Ilhan Gokay Ozdemir // Architecture + Design Portfolio 2016

0.1

promera / bonsai garden rhino + vray

ilhan_ozdemir

portfolio/2016

ABOUT

Born in 1994, ankara, turkey, Ilhan graduated from high school with an international baccalaureate degree in 2012. his first introduction to professional design was at pratt institute, new york, in 2010 . he has been involved in different levels and aspects of design since then. he started at the university of waterloo school of architecture in 2012 to pursue his passion for design in architectural form.

Alongside his academic education, ilhan has 1,5 years of full time work experience in architectural design, 3d modeling & rendering and graphic design. he is currently studying 4th year of university and will be graduating in 2017.

contact Name: ILHAN GOKAY OZDEMIR email: ilhangokay@hotmail.com phone: +1 (519) 242 5794

2

ilhan_ozdemir

portfolio/2016

resume EXPERIENCE - quadrangle architects / Senior Level Architectural Assistant / toronto , january - august 2016

Construction documents, feasibility studies, physical modeling, material studies, digital modeling, rendering.

- Designstor / 3D Modeling associate / Toronto, September - december 2014

Mass modeling, Detailed modeling, furniture modeling, view selection, rendering, Lighting & Other photoshop tasks.

- Stantec Architecture / ARCHITECTURAL ASSISTANT / Edmonton, January - May 2014

project proposals, document packages, Revisions, rendering and technical drawings.

- AOzsut Engineering and Architecture / Architecture Intern / Ankara, May - July 2013

design & construction documents, Design Modeling.

- Turkish Education Foundation English Department / Graphic Designer / Ankara, May - August 2012

cover page and graphics for journal. 10.000 copies printed.

EDUCATION - University of Waterloo School of architecture

/ Candidate for Honours Bachelor of Architectural Studies

skills Co -op

/ 2012 - Present

- TED Ankara College Foundation High School

/ International baccalaureate

/ 2008 - 2012 / Ankara, Turkey.

- Pratt Institute

/ Art & Design

/ drafting - Autocad - revit

/ rendering - vray - lumion

/ modeling

/ post

-

-

3Ds Max rhino grasshopper sketchup

Discovery Summer Program / July - August 2010 / New York, USA.

photoshop illustrator indesign after effects audition

- Bilge Adam

/ Technical

Drawing and 3D Course (AutoCAD, 3DsMax, Photoshop) / March - October 2011

AWARDS & DISTINCTIONS - Founding member + coordinator of uwsa makerlab / 2015 - Stantec Corporate Challenge T-Shirt Design / 1st place / 2014 - University of Waterloo Presidents Scholarship / 2012 - Honorable Mention in photo contest “Human and Interior Space� / 2012 - TED Ankara Foundation High School Academic Excellence Scholarship /2008 - 2012

3

ilhan_ozdemir

portfolio/2016

index 01 / urbs vita

s u s t a i n a b l e _ p r e f a b

02 / asimov chair

c h a n g i n g _ p e r s p e c t i v e s

03 / liberty u

r

b

a

n

_

C

o

m

p

l

e

x

04 / promera

b o t a n i c s & r e s e a r c h

05 / galleon

h i s t o r y , c u l t u r e & h u m a n

06 / coop

p r o f e s s i o n a l _ w o r k

07 / appx o

4

t

h

e

r

_

w

o

r

k

s

ilhan_ozdemir

portfolio/2016

0.2 Venus de milo rhino + vray

5

ilhan_ozdemir

portfolio/2016

01

urbs vita

In collaboration with / Kevin park & yuchen zhang / FOR 3B STUDIO AT UWSA Design completion / 2015 / cambridge / CANADA

Prefabricated modules are attached to existing truck bays to create a dynamic street condition. these modules could be support areas for food production or provide retail space.

6

ilhan_ozdemir

portfolio/2016

Located to the east of junction in toronto, this project aims to use modular & prefabricated design principles to create a diverse and sustainable living environment. the building can be perceived in 3 parts: 1) light industrial type, food growing/preparation areas, 2) community programs that include a market, bike workshops and cafes 3) residential units & amenity spaces.

1.01

street view rhino + vray & PS

7

ilhan_ozdemir

portfolio/2016

/ l a t i t u d e _ 4 3 ° 4 0 ’ 2 . 6 9 ” N /toronto /longitude_t79°27’28.35”W / c a n a d a

1.02 site plan

- THE GIVEN SITE IS in AN EXISTING LIGHT INDUSTRIAL ZONE, SURROUNDED BY RAIL CORRIDORS, COMMERCIAL TRAFFIC ROUTES AND BIKE TRAILS. THE PROJECT TAKES THESE ENVIROMENTAL CONDITIONS INTO CONSIDERATION, ORIENTING ITSELF ACCORDINGLY WHILE IMPLEMENTING COMPLIMENTARY PROGRAMS TO THE EXISTING URBAN TEXTURE. - THE ADJACENT INDUSTRIAL BUILDING IS INTEGRATED AND USED FOR INDOOR, HYDROPONIC FARMING, SUPPORTED WITH A ROOFTOP GREENHOUSE. THE PRODUCE IS SOLD AND CONSUMED IN THE COMMUNITY MARKET ON SITE. THE RESIDENTS OF THE BUILDING ARE PROVIDED THEIR PERSONAL GROWING SPACES AS WELL. PREFABRICATED MODULES CAN ALSO BE ATTACHED TEMPORARILY TO THE BUILDING FRONT TO MODIFY AND SUPPORT THE GROUND LEVEL PROGRAMS AS NEEDED.

BUILDING PULLS BACK FROM THE RAIL CORRIDOR, massing and landscaping between the trains and units mitigate noise levels.

8

1.03 site section

ilhan_ozdemir

RESIDENTIAL SPACES & ATRIUM

portfolio/2016

1.04 concept & program model rhino

ROOFTOP GREENHOUSES

COMMUNITY SPACES

(MARKET + BIKE WS + CAFE)

PUBLIC GALLERY

(CONNECTING STREET & PARK)

LIGHT INDUSTRIAL STRUCTURE (HYDROPONIC GROWING AREAS)

1.05 MORPHOLOGY

1. Steel Frame & warehouse constructed

2. Residential Modules are added

2. glass atrium is completed

Prefabrication construction method provides mass manufacturing and customization capibilities while maintaining high production quality.

4. Greenhouses are built

5. COnstruction complete

1.06 CONSTRUCTION VS FINAL VIEW rhino + vray & PS

9

ilhan_ozdemir

portfolio/2016

public building atrium connects the street to the park and trail behind the building.

1.07 ground level plan

amenity and social spaces are provided for the residents in addition 1.08 residential level plan to public spaces on ground level.

10

the design integrates existing industrial framework, allowing for production areas and car parking underneath, leaving the streets for more social programs.

1.09 long section

ilhan_ozdemir

portfolio/2016

the program orientation takes into account the neighbouring rail corridor, pushing residential units away from it and mediating the noise by layering park and atrium programs between the two.

1.10

exploded axonometric drawing

11

ilhan_ozdemir

portfolio/2016

large variety of residential suite layouts provide for a diversity of user types. this leads to a more balanced community consisting families, professionals and students.

12

1.11

residential unit layouts

ilhan_ozdemir

portfolio/2016 1.12

3d printed suite models (1/100)

3d printed models used to test out suite layouts, modules are removable to try out different combinations.

private-public spaces offer social spaces for the residents, encouraging strong neighbourship culture.

1.13

atrium rendering

the design consists on site and prefab construction techniques for different elements of the building, making use of advantages of both systems.

1.14

section details

13

ilhan_ozdemir

portfolio/2016

02

14

asimov chair

In collaboration with / LARA ISAAC / FOR 3B ELECTIVE AT UWSA completion / 2015 / CAMBRIDGE / CANADA

ilhan_ozdemir

portfolio/2016

as part of 3rd year structural design/build elective, our team took on designing a chair that represents ideas of the acclaimed author isaac asimov. his humanist philosophy is emphasized through the dynamic and social aspects of the chair while the form and structure pays tribute to asimov’s work and his interest in space. The result is asimov chair; it is consisted of two independently rotating rings, the main body which supports the rings with 4 spokes each and 2 different seating elements for the separate chair and bench functions.

manifesto // There is no up or down in space, where gravity holds no domain.

There are no directions either, what is right becomes left a moment later.

Space might be, the ideal vacuum for thinking after all, granting freedom from bias or prejudice. taking away our sense of orientation. by nature it forces us to be constantly versatile. through which, we could become truly neutral, opening our minds to all points of view.

Asimov embraced this freedom and the Asimov chair is built on it.

The chair rests in motion, all positions are correct, all rotations are right, all directions lead somewhere.

It embraces the individual, to carry them through physical space; changing their perspectives constantly. as a bench, it demands 2 or more to sit. a socio-political collision is required, to balance ideas, perspective and gravity.

There is no polarization, but only ideas, vision and revolution.

2.01

close-up photo

15

ilhan_ozdemir

portfolio/2016

2.02 exploded axo

- asimov chair has 2 main modes of sitting, noted as chair and bench modes.

- the chair mode provides seating surface for a single user whereas the bench mode can accomodate between 1-6 people.

- the bench mode performs better with more than a single user since multiple users balance the rotating ring by sitting on opposite sides. This opposition brings balance to the whole surface.

- in chair mode, the structure is balanced on the larger ring and the stem which can rotate independently from each other. this means the user can pivot the chair with their feet on the ground, turning the balancing ring to rotate the whole chair. orbiting movement can be achieved by taking the feet off the ground and moving the chair by changing the center of gravity through body movements.

16

ilhan_ozdemir

portfolio/2016

2.03 Final product

2.04 plan view of chair mode

2.05 plan view of bench mode

2.06 section of chair mode

2.07 section of bench mode

17

ilhan_ozdemir

portfolio/2016

chair_mode c o n s t a n t _ m o t i o n

18

//

2.08 Axonometric of chair mode

2.09 chair in motion

2.10

2.11

chair in Motion

chair in Motion

ilhan_ozdemir

portfolio/2016

bench_mode

b a l a n c i n g _ a c t

2.12

//

axonometric of bench mode

2.14 bench in motion

2.13

bench in motion

2.15 bench in motion

19

ilhan_ozdemir

portfolio/2016

the chair was modeled in 3D, from which shop drawings were produced.

18.4mm plywood sheets were cut and laminated to produce parts.

process // the force calculations were complicated by many different types of movement that the chair offers. indeterminate forces were involved, thus simplifying assumptions were made to resolve these forces. we overstructured the chair slightly to make up for these simplifications. in addition, the stem is supported with an aluminum tube around a steel rod to accomodate the independent rotation of the upper and lower rings.

2.16

20

2.18

chair mode calculations

construction model

2.17

2.19

cnc cut pattern

bench mode calculations

ilhan_ozdemir

portfolio/2016

2.20 initial sketch model

2.22 stem lamination

2.24 stem and spokes

2.26 fit test

2.21

cnc process

2.23

ring lamination

2.25 metal core installed

2.27 final product

21

ilhan_ozdemir

portfolio/2016

03

22

liberty

PERSONAL WORK FOR 3A STUDIO AT UWSA design completion / 2015 / cambridge / CANADA

ilhan_ozdemir

portfolio/2016

Liberty complex is a high density building proposal to be located at toronto’s liberty village.

The design brings together corporate and creative office spaces alongside a farmers market, retail and recreation areas, adding new programs to the commercial core on the adjacent lot.

F.A.R. 7 is maintained while the high massing density of the context is mitigated by orientation and form of the building. northeast corner of the building terraces away from the major intersection while north elevation gently flexes back in order to relieve the alley condition created with the neighbouring building.

3.01 street view rhino + vray & PS

23

ilhan_ozdemir

portfolio/2016 3.02 ground floor plan

retail support & storage public market area Circulatory apparatus and amenity green areas

covered public market creates an ideal market space for the canadian climate. it is directly connected to the go train station, offering a convenient stop on the daily commute. it also provides a pleasant shortcut for pedestrians through the building

24

3.03 public market view rhino + vray & PS

ilhan_ozdemir

portfolio/2016 3.04 office floor plan

open office spaces private offices Meeting rooms Circulatory apparatus and amenity lightwells

Tapered lightwells are provided to provide democratic daylighting within the offices while reinforcing the connection between levels.

3.05 lightwell view rhino + vray

25

ilhan_ozdemir

portfolio/2016

the tower is located on the north-west corner to avoid the line of solid high-rise mass created along the gardiner. the podium offers a break to the vertical density of the neighbourhood.

3.06 context perspective rhino + vray & PS

A sloped plane leads from the go train station, up to pockets of landscaping, connecting to the first level of podium & recreational programs. retail and market programs are provided underneath this plane. circulation is filtered through the park.

3.07 sectional perspective rhino + vray & PS

26

ilhan_ozdemir

portfolio/2016

/ l a t i t u d e _ 4 3 ° 3 8 ’ 1 5 . 5 1 ” N /toronto /longitude_79°25’1.15”W /canada

3.08 office floor plan

height and density of the building increases gradually from south to north, creating a smooth visual transition from the park to podium and tower. additionally, the park creates a acoustic and visual buffer zone between the expressway and the public programs of the bulding, establishing an ideal proximity between vehicular traffic and pedestrians.

3.09 office floor plan

27

ilhan_ozdemir

portfolio/2016

04

promera

personal work FOR 2b studio AT UWSA completion / 2014 / CAMBRIDGE / CANADA

4.01 sectional perspective rhino + vray & PS

4.02 BUILDING CONCEPT

28

ilhan_ozdemir

portfolio/2016

project promera aims to rehabitate Milton Quarry, currently operated by Dufferin Aggregates. The design consists a research & development lab, greenhouses, tree nurseries, botanic exhibitions and processing programs to create an integrated work-flow, spanning from the study of nature to innovation and production of highly refined artifical versions ultimately.

4.03 INTERIOR CONCEPT

29

ilhan_ozdemir

portfolio/2016

05

5.01 axo & sections

30

rhino & illustrator

galleon

In collaboration with / kevin park / FOR 4a studio AT UWSA work in progress / 2016 / Rome / Italy at its current state, galleon is an urban design study for an area south-east of rome along the ancient aquaducts. It spans across 5 blocks, providing dense residential units on an elevated podium with 5 core program towers interjecting at intervals.

ilhan_ozdemir

portfolio/2016

5.02 plan & Elevation

the ground level is a free-flow plane with programs spreading out from the towers, interacting and shaping the public realm while conciliating the street condition with the parco degli acquedotti.

rhino & illustrator

in ma el le in ev ris ve tain atio de e l s n, pr sig ab whil the th m og na ov e s e an any ra tor e it to kyl pod gr d t we in iu l m. s ou th aye the of o b rs e m nd e p rs y s ec p pl ro of pin ac om an je d e e e ct the ow and to c n th ity e

31

ilhan_ozdemir

portfolio/2016

06

quadrangle co-op Senior Level Architectural Assistant / toronto / january - august 2016

During my 8 months coop term at quadrangle, I had exposure to a lot of different projects and tasks. quadrangle helped me thrive and expand my knowledge on residential typology, suite layouts and the technical framework behind it. my efforts were mostly concentrated on production of construction documents as well as marketing drawings. I was also involved in mechanical coordination, feasibility studies, record drawings, Detailed 3D modeling & rendering, physical modeling and preparation of material boards.

6.01

schedule c (LPH)

6.02 schedule c (PH)

6.03

32

Tender DWG / typical floor

ilhan_ozdemir

portfolio/2016

6.04 digital model

6.05 colored elevation dwg

6.06 retail space rendering

33

ilhan_ozdemir

portfolio/2016

06

designstor co-op 3d modeling associate / toronto / september - december 2014

for 4 months of the fall 2014 term, I worked for designstor, an architectural visualization firm in toronto. This was a great learning experience and I had an opportunity to hone my modeling and rendering skills.

I worked on a variety of tasks ranging from 3d modeling to material creation, lighting, photoshopping and entourage creation for architectural renderings.

6.07

sale center with hi-res rendering

6.08

34

lobby space rendering

ilhan_ozdemir

portfolio/2016

6.09 amenity space rendering

6.10

6.11

amenity space rendering

lobby rendering

35

ilhan_ozdemir

portfolio/2016

06

stantec co-op Architectural Assistant / edmonton / january - may 2014

during winter 2014 coop term, I had the opportunity to work for stantec architecture in edmonton. This exposed me to a rich variety of architectural projects and experience.

My tasks included design studies, production of technical drawings, 3D masses, models and renderings.

I also had the chance to contribute to multiple proposal and R&D projects.

6.12

elevation studies

6.13

concept sketch

the projects I was involved with pertained to industrial, commercial, scientific and prefab building typologies. This variety really helped get a sense of specific requirements and considerations needed for each unique typology.

6.14

36

concept rendering

ilhan_ozdemir

portfolio/2016

6.15

collage

6.16

biofuel plant sections

6.17 biofuel plant rendering

37

ilhan_ozdemir

portfolio/2016

07

new adam sculptural study for 1b studio at UWSA design & build Completion / 2013 / cambridge / canada

NewAdam represents conflict, humanity and its technology. how it builds us up and breaks us down. it is the manifestation, of a destructive harmony. ideology and reality.

7.01 model detail

7.02 podium detail

38

ilhan_ozdemir

portfolio/2016

7.03 model overall

7.04 model backlit

39

ilhan_ozdemir

portfolio/2016

07

iox lantern personal project design & build Completion / 2012 / ankara, turkey

IOX is a collage of simple materials, adorned by light. paper and wood, Illuminated from the core, with 100W worth of comfort.

7.05 side view

40

ilhan_ozdemir

portfolio/2016

7.06 Front view

41

ilhan_ozdemir

portfolio/2016

contact Name: ILHAN GOKAY OZDEMIR email: ilhangokay@hotmail.com phone: +1 (519) 242 5794

42