DECEMBER 25, 2025 – VOL. 75, ISSUE #26 • Toll-Free: 800-323-1818 • IMPMAGAZINE.COM
SINCE 1951...CONNECTING BUYERS AND SELLERS IN THE METALWORKING AND MANUFACTURING INDUSTRIES
The first thing to wear out on a CNC Machining Center is often the drawbar springs!
CLAMPRIT E Spindle Drawbar Force Gage
Protect Your Spindles
Belleville springs provide the only force that holds tools in the spindle while cutting, and they are often the first to wear out on a CNC Machining Center.
Avoid Unscheduled Downtime
Drawbars can have over 140 Belleville springs in the stack. Just the slightest wear, or one broken spring will have a huge effect on clamping force, causing chatter, bad finishes, reduced cutter life, and scrapped parts. Ball-type gripper
Pull-Stud
Increase Cutter Life Accuracy is Traceable to
NIST
Disc Springs
Patent #6533507
A typical drawbar assembly.
Uses any pull stud without alterations!
Left unchecked, a tool may eventually pull out of th spindle during a cut and damage the spindle, cutter, arbor, and fixture. Machines are never the same after a crash. Problems with repeatability, bad finishes, and short cutter life can be frustrating and difficult to diagnose. Up in the spindle and out of sight, drawbars seldom get the attention they deserve. To check it requires a special tool designed just for that purpose. Previously these tools cost many thousands of dollars, but now you can check your spindle for a fraction of that cost. The Clamprite Gage simulates a tool in the spindle, and checks the drawbar in less than a minute. It has no batteries, clumsy cables, or delicate electronics to burn out. The pressure gauge reads directly in pounds/force, so there are no conversions or calculations to perform. Thousands of shops in the U.S. and around the world use the Clamprite Gage. Customers often say it paid for itself the first time they used it.
Find out if your drawbar can still Clamprite! C L A M P R I TE
Patent #6813965 and other patents apply.
HSK-A63 with CG 5K Gage Head
KM 63
HSK Spindle Adapters
CHSK E25 Size E-25 Adapter $ 429.00 CHSK E32 Size E-32 Adapter $ 459.00 CHSK A40 Size A-40 Adapter $ 479.00 CHSK A50 Size A-50 Adapter $ 489.00 CHSK A63 Size A-63 Adapter $ 549.00 CHSK A80 Size A-80 Adapter $ 759.00 CHSK A100 Size A-100 Adapter $ 949.00 CHSK A125 Size A-125 Adptr. $1098.00
Clamprite Gage Kits provide the most economical method of checking the drawbar force of your machine. Kits are furnished in a foam fitted metal tool box and includes the gage head, a spindle adapter, and an internal transfer screw coupling (not shown) that accepts all pull studs. The universal gage head accepts all sizes and types of spindle adapters, incl. CAT, BT, ISO, HSK, CAPTO, and others. Select your kit by spindle type and maximum drawbar force you will be testing. Additional adapters sold separately.
Clamprite Gage Kits
CG3K 30B 3,000 Lb. CG3K 40C 3,000 Lb. CG3K 40B 3,000 Lb. CG5K 40C 5,000 Lb. CG5K 40B 5,000 Lb. CG5K 50C 5,000 Lb. CG5K 50B 5,000 Lb. CG5K 40/50 5,000 Lb. CG10K 50C 10,000 Lb. CG10K 50B 10,000 Lb.
HSK A100
HSK must maintain factory drawbar force to properly seat the arbor. CAPTO & HSK Spindles should be tested more frequently!
CG5K Gage Head for HSK-E25 to A63 and others $ 759.00 CG10K Gage Head for HSK-A80 to A100 and others $ 798.00 CG15K Standard Head for some HSK A100 / others $ 849.00 CG15K Heavy Duty Head for HSK-A125, CAT 60 etc. $1098.00
CG10K
CAPTO 6
includes BT 30 taper adapter $ 899.00 LONG TAPERS includes CAT 40 taper adapter $ 928.00 includes BT 40 taper adapter $ 928.00 includes CAT 40 taper adapter $ 928.00 includes BT 40 taper adapter $ 928.00 includes CAT 50 taper adapter $ 948.00 includes BT 50 taper adapter $ 948.00 incl CAT or BT 40 & 50 adptr. $1,117.00 includes CAT 50 taper adapter $ 975.00 includes BT 50 taper adapter $ 975.00
Clamprite Spindle Adapters
HSK A40
CA 20I CA 30B CA 35B CA 40C CA 40B CA 45C CA 45B CA 50C CA 50B CA 60C
ISO 20 Spindle Adapter BT 30 Spindle Adapter BT 35 Spindle Adapter CAT 40 Spindle Adapter BT 40 Spindle Adapter CAT 45 Spindle Adapter BT 45 Spindle Adapter CAT 50 Spindle Adapter BT 50 Spindle Adapter CAT 60 Spindle Adapter
$ 169.00 $ 155.00 $ 159.00 $ 169.00 $ 169.00 $ 179.00 $ 179.00 $ 189.00 $ 189.00 $ 639.00
CAPTO 03 CAPTO 04 CAPTO 05 CAPTO 06 CAPTO 08 KV 4540 KV 5045 KM 40 KM 63 KM 6350 KM 80 M6045
Other Spindle Adapters and Special Tooling Available
Call Clamprite for all your Drawbar Testing Needs! 21 Cygnet Drive, Carson City, Nevada 89706
Made in USA
Phone: 775 -246-5100 Fax: 775-246-5117
www.clamprite.com
NS - dar O I T AUC n Calen G N I om uctio TUR FEA nline A azine.c st O our mpmag plete li e e (S om ns) w.i ww more c auctio for a coming p of u
$ 469.00 $ 495.00 $ 529.00 $ 639.00 $ 849.00 $ 689.00 $ 779.00 $ 719.00 $ 819.00 $ 795.00 $ 895.00 $ 589.00
Call for Quote
Milwaukee, WI Permit No. 530
PAID
ATTENTION: MANAGER, BUY & SELL EQUIPMENT OR CURRENT POSTAL CUSTOMER
5940 W. Touhy Ave., Suite 300, Niles, IL 60714 • USA
PRESORTED STANDARD U.S. POSTAGE
(2) ONLINE www.DIAuctions.com AUCTIONS www.DIAuctions.com Merry Christmas and Happy New Year from DeCosmo Industrial Auctions! INDUSTRIAL MACHINERY AND EQUIPMENT AUCTIONS AUCTION #1
Auction Ends on: Wednesday, January 14th 2026 at 9:00am ET By Order of WORLD CLASS OEM AEROSPACE MFG.
Location: 169 Kennedy Road, Windsor, CT, 06095 • Inspection: By Appointment Only - Contact Tom Jr.
1000+ LOTS
CAMPBELL #930 CNC Creep Feed Grinder, (New 2016) BROTHER #S700X1 Speedio CNC Drill/Tap Center, BULLARD 54″ Cutmaster VTL, MITSUBISHI #MVS-20/15 “4-Axis” Bridge Mill, TRAK #DPM Vertical Milling Machine w/ KMX Control, OKUMA #LC40 CNC Turning Center, SIP Jig Borers, Lista, Vidmar & Durham Storage Cabinets, Clemco Blast Cabinet, PROCECO Typhoon S/S Rotary Washing Machine, SWECO & GIANT Vibratory Finishing Machines, GRUENBERG Oven, STARRETT Granite Surface Plates of all shapes and sizes, Inspection Tooling of all kinds, TRIMOS #TELIOS Swing Gage Setting Gage, Mitutoyo Surface Tester, CAT-50 & CAT-40 CNC Toolholders, Perishable Tooling of ALL Kinds, (3) TOYOTA FORKLIFTS (3-8k lbs. Cap.), GORBEL Modular Crane Systems, TENNANT #7100 Floor Scrubber, ERIEZ Portable Coolant Sump Sucker, Variety of Ingersoll Rand Air Compressors (Cap. 40-150HP) & SOOO MUCH MORE!!!
AUCTION #2
ONLINE AUCTION: ACE MACHINE, INC. Auction Ends on: Wednesday, January 28th 2026 at 11:00am ET
Location: 563 Route 111, East Hampstead, NH 03826 • Inspection: Tuesday, January 27th, 2026 (9:00 AM - 4:00 PM ET) HAAS #VF-5 CNC VMC, HAAS #VF-4 CNC VMC, HAAS #VF-3 CNC VMC, HAAS #VF-0E CNC VMC, HAAS #SL-20 CNC Turning Center, (Qty. 2) SHARP Vertical Milling Machine w/ Age 2 Control, TRAK #TRM CNC Milling Machine, CLAUSING Surface Grinder, KALAMAZOO Chop Saw, PEMSERTER, STARRETT Granite Surface Plates, BROWN & SHARPE #Micro-Hite 350, KAESER Air Compressor, Large Quantity of KURT Vises, CAT-40 CNC Toolholders, Inspection Tooling of ALL Kinds & SOOOO MUCH MORE!!!
VISIT OUR WEBSITE FOR MORE PICTURES AND DETAILS
DECOSMO INDUSTRIAL AUCTIONS P.O. Box 569 • Agawam, MA 01001 www.DIAuctions.com • 413-363-0857
FURNACES & OVENS WANTED CURRENT & PAST ISSUES - VISIT IMPMAGAZINE.COM
FOR SALE / WANTED
THE W.H. KAY COMPANY 1S9IN3CE The “Elder Statesman” of Used Ovens & Heat Treating Furnaces
6
OVER 150 IN STOCK…READY FOR INSPECTION & DELIVERY
We Buy/Sell/Trade Furnaces, such as:
Walk-In Ovens • Box • Pit Type • Belt • Atmosphere Generators • Box Type Draw • Internal Quench • Vacuum • Combustion Air Blowers For Complete Specifications and Pricing
Visit Our Web Site: Email: sales@whkay.com www.whkay.com
The W.H.
ay Company
30925 Aurora Rd. • Solon, OH 44139
440-519-3800 • Fax: 440-519-1455 WE BUY & SELL...NEW, USED AND SURPLUS ELECTRICAL EQUIPMENT
December 25, 2025
3
WE PAY INSTANT CASH
FOR UNUSED SURPLUS BEARINGS
We Buy All Types, Brands and Sizes of Bearings in any Size Lot. We Pay ALL The Freight. This is an excellent opportunity for your firm to realize an immediate return on the obsolete and excess bearings you no longer use.
Give us a call or send your list by E-mail or Fax...
If We Don’t Have It, We Will Find It
17719 N.E. Sandy Blvd. Portland, Oregon 97230 11900 Globe Street Livonia, MI 48150
All of Our Products are Load Tested and Come with a ONE YEAR Warranty Repair Services Are Available Utah Breakers & Supply Has Over 15 Years Experience In The Industry
brent@utahbreakers.com • 801-908-6557 www.utahbreakers.com
800-279-0992
Phone: (503) 231-0992 Fax: (503) 231-1190
E-mail: buyback@royalbearing.com
www.royalbearing.com
4
December 25, 2025
FOR SALE / WANTED
CURRENT & PAST ISSUES - VISIT IMPMAGAZINE.COM
SMOKING SHELTERS • ELIMINATE LITTER & LOITERING AT DOORWAYS • ELIMINATE 2ND HAND SMOKE • NUMEROUS SIZES AND STYLES • PREFABRICATED FOR EASY INSTALLATION
WWW.HANDI-HUT.COM
973-614-1800 CALL FOR A QUOTE
ELECTRIC MOTORS CONTROLS • TRANSFORMERS
– Bought and Sold – • AC & DC Motors • Disconnect Switches • Transformers • AC Motor Starters
We Sell Reconditioned or “Electrically O.K.” We Will Also Buy Your Spares! Contact:
MIST COLLECTORS
ROW ELECTRICAL EQPT.
800-248-4479 • FAX: 419-244-8887 E-mail: sales@rowelectrical.com Website: rowelectrical.com
Connecting Buyers and Sellers since 1951
AUCTIONS
CURRENT & PAST ISSUES - VISIT IMPMAGAZINE.COM
December 25, 2025
5
WEDNESDAY, JANUARY 14, 2026 @ 10:00AM 3015 BEECHTREE DRIVE, SANFORD, NC 27330
ONLINE BIDDING PROVIDED BY BIDSPOTTER
This auction is the complete liquidation of all the equipment, machinery, vehicles, and inventory from a large metal fabrication and machining facility in Sanford, NC. This large manufacturing facility specialized in machining, fabrication, welding, laser cutting, welding, and metal reshaping. This auction will be held live on location at the facility located at 3015 Beechtree Drive in Sanford, NC with online bidding available on select larger items. FABRICATION • HAAS VF-5/40 CNC machine (2011) • HAAS VF 2B CNC machine, 20 HP Vector Drive (2002) • HAAS VF 0 CNC milling machine 710 IPM (1996) • HAAS VF OE CNC machine 15 HP 710 IPM (1997) • HAAS UF-2 ST 10 CNC machine (2018) • VICTORY PLASMA V510 system with Thermal Dynamics ultra cut 200 • BESCUTTER Accu-Star 3000 fiber laser w/water chiller and computer • KNUTH hydraulic press brake serial AHKF32160CNC (2011) • KNUTH KHTA3206 shear • GEKA HYDRACORP 70-S iron worker • BAILEIGH metal horizontal band saw with rollers • RONG FU INDUSTRIAL heavy metal cutting saw • BAILEIGH metal cutting saw model BS-360SA with rollers • ELLIS metal cutting band saw • ELLIS drill press • ENTERPRISE - L lathe model EL-2
• VECTRAX milling machine model GS20V WELDING FORKLIFTS & • BRIDGEPORT milling machine • MILLER Maxstar 161 STL welder EQUIPMENT • BRIDGEPORT milling machine (old) • MILLER Coolmate 1.3 cooler • Sky Trak 10054 telehandler • SPX power team punch • MILLER Dynasty 210 welder • Cat T80D forklift propane • JET sander/grinder • MILLER Millermatic 255 welder hard tire • JET drill press • MILLER Econotig power source • TCM 5000lb forklift FG25N2 • JET 18” wood band saw • CAT hard tire forklift, old • MILLER Shopmaster 300 welder • TRINCO sand blaster (appears to be out of service) • MILLER Millermatic 252 welder • TENNSMITH 18-gauge hand brake • MILLER Millermatic 252 welder • forklift fork boom extension lift • NORTHERN 4’ finger brake • MILLER Trail Blazer 302 on trailer • 500lb crane system with Anver • ROCKFORD vertical sander sheet metal clamp • MILLER Legend NT welder on trailer • CRAFTSMAN table saw 1897 hours • tilt hopper for scrap metal • STANBRIDGE ISO 9000 granite table • LINCOLN Tig 200 square wave welder • dump hoppers • ROCKWELL hardness tester model HR 150A • LINCOLN LN - 742 wire feeder • pallet jacks • arbor press • LINCOLN Invertec STT II welder • torch kit • pedestal grinders & belt sanders OTHER ITEMS • 3-phase converter • Shop tables, stands, shelving, bolt/part bins, cantilever metal racks, shop • 4’ roll former fans, metal roll-around carts, shelving, (2) 20’ Connex shipping containers
COMPLETE DETAILS, PICTURES, CATALOGS, TERMS & CONDITIONS AVAILABLE ONLINE AT WWW.COUNTRYBOYSAUCTION.COM AND WWW.BIDSPOTTER.COM/EN-US/AUCTION-CATALOGUES/BSCCOU 1211 W. Fifth St., P.O. Box 1903, Washington, NC 27889
252-946-6007 or 800-849-6007 Fax: 252-946-0460 • NCAL 765
ONLINE BIDDING BY BIDSPOTTER
AUCTIONS
COMPLETE METAL FABRICATION FACILITY AUCTION ON LOCATION AUCTION - SANFORD, NC
AUCTIONS
6
December 25, 2025
AUCTIONS
CURRENT & PAST ISSUES - VISIT IMPMAGAZINE.COM
MARK MCGHEE ESTATE HVAC & MORE AUCTION
NRG REALTY GROUP
This is a live auction with a few lots Simulcast live and Online.
Saturday, January 10, 2026 @ 09:00 AM 500 E 2nd N St., Mt Olive, IL
Check our Website for More Details https://mollettauctions.com
Industrial on 6+/- Acres View 11-2pm Friday January 9 & 16 OZONA, TX • 598 TX-163 14,800+/-sf industrial property built on 6+/-ac in 2013. Main building has 26’ clear height. 5,600+/-sf of office space including offices, meeting rooms, training room, and lab area. Attached warehouse is 9,200+/-sf and includes four (4) drive through bays, a 12.5 ton crane, 3-phase power, and air/lube/oil lines. Additionally, there is a 5,575+/-sf drive through wash bay. Property is connected to city water and located just 1.5 miles south of Ozona and I-10. Nominal Opening Bid: $725,000
Bid Online Jan 26 - 28 at auctionnetwork.com Prefer Not to Wait for the Auction? Submit a Pre-Auction Offer!
800.801.8003 • williamsauction.com/TX TX NRG REALTY GROUP, LLC, LIC. NO. 9004023; JUSTIN CHRISTOPHER DODD, LIC. NO. 601010 TX KEITH W. BABB AUC LIC 6701. 5% BUYER’S PREMIUM.
DO YOU BUY EQUIPMENT AT AUCTIONS? MOLLETT AUCTION SERVICE
618-690-2109 Email: wamollettauctions@yahoo.com Web: www.mollettauctions.com
Check our Website for the latest in Auction Advertising
www.impmagazine.com
AUCTIONS
CURRENT & PAST ISSUES - VISIT IMPMAGAZINE.COM
ONLINE ONLY AUCTION
December 25, 2025
7
VEHICLES AND EQUIPMENT AUCTIONS
ENDS: JANUARY 6, 2026 6851 MADISON AVE., INDIANAPOLIS, INDIANA 46227 Preview will be the Monday before the auction closes from 1-2pm
This auction will feature items from local estates and consignments of Vehicles, Equipment, Lawn and Garden, and More. 15% Buyer Premium Added to the Final Bid Price Plus 7% IN Sales Tax Any invoice total exceeding $2,500 or titled vehicles MUST be paid via cash, wire transfer, or prior arrangements with Christy’s. All payments are final. NO REFUNDS ALLOWED All items sold AS-IS. All must be paid for and picked up by Noon, the Thursday Following the auction. There will be no loading help on the containers. Transporters info is located under the “Removal Times” button Christy’s only has a small forklift onsite. We cannot move or load any large equipment over 5k lbs, or storage PODS.
Go To Website - www.christys.com For Complete Details
CHRISTYS OF INDIANA, INC. 6851 S. Madison Avenue Indianapolis, IN 46227 AH2930005
317-784-0000 • info@christys.com www.christys.com
DECEMBER 25, 2025
VOLUME 75, NO. 26 Since 1951, Industrial Market Place has proven to be a trusted meeting place for the industrial community. By expanding your market, we create new opportunities for buyers and sellers of machinery and industrial equipment.
GAVIN TOOLS AND LUMBER AUCTION TOOLS – LUMBER – DOORS – WINDOWS SUNDAY, JANUARY 4, AT 8:00 AM 16746 Chicago Rd, Sandwich, IL GAVIN AUCTIONS ARE HELD THE FIRST SUNDAY OF EACH MONTH
Tools & Misc Items begin at 8:00 A.M. • Trim & Moulding begin at 9:00 A.M. Lumber begins at 12:00 P.M. • Doors & Windows begin at 1:00 P.M. Restrooms/Food/Weather Shelter provided.
INDUSTRIAL MARKET PLACE
INTERNATIONAL SALES PUBLISHER Joel Wineberg x204 REPRESENTATIVES 5940 W. Touhy Ave., Suite 300, Niles, IL 60714 ART/PRODUCTION DIRECTOR Dave Ernst x213 Ashur Mikael Jon Schneider x214 For Advertising Information, Call Toll-Free: DATA ENTRY Dan Tepperman x223 800-323-1818 Ashley Chrzan x218 Vince Merced x216 (From United States & Canada) Bob Olsen x209 847-676-1900 • Fax: 847-676-0063 FOUNDER ASSOCIATE PUBLISHER website: www.impmagazine.com Henry J. Wineberg Jeremy Solomon x202 e-mail: info@impmagazine.com (1906 - 1983)
PHOTOS >> https://gavinauctionservices.com/inventory
Gavin Auctions 815-405-9988 AuctionZip Auctioneer ID # 22594
AUCTIONS
8
December 25, 2025
CURRENT & PAST ISSUES - VISIT IMPMAGAZINE.COM
ARE YOU LOOKING FOR MACHINERY? Use
Machinery Listing Services’
FREE LOCATING SERVICE Call Toll-Free
(800) 323-1818 or
Visit Us On The Internet:
www.machinerylisting.com
AUCTIONS
AUCTIONS
December 25, 2025
CURRENT & PAST ISSUES - VISIT IMPMAGAZINE.COM
Additional Trade Show Readership n Over 25,000 Weekly Online Readers n Bi-Weekly Newspaper...Since 1951 - Issued 26X Per Year - Timely Distribution and Competitive Rates - In-House Professional Graphic Designers to Assist You with Your Ad Copy n
Long Time Advertisers and Names You Can Trust • Bid Spotter • Federal Knife • Scotchman Industries • Proxibid
• Burr King Mfg. Co. • Romac Electric • Hydraulex • Heim Rousselle
• Myron Bowling Auctioneers • KHK Gears • Kalamazoo Metal Muncher • Accudyne
• Eastern Electrical Liquidators • T&R Electric • Cole-Tuve
CALL FOR RATES & DEADLINES – 800-323-1818 Connecting Buyers and Sellers in the Metalworking Industry...Since 1951
SINCE 1951 ...CONNECTING BUYERS AND SELLERS IN THE METALWORKING AND MANUFACTURING INDUSTRIES
www.impmagazine.com • Toll-Free: 800-323-1818
AUCTIONS
LET US HELP YOU MARKET YOUR EQUIPMENT TO OUR 117,000 READERS!!!
9
AUCTIONS
10
December 25, 2025
AUCTIONS
CURRENT & PAST ISSUES - VISIT IMPMAGAZINE.COM
FOR 75 YEARS, INDUSTRIAL MARKET PLACE HAS HAS HELPED HELPED THESE BIDDERS AND AND BUYERS! BUYERS! THESE AUCTIONEERS – AND HUNDREDS MORE – REACH BIDDERS
Gerlach Companies, Inc. Gerlach Companies, Inc.
UPCOMING AUCTIONS ONLINE
JAN 13 • 10AM CT
ONLINE
Surplus Machinery Due to Plant Consolidation of an OEM Firearms Manufacturer
JAN 20 • 10AM CT
Former Assets of Premier Tillage - Agricultural Blade Plow & Tillage Tool Manufacturer
2017
Lincoln, NE
FEATURING:
2007 TOYODA FH450S HMC; 2006 HYUNDAI KIA SKT21LMS, (2) 2007 HARDINGE GS250L, 2007 HARDINGE GS 200/66 Turning Centers; SUNNEN STH-2000LJEM-074 Horizontal Hone; PIONEER H-1560A Horizontal Broach; Conventional Machine Tools; 2009 ELECTROX Laser Marking System; SUNNEN Magnetic Particle Inspection System; Tool Presetters; Transformers; Tooling; Granite Work Tables; & More
WEBCAST
FEB 10 • 10AM CT
Superior Tube Products – Metal Tube Fabrication & Bending Facility
Quinter, KS
FEATURING:
New as 2017 HURCO CNC Machines; (2) 2016 YASKAWA Weld Cells; 2015 CONTROLLED AUTOMATION PlasMAX CNC Plasma; Fabrication; Machining; Welders; Double Door Paint Booths; PETERBILT, FREIGHTLINER & KENWORTH Trucks; 2016 ROADRUNNER 35 Ton Lowboy; (2) KUBOTA Track Loaders; (5) TOYOTA & HYSTER Forklifts; Farm Tractors; Plant Support; Structural Steel; & More
ONLINE
FEB 11 • 10AM ET
Complete Plant Closure – Progress Rail Fuel Injection Manufacturing Facility
2011
Davenport, IA
FEATURING:
2014 MAZAK 3D Fabri Gear 400 II 16” Tube Laser; 2011 ALTAMAR LT2410-PRC2500 6.5” Tube Laser; 2022 YLM 6” CNC Tube Bender; PINES, EAGLE, HORN, and EATON LEONARD Tube Benders up to 6” w/ Bendpro Controls; (3) 5-Axis Sheet Lasers New as 2005; HAAS CNC Machines; VIZIENT Weld Cells New as 2016; Band Saws; OBI Presses; CAT, CLARK, & NISSAN Forklifts; Plant Support; & More
Naples, FL
FEATURING:
(11) OKUMA, MAZAK, NAKAMURA TOME & HARDINGE Turning Centers - New as 2015; (4) CITIZEN CNC Swiss Lathes; (4) OKUMA & HAAS VMCs; 2007 DMG MORI NH5000 DCG HMC; (8) STUDER, MITSUBISHI, MICRON & UVA CNC Grinders; 2015 SUNNEN SV-1015-22 Vert. Hone; EXTRUDE HONE High Flow Process and Testing Machine; 2014 HEXAGON 5.7.5 CMM; Machine Tools; Forklifts; Cranes; and More
PRE-AUCTION OFFERS INVITED FOR MAJOR ASSETS
AUCTION CONTACT:
Jennifer Reiner • (847) 545-6374 jennifer@perfectionindustrial.com
www.perfection.global/auctions
CUSTOM MANUFACTURED SPRAY BOOTHS FACTORY DIRECT, AUTOMOTIVE, AEROSPACE & TRUCK SPRAY BOOTHS
Serving the United States since 1998, Paintbooth Pros, Inc. is wellknown for its commitment to excellent service and dedication to providing high quality Industrial & Automotive Paint Booths at an affordable price. Our VOC Containment system designs offer a full line of Heated Down Drafts, Semi Down Drafts and Sidewall Exhaust Systems customized to fit your individual needs. Why buy a boilerplate paint booth when the highly experienced technicians from Paintbooth Pros will design and build your booth around your shop.
LONG LASTING DEPENDABILITY THAT YOU CAN TRUST! GUARANTEED! 1-800-992-2927 • 440-653-3982 Email: paintboothpros@gmail.com www.paintboothpros.com Installation & Fire Up By Factory Personnel
Paintbooth Pros