Top Bin Aeration Pad (Flow Aid) | INDPRO Engineers

Top Bin Aeration Pad (Flow Aid) www.indproengineers.com

Aeration Pad (Flow Aid) The Model AD is an Aeration Pad or diffuser that is used to provide a means of introducing low pressure air into a dry bulk material that has become compacted due to settling. The air will help restore the material's natural ability to flow.

www.indproengineers.com

WHY IS IT Important?

The Model AD Aeration Pad helps restore material flow without the sometimes damaging effects of vibration or more expensive and complicated flow systems. The pads use a minimum amount of air (typically 6.5 cfm at 3 psi).

www.indproengineers.com

Models Available Model

Description

Net Weight Lbs.

Price US Funds

AD-C

Zinc plated steel body with galvanized steel mesh and cotton diffuser. With brass nipple and lock nut, stainless steel spacer washers, and sealing gasket (rubber washer).

0.7

$25.00

AD-F

Same as above but with fibreglass diffuser. Recommended when temperatures exceed 200°F (600°F max).

0.7

$26.00

AD-SSC

Type 316 stainless steel body and mesh with cotton diffuser.

With stainless steel spacer washers, nickel plated nipple and lock nut, and sealing gasket (rubber washer).

0.7

$38.00

AD-SSF

Same as AD-SSC but with fiberglass diffuser.

Recommended when temperatures exceed 200°F (600°F max).

0.7

$40.00

AD-K

Optional mounting kit includes two positive rectangular sealing gaskets, adapter, and clamp. Use with any of the above aerators when mounting from outside the bin.

0.6

$14.36

www.indproengineers.com

Technical Specifications  The standard material of construction includes a zinc plated steel body with galvanized steel mesh and a cotton diffuser.  Standard units have a temperature rating of 200°F (93ºC).  The high temperature version's materials of construction include a zinc plated steel body with a galvanized steel mesh and a fiberglass diffuser.  Fiberglas diffuser units have a temperature rating of 600°F (315ºC).  The unit is mounted on the bin wall by drilling a 7/16" diameter hole to allow the pipe nipple to pass through. Tank nipple connection is 1/8" NPS.  Optional "external mounting kits" install using a 2-5/8" x 6-3/8" cutout on the bin wall. The installer does not need to enter the bin or vessel.  Both the cotton diffuser and fiberglass diffuser are available with 316 S.S. body and mesh

www.indproengineers.com

About Comapny INDPRO Engineers is leading Vibratory Bin Aeration Pad Equipment Manufacturer in India offer offers all kinds of Industrial vibratory equipment. INDPRO Engineers Vibratory Jumbo Bag uploading station or FIBC Discharge station is simple equipment for effective flow promotion of stored bulk solids.

www.indproengineers.com

Contact Us 11 Avantika Nagar, Sector A, Sanwar Road Industrial Area, Indore www.indproengineers.com 9826507624

indproengineers@gmail.com

www.indproengineers.com

Thank You Present By INDPRO Engineers

www.indproengineers.com