PCB AND SMD STORAGE
SMD reel storage is a production decision For PCB and SMD storage Manufactures, show why reel organization affects search time, ESD exposure, changeovers and procurement risk.
02 01 / 06
PRODUCTION FLOW
The reel you need should not be buried THE PROBLEM
Manual searching delays feeder readiness and line changes.
SO WHAT
Control static
Separate reels
A trolley should control static.
A trolley should separate reels.
Move safely
Identify faster
A trolley should move safely.
A trolley should make material identification faster.
Storage has to make the right reel visible, protected and ready to move.
03 02 / 06
EVIDENCE
“ESD-safe” needs evidence ASK FOR
IEC 61340-5-1:2024
Coating or material Test basis Fit with the plant’s ESD programme
100 V HBM
SO WHAT
200 V
<35 V
CDM
isolated conductors
“ESD-safe” is a claim to verify, not a feature to assume.
04 03 / 06
SPECIFICATION
Specification starts with the frame and the floor Mild steel or stainless steel construction with ESD coating. Multi-level rods or slots, locked heavy-duty casters and a published load rating. Clear divider spacing and stable access matter as much as shelf count. FRAME · FLOOR · ACCESS
SO WHAT
A shelf count is not a specification until the frame, floor and access are clear.
05 04 / 06
COMPATIBILITY
Mixed reel sizes expose weak designs
7-inch
13-inch
15-inch
common reel
common reel
common reel
CHECK THE DESIGN
“All standard reels” is not a usable compatibility statement.
SO WHAT
Compatibility belongs in dimensions and access checks, not broad wording.
Usable spacing Vertical efficiency Rear-reel access
06 05 / 06
CONTACT
Thank You
IMTronics Technology
www.imtronics.in
Sales@imtronics.in
PCB and SMD storage
CONTACT
IMTronics Technology · www.imtronics.in · Sales@imtronics.in