MCMT Open Courses

INSPIRING ENGINEERS FOR A CHANGING WORLD

SHAPINGFUTURES

APPRENTICESHIPS

TECHNICAL DEVELOPMENT

SAFETY COMPLIANCE

Marches Centre of Manufacturing and Technology [MCMT] operate two state-of-the-art manufacturing training facilities in Bridgnorth and Shrewsbury.

MCMT covers more than 40,000 sq ft of dedicated space designed with one vision in mind... to ‘Inspire Engineers for a Changing World.’

We are inspiring engineers by combining industry-trained assessors with the best equipment, traditional engineering expertise and the latest technology. With more than £5m spent on creating learning environments that will challenge individuals to fulfil their potential.

This includes access to a dedicated CNC Zone, advanced fluid and power controls and the latest robotics and metrology, not to mention dedicated electrical, heritage, vehicle trim and finish sections.

An Engineering Club has also been launched at MCMT Bridgnorth, which gives SMEs access to technology and production equipment that would usually be out of their financial reach.

A number of manufacturers are already taking advantage of these capabilities to develop prototypes, explore new processes and overcome production bottlenecks.

OUR FUNDERS The MCMT is part-funded by the European Regional Development Fund, Shropshire Council and the Marches LEP, through the Midlands Engine Growth Deal.

2

INSPIRING ENGINEERS FOR A CHANGING WORLD

QUALITY COMPLIANCE

CONTINUOUS IMPROVEMENT

LEADERSHIP & MANAGEMENT

BUSINESS SUPPORT

BOOKINGS & PAYMENTS Open courses can be booked by emailing sales@mcmt.co.uk, or by calling 01746 802079. We will require a Purchase Order along with the candidates’ details, including any particular requirements. Payments can be made by cash, card payment, BACS or can be invoiced but all courses need to be paid for prior to the course commencing as per our terms and conditions.

ENQUIRIES Please contact our advisors on 01746 802079 or email sales@mcmt.co.uk for all information regarding our courses and on-site training activities.

CANCELLATION POLICY MCMT reserve the right to cancel or postpone undersubscribed courses. However, customers will be given at least 7-days notice prior to the planned programme commencement date. We will endeavour to re-arrange the postponed courses to the earliest date possible.

O UR

R

TRAINING & BUSINESS SERVICES

PARTNE

n Below 7 days of the programme start date 25% of the course fee

TR A ING IN

Customer cancellations are accepted without charge up to 7-days prior to the commencement of the programme.

However, as per our terms of conditions, any cancellations being made within the 7-day period our cancellation fee structure applies unless agreed by a member of the In-Comm management team:

n 24 hours or less of the programme start date Full amount of the course

OPEN COURSES 2021

3

TECHNICAL DEVELOPMENT

MCMT has developed over 500 bitesize courses that will give your staff the technical knowledge and understanding to work in a modern-day manufacturing environment, improving your quality, cost and delivery performance in the process.

OPEN COURSES

BASIC HYDRAULICS Dates: March 11th,12th | June 17th, 18th | September 9th, 10th This programme looks at the basic hydraulic principles that underpin the operation of all hydraulic systems, which is reinforced by hands-on training on our practical rigs.

BASIC PNEUMATICS Dates: March 18th, 19th | June 24th, 25th | September 16th, 17th This pneumatic training course aims to familiarise delegates with the design, construction and operation of pneumatic components.

3D MODELLING & DRAWING – COMPUTER AIDED DESIGN (SOLIDWORKS) Dates: March 11th | June 10th | September 9th This 1 day course is designed as an Introduction to Solidworks. Learners will create Parts, Drawings and Assemblies .

CNC PROGRAMMING – FANUC TURNING Dates: April 15th-16th | July 22nd-23rd | October 21st-22nd A 2 day programme designed to benefit individuals who need an introduction to Fanuc Turning, programming G and M codes and canned cycles.

CNC PROGRAMMING – FANUC MILLING Dates: April 22nd-23rd | July 29th-30th | October 28th-29th A 2 day programme designed to benefit individuals who need an introduction to Fanuc Milling, programming G and M codes and canned cycles.

READING ENGINEERING DRAWING & GEOMETRICAL DIMENSIONING TOLERANCING Dates: March 25th | June 24th | September 27th A day programme designed for those wishing to read and understand engineering drawings moving through to gaining an appreciation for dimensioning & tolerancing.

INTRODUCTION TO METROLOGY: MEASURING INSTRUMENTS Dates: April 22nd | July 22nd | October 21st A day programme designed to give an introduction to instruments used within metrology and their use, errors in measurements along with traceability & calibration.

4

INSPIRING ENGINEERS FOR A CHANGING WORLD

TRAINING & BUSINESS SERVICES

AS COURSES BECOME FULL WE WILL ADD NEW DATES FOR FURTHER COURSES - PLEASE REFER TO OUR WEBSITE FOR UP TO DATE COURSE DATES AVAILABLE

METROLOGY – MEASUREMENT & CALIBRATION Dates: April 29th | June 29th | October 28th A day programme moving on from an Introduction to Metrology, giving more in-depth knowledge of Metrology Systems, looking at Contrast Resolution, Precision, Accuracy, Uncertainty.

MATERIALS TESTING Dates: April 7th | July 7th | October 21st A one day course covering the different methods of testing materials.

10 DAY ELECTRICAL SAFETY Dates: Course 1: March 9th, 16th, 23rd | April 6th, 13th, 20th, 27th | May 4th, 11th, 18th Course 2: August 3rd, 10th, 17th, 24th | September 7th, 14th, 21st, 28th | October 5th, 12th The aim of this course is to provide solid foundations upon which the participant will be able to build and develop electrical skills.

18TH EDITION WIRING REGULATIONS Dates: May 25th-27th | July 19th-21st | October 26th-28th | December 7th-9th A 3 day training course for persons with responsibility for the design, installation or maintenance of electrical systems.

The course is designed for electrically trained engineers/craftsmen to attain a benchmark qualification relating to the 18th Edition IET Wiring Regulations.

OPEN COURSES 2021

5

TECHNICAL DEVELOPMENT ON DEMAND COURSES n

CNC BASIC TURNING – SIEMENS OR HEIDENHAIN CONTROLS

CNC BASIC MILLING – SIEMENS OR HEIDENHAIN CONTROLS n

n

ADVANCED CNC PROGRAMMING

n

HAND FITTING

n

MACHINING COMPONENTS

BY TURNING

MACHINING COMPONENTS

BY MILLING n

n

ADVANCED MATERIALS TESTING

n

METROLOGY

n METALLURGY FOR NON METALLURGISTS

ROBOTIC & AUTOMATION PROGRAMMING n

n

ADVANCED FLUID POWER

n

ADVANCED WELDING PRACTICES

n

CODED WELDING

n

ADVANCED COMPUTER AIDED DESIGN

n

THREE PHASE MOTORS

WIRING & TESTING ELECTRICAL EQUIPMENT AND CIRCUITS

n

ASSEMBLING & TESTING ELECTRONIC

CIRCUITS n

MAINTAINING ELECTRONIC

n

EQUIPMENT & SYSTEMS GENERAL ELECTRICAL & ELECTRONIC

n

ENGINEERING APPLICATIONS ELECTRIC DISCHARGE MACHINING

(EDM) WIRE ERODING

n

PROGRAMMABLE LOGIC CONTROL

n

5 DAY BASIC WELDING

n

APPRENTICESHIPS ENGINEERING OPERATIVE - LEVEL 2 MECHANICAL MANUFACTURING PATHWAY Start Dates: Available on Request For individuals working within a mechanical manufacturing engineering role which are key to the success of the Manufacturing and Engineering sector allowing employers to grow their business while developing a work force with the relevant skills and knowledge to enhance and sustain the sector.

ENGINEERING OPERATIVE - LEVEL 2 ELECTRICAL & ELECTRONIC PATHWAY Start Dates: Available on Request For individuals working within an electrical and electronic engineering role which are key to the success of the Manufacturing and Engineering sector allowing employers to grow their business while developing a work force with the relevant skills and knowledge to enhance and sustain the sector.

GENERAL WELDER (ARC PROCESSES) - LEVEL 2 Start Dates: Available on Request For individuals working with metals to create high-strength welds to work towards being considered a fully competent General Welder.

PIPE & PLATE WELDER - LEVEL 3 Start Dates: Available on Request For individuals who manually weld tubes and plates or plates and structural components to high standards of quality.

LEAN MANUFACTURING OPERATIVE - LEVEL 2 Start Dates: Available on Request For individuals working within the manufacturing industry carrying out work safely and to exacting quality standards; being responsible for carrying out quality checks and required to contribute, develop and support improvement using continuous improvement methods such as kaizen tools, process visualisation using lean principles and problem solving tools and techniques.

6

INSPIRING ENGINEERS FOR A CHANGING WORLD

TRAINING & BUSINESS SERVICES

AS COURSES BECOME FULL WE WILL ADD NEW DATES FOR FURTHER COURSES - PLEASE REFER TO OUR WEBSITE FOR UP TO DATE COURSE DATES AVAILABLE

ENGINEERING TECHNICIAN - LEVEL 3 Start Dates: Available on Request For individuals who need to take responsibility for the quality and accuracy of the work they undertake within the limits of their personal authority. To be able to demonstrate a core set of behaviours in order to be competent in their job role involving mechanical, electrical, electronic, electromechanical and fluid power components/systems.

HERITAGE ENGINEERING TECHNICIAN - LEVEL 3 Start Dates: Available on Request Heritage Engineering Technicians perform a vital role in the preservation, restoration, re-manufacture, service and repair of historic UK and international engineering achievements. The range of heritage sectors include veteran, vintage and classic; agricultural engineering, aviation, bus and coach, commercial vehicle, marine, military vehicle, motor cycle, motor vehicle and steam, working in organisations as diverse as Global Manufacturers, Museums and small operators to small voluntary groups and individual owners.

ENGINEERING MANUFACTURING TECHNICIAN - LEVEL 4 Start Dates: Available on Request For individuals to develop in order to provide specialist technical support for engineers, so that organisations can develop, produce or test new/existing products, processes or procedures to meet a customer specification in terms of quality, cost and delivery, as efficiently and effectively as possible.

AUTOMATION & CONTROLS ENGINEERING TECHNICIAN - LEVEL 4 Start Dates: Available on Request For individuals to work within cross sector industries such as manufacturing, logistics or utilities environments installing and maintaining hardware and software for automation systems.

OPEN COURSES 2021

7

SAFETY COMPLIANCE

OPEN COURSES AS COURSES BECOME FULL WE WILL ADD NEW DATES FOR FURTHER COURSES - PLEASE REFER TO OUR WEBSITE FOR UP TO DATE COURSE DATES AVAILABLE

As a responsible employer, you’ll want to provide your employees with a safe working environment and develop a positive health and safety culture within your organisation. The volume and complexity of today’s legislation and regulations have made this even more difficult, especially without access to specialist advice, support and training. We have developed a wide range of packages that will enable you to meet, maintain and surpass the required standards. These include the design and implementation of health and safety monitoring systems, conducting assessments of your procedures and training employees who are responsible for health and safety.

IOSH MANAGING SAFETY – 4 DAY COURSE Dates: March 24th, April 7th, 13th, 21st | June 3rd, 10th, 17th, 24th | September 16th, 22nd, 29th, October 7th | November 30th, December 7th, 14th, 21st A flexible accredited course designed to provide all managers with the confidence and enthusiasm to apply Health & Safety knowledge to the workplace.

IOSH FIRE SAFETY AWARENESS – 1 DAY COURSE Dates: March 26th | June 18th | October 22nd This course helps provide a basis for developing a culture of fire safety and prevention among the workforce.

AWARENESS OF FIRST AID FOR MENTAL HEALTH – HALF DAY COURSE Dates: March 12th | June 18th | September 17th | December 17th This course provides learners with the knowledge to recognise a range of mental health conditions, how to start a supportive conversation and when & how to signpost a person to seek appropriate professional help.

FIRST AID FOR MENTAL HEALTH – 1 DAY COURSE Dates: April 21st | July 15th | October 20th This course provides learners with the knowledge to recognise a range of mental health conditions, how to start a supportive conversation and when and how to signpost a person to seek appropriate professional help. Learners will know how to recognise and manage stress and understand the impact of substance abuse.

SUPERVISING FIRST AID FOR MENTAL HEALTH – 2 DAY COURSE Dates: March 29th-30th | June 23rd-24th | September 29th-30th This course provides learners with the knowledge to recognise a wide range of mental health conditions and learn about the support/ therapy provided by professional healthcare providers. They will know how to start a supportive conversation and when and how to signpost a person to seek appropriate professional help.

POWER PRESS (PUWER) REGULATIONS BASIC – 2 DAY COURSE Dates: March 3rd-4th | July 14th-15th | December 8th-9th The course is intended for power press tool setters and other personnel requiring training under the Provision and Use of Work Equipment Regulations 1998.

8

INSPIRING ENGINEERS FOR A CHANGING WORLD

TRAINING & BUSINESS SERVICES

POWER PRESS (PUWER) REGULATIONS REFRESHER – 1 DAY COURSE Dates: March 10th | June 22nd | December 15th The course is intended to refresh knowledge of the PUWER Regulations as applied to power presses and update individuals knowledge with current legal requirements as laid down by the Provision and Use of Work Equipment Regulations 1998.

FIRST AID AT WORK - 3 DAY COURSE Dates: January 12th, 19th, 26th | February 2nd, 9th, 16th | March 2nd, 9th, 16th | April 13th, 20th, 27th | May 12th, 19th, 26th | June 8th, 15th, 22nd | July 13th, 20th, 27th | August 17th, 24th, 31st | September 14th, 21st, 28th | October 12th, 19th, 26th | November 4th, 11th, 18th | December 14th, 15th, 16th The three day first aid at work training course provides the comprehensive set of practical skills needed by first aiders in most workplaces to become a confident first aider at work.

FIRST AID AT WORK CERTIFICATE - 2 DAY COURSE Dates: March 17th-18th | April 14th-15th | May 13th-14th | June 9th-10th | July 21st-22nd | August 25th-26th | September 22nd-23rd | October 27th-28th | November 16th-17th | December 21st-22nd The first aid at work certificate training course is a two day course which updates the first aid skills of those who need to renew their First Aid at work certificate.

EMERGENCY FIRST AID - 1 DAY COURSE Dates: February 17th | March 10th | April 28th | May 18th | June 17th | July 26th | August 11th | September 6th | October 4th | November 9th | December 2nd This one day course will help you meet your regulatory requirements if your risk assessment indicates that first aid training covering emergency protocols only, is sufficient for your workplace.

OPEN COURSES 2021

9

SAFETY COMPLIANCE

ON DEMAND COURSES Our services focus on your company requirements and can be provided on-site at your business or at one of our three Technical Academies.

Many of our programmes are accredited by safety organisations including; Institute of Occupational Safety & Health (IOSH), National Examination Board in Occupational

Safety & Health (NEBOSH), City & Guilds (C&G) and Road Transport Industry Training Board (RTITB). n n n

Consultancy Qualifications Courses

Whether you want an established course delivered at a venue of your choice or an entirely new training package crafted to your specific needs, we can help your organisation meet new challenges and fill the skills gaps in your workforce. Along with the topics as shown in our open course section we are able to offer bespoke training in a number of different topics such as: n

HEALTH & SAFETY CONTRACT

n

SAFE WORKING PRACTICES

n

RISK ASSESSMENT

n

ACCIDENT INVESTIGATION

MOBILE ELEVATED WORKING PLATFORMS

n

n

n

DIRECTORS HEALTH & SAFETY

ROLE OF THE HEALTH & SAFETY COMMITTEE n

n

FORK LIFT TRUCK COUNTERBALANCE OR REACH CONVERSION

MANUAL HANDLING

CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH

n

BANKSMAN

n

BRAKE PRESS

ABRASIVE WHEELS (PUWER) REGULATIONS

n

FIRE MARSHALL TRAINING

n

SLINGING

n

CRANE DRIVING & SLINGING

n

SAFE USE OF LADDERS & STEPS

n

SAFE USE OF GAS CYLINDERS

n

FACE FIT TESTING

n

WORKING IN CONFINED SPACES

n

NOISE & HEARING PROTECTION

n

n

FIRE EXTINGUISHER COURSE

n

FIRE RISK ASSESSMENT

n

APPRENTICESHIPS

AS COURSES BECOME FULL WE WILL ADD NEW DATES FOR FURTHER COURSES - PLEASE REFER TO OUR WEBSITE FOR UP TO DATE COURSE DATES AVAILABLE

SAFETY, HEALTH & ENVIRONMENTAL TECHNICIAN - LEVEL 3 Start Dates: Available on Request For individuals working with management and delivery teams to advise on the statutory health, safety and environmental requirements of the organisation.

BUSINESS FIRE SAFETY ADVISOR - LEVEL 3 Start Dates: Available on Request For individuals working with businesses to help them keep their premises safe from fire by offering advice and education to reduce risk.

10

INSPIRING ENGINEERS FOR A CHANGING WORLD

TRAINING & BUSINESS SERVICES

INSPIRING ENGINEERS FOR A CHANGING WORLD

OPEN COURSES 2021

11

QUALITY COMPLIANCE

Whether you are designing quality systems from scratch, auditing their effectiveness or training staff to operate them, we have a team of experienced industry professionals to support your quest for quality.

OPEN COURSES

ISO 9001:2015 QUALITY FOUNDATION - 1 DAY COURSE Dates: March 4th | June 1st | August 31st | December 6th This one day course is designed for individuals to gather the required knowledge to understand ISO 9001 and the basic concepts & terminology around Quality Management.

ISO 9001:2015 INTERNAL AUDITOR - 2 DAY COURSE Dates: May 10th-11th | July 28th-29th | November 10th-11th This two day course is designed to outline the skills and knowledge required to implement a successful audit based on ISO 9001:2015.

IATF 16949:2016 FOUNDATION - 1 DAY COURSE Dates: March 11th | June 8th | September 13th | December 2nd This one day course is designed for individuals needing to understand the business benefits of a process based management system and the requirements of IATF 16949.

IATF 16949:2016 INTERNAL AUDITOR - 2 DAY COURSE Dates: June 15th-16th | August 11th-12th | December 20th-21st This two day course is designed to provide the skills to plan, execute, report and positively follow-up corrective action for internal audits based on the requirements of IATF 16949.

5 DAY LEAN QUALITY PROGRAMME Dates: March 2nd, 9th, 18th, 22nd, 23rd | June 24th, July 1st, 8th, 15th, 22nd | September 2nd, 9th, 16th, 23rd, 30th This programme is designed to develop your team by equipping delegates with the lean tools to improve quality within the organisation.

12

INSPIRING ENGINEERS FOR A CHANGING WORLD

TRAINING & BUSINESS SERVICES

AS COURSES BECOME FULL WE WILL ADD NEW DATES FOR FURTHER COURSES - PLEASE REFER TO OUR WEBSITE FOR UP TO DATE COURSE DATES AVAILABLE

APPRENTICESHIPS

QUALITY PRACTITIONER - LEVEL 4 Start Dates: Available on Request For individuals to deploy effective Quality Practices in their responsible area to ensure organisations fulfil the contractual and regulatory requirements of their customers and other stakeholders

OPEN COURSES 2021

13

CONTINUOUS IMPROVEMENT

Continuous Improvement enables your employees to gain recognition for demonstrating their competence in delivering Quality, Cost and Delivery improvements in the workplace. Our training programmes deliver true competence and results through teaching knowledge and mentoring the learners through real-life commercial projects. We deliver levels 2, 3 and 4 in CI alongside a suite of bite size courses designed to upskill members of the team on targeted segments such as 8D, FMEA and SMED. Bespoke courses can be tailor made to your organisation’s requirements.

OPEN COURSES

LEAN SIX SIGMA FOUNDATION Dates: March 9th | June 7th | November 1st This one day programme introduces delegates to the basic knowledge and ideas behind Lean Six Sigma and explains why it has become a successful approach to organisational improvement.

LEAN SIX SIGMA YELLOW BELT Dates: April 26th-27th | August 18th-19th | November 11th-12th This two day programme is the first belt in the Lean Six Sigma series, giving a general introduction to principles and how to work as part of a team.

LEAN SIX SIGMA GREEN BELT Dates: April 28th-30th | August 25th-27th | November 13th-15th This three day programme is the second belt in the Lean Six Sigma series, combining the Yellow Belt giving an in-depth experience and confidence in applying Green Belt notions.

ON DEMAND COURSES n

BESPOKE COURSES

n

LEADING LEAN TEAMS

n

n

8D PROBLEM SOLVING

n

VALUE STREAM & PROCESS MAPPING

n

PRACTICAL PROBLEM SOLVING

n

PROCESS FLOW ANALYSIS

n

n

KAIZEN / CONTINUOUS IMPROVEMENT

n

POKA YOKE / ERROR PROOFING

n

n

5S WORKPLACE ORGANISATION

n

TOTAL PRODUCTIVE MAINTENANCE

n

VISUAL MANAGEMENT

n

SINGLE MINUTE EXCHANGE OF DIE

FLEXIBLE PRODUCTION SYSTEMS / LINE BALANCING n

n

TAKT, CYCLE & LEAD TIME

ROOT CAUSE ANALYSIS & ACTION PLANNING

MANAGING PROCESS PERFORMANCE MANAGING CHANGE & CONTINUOUS IMPROVEMENT LEADING BUSINESS PROCESS

ADVANCED PRODUCT QUALITY PLANNING (APQP)

EXCELLENCE

FAILURE MODE EFFECT ANALYSIS (FMEA)

n

n

STANDARD OPERATING PROCEDURES

MEASUREMENT SYSTEMS ANALYSIS (MSA)

n

LEAN OFFICE

n

STATISTICAL PROCESS CONTROL (SPC)

n

14

PROCESS (PPAP)

n

n

n

n

PRODUCTION PART APPROVAL

n

n

ISO 9001:2015 LEAD AUDITOR 5 DAY COURSE IATF 16949:2016 LEAD AUDITOR 5 DAY COURSE CONSULTANCY

INSPIRING ENGINEERS FOR A CHANGING WORLD

TRAINING & BUSINESS SERVICES

AS COURSES BECOME FULL WE WILL ADD NEW DATES FOR FURTHER COURSES - PLEASE REFER TO OUR WEBSITE FOR UP TO DATE COURSE DATES AVAILABLE

APPRENTICESHIPS LEAN MANUFACTURING OPERATIVE - LEVEL 2 Start Dates: Available on Request For individuals working within the manufacturing industry carrying out work safely and to exacting quality standards; being responsible for carrying out quality checks and required to contribute, develop and support improvement using continuous improvement methods such as kaizen tools, process visualisation using lean principles and problem solving tools and techniques.

IMPROVEMENT TECHNICIAN - LEVEL 3 Start Dates: Available on Request For individuals responsible for delivery and coaching of improvement activity within an area of responsibility, often associated with Lean and Six Sigma methodologies.

IMPROVEMENT PRACTITIONER - LEVEL 4 Start Dates: Available on Request For individuals working with a blend of Lean and Six Sigma, project and change management principles and tools to identify and lead the delivery of change across organisational functions and processes.

IMPROVEMENT SPECIALIST - LEVEL 5 Start Dates: Available on Request For individuals responsible for leading the deployment of improvement strategy, for training others and for providing broad and deep technical expertise in advanced and complex Lean and Six Sigma, Project and Change Management principles and tools to enable identification and delivery of improvement opportunities aligned to key business goals.

IMPROVEMENT LEADER - LEVEL 6 Start Dates: Available on Request For individuals responsible for developing improvement strategy, providing leadership in improvement for the business and for coaching and supporting Improvement Specialists in advanced analysis

OPEN COURSES 2021

15

LEADERSHIP & MANAGEMENT

OPEN COURSES AS COURSES BECOME FULL WE WILL ADD NEW DATES FOR FURTHER COURSES - PLEASE REFER TO OUR WEBSITE FOR UP TO DATE COURSE DATES AVAILABLE

The effectiveness of managers, supervisors and team leaders has a direct effect upon the bottom line performance of any organisation and its ability to improve productivity. Working with the Institute of Leadership & Management, MCMT has developed a host of internationally recognised qualifications that will update your leader’s and manager’s skills, with development programmes tailored to suit the exact needs of your business.

ILM LEADERSHIP & TEAM SKILLS LEVEL 2 Dates: Course 1: March 22nd, 29th | April 14th, 21st, 28th | May 4th, 11th | June 1st Course 2: June 7th, 21st | July 5th, 13th, 20th, 26th | August 2nd, 23rd Course 3: October 4th, 11th, 19th, 26th | November 1st, 8th, 16th, 23rd A programme designed to help team leaders identify the key differences between working within a team and assisting in the supervision of a team, providing them with the practical tools in which to support their development.

ILM PRINCIPLES OF LEADERSHIP & MANAGEMENT LEVEL 3 Dates: Course 1: April 22nd, 29th | May, 20th, 27th | June 3rd, 10th, 17th, 24th Course 2: July 15th, 22nd, 29th | August 5th, 12th, 19th, 26th | September 2nd Course 3: October 14th, 21st, 28th | November 4th, 11th, 18th, 25th | December 2nd A programme designed for new and aspiring junior managers, picking up core skills and understanding needed to deal with management responsibilities and develop as leaders.

ILM LEADERSHIP & MANAGEMENT LEVEL 5 Dates: September 15th, 22nd, 29th | October 6th, 12th, 19th, 26th | November 4th, 11th, 18th A programme is designed for project managers, department heads, and other practising middle managers. Develop your skills and experience, improve your performance and prepare for senior management responsibilities

APPRENTICESHIPS TEAM LEADER/SUPERVISOR - LEVEL 3

Start Dates: Available on Request A programme for those in a first line management role, with operational/project responsibilities or responsibility for managing a team to deliver a clearly defined outcome.

OPERATIONS & DEPARTMENTAL MANAGER - LEVEL 5

Start Dates: Available on Request A programme for those who manage teams and/or projects, and achieving operational or departmental goals and objectives, as part of the delivery of the organisation’s strategy.

16

INSPIRING ENGINEERS FOR A CHANGING WORLD

TRAINING & BUSINESS SERVICES

ON DEMAND COURSES n

SATISFYING CUSTOMER REQUIREMENTS

DEVELOPING SELF AS AN EFFECTIVE TEAM MEMBER n

INDUCTION & COACHING IN THE WORKPLACE n

USING RESOURCES EFFICIENTLY & EFFECTIVELY n

n UNDERSTANDING MARKETING FOR MANAGERS

PLANNING CHANGE IN THE WORKPLACE n

n

WRITING FOR BUSINESS

CONTRIBUTING TO INNOVATION & CREATIVITY n

n

DEVELOPING YOURSELF & OTHERS

n FINANCE FOR NON-FINANCIAL MANAGERS n

DEVELOPMENT OF A STRATEGIC PLAN

n

MANAGE STRATEGIC CHANGE

PROMOTION OF EQUALITY OF OPPORTUNITY, DIVERSITY & INCLUSION n

n DISCIPLINE & GRIEVANCE MANAGEMENT n PREPARE FOR & SUPPORT QUALITY AUDITS n

MANAGE A BUDGET

RECRUITMENT, SELECTION & INDUCTION PRACTICE

n

PLANNING & MONITORING WORK

n

DEVELOPING THE WORK TEAM

n UNDERSTANDING EFFECTIVE TEAM WORKING n UNDERSTANDING CHANGE IN THE WORKPLACE n

WORKPLACE COMMUNICATION

n

LEADING YOUR TEAM

n UNDERSTANDING INNOVATION AND CHANGE n

n UNDERSTAND HOW TO IMPROVE PERFORMANCE n

UNDERSTAND STRESS MANAGEMENT

n

MANAGE WORK BASED PROJECTS

n

PLANNING & ALLOCATING WORK

UNDERSTANDING TRAINING & COACHING IN THE WORKPLACE n

SOLVING PROBLEMS & MAKING DECISIONS n

PROBLEM SOLVING AND DECISION MAKING n

CONTRIBUTE TO THE DEVELOPMENT OF A STRATEGIC PLAN n

n

DEVELOPING SELF AS A TEAM LEADER

IMPROVING THE PERFORMANCE OF THE WORK TEAM

n MANAGE PRODUCT AND/OR SERVICE DEVELOPMENT n MANAGE STRATEGIC MARKETING ACTIVITIES n DEVELOP AND MAINTAIN PROFESSIONAL NETWORKS n DEVELOP AND IMPLEMENT AN OPERATIONAL PLAN n ENCOURAGE LEARNING AND DEVELOPMENT n DISCIPLINE AND GRIEVANCE MANAGEMENT n DEVELOP WORKING RELATIONSHIPS WITH STAKEHOLDERS n

MANAGE A TENDERING PROCESS

n

MANAGE PHYSICAL RESOURCES

MANAGE THE IMPACT OF WORK ACTIVITIES ON THE ENVIRONMENT n

n PREPARE FOR AND SUPPORT QUALITY AUDITS n

DESIGN BUSINESS PROCESSES

MANAGE A BUDGET

n

n

n

MANAGE STRATEGIC CHANGE

MANAGE A PROJECT

n

n

PROVIDE LEADERSHIP & MANAGEMENT

n

n MANAGE REDUNDANCY & REDEPLOYMENT

UNDERSTANDING LEADERSHIP

n DEVELOP AND MANAGE COLLABORATIVE RELATIONSHIPS WITH OTHER ORGANISATIONS

ESTABLISH BUSINESS RISK MANAGEMENT PROCESSES n

PROMOTE EQUALITY OF OPPORTUNITY, DIVERSITY & INCLUSION n

n

OPEN COURSES 2021

MANAGE BUSINESS RISK

MANAGE KNOWLEDGE IN AN ORGANISATION n

n RECRUITMENT, SELECTION AND INDUCTION PRACTICE n MANAGE REDUNDANCY AND REDEPLOYMENT

17

BUSINESS SUPPORT AS COURSES BECOME FULL WE WILL ADD NEW DATES FOR FURTHER COURSES - PLEASE REFER TO OUR WEBSITE FOR UP TO DATE COURSE DATES AVAILABLE

ON DEMAND COURSES n

ICT – MS WORD BASIC

n

LEAN OFFICE

n

EXCEL ADVANCED

n

ICT – MS EXCEL BASIC

n

USE OF SOCIAL MEDIA IN BUSINESS

n

PRESENTATION SKILLS

n

ICT - INTERNET SAFETY & EMAIL

n

TEAM BUILDING

n

n

ICT – MS POWER POINT

n

ICT – MS ACCESS

n

ICT – MS PROJECT

n

ICT – MS TEAMS

INTRODUCTION TO SALES & MARKETING

XERO CLOUD LEDGER, MANAGEMENT ACCOUNTS & VAT RETURN

n

XERO PAYROLL

n

n

INTRODUCTION TO FINANCE

n

ENVIRONMENTAL AWARENESS

SAGE NOMINAL LEDGER, MANAGEMENT ACCOUNTS & VAT RETURNS

NEGOTIATING SKILLS

n

SAGE SALES & PURCHASE LEDGER

n

n

ICT – MS ONENOTE

n

BULLYING & HARASSMENT

n

ICT – MS OUTLOOK

n

n

GENERAL HOUSEKEEPING &

n n

SAGE REPORT DESIGNER WORKSHOP

n

PROFESSIONAL IMAGE

XERO CLOUD ACCOUNTING AN INTRODUCTION

INTRODUCTION TO HUMAN RESOURCES n

n

COMMUNICATION SKILLS

n

SAGE STOCK CONTROL

SAGE SALES & PURCHASE ORDER PROCESSING MODULES

n

GRAMMAR, SPELLING & PUNCTUATION

n

WORD INTERMEDIATE

n

SAGE - EXCEL INTEGRATED REPORTING

n

WRITING FOR BUSINESS

n

WORD ADVANCED

n

SAGE - REPORTS DESIGNER

n

TIME MANAGEMENT

n

EXCEL INTERMEDIATE

n

SAGE PAYROLL

APPRENTICESHIPS

BUSINESS ADMINISTRATOR - LEVEL 3 Start Dates: Available on Request For individuals to learn responsibilities of the role in order to support and engage with different parts of the organisation and interact with internal or external customers. With a focus on adding value, the role of business administrator contributes to the efficiency of an organisation, through support of functional areas, working across teams and resolving issues as requested. The flexibility and responsiveness required allows the apprentice to develop a wide range of skills.

CUSTOMER SERVICE PRACTITIONER - LEVEL 2 Start Dates: Available on Request For individuals to provide customer service products and services for businesses and other organisations including face-to-face, telephone, digital and written contact and communications.

CUSTOMER SERVICE SPECIALIST - LEVEL 3 Start Dates: Available on Request For individuals whose main purpose is to be that of a customer service specialist as a ‘professional’ for direct customer support within all sectors and organisation types. To advocate Customer Service and acts as a referral point for dealing with more complex or technical customer requests, complaints and queries.

18

INSPIRING ENGINEERS FOR A CHANGING WORLD

TRAINING & BUSINESS SERVICES

OPEN COURSES 2021

19

THE TRAINING & M A N U FA C T U R I N G G R O U P Introducing The Training & Manufacturing Group (TMG).

The Training & Manufacturing Group (TMG) is a consortium of like-minded companies bound together by a shared vision to: “Deliver world class advanced engineering skills and business support strategies through hyper-local collaboration.”

The group is a non-profit organisation and exists to enhance the performance of our members through the sharing of best practice, access to world-class technologies at

three technical academies, tailored business support and signposting to funding opportunities.

We are committed to growing our partnerships, giving our companies access to specialist expertise, the latest information and skills support to help them develop their services, increase production efficiency and boost productivity. There is also a determination to move UK industry up the technology chain by being at the forefront of Industry 4.0.

BENEFITS FOR GROUP MEMBERS INCLUDE: n

Monthly visit from a dedicated Client Manager

n Support with Apprentice recruitment and skills matching n Discounts on more than 100 MCMT upskilling training courses n Programme of seminars tailored to member interests and requirements n

Access to grants/funding opportunities

n

Unrivalled networking

A dedicated helpline for employment issues, health and safety, networking and quality n

GIVING YOU RESOURCE TO DISCOVER THE LATEST FUNDING, RECRUITMENT & TRAINING OPPORTUNITIES

20

SHAPING FUTURES

TRAINING & BUSINESS SERVICES

TECHNICAL PA R T N E R S H I P S

We are committed to being at the forefront of technical developments and technologies and are looking to develop the most comprehensive Technical Partnership in the UK. Our current technical partners are:

OPEN COURSES 2021

21

In-Comm Training and Business Services Ltd. Vigo Place, Aldridge, Walsall West Midlands WS9 8UG T: 01922 457686 E: sales@in-comm.co.uk W: www.in-comm.co.uk

MCMT Bridgnorth Building 10 Stanmore Industrial Estate Bridgnorth WV15 5HR T: 01746 802 079

MCMT Shrewsbury Brixton Way, Shrewsbury, Shropshire SY1 3LB T: 01743 462217

E: sales@mcmt.co.uk W: www.mcmt.co.uk