickly Find What You Need L&L Special Furnace Co., Inc. www.hotfurnace.com Manufacturer of Tool Room Furnace Model #GS1714; Features Include Easy Lift Door, Program Control, Dimensions 17”W x 14”D x 12”H Lazco Corp. www.lazcocorp.com Our Core Business Is Buying & Selling New, Surplus & Used HVACR Equipment, Parts & Compressors In The Global Air Conditioning Markets Lombard Metals www.lombardmetals.com Providing Used Provision Equipment Machine Tooling Technology www.mttkey.com Distributor Of New & Used Keyseater Tooling, Used Keyseaters, Mitts & Merrill (Limited Supply) MacMillin Hydraulic www.macmhydraulic.com Manufacturers of Pumps and Motor Mounts

We Also Offer Upgrades, Field Services, Skid-

MB Industrial Equipment, Inc.

Packaging & Engineering Services

www.mbequipment.com

International Marketing Specialists www.bondtech.net Designing, Engineering & Manufacturing All Types Of Autoclave Systems

We Buy & Sell Electrical Equipment Including DC Motors, AC Motors, DC Crane Shoe Brakes, DC Circuit Breakers, DC Contactors, DC Power Hoist Limit Switches

INTERNET DIRECTORY

www.impmagazine.com

June 30, 2016

30

FOR THE LATEST INFORMATION ABOUT OUR CURRENT ADVERTISERS’ PRODUCT OFFERINGS, CHECK OUT THEIR WEB SITE BELOW THE ADVERTISERS LISTED BELOW ARE LINKED ON THE INDUSTRIAL MARKET PLACE WEBSITE: WWW.IMPMAGAZINE.COM

Melmor Associates www.melmor.com We Buy and Sell Used Material Handling Equipment MH Containers and Equipment Co., Inc. www.mhcontainers.com Supplying All Types of Containers – Steel Containers, Wire Mesh Containers & Plastic Containers Mullen Circle Brand www.nimco-controls.com Blender of Lubricants & Metalworking Fluids Oxarc www.oxarc.com Providing Welding & Industrial Supplies, As Well As Specialty Gases Since 1968. Also Offering Emergency Repair Facility For Welding-Related Products

PanaVise www.PanaVise.com Manufacturer of Precision Vises-Circuit Board Holders-Work Holding Tools-Mini Arbor Presses - Mobile Electric MountsGPS Units-Satellite Radio Receivers-Mobile Video Screens - 2 Way Radios - Mobile Data Terminals. If It’s Mobile and Electronic, We Can Handle It Parker Boiler Co. www.parkerboiler.com

Powell Systems, Inc. www.powellsystems.com Providing Quality Steel Containers For Over 70 Years. We Provide The Most Comprehensive Line Of Standard & Custom Corrugated Steel Containers For Any Application Proserv Anchor Crane Group www.proservcrane.com Manufacturer of Overhead Cranes & Hoists.

Dedicated To Building The Precise Crane & Crane Infrastructure For Your Specific Needs Romac Supply www.romacsupply.com Buyers, Sellers & Renters Of Surplus Electrical Equipment Including Circuit Breakers, Transformers, Motor Controls, Motors, Bus Duct, Panelboards, Fuses and Substations. We Also Retrofit & Repair Electrical Equipment Row Electric Equipment www.rowelectrical.com Buyers & Sellers Of Used Industrial Electrical Equipment Royal Products

www.royalprod.com

Royal Products Is A Leading ISO-Registered Manufacturer Of Precision Metalworking Performance Accessories. One Of Our Primary Products Is The Royal Filtermist – A Low-Cost, Highly Efficient Mist & Smoke Collector Designed Parker Boiler Co. Is A World-Renowned Manufacturer Of Steam Boilers From 1.5 HP to 150 Specifically For The Metalworking Industry Salinger Electric Co., Inc. HP With Pressures To 250 PSI. We Manufacture www.salingerelectric.com

Direct-Fired Hot Water Boilers (Available As Gas, Oil, Propane or Combination-Fired) Ranging From 300,000 to 6,800,000 BTU, With Operating Temperatures To 400°F & Pressures To 300 PSI, Condensing Boilers 399,000 BTU to 5,433,000 BTU Up To 180° and 80 PSI. Our Indirect-Fired Water Heaters (Available As Gas Or PropaneFired) Range From 300,000 To 3,000,000 BTU Input, With Operating Temperatures To 190°F & Pressures To 150 PSI. We Manufacture High Termperature Thermal Liquid Heaters. We Also Are The Makers of Low NOx Steam & Hot Water Boilers & Burner Sytems Park Thermal www.parkthermal.com Manufacturers of New & Reconditioned Industrial Furnaces & Heat Treat Equipment Phase-A-Matic, Inc. www.phase-a-matic.com Phase Converters for Running 3-Phase Equipment On Single Phase Power

Buyers and Sellers of New and Remanufactured Electrical Equipment Schweiss Doors www.schweissdoors.com We Manufacture & Install Low-Maintenance Custom One-Piece Hydraulic Doors That Lift Up & Out To Form A Canopy When Open, & Patented Bifold Liftstrap / Autolatch Doors, Both Of Which Are Distributed Internationally. With Clean Aesthetics, Simple Installation & Smooth, Quiet Operation, Our Strong Steel or Aluminum Frame Architectural Engineered Designer Doors Accept Most Cladding Systems; Glass, Polycarbonate, Wood, Steel, Etc., & Schweiss Hydraulic & Electrical Operated Bifold Doors Come With Many Safety Features & Upgrade Equipment.

Finding The Right Custom Door For Any Application-Residential, Retail, Offices, Schools, Restaurants, Garage, Commercial, Industrial, Military, Hangars & More Is As Close As Your Telephone By Dialing 800-746-8273 Or By Visiting www.schweissdoors.com

Scotchman Industries www.scotchman.com Scotchman Industries’ “Metal Fabricating Solutions” Features: Hydraulic Ironworkers, From 45 To 150 Ton Capacity With Numerous Tooling Options, Punches & Dies and Custom Tooling Available; Circular Cold Saws (Manual To Fully Automatic, Pivot For Ferrous & Non-Ferrous Materials) With A Complete Selection Of Blades & A Blade Sharpening Service; Band Saws; Full Line Of Pipe Notchers: Manual, Electric & Abrasive Grinder/ Notchers & Scotchman Manual Measuring Systems & Programmable Feed & Stop Systems: Quick, Easy, Accurate Length Setting & Feed Systems Manual To Fully Automatic For All Types Of Machinery Southerntier Custom Fabricators, Inc. www.stcf.com World Class HVAC Air Handling Systems And Specialty Fabrications For The Commercial, Educational, Institutional And Industrial Marketplace.

STP Roto Machinery, Inc. www.stprotomachinery.com Manufacturing The Widest Range Of Machines For The Rotomolding Industry. Quality & Reliability Are Our Watchwords. Our Machines Are UserFriendly Sutton-Garten www.usedwelder.com Since 1918, Sutton-Garten Has Supplied the Finest in New, Used and Rental Welding and Cutting Equipment. All Machines Come with a Warranty and We Have a Great Selection of Miller and Lincoln Electrical and Engine Driven Welders and Hypertherm Plasma Cutting Equipment. Fume Collection Equipment is Also Available.

T&R Electric Supply www.t-r.com “THE TRANSFORMER PEOPLE” - We Buy, Sell, Rent, Repair & Deliver Distribution & Substation Transformers As Well As Related High Voltage Switchgear Versa Machinery www.versamachinery.com Manufacturer Of High Quality Cutters & Pullers For The Rubber & Plastic Extrusion Industries Walton Co. www.waltontools.com Walton Company Manufactures Tools For The Automotive, Plumbing & Mechanical Industries, Including Tap Extractors, Tap Extensions & REPS Pipe, Stud & Screw Extractors Weldship Corporation www.weldship.com Buyers and Sellers of Compressed Gas Cylinders, Tube Trailers, Cryogenic Storage Vessels (The) W.H. Kay Company www.whkay.com Inventory Of Used Heat Treating Furnaces & Industrial Ovens

AUCTIONS

(2) ONLINE AUCTIONS - INTERNET BIDDING ONLY MACKENZIE MACHINE AND DESIGN

WEDNESDAY, MARCH 28, 2018, 1:00 PM (ET) INSPECTION: Open House Inspection: Tuesday, March 27, 9 AM to 4 PM (local time) 26 Water Street • New Haven, Connecticut

Complete Plant Closure, Including: Machine Tools, Vertical Turret Lathes, Welding Equipment, Inspection Tooling, Plant Support, etc.

FEATURED ITEMS • • • • • •

Cincinnati Hydroshift Lathe, 19” x 120” Boyes & Emmes Lathe, 20” x 162” LeBlond Regal Lathe, 20” x 96” Lion Lathe, 20” x 36” American Lathe, 24” x 240” American Turnmaster Lathe, 17” x 60”

• • • • •

Heyligenstaedt Lathe, 30” x 84” (3) Bridgeport 1 HP Vertical Mills, Power Feed Morris Radial Arm Drill, 4’ Arm Miller Welder Model MP30A with Wire Feed KRW 40-Ton 4-Post Press

FLANAGAN INDUSTRIES

THURSDAY, APRIL 5, 2018, 1:00 PM (ET)

INSPECTION: Open House Inspection: Tuesday, April 4, 9 AM to 4 PM (local time) 25 Mill Street • Glastonbury, CT 06033

Surplus Equipment to the Ongoing Needs of Flanagan Industries, Including: Large Capacity Vertical Turret Lathes & Boring Mills, CNC Vertical Machining Centers, Metal Fabricating Equipment, Plant Support, etc.

FEATURED ITEMS • 118” Morando 2-Axis CNC Vertical Turret Lathe, VS-30, 118” T-Slotted Face Plate, 89” U/R, 5-Position Turret, Side Head (Manual), 100 HP Spindle Motor, Manual Pulse Generator, Fanuc 18iTB CNC Control Retrofit ‘09, Serial No. 695196 • 118” Morando 2-Axis CNC Vertical Turret Lathe, KN-30, 118” T-Slotted Face Plate, 89” U/R, 5-Position Turret, Side Head (manual), Trabon Lube, Coolant System, Bellow Way Covers, 100 HP Rebuilt Baldor Motor, Fanuc Red Cap Servo motors, Manual Pulse Generator, Fanuc 18iT CNC Control Retrofit ‘07, Serial No. 685160 • 49” Webster & Bennett CNC VTL, Series S, 82” Swing, 63” U/R, 49” 4-Jaw Chuck w/o Jaws, 84” Drilled and Tapped Face Plate, 5-Position Turret, Elevating Rail, GE Fanuc 16i-T CNC Control, Fanuc Red Capo Servos, Turbo Chip Conveyor, Hardened Ways, Steel Sliding Way Covers, Coolant System, 5.25-324 RPM, 75 HP Moto, New Table Bearing • Titan AFD-105 CNC Horizontal Boring Mill, X-72” , Y-81”, W-72”, Z-32”, 0-1600 RPM, 50 Taper, Fanuc Red Cap Servo Motors, 31.5” Tsudakoma CNC Rotary Table, (2) Right Angle Heads, 1-Spindle Support, 1/2 ton jib crane, Hardened Ways, Coolant System, Manual Pulse Generator, Fanuc 16M 4-Axis CNC Control, Serial No. 105 • 67” Sundstrand/Morando CNC Vertical Boring Mill, 67” T-Slotted Face Plate, 81” Swing, 63” U/R, Ram, 39” Ram Stroke, 12-Station ATC, Approx.

9-Tools, Fanuc GN10 Series CNC Control, Fanuc Yellow Cap Servos, Digital DC Drives (Eurothern 590 Series), Thru Tool Coolant System, 75 HP, Serial No. 126

• 220 Ton PIT 200/40SC Simerom Press Brake, 157” Bed, 96” 4-way die, 122” Between Housings, 11.82” Gap, 15.75” Open Height, Electric Foot Switch, 25 HP, 1998 • Niagara 6’-72 Pyramid Bending Rolls, 3/16” Cap, Drop End, Serial No. 57101 • 1/4” x 118” Simerom FGH 630 Hydraulic Plate Shear, Front Operated Back Gauge, 107” Squaring Arm, (3) 32.5” Support Arms, Electric Foot Switch, Serial No. 453, 1997 • 36” Bullard Vertical Turret Lathe, 34” 4-Jaw Chuck, 38” Drilled & Tapped Fixture Plate, Turret & Side Head w/ Turret, 200 RPM, Feeds .083-.125, 2-Axis Sony DRO, Scan-o-Matic Tracer, Coolant, Chip Guards, Threading, 25 HP Serial No. 13475 • Mazak V15N Vertical Machining Center, 24.5” x 48.5” T-Slotted Table, Tsudakoma RNCV-401R CNC Rotary Table, 30.75” Drilled and Tapped Fixture plate, 50 Taper, 30-Station ATC, Fanuc 6M CNC Control, Serial No. 49824 • Mazak V20 Vertical Machining Center, 29.5” x 69” T-Slotted Table, 31.5” Tsudakoma RNCV-801 CNC Rotary Table, 50 Taper, 40-Position ATC, Fanuc 6M Controls, Serial No. 45080 • Ikegai MX3 Table Type Horizontal Boring Mill, 72” x 72” T-slotted Table, 19.5” Tsudakoma RNCM-501R1 CNC Rotary table, 30-Station ATC, 40 Taper, X-39”, Y-24”, Z-12”, Fanuc 6M 4-Axis CNC Control, S/N 22241A • MUCH MORE!! TOO MUCH TO LIST!!

Sale Under management of:

Phone: (203) 458-0709

Thomas Industries, Inc.

Fax: (203) 458-0727 Email: gavel@thomasauction.com Web: www.thomasauction.com

2414 Boston Post Rd. Guilford, Connecticut 06437

Visit Our Website for Details - www.thomasauction.com