High integrity hydraulics for Oil & Gas

Energy

Incorporating

Reliable Solutions

For High Integrity Hydraulics

02 High Integrity Hydraulics

CONTENTS

Introduction

02

Setting the standard for safety, reliability and performance

03

ICO3S – Direct Acting Hydraulic Solenoid

04

ICO3S – High Flow Solenoid Valve

06

ICO4S – Direct Acting Hydraulic Solenoid Valve

08

Redundant valve manifold (RVM) systems

10

Introducing ICO4-PST – The first smart solenoid valve with fully integrated partial stroke testing

12

ICO4-PST – The flexible solution

13

Pressure Regulators

14

Interface Valves

14

Breakthrough Engineering for a Better World Norgren is part of global engineering organisation IMI plc. IMI is at the forefront of delivering the solutions we need in a changing world and is focused on creating tremendous value by solving key industry problems in attractive markets and employing the best.

Norgren has a proud history of creating innovative engineering solutions in precise motion control and fluid technology, and we collaborate with our customers across more than 50 countries in critical areas such as Factory Automation, Material Handling, Rail, Energy, Process Control, Life Science and Commercial Vehicles.

From improving speed, productivity, reliability and efficiency of equipment, to generating significant energy and cost savings, or lowering total cost of ownership across many industries, Norgren’s high-quality solutions are designed to help customers pursue progress, achieve new goals and overcome problems.

With market-leading industry expertise, we offer the capability, resources, engineering intelligence and global support infrastructure to tackle the largest project demands.

Breakthrough engineering you can count on.

Our world-class portfolio of fluid and motion control products include Norgren, Buschjost, FAS, Herion, Kloehn, Maxseal and Thompson Valves. Supplied either individually or combined into powerful customised solutions to meet customer needs.

High Integrity Hydraulics 03

Breakthrough Engineering for a Better World

04 High Integrity Hydraulics

Setting the standard for safety, reliability and performance Production

Norgren has over 80 years experience in providing oil, gas and chemical solutions that are proven in safety, reliability and durability, often in the most extreme environmental and operating conditions around the globe.

Transportation

With world-class product ranges including Norgren, Buschjost, Herion and Maxseal, our products are designed to work effectively in aggressive environments and extreme temperatures and meet international standards such as: »» ATEX

»» TR-CU

»» KOSHA

»» UL

»» IECEx

»» INMETRO

»» DVGW

»» NEMA

»» TÜV

»» CSA

»» FM

»» ITRI

At the heart of our offering to the Energy market are solenoid valves and pressure regulators, pressure switches, I/P and E/P convertors, 2/2 way and 3/2 way process valves, Redundant Valve Manifold (RVM) systems and partial stroke testing for both pneumatic and hydraulic applications.

Refining

Our work with leading national and international oil and gas companies and global suppliers means that we talk our customers’ language, and can bring specialised experience about legislation, standards and specifications.

Petrochemical

Approved

Find out more norgren.com Chemical

Power Generation

High Integrity Hydraulics 05

Solenoid Valve Technology Norgren offers a number of safe, reliable and costeffective integrated solenoid valve solutions specifically designed for upstream, downstream & chemical applications. From the control of safety critical pneumatic and hydraulic actuators to the the direct handling of aggressive gases and liquids.

Low power ICO3

Our valves are manufactured with hazardous area certified coils and a broad range of materials to suit the environmental and application specifications.

High Integrity Hydraulics The requirements for hydraulically actuated well heads, ESD valves or HIPPS systems are such that valves can remain in a fixed position for months or even years at a time. This introduces particular demands on the hydraulic system; requirements for solenoid valves with virtually zero leakage, coils that can remain 100% energised without failing and in particular, solutions that can be relied upon to operate on demand, even after extended periods of time.

For over 80 years, Norgren has been producing solenoid valves designed for just this situation. With over 3 billion hours of proven service in some of the world’s most arduous environments they can be trusted for the most critical of applications.

Our high integrity valves have »» A field proven track record

»» SIL approved

»» A wide range of flow and function options

»» Dry Armature enables the use of optimum magnetic materials

»» Stainless Steel and exotic material options »» Industry leading Force Friction Ratio (FFR) »» Cable terminations inside coil – No additional Ex terminations required »» Rated for 100% duty

»» Uniform coil housing reduces magnetic flux leakage »» Thermally efficient design prevents coil burn-out

»» Wide temperature range (-60°C to +120°C)

»» High magnetic force with low power consumption

»» International approvals

»» 100% end-of-line testing »» Industry leading reliability

ICO4-PST

ICO4 solenoid

06 High Integrity Hydraulics

ICO3S – Direct Acting Hydraulic Solenoid Valve Direct acting solenoid valve »» Stainless Steel 1.4404 (316L)

»» 1/2” NPT & M20 Conduit

»» Pressure up to 700 Bar (10,000 psi)

»» 100% duty cycle, 25 year life

»» Flow rate: 6.0 l/min (typical)

»» Integral filter

»» 3/2 normally closed

»» IP66

»» 12V, 24V, 48/50V, 110V & 125V DC

»» SIL 3 Capable (λs = 196, λd = 84 FITS)

»» 1/4” NPT, 1/4” BSP & Manifold Mount

»» Globally certified for use in hazardous areas

Market Leading Flow Rate Cv of 0.028 with an inbuilt last chance filter (6LPM Typical) Options up to a Cv of 0.08 (14LPM Typical)*

Temperature Range -30ºC…90ºC (-22ºF …. 194ºF)

SIL2 @ HFT=0 SIL3 @ HFT=1

Leakage Less than 2ml/hr

Multiple Pressure Variants Variants from 250 bar up to 850 bar*

Medium Water Glycol and hydraulic mineral oil.

Low Power Consumption 3W (standard) and 1W (Low Power)

(For other media please contact Norgren)

Highest Safety SIL3 Capable (λs = 196, λd = 84 FITS) Each valve is individually tested Globally certified for Hazardous areas and is IP66

Valve type

Reliable and long life, ideal for a one time installation

Substitute

Cycle 100% Duty cycle, 25yr life up to 1 million cycles.

Operation 3/2 NC (10 bar tank line restriction)

˙˙˙4˙˙˙˙˙˙S*

Voltage / Signal

Substitute

ICO3S Ex d

YO

12 V d.c.

L

ICO3S Ex mbe

YZ

24 V d.c.

B

YX

110 V d.c.

D

Substitute

125 V d.c.

E

ICO3S Ex. ia Operation Pressure 50-250 Bar @0.05 Cv and 5W

C

* Other Variants available

50-350 Bar @0.028 Cv

X

Conduit connection

50-414 Bar @0.028 Cv

Z

M20 x 1,5 mm

1

200-570 Bar @0.028 Cv

A

1/2 NPT

2

50-570 Bar @0.02 Cv

D

Seat / seal material

350-700 Bar @0.02 Cv

B

NBR

Operation

Substitute

FPM

Automatic

A

Other Options

L

Cv of 0.08 only at 250 Bar (6W)

Lever Manual Reset (Limit to 350 bar & A1/E1) Lever Manual Override (Limit to 350 bar & A1/E1) Nominal media connection 1/4” NPT Manifold Mount

M Substitute X1 NH

1/4” NPT Porting Block

A1

1/4" BSP Porting block

E1

* Contact Norgren for bespoke requirements.

Substitute

Substitute H V Add Suffix -HF

1 Watt *

-LP

1.9 W only at 0.02 Cv and below 570 Bar

-RP

90/180/270 anti clockwise turn InMetro

90/180/270 -IMN

High Integrity Hydraulics 07

Manifold Mount

50

50

28

28

1/4” NPT porting Bloc

24

23

22

21

19

20

18

16

17

15

14

13

12

10

11

9

7

8

AUTOMATIC VALVE - MANIFOLD MOU (Y***A0

153

160

P

22

Ø59

124 O

4

M

14

25

38

N

COMMON TERMINAL ASSEMBLY VIEW IN DIRECTION 51 OF ARROW 'A' LID REMOVED ø 59 SCALE ( 3 : 2 )

124

10

Ø 59

6 5

22

3

1/4” NPT

10

1 AUTOMATIC VALVE - 1/4" (NPT) VALVE BODY(Y***AX1****)

L

A

79

50

80

28

K

PORT / MOUNTING DETAILS AS SHOWN IN B

124

J

EXTERNAL EARTH

153

I

LEVER MANUAL RESET / OVERRID VALVE BODY (Y***L01*** Ø59

126 ALLOW ADDITOIONAL 5MM FOR LEVER MOV

22

PORT ‚T‘ EXHAUST

12

G

21

23

H

2x M6x1 - 6H x 8MM DEEP MOUNTING HOLES

20

PORT ‚P‘ INLET

PORT ‚A‘ OUTLET

ø 60 F

PORT CONFIGURATION 0 X Z A B C D

3/2 NC 3/2 NO 2/2 NC 2/2 NO

OPERATION 0 AUTO MANUAL RESET MANUAL OVERRIDE

4 6 1 2

PORT A L M

0

CONDUIT ENTRY 0 M20x1.5mm 1/2" NPT

VOLTAGE 1 2

0 12 VDC 24 VDC 48/50 VDC 110 VDC 125 VDC 50 VAC 110 VAC

BODY / TRIM L B C D E H J

ADDITIONAL OPTIONS -

0 SS 316L

S

0 90 DEGREE ANTI CLOCKWISE 180 DEGREE ANTI CLOCKWISE 270 DEGREE ANTI CLOCKWISE HIGH FLOW VALVE 1 WATT VALVE 1.9W VALVE IN-METRO NEPSI

90 180 270 HF 1W 1.9W INM 72

PORT 'P' INLET

19,5 MAX MOUNTING HOLES THREAD DEPTH

22

0.020 Cv C

0.028 Cv

PART NUMBER

'P'

'A'

VALVE SYMBOL

B

3/2 NC AUTO VALVES

300

100

N V

2 x M6x1 - 6H MOUNTING HOLES

'T'

200

0 NITRILE VITON

D

500 400

A1 X1 E1 NH

Flow Performance (Water Glycol)

700 600

SEAL MATERIAL

0 MANIFOLD MOUNT + 1/4" NPT BODY 1/4" NPT 1/4" BSP MANIFOLD MOUNT

24

PRESSURE (BAR) 0 50-350 PILOT 50-414 PILOT 200-570 PILOT 350-700 PILOT 0-250 PILOT 50-570 PILOT

'A'

'A'

'B'

'C' VALVE SYMBOL 2/2 NC AUTO VALVES

'B'

VALVE SYMBOL

3/2 NC MR/MO VALVES

'A'

VALVE OPTIONS WORKING PRESSURE (BAR)

Y0X00000000 Y0X00000000-1.9W Y0Z00000000 Y0Z00000000-1.9W Y0A00000000 Y0A00000000-1.9W Y0B00000000 Y0C00000000 Y0C00000000-HF Y0D00000000

'B'

VALVE SYMBOL 2/2 NC MR / MO VALVES

50 - 350 50 - 350 50 - 414 50 - 414 200 - 570* 200 - 570* 350 - 700* 50 - 250* 50 - 250* 50 - 570*

CV 0.028 0.020 0.028 0.020 0.028 0.020 0.020 0.050 0.080 0.020

1,5

Differential Pressure (Bar)

Ex d Ex ia Ex mbe

14

0 Y0 YX YZ

PORT 'T' EXHAUST (USED AS OUTLET FOR 2/2 VALVES)

25

ICO3S

E

800

22

ICO3S HYDRAULIC - VALVE CODING

PORT 'A' OUTLET 10

* MANUAL RESET AND OVERRIDE OPTIONS NOT AVAILABLE FOR THESE PRODUCT OPTIONS

ALL DIMENSIONS IN mm

CERTIFIED PRODUCT NO MODIFICATIONS PERMITTED WITHOUT THE APPROVAL OF THE "AUTHORISED PERSON"

A 24

23

WORKING PRESSURE = SEE TABLE

FOR VALVE PEFORMANCE AND LIMITATIONS DETAILS SEE INSTALLATION, OPERATION AND MAINTENANCE (IOM) MANUAL MI0600.

VALVE IS NOT UNIVERSAL

ANY VALVE DISSASSEMBLY OUTSIDE GUIDELINES SET WITHIN IOM MANUAL WILL VOID VALVE WARRANTY.

22

21

REMOVE ALL BURRS, SHARP EDGES & SWARF UNSPECIFIED TOLERANCES DRAWN TO: BS8888 Precis 0 - 100 ± 1 101 - 500 ± 2

0.080 Cv

0.050 Cv

VALVE WEIGHT = 2.5 - 3.0 Kg

20

19

18

17

>500 ± 5

ANGLES ± 1°

TRACEABILITY REFER TO & PACKING TRAVELLER/ REQUIREMENTS: INSPECTION PLAN

16

15

14

13

12

11

10

9

0 2 4 6 8 10 12 14 16 18 20 Volumetric Flow (l/min)

8

CRITICAL CHARACTE

# ##.## (A)

(B)

(A) - REFERENCE NUMBER (B) - REFERENCE DIMENSIO

7

08 High Integrity Hydraulics

ICO3S – High Flow Hydraulic Solenoid Valve »» High flow solenoid operated valve

»» 1/4” NPT & 3/8” BSP & Manifold Mount

»» Stainless Steel 1.4404 (316L)

»» 1/2” NPT & M20 Conduit

»» Pressure up to 350 Bar (5,100 psi)

»» 100% duty cycle, 25 year life

»» Flow rate: 90 l/min (Typical)

»» Integral solenoid filter

»» 2/2 & 3/2 normally closed

»» IP66

»» Closed centre operation (block-before-bleed)

»» SIL 3 Capable (λs = 226, λd = 107 FITS)

»» 12V, 24V, 48/50V, 110V & 125V DC

»» Globally certified for use in hazardous areas

Market Leading Flow Rate Cv – 0.325 (1/4” ports) – 18 LPM @ 15 bar ΔP Cv = 0.450 (Manifold mount and 3/8” Port) – 25 LPM @ 15 bar ΔP Operating Pressure 50 - 350 Bar Low Power Consumption 3W (standard) and 1W (Low Power) Highest Safety SIL3 Capable (λs = 222, λd = 107 FITS) Each valve is individually tested Globally certified for Hazardous areas and is IP66 Temperature Range -30ºC…90ºC (-22ºF …. 194ºF) Leakage Less than 2ml/hr Medium Water Glycol and hydraulic mineral oil.

(For other media please contact Norgren)

Cycle 100% Duty cycle, 25yr life up to 1 million cycles.

Operation 2/2 and 3/2 NC (10 bar tank line restriction)

Reliable and long life, ideal for a one time installation

SIL2 @ HFT=0 SIL3 @ HFT=1

High Integrity Hydraulics 09

Valve type

Substitute

˙˙Y˙˙˙˙˙˙˙S*

Voltage / Signal

Substitute

ICO3S Ex d

YO

12 V d.c.

L

ICO3S Ex mbe

YZ

24 V d.c.

B

Conduit Connections

Substitute

110 V d.c.

D

Automatic

A

125 V d.c.

E

Lever Manual Reset

L

* Other Variants available

Lever Manual Override Options

M

Conduit connection

Substitute

1 2

3/2 NC

4

1/2 NPT

3/2 NO

6

Seat / seal material

2/2 NC

1

NBR

2/2 NO

2

FPM

Connection Type

Substitute

Other options

NPT

A

1 Watt*

BSP

E

90/180/270 anti clockwise turn

Manifold

N

In Metro

Bore Size

Substitute

1/4” All Ports 0.325 Cv

1

1/4” with 3/8” Exhaust 0.45 Cv

X

3/8” All ports 0.45 Cv

2

Manifold Mount 1/4” Flow 0.325 Cv

L

Manifold Mount 3/8” Flow 0.45 Cv

H

* Contact Norgren for bespoke requirements.

Flow Performance (Water Glycol)

Differential Pressure (Bar)

400 350

1/4” Ports

300

3/8” Ports

250 200 150 100 50 0

0 20 40 60 80 100 120 140 Volumetric Flow (l/min)

Substitute

M20 x 1,5 mm

Substitute H V Add Suffix -LP 90/180/270 -IMN

10 High Integrity Hydraulics

ICO4S – Direct Acting Hydraulic Solenoid Valve »» Direct acting solenoid valve »» Stainless Steel (316 & 316L) »» Pressure up to 414 Bar (6,000 psi) »» Flow rate: 60 l/min (typical) »» 2/2 & 3/2 Universal »» 18/33V, 24V, 50V, 110V & 125V DC »» 25V, 110V & 240V AC »» ¼” & ½” NPT, BSP & Manifold Mount »» ½” NPT & M20 Conduit »» 100% duty cycle

High Flow Rates 0.28 Cv at ¼” Port size 3.5 Cv at ½” Port size *

Temperature Range -20ºC…90ºC (-22ºF …. 194ºF) Lower temperatures on request *

Operating Pressure 0 - 414 Bar

Leakage Bubble Tight

Low Power Consumption 9.6W (207 Bar) and 15.1W (414 Bar) Lower Power consumptions available *

Medium Water Glycol and hydraulic mineral oil.

Highest Safety SIL3 Capable (λs = 76, λd = 5 FITS) Each valve is individually tested Globally certified for Hazardous areas and is IP66

Cycle 100% Duty cycle, 25yr life up to 10 million cycles.

Operation 2/2 and 3/2 Universal

»» SIL 3 Capable (λs = 79, λd = 5 FITS) »» Globally certified for use in hazardous areas

Reliable and long life, ideal for a one time installation

SIL2 @ HFT=0 SIL3 @ HFT=1

High Integrity Hydraulics 11

Model

Substitute

ICO4S

Y1

Operating Pressure

Y1˙˙˙˙˙˙˙˙S

Substitute

Body / trim materials 316L Voltage / Signal

Substitute S Substitute A

0-207 Bar (3,000 psi)

6

18/33 V d.c.

0-414 Bar

9

24 V d.c.

B

Substitute

50 V d.c.

C

2/2 Normally closed

1

110 V d.c.

D

2/2 Normally open

2

125 V d.c.

E

3/2 Universal

3

25 V a.c.

G

Port config.

Operation

Substitute

110 V a.c.

J

Automatic

A

240 V a.c.

M

Jack Screw Manual Override

S

Conduit connection

Lever Manual Override

M

M20 x 1,5 mm

1

1/2 NPT

2

Lever Manual Reset Process conn.

L Substitute A1

1/4” NPT 1/4” BSP

E1

1/2” NPT

A3

1/2” BSP

E3

Manifold mount

KF

Seat / seal material

Substitute

Nylon / high nitrile

J

Nylon/FPM

K

Please contact us before use with fluids other than those specified or for requirements outside of the published specifications.

Flow Performance (Water Glycol) Differential Pressure (Bar)

450 400 350 300 250 200 150 100 50 0

0 10 20 30 40 50 60 70 80 90

Volumetric Flow (l/min)

Substitute

12 High Integrity Hydraulics

Hydraulic Manifold Systems Manifold systems can be designed as a system manifold or additionally as a redundant manifold system (RVM).

RVM's are designed; to increase safety (1oo2) by ensuring that a process can be shut down even if a solenoid valve were to fail open, to increase uptime (2oo2), by ensuring that a process can continue to run if a solenoid valve failed closed, or to satisfy both requirements with a single integrated design (2oo3). Manifolds can be designed to include condition monitoring, to allow for online maintenance/servicing and to incorporate additional system elements such as pressure regulators or flow controllers. »» Compact system Space saving with the smallest overall footprint Reduces potential leak paths and installation time »» Fully configurable modular design Can incorporate bypass functions, check valves flow control valves, regulators etc.

Visual indicators can be added showing valve status »» SIL Certified components enabling complete SIL certified RVM systems Ensuring a safe operation »» Partial Stroke Testing Option to incorporate Maxseal ICO4-PST within the RVM for highest possible SIL performance. »» High flow and pressure options using Maxseal ICO3 hydraulic systems Pressures up to 690 bar and 0.45 CV if required. »» Stainless Steel SS316L and exotic materials available on request »» Low Power consumption 3W to 1W power per valve Find out more norgren.com

High Integrity Hydraulics 13

V83 Modular RVM with By-Pass

Hydraulic 2oo3 fail safe trip system for gas and steam turbines The Herion Hydraulic 2oo3 system provides safety and availability for main shut off emergency process valves with hydraulic actuators.

»» Available for low and high operational pressure 5 – 320 bar

Using three identical solenoid valves to create a flexible 2oo3 voting logic for unequalled failure tolerance, the system uses redundant cartridges which allow high flow rate and a quick response time.

»» Cartridges sizes DN 16; 25; 32; 40; 50 AND 63

»» Different sizes provide high flow availability 200 – 4000 l/min »» Fast reaction time »» Safety Control – direct monitoring of solenoid valves position (proximity switches)

Hydraulic 2oo3 system

»» IP 65 »» Certification to ATEX, GOST »» Redundant cartridges »» Partial Stroke Testing Option »» Maintaining Safety during operation (redundant 2oo3 system) »» Prepared outlets for pressure transducers

14 High Integrity Hydraulics

Introducing ICO4-PST The first smart solenoid valve with fully integrated partial stroke testing The ICO4-PST is the first fully integrated partial stroke testing solution with the control system built into the market leading Maxseal ICO4 high integrity solenoid valve. With the lowest safe and dangerous failure rates of any intelligent PST system on the market and always providing the highest possible Diagnostic Coverage, the best possible SIL performance is guaranteed. »» No dedicated PST device required therefore significantly reduces engineering requirements »» High level diagnostics with position, pressure and time monitoring

»» Simple Pass/Fail reporting

»» -40°C … +60°C

»» Dual override mechanism eliminates possibility of over-stroke

»» Local testing using HART 475 communicator, remote testing via HART

»» Compatible with valve speeds from 1.5 to 120 seconds

High Integrity Hydraulics 15

The only solenoid valve with integrated PST control electronics

Compatible with hydraulic actuators

Compatible with Redundant Valve Manifold Ideal for retrofit

Simplifies engineering process

16 High Integrity Hydraulics

Fully flexible manifold options available

ICO4-PST 1oo2 Manifold

ICO4-PST The flexible solution Another product of our innovation and technical excellence, the ICO4-PST is reliable and flexible, and can be designed to your specification. Manifold options are available depending specific environmental and application requirements. »» Solenoid configurations •• 1oo1, 1oo2, 2oo2, 2oo3 »» High flow rate Cv up to 5.0 •• Reduces requirements for QEVs, pilot valves & boosters

»» Actuator Types •• Pneumatic, hydraulic •• Spring return •• Quarter turn, linear »» Valves •• Ball, butterfly, gate, globe, HIPPS

»» Valve Speeds •• 1.5 to 120 Seconds »» Operating temperature range •• -40°C … +60°C

High Integrity Hydraulics 17

18 High Integrity Hydraulics

Pressure Regulators

65

ø56

»» J50 Spring loaded pressure regulators »» Suitable for clean media »» Balanced ¼” valve provides stable outlet pressure »» Stainless Steel 1.4401 (316)

G 3/8

»» Inlet pressures up to 750 Bar (10,900 psi)

65

»» Outlet pressure range: 15 … 550 Bar (200 … 8,000 psi)

76,5 199

»» Port size: 3/8” ISO G/NPT

28,5

»» Temperature rating down to -50°C

11

»» Seats & Seals: PCTFE, NBR, FPM, EPDM

J50˙˙˙˙˙˙˙˙˙˙˙˙˙ Valve seat size

2nd options

Substitute

Substitute None

1/4”

C

Not required

1/16” Unbalanced (for gases inc. filter)

Y

Locking version

005

Travel Stop

006

Material

Substitute

Aluminium

T0

Stainless steel

B9

Port size

Substitute E2

G 3/8

Option

A2

3/8” NPT Outlet Pressure

3/8” NPT process ports with 1/4” NPT gauge ports, 1/8” NPT spill ports NACE Not required

Substitute

0,1 ... 5 bar (1,4 ... 73 psig)

M

0,1 ...10 bar (1,4 ... 145 psig)

P

2 ... 20 bar (29 ... 290 psig)

R

5,2 ... 52 bar (75 ... 754 psig)

W

10,3 ... 103 bar (149 ... 1494 psig)

Y

15 ... 150 bar (218 ... 2176 psig)

Z

25 ... 275 bar (363 ... 3989 psig)

4

55 ... 550 bar (798 ... 7977 psig)

8

»» Pilot Operated hydraulic valves (Water glycol & Hydraulic mineral oil) »» Stainless Steel 316L construction »» 2/2 Normally Open & Normally Closed »» 3/2 Normally Closed & Universal »» Operating Pressure up to 414 Bar (6,000 psi)

F P

»» ¼” & ½” NPT, BSP & Manifold Mount »» Temperature Range: -10°C … 80°C (15°F … 175°F) »» Seats & Seal: NBR & Nylon 66

FP Substitute

NBR

N

FKM

V

EDPM

E

Nitrile (special grade)

Q

Relieving

»» Flow rate: 60 l/min (typical). Cv 0.28

None

Panel mount Elastomer

»» Pilot Pressure 3 … 12 Bar (45 … 175 psi)

015 Substitute

Filter (25 µm) - gases only Filter & panel mount

Interface Valves

013

Substitute

With

R

Without

N

High Integrity Hydraulics 19

Norgren operates four global centres of technical excellence and a sales and service network in 50 countries, as well as manufacturing capability in Brazil, China, Czech Republic, Germany, India, Mexico UK and the USA.

For further information, scan this QR code or visit www.norgren.com

For information on all Norgren companies visit www.norgren.com Supported by distributors worldwide.

Norgren, Buschjost, FAS, Herion, Kloehn, Maxseal and Thompson Valves are registered trademarks of Norgren companies.

Due to our policy of continuous development, Norgren reserve the right to change specifications without prior notice. z9576BR en/07/20 Selected Images used under license from Shutterstock.com

Incorporating