Fluid Power Journal July/August 2013

July/ August 2013

+

All about vacuum: Basic schematics

Innovative Designs & Publishing

EnergyEfficient Hydraulics: Variable Frequency Drives

The Great Ascent

3245 Freemansburg Avenue , Palmer , PA 18045-7118

New!

Continuous Jacking System

Nonprofit Organization US Postage Paid Bolingbrook, IL Permit #323

Circle 459

Circle 429

Fluid Power Journal

july/august | Volume 20 | Issue 6

8

12

Basic Vacuum Schematics

Offshore Technology Conference Sees Record Number of Attendees in 2013

Understand the basic schematics in vacuum material handling and how they should be used to illustrate to the installer or end user how the system works.

Trade Fairs Highlight Industrial Integration in Crucible of Fourth Industrial Revolution.

Keynote Theme “Integrated Industry” at Core of Forums, Thematic Clusters, and Competence Centers.

40

The great ascent Continuous jacking system makes installing and maintaining offshore wind farms safer, more reliable, and more efficient.

104,800 in attendance is second-highest in show history.

38

2013 Hannover Messe

30

in This

Issue How Does The Hydraulic Jacking System Work? p.31

Departments

Energy-Efficient Hydraulics: Variable Frequency Drives as Pump Prime Movers

04 Notable Words 10 Fluid Power Puzzle 13 Industry News 14 IFPS News 19 Product Review 20 People in the News 21 Economic Report

22 Literature Review 25 FPEF News 26 Professional Development 28 NFPA News 32 Product Spotlight 44 Calendar of Events 45 Classifieds

Publisher’s Note: The information provided in this publication is for informational purposes only. While all efforts have been taken to ensure the technical accuracy of the material enclosed, Fluid Power Journal is not responsible for the availability, accuracy, currency, or reliability of any information, statement, opinion, or advice contained in a third party’s material. Fluid Power Journal will not be liable for any loss or damage caused by reliance on information obtained in this publication.

Fluid Power Journal is the official publication of the International Fluid Power Society

2

www.fluidpowerjournal.com | www.ifps.com

Get Social with Us!

Where All the

SolutionS come together

And connections Are mAde

Register now to get the ultimate up-close look at the future of the fluid power, power transmission and motion control industries.

Registration is now open for IFPE 2014 – the event that features all of the newest technology, product breakthroughs and leading-edge education. From components, systems, and controls, IFPE is your destination for finding all the solutions and design expertise you need to stay competitive and make your applications cleaner, Co-Located With greener and more efficient – all in one place.

M a r c h 4 - 8 , 2 0 1 4 I L a s V e g a s , N e Va d a , U s a register now at www.ifpe.com to save over 30%!

Circle 430

Co-Owners

Notable Words Publisher Innovative Designs & Publishing, Inc. 3245 Freemansburg Avenue, Palmer, PA 18045-7118 Tel: 800-730-5904 or 610-923-0380 Fax: 610-923-0390 | Email: AskUs@ifps.org www.FluidPowerJournal.com

A Call to Action As president

of the International Fluid Power Society this year, I have had the pleasure of attending a large number of trade shows and national meetings, completed many local customer calls, and heard the same dialogue being repeated: “We need skilled people.” I don’t care if it’s at the salesman level, engineering disciplines, trades, whatever. It’s the same mantra.

Why is that? Well, I hear many reasons for this, but one does seem to be in the majority.

Colleges and universities are not producing qualified candidates with exposure to fluid power. I can attest to the fact that I have talked to many good, young engineers just leaving school and they admit there are little or no fluid power classes, much less fully focused degree programs in this area.

Wow! Nature seems to have run amuck here. We are taught early and often that nature always tries to fill a vacuum. Well, if that and the laws of supply and demand are truly correct, we should be flooded with young people running to our companies and fighting to get into our profession. Are the money and benefits not right? Is the work too hard and dirty? I think not.

Check out the May/June issue of Fluid Power Journal and read the results of our recent salary survey. We take pretty good care of our people, from what I’ve read there. (By the way, isn’t the Journal looking great these days? Super congrats to the staff at IDP!) The problem, I believe, is exposure.

These young people live in a world where fluid power is everywhere. The applications for it are growing—not shrinking—but nobody seems to be pointing that out. We don’t personally have to tell the world of this fact. All we have to do, individually, is talk it up to our own sphere of influence.

This is my call to action for us all. Make an appointment with your local high school or middle school guidance office. Volunteer to give a talk at a career day function or similar. Let them know our chosen field of work is vibrant and strong, and that we need new recruits.

The Society is well on its way of completing our Boy Scout Merit Badge project and feel this will be an awesome way to educate young folks about fluid power.

Check out the May/June issue of the Journal and read the article about Alfred State College. These students are getting certified and securing jobs. Has a nice ring to it in today’s job market, doesn’t it?

By Mark Perry, CFPHS, Again, I challenge you, get in the game. We need you!

Fitzsimmons Hydraulics, Who is a better advocate for this great career area? Those 2013 IFPS President and of us already in it! Spread the word…Fluid Power Rocks!

Chairperson

Associate Publisher: Marc Mitchell Editor: Kristine Coblitz Technical Editor: Dan Helgerson, CFPS, CFPAI/AJPP, CFPJPP, CFPMT, CFPC&C Account Executive: Bob McKinney Art Director: Quynh Vo VP Operations: Lisa Prass Accounting: Donna Bachman, Debbie Clune Publishing Assistant: Sharron Sandmaier Operations Assistant: Tammy DeLong Circulation Manager: Andrea Karges International Fluid Power Society 1930 East Marlton Pike, Suite A-2, Cherry Hill, NJ 08003-2141 Tel: 856-489-8983 | Fax: 856-424-9248 Email: AskUs@ifps.org www.ifps.org 2013 Board of Directors President & Chairperson Mark Perry, CFPHS - Fitzsimmons Hydraulics Immediate Past President Patrick J. Maluso, CFPAI/AJPP, CFPS, CFPMHM Western Hydrostatics, Inc. First Vice President Tom Blansett, CFPAI, CFPS, CFPIHT, CFPCC - Eaton Corporation Vice President Education Marti Wendel, CFPE, CFPS - Sprague Products Treasurer Dan Helgerson, CFPAI/AJPP, CFPS, CFPECS, CFPMT, CFPSD Cascade Steel Rolling Mills, Inc. Vice President Membership & Chapter Support Richard Bullers, CFPPS - SMC Corporation of America Vice President Certification Rance Herren, CFPECS, CFPSD, CFPMT - National Oilwell Varco Vice President Marketing & Public Relations Justin Sergeant, CFPS, CFPMHM - Western Integrated Technologies Vice President Educational Foundation Jimmy Simpson, CFPAI/AJPP, CFPS, CFPMM Nusim Associates Fluid Power Consultant Directors-at-Large Mike Anderson, CFPS - Motion Industries, Inc. Bill Jordan, CFPAI/AJPP, CFPMHM, CFPMHT - Altec Industries Jose Garcia, CFPHS - Purdue University Jim Lane, CFPAI, CFPS - Motion Industries, Inc. Alan Niesen, CFPS, CFPIHM, CFPMHM - HFI Fluid Power Products D. Dean Houdeshell, PE, CFPAI/AJPP, CFPE, CFPS, CFPIHT, CFPMHT, CFPMHM - Sauer Danfoss Kenneth Dulinski, CFPAI, CFPECS, CFPHS, CFPMIH, CFPMMH Eaton Corporation Timothy White, CFPAI/AJPP, CFPS, CFPECS, CFPMIH, CFPMMH, CFPMIP, CFPMT, CFPMM - The Boeing Company Jeff Kenney, CFPIHM, CFPMHM, CFPMHT - Coastal Hydraulics Scott Gower, CFPS - Gulf Controls Company, LLC Honorary Directors Robert Firth Raymond Hanley, CFPE/AI-Emeritus John Groot, CFPPS Robert Sheaf, CFPAI/AJPP, CFPE, CFPS, CFPECS, CFPMT, CFPMIP, CFPMMH, CFPMIH, CFPMM IFPS Staff Executive Director: Donna Pollander, ACA Certification Manager: Sue Tesauro Communications Manager: Adele Kayser Membership Coordinator: Sue Dyson Certification Coordinator: Connie Graham Administrative Assistant: Beth Borodziuk Bookkeeper: Diane McMahon Fluid Power Journal (ISSN# 1073-7898) is the official publication of the International Fluid Power Society published bi-monthly with four supplemental issues, including a Systems Integrator Directory, OffHighway Suppliers Directory, Tech Directory, and Manufacturers Directory,

by Innovative Designs & Publishing, Inc., 3245 Freemansburg Avenue, Palmer, PA 18045-7118. All Rights Reserved. Reproduction in whole or in part of any material in this publication is acceptable with credit. Publishers

4

assume no liability for any information published. We reserve the right to accept or reject all advertising material and will not guarantee the return or

www.fluidpowerjournal.com | www.ifps.com

safety of unsolicited art, photographs or manuscripts.

Circle 431

Circle 432

Basic Vacuum Schematics

In

By Daniel Pascoe, Vacuforce, Inc.

vacuum material handling, there usually are only a handful of separate components, such as a vacuum pump, inlet filter, control valves, and cups. This article explains the basic schematics and how they should be used to illustrate to the installer or end user how his new system works.

Schematic circuits should always be supplied with custom-made machinery, such as vacuum end-of-arm tooling, to aid the maintenance engineers in problem solving and the production engineers when they are looking for ways of improving efficiency after the installation or for adding components if the application changes years later. The body of a component should always have a schematic symbol on it, but when this is an adhesive label for instance, it could be illegible. Therefore, a master schematic will have the same schematic symbol for this component and how it is connected to associated devices.

A vacuum schematic symbol, just like in pneumatics or electrical schematics, does not indicate what the component looks like, but only how it functions. Therefore, the same schematic can be used for many different manufacturers of similar functional devices.

Fig. 1

Fig. 1 shows a very simple circuit: (1) compressed air supply, (2) single-stage vacuum venturi, and (3) vacuum cup. Compressed air is continuously supplied to the vacuum venturi, and once the cup (3) grips the part, the compressed air has to be turned off to release it. Therefore, a compressed air valve needs to be added, as shown in Fig. 2, to achieve this. Note that a two-position valve SHOWS the two positions. In this example, each position is relevant to its two actuators, one being a spring (rest position) and one being solenoid (actuated position). Fig. 3 shows the valve in each position.

Fig. 2

Fig. 3

8

www.fluidpowerjournal.com | www.ifps.com

The left side shows the pressure port (P) CLOSED, and the supply port (A) is connected to exhaust port (R). The right side shows the valve actuated by the solenoid where (P) is now connected to the supply port (A) and the exhaust is closed.

This is a normally CLOSED valve. The term “normally� means as it suggests: the valve, without any external power attached to it, has its pressure port CLOSED. The port indicators of P, A, and R are shown in both positions. This is unnecessary, of course, which is why the valve only has the ports highlighted on one side in schematic symbols. Remember, the valve schematic in Fig. 2 shows BOTH separate valve conditions.

Fig. 4 Fig. 4 shows more options that can be added to this circuit. A venturi external silencer (4) is now included, and a vacuum switch (5) indicates to the machine control that a specific vacuum level has been reached to enable the production cycle to continue. Also, between the vacuum cup (3) and venturi (2) inlet, a vacuum filter (6) has been installed to protect the venturi from dust or debris from the product being handled.

Daniel Pascoe is general manager of Vacuforce Inc., manufacturer and distributor of vacuum components and systems for industry in North America. Daniel can be reached via the Vacuforce website at www.vacuforce.com or directly at dpascoe@vacuforce.com.

Find Vacuforce on Facebook and keep updated on Twitter.

Fig. 5

Fig. 5 shows a much larger circuit, but it uses the same components as shown in Fig. 4 with dual circuits utilizing two separate pneumatic valves. An alternative to this circuit is shown in Fig. 6, but instead of using compressed air valves to turn multiple venturi on and off, it uses one large multi-stage venturi and two vacuum valves to turn the vacuum on and off. Notice the direction of the arrows on the vacuum valve compared to the compressed air valve. The arrows indicate direction of air flow. The vacuum air flow direction is, of course, opposite to a compressed air supply.

Fig. 6

Fig. 7 lists an assortment of commonly used schematic symbols in a vacuum circuit. Different manufacturers use different forms of these symbols, but they fundamentally look the same.

This article is intended as a general guide and as with any industrial application involving machinery choice, independent professional advice should be sought to ensure correct selection and installation.

Fig. 7

July/august 2013

9

fun with Words

Fluid Power Terms

ACROSS

DOWN

3 The use of gas flowing under pressure to transmit power from one location to another.

5 The use of a liquid flowing under pressure to transmit power from one location to another.

9 Pressure exerted by a confined fluid acts undiminished equally in all directions.

10 A switching device that uses the magnetic field generated by an electrical current for actuation.

12 A valve that allows flow in one direction but prevents flow in the opposite direction.

18 A device used to measure flow rate.

23 A device used to create flow in a hydraulic system.

25 The total pressure exerted on a system, including atmospheric pressure.

26 A cylinder that acts under pressure in one direction only and returns automatically when the pressure is released.

30 A sliding piece moved by or moving against fluid pressure which usually consists of a short cylindrical body fitting within a cylindrical chamber or vessel along which it moves back and forth.

31 A device that holds the compressed air in a pneumatic system.

32 The amount or quantity of something.

33 Used to control which path fluid takes in a circuit.

See answer key on page 45.

Reprinted with permission from the Center for Compact and Efficient Fluid Power (CCEFP).

10

www.fluidpowerjournal.com | www.ifps.com

1 A device used to convert fluid power into mechanical power in the form of linear motion.

2 Any device that controls, either automatically or manually, the flow of a fluid.

3 The force per unit area exerted by a fluid against a surface.

4 A measure of a fluid’s thickness or resistance to flow.

6 An air pump that compresses air into a receiver tank.

7 A part of an axle or shaft bent out at right angles, for converting reciprocal to circular motion and vice versa.

8 The volume of fluid that moves through a system in a given period of time.

11 The distance the fluid travels through a system in a given period of time.

13 A type of pressure control valve that limits the maximum pressure in a hydraulic or pneumatic circuit.

14 The absolute pressure of a confined gas is proportional to its temperature, provided its volume stays constant.

15 Used to transport fluid in a circuit.

16 A type of pneumatic pressure control valve that controls the maximum pressure in a branch of a circuit.

17 A cylinder that can act under pressure in both directions (extend and retract) to move a load.

19 The pressure exerted by the weight of the atmosphere above the point of measurement.

20 The volume of a gas at constant temperature varies inversely with the pressure exerted on it.

21 Used to start and stop flow in a circuit.

22 A device used to spray an oil mist into the stream of a pneumatic system.

24 The use of a fluid (liquid or gas) to transmit power from one location to another.

27 States that the volume of a confined gas is proportional to its temperature, provided its pressure remains constant.

28 A device used to remove contamination from a fluid.

29 The tank that holds the fluid in a hydraulic system.

2013 Fluid Power Systems Conference November 19-21, 2013 • Doubletree Hotel, Rosemont, IL Hosted by the International Fluid Power Society (IFPS), the FPDA Motion and Control Network (FPDA), and the National Fluid Power Association (NFPA)

Reliable and Efficient Hydraulics and Pneumatics for Today and Tomorrow Fluid power (hydraulics and pneumatics) is used in dozens of industries and hundreds of applications to precisely control the movement of machinery and material. Yet many engineers and technicians working in those industries do not fully understand the design concepts critical to developing efficient fluid power systems and the diagnostic and maintenance techniques essential to keeping those systems operating at peak efficiency. These concepts and techniques can result in significant energy and cost savings for companies that use hydraulics or pneumatics, as well as for the customers they serve, making fluid power a more competitive technology choice.

To help companies take advantage of these opportunities, three leading fluid power organizations— the International Fluid Power Society, the FPDA Motion and Control Network, and the National Fluid Power Association—will be hosting an educational conference at the Doubletree Hotel in Rosemont, IL on November 19-21, 2013. Professionals responsible for designing and/or maintaining hydraulic and pneumatic systems in industrial settings or mobile applications should plan to attend.

The conference will offer: ● Design workshops to communicate why energy efficiency and reliability are increasingly a concern of machine builders and the role of fluid power in meeting those needs and balancing cost issues; ●

●

●

Hands-on instruction into practical maintenance techniques from fluid power component manufacturers, distributors, and system integrators;

Facilitated roundtable discussions, where peers can share specific challenges associated with their industry and applications, learn about fluid power standards, best practices in building efficient and reliable fluid power systems, and the future of fluid power;

Networking events, including the Innovation Showcase, to help participating engineers and technicians engage with technology providers from fluid power manufacturing and distribution companies to learn the newest, cutting edge developments in energy efficient and reliable developments in hydraulics and pneumatics.

For all the details and how to register, go to www.nfpa.com/Events/FPSC.htm.

Circle 433

Offshore Technology Conference Sees Record Number of Attendees in 2013 104,800 in Attendance is SecondHighest in Show History xperts from the offshore energy industry around the world came together May 6-9, 2013 for the 2013 Offshore Technology Conference (OTC) at Reliant Park in Houston, Tex. Attendance at the conference reached a 30-year high of 104,800, the second highest in show history and up 17% from last year. Attendance surpassed the 2012 total of 89,400. The sold-out exhibition was the largest in show history at 652,185 ft2, up from 641,350ft2 in 2012. The event had 2,728 com-

E

panies representing 40 countries, including 244 new exhibitors in 2013. International companies made up 39% of exhibitors.

“We had a terrific conference with deep and broad technical coverage, supported by excellent panels and executive keynote presentations,” said Steve Balint, chairman of OTC. “Technology is at the heart of the offshore industry, and it was all here on display at OTC 2013.”

This year’s event featured nine panel sessions,

29 executive keynote presentations at luncheons and breakfasts, and 298 technical papers. Speakers from major IOCs, NOCs, and independent operators presented their views on the current challenges and future directions of the industry.

OTC’s Spotlight on New Technology recognized 15 technologies for their innovation in allowing the industry to produce offshore resources. Governors (Texas, Alabama, Alaska, Mississippi, North Carolina, and South Carolina) from the Outer Conti-

It’s about confidence

It’s about confidence

Reliable products, realistic lead times and relationships for the future from a manufacturer of hydraulic pumps and motors. That’s a relief!

1-877-SUNFAB1 • sales@sunfab.com www.sunfab.com

It’s It’s It’s about about confidence confidence It’s It’sabout about aboutconfidence confidence confidence Circle 435

12

www.fluidpowerjournal.com | www.ifps.com

nental Shelf Governors Coalition participated on a panel discussion on offshore energy development and the need for improved cooperation between the states and the Federal government.

U.S. Secretary of the Interior Sally Jewell toured the exhibition floor and held a press conference where she discussed her commitment to work with industry leaders to ensure safe and environmentally responsible offshore oil and gas operations.

Energy ministers and national oil company senior executives participated on a panel where they shared their perspectives on how the industry and its partnership models should adjust to address future supply challenges and what role companies and governments should play to shape the energy future.

Norway’s Crown Prince Haakon and his wife, the Crown Princess Mette-Marit, attended the Annual OTC Dinner on Sunday to celebrate the 40th anniversary of Norway’s participation in OTC. The royal couple toured the exhibition floor, where more than 60 Norwegian companies were part of the Norwegian Pavilion on Monday.

More than 100 Houston-area classroom teachers and 200 students attended the Energy Education Institute, where teachers learned how to teach scientific concepts of energy and its importance in a fun and exciting way. Participating students saw firsthand the exciting opportunities the oil and gas industry can offer.

The Annual OTC Dinner was attended by more than 1,000 industry leaders and conference attendees, and raised $250,000 for the Offshore Energy Center. OTC also presented its 2013 Distinguished Achievement Award to Ken Arnold; OTC Heritage Awards to James Brill and Dendy Sloan; and the Distinguished Achievement Award for Companies, Organizations, or Institutions to Total’s Pazflor deep offshore development at the sold-out event on the floor of Reliant Stadium.

OTC 2014 takes place May 5-8, 2014 at Reliant Park.

industry news Hydraulic Company Launches Product Line Hydraulic Management Group, LLC launched its own line of hydraulic products branded as “HMG-USA.” All products are manufactured under HMG’s direct technical and engineering guidance and quality control in India, Europe, and China. The line includes hydraulic piston and vane pumps/motors; all pressure, flow, unloading, check, and D03/D04/D05 directional valves; close-coupling hydraulic pump and electric motor assemblies for hydraulic power units and machine tools 5-75 hp; cartridge valves; stack valves; and hydraulic accessories (filters, strainers, heat exchangers, level and temperature gauges). In addition, the company has named David Kolodiejze to its Board of Directors. Mr. Kolodiejze was instrumental in growing the hydraulic business for Vickers with Boeing, Lockheed Martin, and McDonald Douglas during his tenure with Sperry Corp. www.hydraulicmanagement.com

‰

Serving Your Immediate Hydraulic Needs.

PRICE AND QUALITY COME TOGETHER

Introducing Our New Line of Orbital Motors Genuine Metaris Orbital Motors are your best low speed high torque motor option in an economical and compact design. The motors come equipped with a high pressure shaft seal, multiple flange options and also come in a range of displacements: 50cm³/r (3.1in³/r) to 1250cm³/r (76.3in³/r). You’ll find that our motors are a perfect fit, form and function replacement for common OEM motors in the market today. For more information, call us at 1-800-962-2703 or visit www.orbitalmotors.net.

Pumps · Motors · Valves · Servo & Proportional Valves PTOs · Orbital Motors · Cylinders · Parts The Offshore Technology Conference (OTC) is where energy professionals meet to exchange ideas and opinions to advance scientific and technical knowledge for offshore resources and environmental matters. Founded in 1969, OTC’s flagship conference is held annually in Houston. OTC has expanded technically and globally with the Arctic Technology Conference, OTC Brasil, and OTC Asia.

For more information, visit www.otcnet.org/2013.

1-800-962-2703 www.hydraulex.com Circle 436

July/august 2013

13

Visit www.ifps.org to register or call 800-308-6005.

‰ CFPAI

society News

2013 IFPS Web Seminars

ifps

Certification designations Available

Certified Fluid Power Accredited Instructor

IFPS Members: Free • non-members: $40.00

‰ CFPAJPP

July 18, 2013

‰ CFPAJPPCC

Certified Fluid Power Authorized Job Performance Proctor

Certified Fluid Power Authorized Job Performance Proctor Connector & Conductor

September 13, 2013

‰ CFPE Certified Fluid Power Engineer

‰ CFPS Certified Fluid Power Specialist (Must Obtain CFPHS, CFPPS)

October 17, 2013

‰ CFPHS Certified Fluid Power Hydraulic Specialist

‰ CFPPS Certified Fluid Power Pneumatic Specialist

‰ CFPECS Electronic Controls Specialist

‰ CFPMEC – in development Mobile Electronic Controls

November 7, 2013

‰ CFPIEC – in development Industrial Electronic Controls

‰ CFPMT

December 4, 2013

Certified Fluid Power Master Technician (Must Obtain CFPIHT, CFPMHT, & CFPPT)

‰ CFPIHT Certified Fluid Power Industrial Hydraulic Technician

‰ CFPMHT Certified Fluid Power Mobile Hydraulic Technician

‰ CFPPT Certified Fluid Power Pneumatic Technician

‰ CFPMM Certified Fluid Power Master Mechanic (Must Obtain CFPIHM, CFPMHM, & CFPPM)

‰ CFPIHM Certified Fluid Power Industrial Hydraulic Mechanic

Archived Energy-Saving Web Seminars

‰ CFPMHM Certified Fluid Power Mobile Hydraulic Mechanic

‰ CFPPM Certified Fluid Power Pneumatic Mechanic

Archived Hydraulics Web Seminars

‰ CFPMIH Certified Fluid Power Master of Industrial Hydraulics (Must Obtain CFPIHM, CFPIHT, & CFPCC)

‰ CFPMMH Certified Fluid Power Master of Mobile Hydraulics (Must Obtain CFPMHM, CFPMHT, & CFPCC)

‰ CFPMIP

Archived Pneumatics Web Seminars Archived system design Web Seminars Other

Visit www.ifps.or g to view the archive.

Certified Fluid Power Master of Industrial Pneumatics (Must Obtain CFPPM, CFPPT, & CFPCC)

‰ CFPCC Certified Fluid Power Connector & Conductor

‰ CFPSD Fluid Power System Designer

14

View Certification Testing Locations on page 42 www.fluidpowerjournal.com | www.ifps.com

NEW!

Career opportunity with the ifps A full-time Technical Editor/Certification Project Manager is needed to coordinate all technical aspects of our certification program at the Cherry Hill, N.J., headquarters office. Some travel is required for this position.

What We Are Looking For: • Experience overseeing/managing projects and project teams • Strong interpersonal communication skills (both written and verbal) • Strong problem-solving, decision-making, analytical, and organizational skills • Ability to multitask responsibilities/duties/projects/deadlines simultaneously • Advanced skills to answer technical questions related to all IFPS certifications • 5+ years working in the fluid power industry • Preferred residence within the northeast corridor of the U.S. Additional Qualifications to Help You Succeed: • IFPS certified • Curriculum development experience a plus • In lieu of a bachelor degree, extensive fluid power experience and/or a 2-year technical degree • Proficient in AutoCAD or similar schematic drawing software • Adobe InDesign helpful IFPS offers a competitive salary that will commensurate with your experience. Additional Benefits include • Medical, Dental, and Prescription Drug Program • Retirement 401(k) Program • Vacation and Holidays

Your success in certification is important. IFPS has developed a new type of Web seminar to assist you with your certification test preparation. Task and Outcome Web seminars have been added to our traditional bimonthly IFPS Web seminar schedule. Starting in July 2013, IFPS Accredited Instructors will present tasks and outcomes for the following certification tests:

July 18, 2013, 12:00 p.m. - 1:00 p.m. Eastern “Task and Outcome - Hydraulic Specialist” Presented by: Gregory George, CFPAI, Walt Disney World Co.

September 13, 2013, 12:00 p.m. - 1:00 p.m. Eastern “Task and Outcome - Industrial Hydraulic Technician” Presented by: Stephen West, CFPAI, Ivy Technical Community College “Task and Outcome - Pneumatic Specialist” Presented by: Bill Hotchiss, CFPAI, SunSource

R AT I N

EB

IFPS Members may register for free (non-members $40) by visiting www.ifps.org or by calling 800-308-6005.

TR Engineering Inc. manufactures a broad line of hydraulic hand pumps and valves, as well as custom-designed fluid power systems for the construction, manufacturing, aerospace, marine, and petrochemical industries. Our products have stood the test of time since 1982.

Proudly Made in the USA

G

CE

Certification “Task and Outcome” Web Seminars

November 7, 2013, 12:00 p.m. - 1:00 p.m.

Send resume to dpollander@ifps.org - NO PHONE CALLS PLEASE.

L

IFPS

1350 Green Hills Road #10 Scotts Valley, CA 95066 Tel:(831) 430-9920 Fax: (831) 430-9989 e-mail: info@trengineering.com

w w w . t r e n g i n e eContamination rStopS i n g . cHere! om ™ IN

YEAR

B

S

ES

S

U SI N Custom designed hydraulic hand pumps and directional control valves

Proudly made in the USA

Filters Are Our Only Business Made In The USA Since 1945 Let Us Tell You More

1350 Green Hills Road #10 • Scotts Valley, CA 95066 Tel:(831) 430-9920 • Fax: (831) 430-9989 e-mail: info@trengineering.com

www.trengineering.com Circle 437

Flow Ezy FiltErs 800-237-1165 flowezy@flowezyfilters.com flowezyfilters.com Circle 438

July/august 2013

15

IFPS

IFPS Newly Certified Professionals Chuck Adcock, MHM Entergy Corporation

David Cartwright, IHT Champion Lanes

Gary Fields, HS Donaldson Company, Inc.

Steven Hernandez, HS Bosch Rexroth

Brian Jacobs, HS Alfred State College

Kelly Amick, MHM Terex Utilities, Inc.

John Ciccone, IHT Alcoa Mill Products, Inc.

Margaruette Finney, S, PS

Randall Hesse, MHM Terex Utilities, Inc.

Benjamin Jaffe, S, HS

Cody Arliss, HS Alfred State College

Edward Cigno, HS Alfred State College

James Bailey, MHM Nelson Bailey, IHT PSM International Joseph Barron, S, HS, PS Oceaneering International SVS James Bartlett, HS Hagie Manufacturing Company Jacob Bayus, HS Alfred State College Glenn Benner, HS Donaldson Company, Inc.

David Firsdon, IHM The Boeing Company

Jose Coello, MHM Amerit Fleet Solutions Michael Covin, S, PS Gulf Controls Company, LLC Barry Crumley, HS John Henry Foster Co

James Fitzgerald, MHM Otter Tail Power Co.

Tom Engstrom, S, PS Dow Chemical James Everett, Jr., IHT Steris

James Bushong, MHT Alcoa Mill Products, Inc.

Joseph Kellen, HS

Luke Hintze, HS Tiefenbach North America, LLC

Alan Kirkpatrick, IHT G. E. Ohio Lamp

Stephen Hohman, HS

Kevin Kobold, S, HS

Mark Horvath, MHT Alcoa Mill Products, Inc.

Brent Kovash, MHM Terex Utilities, Inc.

Garrett Hamlin, IHT

Dan Hufford, S, PS Custom Mold & Design

Paul Larsen, MHM Amerit Fleet Solutions

Steve Harnish, MHT Alcoa Mill Products, Inc.

Ryan Huot, S, PS Huot MFG

Eric Lausch, IHM The Boeing Company

Eric Harvey, S, PS

Vauline Indrajaya, IHT

Jason LeRay, S, HS Oil States Industries Inc.

Corey Freeman, MHM Entergy Jeff Galguera, HS Hydraulic Supply Company

Andrew Hall, S, PS

DI R IN ECT 12 AC G T UP PM ING TO MO SOL 6 S NO EN PO BLO OID OL CK S S S

DIRECTIONAL CONTROL VALVES

Proudly Sold Through Local Distribution.

Circle 439

16

www.fluidpowerjournal.com | www.ifps.com

Jason Julius, MHM Terex Utilities, Inc.

Trent Hinrichs, S, HS Force America, Inc.

Eric Haase, HS Brandon DeCook, IHM The Boeing Company

Cole Joos, S, HS Jason Hinckley, MHM Amerit Fleet Solutions

Circle 440

IFPS Steve Lockman, PT Alcoa Mill Products, Inc.

Sergey Moskvin, S, PS St. Jude Medical

Andrew Rice, MHT Alcoa Mill Products, Inc.

Ryan Stoos, HS Hagie Manufacturing Company

Timothy Verret, Jr., S, HS Viking Drill & Tool Inc.

Robert Lundeen, IHM The Boeing Company

Daniel Murray, HS Hagie Manufacturing Company

Jim Ries, HS Kraft Fluid Systems, Inc.

Joshua Stranger, HS Alfred State College

Jeremy Weber, MHM Terex Utilities, Inc.

Matthew Lutz, S, PS Oshkosh Defense

John Nelson, HS Controlled Fluids, Inc.

Camilo Rodriguez, MHM Amerit Fleet Solutions

John Stulbarg, CC Pirtek - Monroeville

Ted Weber, HS Nott Company

Derek Majewski, S, PS Parker Hannifin

Gilbert Ngwana, S, HS, PS

Travis Schulz, MHM Terex Utilities, Inc.

Joseph Tiessen, S, PS Aggressive Hydraulics Inc.

Marcus Whalen, IHM The Boeing Company

Jeremy Palm, S, HS

Nathan Shafer, S, HS Hennepin Technical College

Alvin Toering, MHM Terex Utilities, Inc.

Kyle Wiesner, MHM Terex Utilities, Inc.

Craig Peachey, MHT Alcoa Mill Products, Inc.

Russel Shute, IHM The Boeing Company

Nicholas Torgerson, S, HS Force America, Inc.

Chris Wolpert, PT, IHT Alcoa Mill Products, Inc.

Rodney Perry, HS The Trane Company

Eric Slaughter, HS DTS Fluid Power, LLC

Chris Treadwell, S, PS Ace Hydraulic Sales & Service, Inc.

John Woolridge, S, HS

Zachary Peterson, HS

John Snyder, IHT

Brian Quayle, IHT Alcoa Mill Products, Inc.

Thomas Spaeder, PT Alcoa Mill Products, Inc.

Gregory Quenemoen, S, PS

Curt Sporrer, HS Hagie Manufacturing Company

Zach Ollman, S, PS Andrew Marino, S, HS Kenneth McCurdy, HS Michael McFall, IHT Shawn McNevin, S, HS Cesar Meza-Soria, HS Hydraquip Custom Systems, Inc. Nathen Moore, IHM The Boeing Company Karl Moritz, HS Hagie Manufacturing Company

Chad Reynolds, MHM Terex Utilities, Inc.

Alex Morlock, S, HS Force America, Inc.

Wade Sprengeler, S, PS

Christian Trivelli, IHM The Boeing Company David VanDenHouten, PS Hydraulic Supply Company Cameron VanSant, HS Alfred State College

View Certification testing locations on page 42

Nicholas Steen, S, PS

Circle 441

Circle 442

July/august 2013

17

IFPS

Become an IFPS Accredited Instructor or Job Performance Proctor IFPS accredited instructors (CFPAI) are certified professionals who educate and prepare candidates for IFPS certification programs. Accredited Instructors have extensive backgrounds and instructional experience in the fluid power industry. In addition to their instructor accreditation, they are committed IFPS members and hold various IFPS certifications. Job Performance Proctors are individuals who hold various IFPS certifications and proctor the job performance portion of Mechanic, Technician, and Connector/Conductor hands-on tests.

Accredited Instructor Training Workshop

Connector and Conductor (CC) Job Performance

August 5-6, 2013 CFC Solar, Inc. • Fairfield (Cincinnati), OH Registration Deadline: July 8, 2013 Fee: $350

Training Workshop*

Job Performance Training Workshop

August 7, 2013 CFC Solar, Inc. • Fairfield (Cincinnati), OH Registration Deadline: July 8, 2013 Fee: $160

August 8, 2013 CFC Solar, Inc. • Fairfield (Cincinnati), OH Registration Deadline: July 8, 2013 Fee: $160 *Candidate must hold Connector and Conductor certification.

Visit www.ifps.org for more information or call 800-308-6005.

IFPS Calendar Visit www.ifps.org for registration information.

Meetings and Conferences IFPS 2013 Annual Meeting September 25 - 28, 2013 Adam’s Mark Hotel, Buffalo, NY Fluid Power Systems Conference November 19-21, 2013 Doubletree Hotel, Rosemont, IL IFPE 2014 Annual Meeting January 28 – February 1, 2014 Orlando, FL IFPE 2014 March 4-8, 2014 Las Vegas, NV IFPS 2014 Annual Meeting September 24-27, 2014 Charleston, SC

Accredited Instructor and Job Performance Proctor Workshop Accredited Instructor Training Workshop August 5-6, 2013 Cincinnati, OH Job Performance Proctor Workshop August 7, 2013 Cincinnati, OH Connector and Conductor Job Performance Workshop - August 8, 2013 Cincinnati, OH

Certification Review Training Mobile Hydraulic Mechanic (MHM) Review w/ Job Performance Test Review and testing offered through CFC-Solar, Inc. Fairfield, OH / October 7-10, 2013 Industrial Hydraulic Mechanic (IHM) Review w/ Job Performance Test Review and testing offered through CFC-Solar, Inc. Fairfield, OH / August 13-16, 2013 Hydraulic Specialist (HS) Certification Review Review and testing offered through ERHCO, Inc. Salt Lake City, Utah Review: July 22-24, 2013 Written test: July 25, 2013 Distance Learning Review Sessions offered through CFC-Solar, Inc. October classes available.

Review and testing offered through CFC-Solar, Inc. Fairfield, OH / December 2-3, 2013 Review and testing offered through Eaton Corp.

November 19-21, 2013 / Eden Prairie, MN Pneumatic Specialist (PS) Certification Review Distance Learning Review Sessions offered through CFC-Solar, Inc. Fall 2013 classes available.

Electronic Controls Specialist (ECS) Review and testing offered through CFC-Solar, Inc. Fairfield, OH / September 16-19, 2013

18

www.fluidpowerjournal.com | www.ifps.com

Job Performance Review With Job Performance Test (Mechanic & Technician) Review and testing offered through IFPS Chapter 49/50, Orlando, FL Review: September 12-13, 2013 Job Performance Test: September 14, 2013 E-mail: florida49er@ifps.org

Web Seminars July 18, 2013, 12:00 p.m. - 1:00 p.m. EST “Task and Outcome - Hydraulic Specialist” Presented by: Gregory George, CFPAI, Walt Disney World Co. September 13, 2013, 12:00 p.m. - 1:00 p.m. EST “Task and Outcome - Industrial Hydraulic Technician” Presented by: Stephen West, CFPAI, Ivy Technical Community College October 17, 2013, 12:00 p.m. – 1:00 p.m. EST “Beat the Leak: Best Practice Approach to Becoming Connector and Conductor Certified” Presented by: Gwyn O’Kane, CFPAI/AJPPCC, Pirtek USA November 7, 2013, 12:00 p.m. - 1:00 p.m.

“Task and Outcome - Pneumatic Specialist” Presented by: Bill Hotchiss, CFPAI, SunSource December 4, 2013, 12:00 p.m. – 1:00 p.m. EST “Slip-In Cartridge Valves” Presented by: Jim Lane, CFPAI, Motion Industries, Inc.

product review Magnetic Gripper Ê The Magnetic Gripper EGM maintains high holding forces even in confined workspaces. It is lightweight, yet powerful enough to handle difficult applications even in situations that may require an emergency stop. It promotes energy efficiency because electricity is only needed for magnetization and demagnetization of the unit. The system is able to lift different types of ferrous items (plates, sheets, round bars, pipes, etc.) by using a permanent electro-magnetic field. The magnetic action may be activated and deactivated by using a switch or digital input, which automatically alters the product’s internal magnetic state.

SCHUNK

www.schunk.com

CAN-2 Receiver

Magnetek, Inc.

www.magnetekmobilehydraulic.com

.D. O

Circle 434

Stringent Testing, °73

‰ The Enrange™ CAN-2 receiver makes adding wireless control to any “CAN-bus” controlled machinery simple and easy. It has two redundant Machine Stop outputs, two CAN-bus ports, and offers the choice of 400 MHz, 900 MHz, or 2.4 GHz RF channels. The optional Radio Control Programmer (RCP) allows users to easily program settings from a Windows PC. The compact design is rugged enough to handle outdoor environments, and the quick responses allow for precise control.

Zero Failures.

The only flare solution for

High-Pressure Coupling

“Leak-Free”

.

O.D ° 37

fittings

Before Flaretite

° 37

Ê An alternative to staple-lock couplings, the iLok™ couplings can be connected to long-wall mining machinery in seconds and disconnected in under two minutes to save 90% of the labor hours required to move equipment from one coal seam to another. Workers disconnect the couplings by cutting and removing the cable lock and turning the swivel nut two-and-a-half times by hand, instead of prying staples loose with crowbars or hammering equipment. The couplings withstand high-impulse applications, release residual pressure away from workers during disconnection, and are compact and smooth to prevent sagging and abrasion.

.

O.D Visit our website for

810-750-4140 Gates Corp. www.gates.com

After Flaretite

FREE

samples!

www.flaretite.com Circle 443

July/august 2013

19

people in the news

Douglas Joy Heraeus Sensor Technology USA ‰ Douglas Joy has been appointed general manager. His duties include operations, P&L, sales and marketing responsibilities, and directing the North American operation of Heraeus Sensor Technology GmbH through a team of managers to ensure customer and employee satisfaction.

Kevin Jeray Marmon/Keystone LLC ‰ Kevin Jeray has been named account manager for the west coast sales team. Mr. Jeray will service customers in the Portland area, as well as the entire state of Oregon.

He brings 14 years of steel industry experience in both value-added sales and outside sales.

Jim Lang Konecranes Training Institute ‰ The Association of Iron and Steel Technology has nominated Jim Lang from Konecranes Training Institute for the 2013 Crane Innovator of the Year award. The award recognizes the individual who has brought forth the latest in technology or increased efficiencies in operational and maintenance practices for the continuous improvement of heavy industrial cranes.

Wade Pierce Pierce Sales ‰ Wade Pierce of Pierce Sales has taken on the position of marketing manager for Lodar USA to provide consistent service to customers and distributors. Pierce will focus on building stronger relationships with existing customers while seeking new markets for the company’s expanding product range.

CORRECTION: In the May/June issue, the new titles for Robert S. Clippard and Jennifer Clippard-Caunin were omitted. It should have stated that Robert is now vice president, sales and marketing, and Jennifer is vice president, human resources.

RE PA ES M CO PRIC R OU

WE A IM PLEA TO SE

GREAT PRICES

DELIVERY IN DAYS INSTEAD OF MONTHS 250CC pumps with on-board eleCtroniC Controls

MS

SH WA R A

E ST SY

C

!

NEW

MOBILE

DFC

AGRI MARKETS

the new QuAntum PumP Features: OFF-ROAD

ICS

INDUSTRIAL

L AU DR

HY

20

 FAstest LeAd tIme In the mArket  sIgnIFIcAntLy Low PrIcIng  200 to 300cc consisting of a large over-center variable piston pump and a fixeddisplacement helical pump.

 AvAILAbLe wIth on-boArd eLectronIc controLs.  Performs best in the 3,000 (rated) and 3,600 (intermittent) pressure range.

Give us a call: 1-800-988-1276 or 864-638-5544 www.dynamicfc.com

ALA IndustrIes LImIted 1150 Southpoint Drive, Suite D  Valparaiso, IN 46385-6236 Phone: 877-419-8536  Fax: 219-477-4194 info@alaindustrieslimited.com

Circle 444

Circle 445

www.fluidpowerjournal.com | www.ifps.com

economic report

product review

Global Manufacturing Update

By Chad Moutray, Chief Economist, National Association of Manufacturers

May 10, 2013 – Last week, we learned that the U.S. trade deficit narrowed in March. While the headline number might seem positive at first glance, the trade gap shrunk on declining levels of both exports and imports. This report was one of the more disappointing ones of late. After slowing to 5.5% growth in 2012, manufactured goods exports have eked out only a 1% gain in the first three months of 2013 so far. The data suggest that export sales have essentially stalled. The largest weakness is in the European market, but exports to Canada— our largest trading partner—also declined. Asia and South America saw the largest gains, with manufactured goods exports to China up 9.3% during the first three months of this year relative to the same time period last year.

There has been considerable weakness in U.S. manufacturing data during the past few months, with the Institute for Supply Management’s Purchasing Managers’ Index (PMI) decelerating and manufacturing employment unchanged in April. Regional sentiment surveys have also suggested softness in the sector, including higher taxes, tighter government spending, and regulatory uncertainties. Nonetheless, our largest trading partners continue to see slower sales, with discouraging export numbers highlighting the slowdown.

Economic reports internationally also showed weakness. The JPMorgan Global Manufacturing PMI decreased from 51.1 in March to 50.5 in April, signifying very sluggish growth in production, new orders, and hiring worldwide. Four of the top 10 markets for U.S.-manufactured goods have declining manufacturing activity levels, with three of those markets being in Europe. Moreover, the other six markets are growing at a very gradual pace. GDP, industrial production, and employment data mirror these findings, with a deepening recession in Europe, slower-than-expected growth in China, and notable decelerations in Canada and other major trading partners.

Excerpt reprinted with permission. For the full report, visit www.nam.org.

Mid-Pressure Range Pump ΠThe V40M axial piston pump has been designed for open circuits in mobile machines and has a displacement volume of 2.75 in.3/ rev. Its swash plate design allows for easy finetuning of the flow rate. With a self-priming speed of 2,900 rpm, it is suitable for applications that require operating pressures up to 3,625 psi but can handle pressure spikes up to 4,600 psi. The pump is connected to the PTO or directly to the motor by an SAE-B flange.

It is available with load-sensing and electric proportional controllers, and is designed to integrate with the company’s modular line of valves.

HAWE Hydraulics www.hawehydraulics.com

Electronic Pressure Switch ‰ The MEP switch offers advanced control to improve safety, extend equipment lifecycles, and reduce maintenance costs. The singleswitch output version features customized hysteresis and is time constant. It also offers protection against short circuits, incorrect wiring, and overloading. The dual output version includes both switch and analog outputs.

Both versions can be supplied with a pulse snubber to protect the sensor in applications exposed to cavitation, liquid hammer, and pressure peaks.

Danfoss www.danfoss.com The National Association of Manufacturers (NAM) represents small and large manufacturers in every industrial sector and in all 50 states. For more information, visit www.nam.org.

July/august 2013

21

NEW Pneumatic Control Devices Catalog Clippard Instrument Laboratory, Inc. {Circle 488}

Summer Literature Review { Special Advertising Section }

Clippard, a manufacturer of the most complete line of miniature pneumatic products, offers a 356-page full product line catalog with technical information, product applications, and more. It includes features, specifications, photographs, and technical drawings for over 5,000 standard products. It's your complete source for miniature fluid power products.

Request your free copy today!

Clippard Instrument Laboratory, Inc. 7390 Colerain Avenue Cincinnati, OH 45239 877-245-6247 www.clippard.com/literature

A10V Piston Pumps FluiDyne Fluid Power {Circle 489}

haskel international, llc. {Circle 490}

FluiDyne Fluid Power provides replacement A10V Piston pumps to distributors and OEMs all around the world. These high quality pumps come with a full range of options including seals, mountings, shafts, compensators, thru-drives, etc.

Our customer service team provides what you want, when you need it. Most pumps ship same day or next. Give our Customer Service Team a call to assist you with your hydraulic needs!

The NEW pump selection program features the entire selection of Haskel pneumatically driven pumps. An easy to use Pump Selection Wizard calculates pump selections from user input, displays complete specifications, and can also provide side by side pump comparisons. An RFQ Cart is provided for users to easily forward requests for quotes to Haskel. Access the tool at www.haskel.com or http://liquidpumpcatalog.haskel.com.

FluiDyne Fluid Power 586.296.7200 sales@fluidynefp.com www.fluidynefp.com

2013 Kit Catalog

Hydac Mobile equipment

Hercules Sealing Products {Circle 491}

hydac international {Circle 492}

The Hercules速 2013 Kit Catalog contains over 1000 pages of hydraulic and pneumatic seal kit information for both industrial and mobile applications. Complete cylinder repair kits are available for over 150 different brands of equipment including: Construction, Industrial Plant, Mining, Paving, Agriculture, Refuse, Forklifts, Crane and Dump Bodies. Popular kits include Caterpillar速, John Deere, Komatsu速, Volvo, Parker, Miller, Hydro-Line速 and many more.

Pump, motor and valve kits are also available for popular brands. To order this free catalog or to place your order online, visit www.

HerculesUS.com/FluidPowerJournalLR.

22

haskel pneumatic pump ecatalog / selector program

Hercules Sealing Products Clearwater, Fl 866-625-0542 fax: 800-759-6391 www.HerculesUS.com

www.fluidpowerjournal.com | www.ifps.com

HYDAC, a global leader in hydraulics and electronic control, provides custom solutions to meet the unique needs in the Mobile Equipment/Construction industry. HYDAC solutions increase efficiency, longevity, and safety even under extreme conditions. All types of equipment share the need for cost-effective performance. HYDAC responds to that need with the highest quality products and our commitment to complete customer satisfaction.

http://www.hydacusa.com/broch.htm

summer Literature Review

|

Special Advertising Section

Product line overview catalog

Compressed Air Filtration

Hydraulics International, Inc. {Circle 493}

La-Man Corporation {Circle 494}

For over 35 years, Hydraulics International (HII) has been the world’s leading manufacturer of pneumatically driven, high pressure liquid pumps, gas boosters, air pressure amplifiers, valves, accessory equipment, turbine flow meters, and packaged systems. HII’s air driven liquid pumps offer the most comprehensive range of models in the industry whether measured by ultimate pressure, flow, or by fluid compatibility.

Request a free copy today!

DISTRIBUTOR ENQUIRIES WELCOME

sP-100B

air driven Standard

system packages

for high pressure:

air

gas

liquid

contents • • • • • •

Standard Liquid Pump Packages Standard Gas Booster Packages Standard Air Pressure Amplifier Packages Custom Units - Examples HII Overview Other Literature

2, 3 4, 5 6 7 7 8

Brochure offers a comprehensive overview of the company’s complete line of compressed air filtration products. Highlighted is the patented family of Extractor/Dryers. These two-stage, point of use filters remove contaminates to a 5-micron rating with flow ranges of 15 to 2,000 scfm.

Additional products available include the SuperStar Membrane Dryer, .01 Micron Filter, Refrigerated Extractor/ Dryer, and much more.

www.hiigroup.com Chatsworth, California, USA

For more information call 818-407-3400, visit www.hiigroup.com, or e-mail lturner@hiipumps.com

La-Man Corporation (800) 348-2463 www.laman.com

Hydraulic Flanges and Components

Stainless Steel Window Flow Sights

Main Manufacturing Products {Circle 495}

Oil-Rite Corporation {Circle 496}

Catalog includes the popular styles of MAIN Manufacturing’s extensive offering of Hydraulic Flanges and Components – ready for immediate shipment. Dimensional drawings, part numbers, metric and weld specifications included. The “Quick Reference Guide” helps specify less popular items often stocked or quickly manufactured at our US plant.

MAIN Manufacturing Products, Inc. Grand Blanc, MI (800) 521-7918; FAX: (810) 953-1385 E-mail: info@mainmfg.com Web: www. mainmfg.com/fpj

Window flow sights are primarily used in low pressure oil lines to allow visual observation of liquid flow, clarity, and condition. Corrosive resistant properties make stainless steel suitable to a variety of applications. Oil-Rite 303 stainless steel window flow sights can be installed in any direction and are available with or without a ball indicator. Made in the USA. Oil-Rite Corporation PO Box 1207 Manitowoc WI 54221-1207 Phone: (920) 682-6173 Email: sales@oilrite.com www.oilrite.com

Schroeder Industries Fuel Filtration

Hydraulic Live Swivels Catalog

Schroeder Industries {Circle 497}

Super Swivels {Circle 498}

Schroeder Industries, an ISO 9001: 2008 certified company, designs, manufactures and markets a complete range of Advanced Fluid Conditioning Solutions™. Our Fuel Filtration Catalog features filtration products to help achieve rigorous new diesel fuel quality standards as well as biodiesel purification systems for increased fuel quality. For a PDF version, please visit our website at: www.schroederindustries.com 580 West Park Road Leetsdale, PA 15056-1025 Phone: 1.800.722.4810 Fax: 724.318.1200 www.schroederindustries.com

Inline and 90˚ hydraulic live swivels.

Available in sizes from 1/8" to 2-1/2", rated to 10,000 PSI, heat treated, superior quality alloy steel, chrome or stainless steel ball bearings, withstands heavy side loads, burnished (micro smooth) barrel bores, Viton®, Aflas®, or Teflon® encapsulated seals, zinc or nickel plated, available in 440 stainless steel, full flow - low pressure drop, rebuilding kits available.

Super Swivels Phone: (763) 784-5531, Fax: (763) 784-7423, Website: www.superswivels.com

Switch Your Swivel!

®

Hydraulic Live Swivels

Available In BSPP

Inline & 90° Swivels Heavy Duty Ball Bearing, Rebuildable Design

www.SuperSwivels.com Email:

sales@superswivels.com

763-784-5531 Fax:

763-784-7423

20101

July/august 2013

23

HOSE, TUBE & PIPE CLEANING & SEALING and AIR PURIFICATION PRODUCTS Ultra Clean Technologies {Circle 499}

Summer Literature Review { Special Advertising Section }

Request our current 2013 Product Catalog for the latest information on our HOSE, TUBE & PIPE CLEANING and SEALING SYSTEMS and AIR PURIFICATION PRODUCTS. Our CLEAN EASY products strip out internal contamination from hose/tube assemblies using special foam projectiles and a pneumatic launcher. SEAL EASY features Clean Seal System machines and Clean Seal Capsules to protect cleaned hose/tube assemblies using a unique heatshrink method. BREATHE EASY includes a full line of Desiccant Breathers to filter contaminants and remove corrosive water vapor from air. Benefits all Heavy Duty Markets, including Construction, Mining, Marine, Offshore, Hose & Tube Assembly.

Hydraulic Fittings and Tubings

YOUR CYLINDER SOURCE

World Wide Metric Inc. {Circle 500}

The 288-page General Catalog features a range of metric and industrial fittings / tubing. Providing information on DIN2353, SAE J514, BSI 5200 adaptors and nonreturn valves, as well as metric steel and stainless hydraulic tubes including DIN2391, DIN2445, and ASTM A269 Standards.

All steel fittings and tubes are available with Chromium VI Free (CR6Free) plating. Stainless tubes are available with a polished and unpolished finish. This catalog features the B4 ring, a six-point sealing compression ring interchangeable with DIN2353 fittings.

855-CALL WWM (855.225.5996) www.worldwidemetric.com sales@worldwidemetric.com

EX Series Planetary Gearbox

Yates Industries, Inc. {Circle 501}

All Designs, All Sizes, One Result.

Yates Cylinders – an ISO-9001:2008 company with facilities in Michigan and Alabama – is your top-quality supplier for all cylinder applications. Hydraulic, pneumatic, NFPA, millgrade, or custom engineering – you name it, Yates can handle it. Complete catalog available. We also maintain an unmatched repair program used by the biggest names in the American Industry. www.yatesind.com Yates Industries, Inc. 23050 Industrial Dr. E. St. Clair Shores, MI 48080 ph 586.778.7680 fax 586.778.6565

24

www.fluidpowerjournal.com | www.ifps.com

Yates Industries South, LLC. 55 Refreshment Place Decatur, AL 35601 ph 256.351.8081 fax 256.351.8571

Filtration, Manifolds, Valves, & Accessories

Young Powertech, Inc. {Circle 502}

As the new Exclusive Partner of STM for North America, we are able to introduce the Efficient, Durable and Energy Efficient EX Series Planetary Gearbox. With torques ranging from 1000nm to 85,000. The STM EX Planetary Gearbox is ideal for many applications including Marine, Mobile and Fixed. Features Include: • Ratios from 1:3.5 up to 1:2500 • Torques range from 1000nm to 85,000nm • Suitable for continuous, reversing and intermittent operation • high torque in relation to size • compact design • can be installed in any mounting position 888-465-3561 • ATEX Certified info@youngpowertech.com • High Radial Load www.youngpowertech.com • Low noise levels

Ultra Clean Technologies 1274 Highway 77 Bridgeton, NJ 08302 800-791-0111 or 856-451-2176 www.ultracleantech.com

Zinga Industries Inc. {Circle 503}

Zinga Industries is a leading manufacturer of mobile hydraulic oil filters, tank accessories, and manifolds.

From 5 PSI to 6000 PSI, tank top or spin-on, we have a filtration product to meet your needs. Hydraulic manifolds are custom designed for your specific application. Tank accessories are the best available, and standard equipment with major OEM’s. We are an ISO registered company, celebrating 35 years in the hydraulic filtration Industry (1976 -2011). www.zinga.com

Zinga Industries, Inc. • 2400 Zinga Drive • Reedsburg, WI 53959 • U.S.A.

(608) 524-4200 www.zinga.com

The Fluid Power Educational Foundation (FPEF)'s scholarships help young people enrolled in high schools, technical colleges, and engineering schools pursue their interests in fluid power. The FPEF Board of Trustees would like to congratulate the following students who were awarded $2,000 scholarships for the Fall 2013 semester:

Circle 446

HII

Hyd HY ra DR AU ulics In LIC ter nat PU MP ional, Inc S& .

SY STE MS

• Jeffrey Benson, Hennepin Technical College, Eden Prairie Campus • John Bobrowski, Oakland University • Ty Bowen, Minnesota West Community and Technical College, Granite Falls Campus • Margaruette Finney, Hennepin Technical College, Brooklyn Park Campus • Nick Freeman, Minnesota West Community and Technical College, Granite Falls Campus • Cody Garner, Hennepin Technical College, Eden Prairie Campus • Eric Haase, Alfred State College • Brad Kruse, Iowa State University of Science and Technology • Michael Matteson, Hennepin Technical College, Brooklyn Park Campus • Michael Monsour, Hennepin Technical College, Eden Prairie Campus • Joshua Neal, Nashville State Community College • Nicholas Nehring, Hennepin Technical College, Brooklyn Park Campus • Dillon Paulson, Hennepin Technical College, Brooklyn Park Campus • Anthony Rupar, Hennepin Technical College, Brooklyn Park Campus • John Schubert, Hennepin Technical College, Eden Prairie Campus • Lucas Stefanick, Minnesota West Community and Technical College, Granite Falls Campus • Ryan Trenda, Hennepin Technical College, Brooklyn Park Campus • Andrew Van Beusekom, Hennepin Technical College, Eden Prairie Campus

If you would like to learn more about FPEF’s initiatives or to make a donation to the Fluid Power Educational Foundation, please visit www.fpef.org or call FPEF headquarters at 856-424-8998.

HYD-3211

HIGH-PRESSURE PNEUMATICALLY OPERATED Used for:

• Pressure Testing Tube & Hoses • Operating Hydraulic Jacks • Powering Crimping & Riveting Tools • Bolt Tensioning • Hydraulic Clamping • Autofrettage of High Pressure Components

9201 Independence Ave., Chatsworth, CA 91311 USA (Phone) 818.407.3400 | (Fax) 818.407.3428 www.hiigroup.com Circle 447

July/august 2013

25

professional development

Tour de Force: How to Get Much More Out of Your Customer Tours Often a conversation with your customer isn’t enough.

When you want to provide great new products that truly add value, you need to see what your customers need.

As

By Dan Adams

a B2B supplier, you can approach new product development one of two ways: you can ask your customers what they want or you can find out what they need. Of course, the sure-fire way to success is to address their needs in ways they may have never thought possible. And there’s no better way to do that than by touring their facilities.

The name of the game is to find ways to help your customers that they wouldn’t think to tell you about. When you can tour the facility, you get a look at not only your customers’ general operations but also how they use your products. Specifically, you’ll gain a unique perspective. You’ll see everything with fresh eyes, and as a result, you’ll discover where your company and its products can really add value.

When taking customer tours, vendors should be focused on helping their customers in two ways: 1. To gain context for the voice-of-the-custom-

er interview, which ideally will take place right after the tour. With this information, the vendor will be able to ask much better probing questions to understand their customers' needs once they’ve observed the customers' processes firsthand.

2. To look for potential areas of improvement that will benefit the customers.

Keep in mind that you shouldn’t blurt out a recommendation as it comes to you. Let “search now, solve later” be your motto while on customer tours. Still, there’s a good chance your “fresh eyes” will be able to spot workarounds (temporary, sub-optimal fixes) and other areas you could help them improve later.

Of course, performing more effective B2B customer tours will require you to make some changes and acquire new skills.

For years we struggled with ways to help our clients improve their B2B customer tours.

We’d seen too many tours where active thinking seemed to end once everyone had adjusted their hardhats. Then, three years ago, we devel-

oped a new tour methodology called AMUSE, which stands for Accelerate activity, Minimize input, Upgrade output, Simplify transition, and Eliminate activity.

Learn more about this customer tour boosting methodology and how to make it work: Start by getting a preview. All customer processes are made up of a series of activities. This is true of a factory process like paint-making, fieldwork like house-framing, or a service like computer help-desk support. Ask your customer tour guide to help you draw a sketch of their operation before the tour. This helps you identify these activities, as well as a) their purpose, b) their sequence, and c) key inputs. Then apply AMUSE methodology to each activity in the process, striving for improved customer outcomes. And remember, during the tour, you might be only thinking about these outcomes.

The time for asking questions will come later.

Break up the workload. Hopefully, you’re not going into your customer tour alone, so use everyone in your group. We teach a meth-

leak-tightness with long-term benefits!

HN 8-WD: Leak-tightness is critical for hydraulic applications. That is why our HN 8-WD plugs are most frequently used by mobile hydraulics and drive engineering worldwide. The plugs with integrated

www.heinrichs-usa.com

elastic sealing form-ring are easy to assemble and tight. Available with FKM or NBR, from M 6 to G 2½", in yellow zinc and Cr-6-free plating. A precise and efficient solution!

Heinrichs USA LLC | mail@heinrichs-usa.com Circle 448

26

www.fluidpowerjournal.com | www.ifps.com

It’s our turn!

About the Author:

odology in which your team would consist of a Moderator, Note-taker, and Observer. To make the tour more manageable, break the workload down. The Moderator might focus on “accelerate” for each activity, the Note-taker on “minimize” and “upgrade,” and the Observer on “simplify” and “eliminate.”

Follow AMUSE. The easiest way to understand AMUSE is to see what it would look like in practice.

Imagine you make nail guns and you’re observing their use on a house construction site. The activity you’re observing at the moment is overhead nailing. How might you apply AMUSE methodology to help the customer (later) with this activity?

Accelerate Activity.

Basic Questions: How could we make this activity go faster, thereby reducing labor costs and increasing capacity?

Real-World App: What if you lowered the weight of the gun? Would the framer be going faster by the end of a long day?

Minimize Input.

Basic Questions: How could we reduce the costs of material, capital, and energy applied to this activity?

Real-World App: Would a higher-powered gun let the worker use cheaper studs full of tough knot holes?

Upgrade Output.

Basic Questions: How could we improve the output from this activity, e.g., reducing defects or improving ultimate customer benefits?

Real-World App: One way to upgrade output would be to lower defects—nails that don’t fully embed—perhaps by having the gun sense resistance and adjust for it?

Simplify Transition.

Basic Questions: How could we streamline the transition between two activities, thus reducing inventory and lead times?

Real-World App: Maybe the framer’s next activity is to set the gun down on the floor. What if you designed a hanger on the gun? Could it cut down on a lot of unnecessary bending?

Dan Adams is all about B2B product development: His free e-book, 12 New Rules of B2B Product Launch (free download at www.b2bproductlaunch.com/ebook), boosts launch success, and his 2008 hardcover book, New Product Blueprinting: The Handbook for B2B Organic Growth (www. newproductblueprinting.com), clarifies the “fuzzy front end” of innovation. As president of Advanced Industrial Marketing, he conducts training workshops in every region of the world.

You can learn a great deal by watching workers perform tasks, observing posted production records, looking at the rework area, and asking relevant questions. Tours are truly the windows into what’s going on with your customers and how they’re using your products. When you can maximize the amount and quality of information you get from them, you can make better products that truly work for your customers— that’s great news for them and you!

UNIQUELY OURS ACCUMULATORS: • Bladder • Piston • Diaphragm HYDAC has become the first US manufacturer capable of producing bladder, piston and diaphragm accumulators in the United States.

Our customers can have it all – superior engineering producing state-of-the-art products in record time. That’s customer service!

Eliminate Activity.

Basic Questions: How could we totally eliminate an activity—perhaps by combining two or more activities—to reduce overall costs?

Real-World App: Most studs have 14.5 inches between them. Was the framer’s preceding activity using a tape measure? If so, you might eliminate it by building a 14.5-inch guide into the nail gun.

Are these all great solutions? Probably not.

But what if your customer interview teams were highly skilled in these observational methods?

Would they ask better probing questions during interviews? Would they uncover new ways to help customers? Would this give your company a competitive advantage?

When time matters, count on HYDAC! HYD1306-1532

Circle 449

July/august 2013

27

association News NFPA

NFPA’s 2013 Industry and Economic Outlook Conference August 12-14, 2013 • Westin Chicago North Shore, Wheeling, IL

J

oin NFPA at this premier event featuring industry experts that will share the analyses and hard data needed to stay focused on the economic environment of today and tomorrow. Conference content will examine the industry’s economics, market forecasts, and technology breakthroughs likely to impact the fluid power supply chain for years to come. The Industry and Economic Outlook Conference (IEOC) is a great opportunity for NFPA members and non-members to connect—providing one of the best opportunities for networking.

Conference highlights

Economics • Global Economics - An American Perspective, Alan Beaulieu, Institute for Trend Research (ITR) • Global Economics - A European Perspective, John Walker, Oxford Economics

Market Forecasts • Customer Markets Overview - Eli Lustgarten, ESL Consultants, Inc. • Fluid Power Industry Forecast - Jim Meil, Eaton Corp.

• Mobile and Industrial Market Breakout Sessions • Construction Machinery Forecast • Agriculture Machinery Forecast • Heavy Truck Market Forecast • Industrial Markets Overview • Material Handling and Metalworking Machinery Forecast

Networking

To register or learn more about the conference go to: http://www.theieoc.com.

• 6th Annual NFPA Education and Technology Foundation Invitational Golf Tournament • IEOC Welcome Reception at Chevy Chase Country Club • Power of Association Reception and Dinner10:30 AM Page 1 AMETEKAPT10017-R_eBrick-7.625x4.875_FPJ_APT10017 09/11/12

The new 955 eBrik linear displacement transducer.

Price and performance so well balanced, it just might displace potentiometers.

At last, there’s a purely electronic solution to position sensors.

Our new 955 eBrik uses magnetostrictive technology so there’s no contact, no moving parts, nothing to wear out. No erratic position signals. Available in 1" to 72" stroke lengths, it’s economical and versatile enough for many applications, field-programmable, and the perfect replacement for old-style potentiometers. Learn more at our website or send e-mail to gemco@ametek.com.

ametekapt.com ©2012 AMETEK Inc. All rights reserved.

Circle 450

28

www.fluidpowerjournal.com | www.ifps.com

NFPA Innovation Award Recognizes Jude Hueber for Innovative Use of a Hydraulic System in Commercial On-Road Vehicles

T

he 2012 NFPA Innovation Award has been presented to Jude Hueber for innovative hydraulic hybrid vehicle design performed for Lightning Hybrids, LLC. The award is presented annually to individual engineers or technicians to recognize innovative use of fluid power. Hueber received the award at the Transenergy Solutions Green Transportation Conference in Denver, Co. The hybrid hydraulic drive system designed by Hueber and a team of Lightning Hybrids engineers integrates components from various manufacturers with sophisticated software that controls the speed of fixed displacement pumps and accumulator pressures to optimize efficiency for lighter shuttle buses and delivery vehicles. Drivers can monitor system performance on the fly via a dashboard-mounted tablet computer. According to Lightning Hybrids, the system has achieved energy savings, or corresponding emissions reductions, of 33% to 40% over similar vehicles with conventional drivetrains.

The winner was selected by NFPA Marketing Committee volunteers from nominations submitted to NFPA during the application process. In its review of Hueber’s application, the committee acknowledged that the anticipated cost savings from applying the technology of fixed displacement pumps and accumulator pressures will optimize the efficiency for lighter commercial vehicles.

The NFPA Innovation Award is part of an effort to draw attention to advances in fluid power and the advantages of using fluid power by recognizing innovative applications of hydraulics and pneumatics by customers and users of fluid power. To learn more about the Innovation Award program, go to http://www.nfpa.com/fluidpower/ innovationaward.aspx.

Circle 451

Jude Hueber, mechanical engineer, and Tim Reeser, CEO of Lightning Hybrids.

Calendar of Events 2013 Industry & Economic Outlook Conference August 12-14, 2013 Westin Chicago North Shore, Wheeling, IL

2014 NFPA Annual Conference February 3-5, 2014 The Ritz-Carlton, Palm Beach, Manalapan, FL

2013 NFPA Fluid Power Career Fair November 6, 2013 Radisson Hotel & Conference Center, Pleasant Prairie, WI

2014 IFPE March 4-8, 2014 Las Vegas Convention Center, Las Vegas, NV

2013 Fluid Power Systems Conference November 19-21, 2013 Doubletree Hotel, Rosemont, IL

2014 IFPE Fluid Power Zone September 8-12, 2014 McCormick Place, Chicago, IL

Circle 452

July/august 2013

29

Working on stilts: The MPI Resolution at a wind turbine in the Thanet Wind Farm in Kent, England

Continuous jacking system makes installing and maintaining

Offshore wind farm installations rise out of the sea and stop only when high above the waves. These massive systems are absolutely indispensible because they stand firmly on their legs on the seabed, so work can continue even in rough seas.

offshore wind farms

A Question of Precision

safer, more reliable,

The jacking system software provides for the smoothest possible transitions between various operating modes, pressures, and loads—thus helping to reduce wear. It guarantees exact control of all the acceleration and deceleration phases, parallel and opposing cylinder strokes, and smooth transfer of massive loads. In addition, it enables automation transition between the four operating modes: leg lowering, platform lifting, platform lowering, and leg lifting.

The transition between setting down the legs on the seafloor and lifting the platform is particularly demanding because during this transition, the platform follows the rise and fall of the ocean, putting enormous strain on the system. The continuous jacking system hoists the platform out of this critical situation faster than an intermittent lifting system could.

and more efficient

By Bosch Rexroth Corp.

High Degree of Reliability Customers expect service lives of 25 years and more from installation platforms, despite wind, weather, seawater, and enormous loads. To enhance reliability and operational safety, Rexroth engineers maximized fatigue risks through special designs for cylinders and piping. A special ceramic finish, designed for harsh environments, protects the piston rods. The jacking cylinders are equipped with the Ceramax Integrated Measuring System (CIMS). It ensures precise positioning, accurate movement, and exact leveling of the installation platform by transmitting high-resolution data indicating the cylinder’s position.

30

www.fluidpowerjournal.com | www.ifps.com

How the Hydraulic Jacking System Works The jacking system climbs up or down the platform’s legs, much like a monkey. Two yokes surrounding each leg are fitted with sets of holding pins. The first such yoke snaps its pins in place in holes along the leg. The cylinders of this first yoke then lift the platform. By the time the first yoke’s cylinders have nearly reached the end of their strokes, the second yoke has moved into position to insert its set of pins in the mating holes. Those pins at the second yoke now take over the load. The pins at the first yoke retract and the cylinders raise the first yoke so that its pins can again assume the load in the next position. This new continuous jacking system eliminates any interruptions during the lifting or lowering operation.

It thus attains a constant jacking speed of one meter a minute or more.

HYDRAULIC FLANGES AND COMPONENTS "Serving Industry for 50 years"

* SAE 4-BOLT * FLANGE ADAPTERS

* SAE, JIS, DIN * METRIC PORTS

* STAINLESS

* SPECIALS

' M A I N ' A D VA N TA G E S Experience - 50 years of hydraulic experience Availability - Standards & Specials in stock Assistance - MAIN's engineers are part of the SAE, NFPA, and ISO committees

Request MAIN's catalog

WWW.MAINMFG.COM/fpj

A US Manufacturer

MAIN

manufacturing products, inc

PH: 800-521-7918 FAX: 810-953-1385 3181 Tri-Park Drive Grand Blanc, MI 48439

Circle 453

Working Together to Achieve Savings The control software and drive system not only provide higher speed during the lowering and lifting operations, but also reduce power consumption. The system’s HS4P hydraulic controls implement flow control for the jacking system, pressure regulation for the crane or winch, and power control to minimize energy use. Integrating the various hydraulic functions also boosts redundancy and reliability—and the higher performance with lower power consumption reduces the platform’s investment costs. The integrated system also reduces space requirements and weight through secondary-controlled drives for the crane. The new hydraulic continuous jacking system also supports today’s increased demand for installation platforms—and tomorrow’s. The EU Commision anticipates that investment of 200 billion euros across Europe will be devoted to wind farm installation by 2030. There’s still a lot of room to grow for continuous jacking.

For more information, contact Thomas Shickel at thomas.shickel@boschrexroth-us.com or visit www.boschrexroth-us.com.

PC28VQH

S1919V20

V20

Triple Pump

S25V20

S4525V

We are professional after market Vickers Vane Pump engineering, manufacturing and distributing company!

Call us for max Peak 262 to 248 bar high pressure Cartridge Kits!

Scenery Hydraulic, Inc.

909-930-9586 • kai@sceneryhydraulic.com • www.sceneryhydraulic.com Circle 454

July/august 2013

31

Product Spotlight | Pumps & Motors GYSE All-in-one displacement transducer GY Series are high quality highly accurate and non-contact displacement transducers

by SANTEST. GYSE all-in-one is now introduced with positional accuracy of up to 1μm. Analog, SSI, incremetal outputs are available. Improved signal jitter of +/-1.5μm. IP67 Protection.

In U.S: EXSENCO, LLC www.exsenco.com info@exsenco.com

461

463

Screw in cartridges in SAE cavity

Low Speed, High Torque Orbital Motors Genuine Metaris Orbital Motors are your best low speed high torque motor option in an economical and compact design. The motors come equipped with a high pressure shaft seal, come in a range of displacements and we offer multiple flange options including wheel mount. You’ll find that our motors are a perfect fit, form and function replacement for common OEM motors in the market today.

462

Metaris Corp.

A Hydraulex Global Company For more information, call us at 1-800-962-2703 or visit www.orbitalmotors.net

TORQTITE Adjustable Torque Wrenches

Double A® Hydraulics PFG series pumps are available through Fluid Power, Inc. These self-priming, rotary gear type pumps are designed to provide quiet and efficient service. Nominal flow rates at 1725 rpm are from 0.5 to 5gpm, with operating pressures up to 2000 psi, and liquid viscosities of 100 SSU to 1000 SSU. These are suited for hydraulic or fluid transfer applications.

Flaretite’s new adjustable open-end torque wrenches allow all tube and hose ends to be precisely tightened to their correct torque requirements. These new wrenches can be used on all fittings requiring a torque specification.

Developed to compliment Flaretite’s patented flared seals for 30, 37 and 45 degree flare fittings, these wrenches are used by quality conscious mechanics in all industries.

Torque Wrench Benefits: • Five Sizes with ranges from 7 to 500 ft-lbs (10 - 700 Nm).

• Fixed wrench ends with hex sizes (jaw opening) from 7/16” thru 3”. Box ends available as specials.

• Ratchet end and adjustable ends also available.

• Low profile, reversible, spanner design • Precision quality design with +/- 5% accuracy • Shipped with torque rating tables for all common fittings

464

Fluid Press – Distributor ALA Industries Limited Tel. (877) 419-8536 • info@alaindustrieslimited.com

Series PFG Fixed Delivery Gear Pump

Fluid Power, Inc. Blue Bell, Pennsylvania 215.643.0350

32

Fluid Press manufactures a wide variety of cartridge valves and bodies including the above pictured screw in solenoid cartridges in a SAE cavity (up to 40 GPM/5,000 PSI).

Other valve types consist of pressure control, flow control, over-center, sequence, check, flow dividers, hose break, pump unloading, shuttle, gage shut-off, specialty packages for excavators, custom packages and many other valves (up to 80 GPM/6,000 PSI).

www.fluidpowerjournal.com | www.ifps.com

For more information contact: Flaretite, Inc. Fenton, MI, USA Tel: 810-750-4140 • www.flaretite.com

465

Special Advertising Section

ONPP-A sensor

466

CLEAN, QUICK, DRY HOSE & TUBE CLEANING Ultra Clean Hose & Tube Cleaning Systems offer a fast, less invasive and more cost-effective way than traditional flushing methods to clean contaminated hose and tube assemblies. Strip away contamination from the inside of hoses, tubes and pipes in seconds.

Clean oil will stay clean as it reaches those expensive components, preventing failure and system downtime.

Visit www.ultracleantech.com to learn more and download our product literature, including our Product Manual and Clean Seal System brochures.

• ISO 18/16/13 • Four hand-held launchers 1/4” through 1-1/4”, 2”, 3-1/2”, 4-1/2” • Bench Mount Launcher for production environment • Projectile Verification System • Auto Loader for production environment • Clean Seal System for sealing end of hose and tube assemblies

Gefran's ONPP-A sensor is designed for installation on pneumatic cylinders and integrated magnet’s position detection. It recognizes magnet orientation, it calibrates to eliminate any position reading offset. It’s optimized in thickness and length, strokes are up to 900 mm. It doesn’t require mounting brackets. The M8 connector provides a simple voltage output. Accuracy is in the order of 0.05 mm.

Snap Action Micro Switch • • • • • •

T6 & T7 Denison reman or Veljan brand

469

The Denison T6 and T7 high pressure hydraulic vane pumps in the C, D and E frame sizes are gaining momentum in many new applications. FluiDyne Fluid Power provides 100% form fit and function interchanges for these T6 and T7 pumps and cartridge kits. These products ship the same day from our Michigan location to anywhere in the US or Canada. Pumps and cartridge kits are available for Single, Double and Triple pump configurations.

FluiDyne also released the Veljan line of M4 motors and a full range of flange mounted relief and unloading valves, such as the R5V, R5S, and R5U.

T6/T7 Single Vane Pump

Hand Adjustable Uniquely designed for 1M Life cycles Low Pressure Range from 3-135 PSI High Pressure Range from 5-6000 PSI Various Port Sizes Various Options to choose from

PVS sensors, Inc. www.pvs-sensors.com Phone: 1-800-988-1276 Fax: 864-638-0005

Ultra Clean Technologies Corp.

1274 Highway 77 • Bridgeton, NJ 08302 Phone: 800-791-0111 or 856-451-2176 Fax: 856-453-4975 Email: Sales@ultracleantech.com www.ultracleantechnologies.com

467

Visit us at http://www.gefran.com

Excellent Quality At Excellent Prices

468

H6 Heavy Duty Cylinder The Yates Industries H6 Heavy Duty Cylinder is rated for 3000 PSI and features 1½ to 20” bores standard, 22 different mounting options, is JIC-NFPA interchangeable, and can be customized with nearly limitless combinations of rod ends, cushions, couplers, seals, and ports – all backed by our legendary warranty and repair capabilities.

Yates Industries 23050 Industrial Dr. E. • St. Clair Shores, MI 48080 586-778-7680 • www.yatesind.com

T6/T7 Double Vane Pump

Call (586-296-7200) or visit our web site www.fluidynefp.com for more information.

470

July/august 2013

33

Product Spotlight | Pumps & Motors Stops Leaking Hydraulic LInes Save Time • Save Money • Save Labor • Save Oil • No tools required, one hand installation • No expensive hardware needed • No more rags stuffed into hoses • No more messy plastic caps • The ultimate contamination control tool • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% Made in USA

TRANSDUCER CYLINDERS! When the pressure’s on, count on the performance and durability of Peninsular Cylinder Company’s Transducer Cylinders. With proven performance in steel mills, foundries & the lumber industry, Peninsular transducer cylinders prove time and time again to be the best for all of your cylinder applications.

471

FlangeLock™ Contact Mike Pearl at 914.980.8890 or email: mike@flangelock.com • www.flangelock.com

P10V45 Series – 28-45cc Variable Volume Open Loop 21 GPM at 1800 RPM 4000 PSI Max Continuous 5000 PSI Max Intermittent 3100 RPM Max *Direct Mount To Trans.

472

Short Lead Times – Days NOT months Mobile Design – Direct Mount PTO Special Applications – Torque Controls, Thru Drives, Instant Configuration Changes

FEATURES of Peninsular Transducer Cylinders • Provides full-stroke precision position feedback anywhere along the cylinder stroke cycle • Electronics are completely enclosed and protected from harsh and shock prone environments • Embedded transducer technology is available • Serviceable without disturbing tie-rod torque • Optional protective transducer covers permit the use of all rear cylinder mounts Peninsular Cylinder Company 800-526-7968 Phone: 586-775-7211 Web: www.peninsularcylinders.com

Manufacturer of Hydraulic Piston Pumps

14233 West Road • Houston, TX 77041 800-650-3110 • info@deltaq.com www.deltaq.com

Marine Duty Electric Clutches

Electric Clutches for Pumps

Ogura electromagnetic clutches provide a quick and easy engagement of a hydraulic pump, winch drives or other marine components. Available torque range is 100 pound feet to 1500 pound feet with single-face friction designs. Multiple disk units can generate torques over 8,000 pound feet. Large bearings, e-coating and a single piece bi-directional spring provide durability in harsh environments.

Ogura produces a wide variety of electric clutches for mobile applications. These clutches provide simple on/off operation for a variety of pumps. Remotely engaging the pump through the clutch reduces drag on engine start-up, increases pump-life and allows multiple pumps to be used off one engine. Various belt types as well as pump shafts can be accommodated.

Ogura Industrial Corp.

100 Randolph Road • Somerset, New Jersey 08873 Phone: 732-271-7361 • Fax: 732-271-7580 info@ogura-clutch.com

474

34

473

www.fluidpowerjournal.com | www.ifps.com

Ogura Industrial Corp.

100 Randolph Road • Somerset, New Jersey 08873 Phone: 732-271-7361 • Fax: 732-271-7580 info@ogura-clutch.com

475

Special Advertising Section

“AA” FLANGE, 1DG SERIES DOUBLE PUMPS “A” FLANGE, 2DG SERIES DOUBLE PUMPS “B” FLANGE 3DG SERIES DOUBLE PUMPS 2DG and 1DG double pumps available from Houston stock. 3DG series based on factory lead time.

Honor Gear Pumps Corp. of Taiwan, with U.S. warehouse in Houston, is pleased to announce local availability of double pumps in “AA” flange and “A” flange. The “B” flange doubles are available subject to factory lead times. OEM inquiries through distribution are welcome.

In addition to doubles, all single pumps are kept in stock in Houston, in the 4F17, “AA”, “A”, and “B” flange models. Aluminum body with cast iron flanges and rear covers are standard. Standard stock displacements in the 3GB series pump are 2.31, 2.68, 3.17, and 3.66 cu.in./rev. All other displacements are available subject to factory lead times.

477

Lodar now offers a one function wireless option. Turn the power ON/OFF to generators, water pumps, lights or anything that needs to be switched from a distance. The Lodar one function saves you from running expensive wiring and comes with the 5 year pro-rated warranty. Contact Wade at 888-685-6327 or email him at wade@lodar.com for more information.

Stainless Steel Window Flow Sights Window flow sights are primarily used in low pressure oil lines to allow visual observation of liquid flow, clarity, and condition. Stainless steel is known for its non-corrosive and non-magnetic properties. Oil-Rite 303 stainless steel flow sights can be installed in any direction. An optional ball enhances flow visibility.

Stainless

Honor Gear Pumps Corp.

Proudly sold through distribution. Please call to be referred.

Honor Pumps U.S.A. 1601 W. 25th St. • Houston, TX 77008 Toll free: 800-984-9727 • Local: 713-984-8144 Fax: 713-461-9631 • Email: service@honorpumps.com Web: www.honorpumps.com

Lodar Wireless One Function

Oil-Rite Corporation (920) 682-6173 sales@oilrite.com www.oilrite.com

476

478

D03, D05, D07, D08, D10 VALVES & CIRCUIT STACK MODULARS Power Valve U.S.A. represents, as factory warehouse and sales office, a Taiwan manufacturer of D03, D05, D07, D08, and D10 valves, and modular circuit stack valves. With inventory in the Houston warehouse, all products are competitively priced, and machine tool quality. In fact the parent company, Tai Huei Oil Industry Co., Ltd. has been selling valves for over 25 years to the machine tool industry in Taiwan. All standard AC and DC voltages are available, and all standard spool configurations are in stock. Special spools are available. Pressures to 5000psi and flows from 16GPM (D03) to 211GPM (D10) are standard.

With inventory on the shelf and very competitive pricing, we invite your inquiry.

Power Valve U.S.A. Proudly sold through distribution. Please call to be referred.

Contact the company at 1-888-862-1064 or e-mail to service@powervalveusa.com. View basic specifications at www.powervalveusa.com

479

SVQH Series pump SVQH Series fixed displacement single and double vane pumps employ a new rotor design that enhances pressure capability and efficiency over the 20th design SVQ pumps. SVQH cartridge kits are interchangeable with those of SVQ series. In order to accommodate high pressure requirements, the SVQH pump housing is upgraded to ductile iron. OUR PC-S28VQH CART KIT IS DESIGNED FOR 924F/938G WHEEL LOADER REPAIR SERVICE. We are professional after market Vickers Vane Pump Engineering, Manufacturing and distributing company!

Call us for max Peak 262 to 248 bar high pressure Cartridge Kits!

Scenery Hydraulic, Inc. 909-930-9586 kai@sceneryhydraulic.com www.sceneryhydraulic.com

480

July/august 2013

35

Product Spotlight | Pumps & Motors BSPP, BSPT, ISO 6149 Hydraulic Flanges & Couplings

481

482

MAIN Manufacturing Products, Inc. now stocks SAE, JIS, DIN, and ISO flanges and couplings with metric ports. METRIC TUBE & PIPE sizes in socket weld and butt weld are also available. Many can ship directly from stock. If not part of our 7000+ in-stock products, MAIN can manufacture and ship quickly- (4-5 days) is common from our US facility.

MAIN Manufacturing Products, Inc. Phone: (800) 521.7918 E-mail: info@mainmfg.com

New Series! COOL LOOP Offline Fluid Conditioning System

Stainless

Stainless Steel Liquid Level Gages

• Ideal for independent cooling & filtering of system oils • Pump flows ranging from 9.5 gpm to 45 gpm • Low noise screw pump technology transfers a high variety of fluids • Field proven Bar & Plate Brazed Aluminum P-BAR core with optional T-Bar core • Best heat transfer per given envelope size while minimizing pressure drop

Corrosive resistant properties make stainless steel gages suitable to a variety of applications. Oil-Rite offers 304 and 316 stainless steel liquid level gages in sizes from 3” to 60”. A red line on a white background enhances liquid level visibility.

Available with adapters and thermometer. Made in the USA.

Oil-Rite Corporation (920) 682-6173 sales@oilrite.com www.oilrite.com

483

5215 21st Street Racine, Wisconsin 53406-5096 (262) 554-8330 TTPSales@thermasys.com thermaltransfer.com

MODULAR CONNECTORS Inserta® Code 61 and Code 62 4-Bolt Modular Connectors can be customized with optional outlets in order to add flexibility to piping systems. Reduced size flange patterns can be provided on side outlets. Threaded SAE O-ring and NPTF pipe ports are also available on these steel modules. Gauge and test ports can be provided on any custom or standard modular connector.

HyDraw CAD600 Released New: Interface to ERP data, Assign Pipe/Tube Properties, ISO Compliant Solenoid Information and Solenoid Actuation Chart, Auto Update Properties of Components in Drawing, Display Formatted Multi-Property Labels, Specify Port Operating Parameters and Display of Dual Port Names.

Enhanced: Custom Parts List Template in Excel, External Ports with Through Bolt Holes and O-ring, Display Formats, Assign Properties to multiple components, Export to MDTools - Linked CAD data, and Submit designs to QuickManifolds.com.

Vest, inc.

Visit www.VESTusa.com

36

www.fluidpowerjournal.com | www.ifps.com

484

Inserta® Products Blue Bell, PA 215.643.0192 www.inserta.com

485

Special Advertising Section

Protect Yourself Against Corrosion…

YOULI HYDRAULIC DIRECTIONAL CONTROL VALVES

Stop rust on steel pipes, tubes, and fittings today with World Wide Metric’s PCS Tape. This type of maintenance free tape can be applied on new or corroded surfaces requiring minimal surface preparation. Our PCS Tape selection includes 4 different size options from 50mm - 200mm that repels against water, salt, alkalis, and acids in a multitude of applications.

Direct Acting Electric Solenoids...now available: Youli directional control valves, rated to 4600psi, monoblock or sectional styles, are now available from stock in Houston, with electric direct acting solenoids on the MB-4 series, rated to 10GPM. Pneumatic operators are also available on all Youli valves, and also kept in stock. Youli quality is based on 25 years of industrial hydraulic valve manufacturing for the machine tool business in Taiwan. A quality product line with a major commitment to inventory in Houston, Texas, and offered at competitive prices, is growing our reputation.

Youli Hydraulic Industrial Co., Ltd. Proudly sold through distribution. Please call to be referred.

Contact the company at 1-888-330-8041 or email to service@youli-america.com View basic specifications at www.youli-america.com

For more information contact World Wide Metric at 732-247-2300 or email us at sales@worldwidemetric.com.

487

486

® PENINSULAR C Y L I N D E R C O.

PENINSULAR’S PROVEN CYLINDER FEATURES KEEP YOUR PLANT UP & RUNNING !

Circle 455

July/august 2013

37

The 11 trade fairs staged under the umbrella of Hannover Messe 2013, held from April 8-12, 2013, featured the keynote theme of “Integrated Industry.” The 6,550 exhibitors, highlighting a multitude of innovative products and technology solutions, provided a vivid showcase for this theme.

The show’s five core topics: Industrial Automation and IT, Energy and Environmental Technology, Fluid Power and Power Transmission, Industrial Subcontracting, Manufacturing Technology, and Services and R&D, opened up new prospects for expert dialogue across all aspects of Industry 4.0.

Below are some highlights of the event.

Industrial Automation The process technology exhibition area provided comprehensive coverage of topics like pressure, filling level, and temperature measurement, as well as transmission and control engineering, along with a rich program of presentation and discussion forums. The Efficiency Arena offered lectures and debates on all aspects of energy efficiency in industrial processes.

Motion, Drive & Automation (MDA) The exhibitors at MDA focused on efficient and sustainable intelligent integrated system solutions. All the market leaders in the sector were at MDA, with displays including roller bearings, gears, clutches, hydraulic cylinders and subassemblies, filters, valves, sealing systems, oil supply systems, and power electronics. Key topics of the forum were drive technology for wind energy plants, sealing systems, condition monitoring systems, along with sustainability, energy efficiency, and lightweight construction.

Hannover Messe Trade Fairs Highlight Industrial Integration in Crucible of Fourth Industrial Revolution Keynote Theme “Integrated Industry” at Core of Forums, Thematic Clusters, and Competence Centers

38

www.fluidpowerjournal.com | www.ifps.com

Energy Exhibits covered the entire energy supply chain, from generation, grid supply, transmission, distribution, and storage, to the latest IT and market mechanisms for smart grids. The focus was on potential savings and efficiency gains from decentralized energy supply solutions. The Renewable Energy Forum featured presentations on wind and bio energy, photovoltaic systems, and solar and geothermal energy.

Wind Wind power is seen as the driving force among the various renewable energy options. The leading manufacturers, subcontractors, logistics specialists, and service providers were on hand to present their new concept designs and technologies for onshore and offshore solutions.

Higher towers, larger nacelles, longer rotor vanes, and more powerful transmission systems are making wind energy plants more powerful.

Optimized plants for low-wind locations also have a part to play in making efficient use of wind energy.

MobiliTec As the flagship tradeshow for electric drive technologies, mobile energy storage, and alternative mobility technologies, this event provided a comprehensive overview of electric mobility solutions. The eMotive pavilion included cuttingedge electric mobility displays. The MobiliTec user forum included discussion and debate on the latest research findings and trends in energy storage technologies and powertrain electrification. Visitors were also able to test-drive the latest electric vehicles on the extended circuit on the open-air site at the exhibition center.

ComVac Market leaders displayed compressed air and vacuum technology products and solutions— from generation and treatment to distribution and practical applications in systems and machines. The focus was on solutions that consume significantly less electric power and are more maintenance friendly, with lower noise emissions, adding up to clear efficiency gains in production operations. Other sector themes included after-sales segments like maintenance, repair, and service contracts, and consulting and analysis. This included the simulation of compressed air requirements, leakage checks, and audits and evaluation of compressed air systems and finance options.

Industrial Supply The Industrial Supply exhibitors displayed applications and solutions-oriented products and technologies for functions like solid and sheet metal forming, machined components, systems and subassemblies, casting products, latches and locking systems, operating controls, fastening techniques and joining, and adhesive bonding technology. Lightweight construction topics were a special highlight.

FlangeLock™

save time • save money • save labor • save oil

IndustrialGreenTec Exhibitor displays covered environmental technologies focused primarily on the needs and issues facing SMEs from Germany and abroad.

International trade visitors learned from pioneers of sustainable production processes.

Special attention was given to best-practice examples in terms of resource efficiency and the conservation of natural resources.

Research and Technology Technology transfer and partnerships between research and industry were in the spotlight.

Exhibiting institutes, universities, and companies had dialogue with industry and political representatives on the new technologies and improvements that will be needed to successfully address the challenges facing industry.

All the Hydraulic Hardware You’ll Ever Need!

Stops Leaking Hydraulic lines

For more information, visit www.hannovermesse.de.

ALLOYS & COMPONENTS, SOUTHWEST

METRIC

HYDRAULIC CYLINDER TUBES AND RODS • Up to 200mm • Cut to Length • No Minimum Order • Same Day Ship

No tools required No expensive hardware needed No more rags stuffed into hoses No more messy plastic caps The ultimate contamination control tool One hand installation Eliminate hydraulic oil spills & clean up Quick installation & ease of usage Safe for personnel & environment Industry acclaimed 100% Made in USA

RESTORE YOUR METRIC HYDRAULIC CYLINDERS TO “GOOD AS NEW”

For more information contact Mike Pearl at 914.980.8890 or email: mike@flangelock.com

2330 Quincy Street, Dallas, Texas 75212 (214) 637-9301 Fax: (214) 637-9303

• • • • • • • • • • •

www.flangelock.com

This product is Patented, other Patents pending.

National TOLL FREE: (800) 441-1994

Circle 456

Circle 457

July/august 2013

Ads-Hydraulics&Pneumatics.indd 1

39 8/8/07 9:35:24 AM

Energy-Efficient Hydraulics:

Variable Frequency Drives as Pump Prime Movers

ui

d pow er

systems C

on

c

e

I

t is obvious what we want to achieve with variable speed pumps: to save energy and reduce noise and possibly increase the power density of hydraulics.

To explain only how to put the electro-hydraulic package together does not provide enough insight. The total hydraulic system functionality needs to be looked upon in the light of competing technologies.

fl

By Dr.窶的ng.

Gerd Scheffel, Parker Hannifin Corp.

fe r en

In industrial applications, hydraulic pumps are usually driven with electric motors so the conversion to variable speed drives is more of an upgrade than a major modification. In mobile systems, hydraulic pumps are most often driven by internal combustion engines. It is more complicated to use variable frequency drives on mobile equipment because the electricity to drive a variable speed motor needs to be supplied by a generator or a fuel cell and then stored in batteries. While converting from the DC supply to AC for the motor is not technically difficult, adding the power supply would likely lead to a complete vehicle redesign. Nevertheless, it is worth looking at the paradigm shift of introducing variable frequency drives to electrically-generated rotary and linear motion.

Hydraulics is only one of several methods of power transfer. The socalled “electro-hydraulic actuator� may be an interesting solution in some special applications, but not a viable general solution in multiple motion applications. There is additional cost for converting electric power into hydraulic pressure and flow. If this conversion occurs for each of multiple actuators, it will not be cost effective. The conversion should be done in a central power unit and the cost spread over the multiple actuators.

The electric drive should not be seen as competition but as a partner, bringing technological progress and making hydraulics more competitive. Electric drives have made great progress in eliminating gear boxes and converting huge forces into linear motion. There are many examples of full-electric presses that were, in the past, the exclusive domain of hydraulics.

There are different types of electric motors on the market including the induction motor, the permanent magnet motor, and the reluctance motor, each of which needs to be well understood by the hydrau-

lic engineer putting the electrohydraulic pump package together.

In hydraulic linear motion, the asymmetry of a single rod cylinder can be compensated with modern integrated regenerative valves. This needs to be considered to minimize the flow demand from the pump before laying out the electric drive and hydraulic pump package.

The beauty of a three-phase electric grid is the way it generates the rotating field of an electric motor. It only needs the determination of the number of poles in the motor to set the speed. If we insert a frequency inverter and make the speed variable within the lower and upper capabilities of the motor, we only need to choose the motor with the most suitable RPM range to drive our hydraulic pump. Typically the four-pole induction motor or the permanent magnet motor would be the preferred choice.

The motor cooling needs special consideration because it may be required to drive a hydraulic pump at speeds ranging from very low to very high. There are a variety of designs for cooling the electric motor that include heat dissipation through the housing surface, a cooling fan rotating with the motor, a separate cooling fan, and even fluid cooling of the housing. The most common for induction motors is the fan running with motor speed. This solution may be inadequate when running at full torque and low speed and so the cooling needs of the motor will need careful consideration.

There are a variety of hydraulic pumps on the market including gear, vane, and piston pumps. Their speed range under full pressure varies a lot with their frame size.

Generally a smaller pump goes to higher maximum speed and creates less noise. The minimum speed depends more on the pumping principle than on the frame size. A hydraulic pump is lubricated by the

About the Author: Dr.-Ing. Gerd Scheffel joined Towler Hydraulics Germany as chief development engineer for industrial valves and was involved in defining the international standards for slip-in cartridges. Following the acquisition of Towler, he joined Parker Hannifin as engineering manager for industrial valves in Europe. After running a mobile valve unit as operations manager, he became managing director of the Hydraulic Controls

Division Europe, a division producing pumps, motors, valves, manifolds, power units, and electronics.

He managed the division for 23 years. Since the beginning of 2012, he has worked as engineering manager of the Hydraulics Group Europe for Industrial Applications. Contact him at gerd.scheffel@parker.com.

hydraulic fluid. Most pumps need to rotate for proper lubrication and cannot stand still under pressure.

The marriage of the hydraulic pump and the electric motor starts with the selection of the pump and the desired speed for achieving the flow. The torque to turn the pump and thus the motor size depends only on the chosen pump displacement and the pressure. The required drive power is the torque multiplied by the RPM. Higher RPM results in higher power density of the motor and of the pump.

Motors with variable frequency drives as pump prime movers were introduced into the market with the internal gear pump. Small displacement pumps with low inertia can run with flow and pressure control from the motor. High-precision gear pumps that have a single pumping chamber, require strong bearings to keep the gear position within tight tolerances. The typical vane pump with its two balanced pumping chambers and interchangeable cartridge without bearings offers new opportunities. The cartridge can be integrated in a motor with an extended shaft and allows for an extremely compact package. Vane pumps are also available as double or triple pumps in a common housing and can work as a simple switchable pump combination in order to choose the smallest possible motor for the application.

A variable piston pump needs either to stroke in reverse flow direction to decompress, or alternatively, a pressure-compensated pump is

used with a small relief, piloted by the pump controller. A combination of a fixed vane pump with its low losses at low pressure and a variable piston pump with its high efficiency at high pressure is very often the most energy-saving solution.

When putting together the electro-hydraulic package, consisting of drive, motor, and pump, all the inefficiencies get added up, and the target is to minimize. Good results cannot be achieved in a trial-anderror approach. An intelligent software tool is needed that has stored all the individual component efficiencies in relation to their parameters. At first the flow and pressure demand vs. time is entered into the so-called DriveCreater tool. A pump or pump combination is selected.

The motor temperature is calculated at the given machine cycle in continuous-operating mode.

The chosen motor requires a current, and hence a suitable drive is selected. Different solutions can be compared with regard to their consumed energy. A solution with inverter can be compared against running the motor straight from the grid. How much energy is saved in a specific application depends entirely on the machine cycle.

For the startup of the drive, a setup tool is helpful to reduce the amount of programming work. The motor data can be entered from the nameplate, and a preconfigured operating mode, e.g. accumulator charging, p/Q control, or other can be chosen.

See page 11 for information on the upcoming 2013 Fluid Power Systems Conference.

July/august 2013

41

IFPS Certification Testing Locations I

ndividuals wishing to take any IFPS written certification tests are able to select from approximately 325 convenient locations across the United States and Canada. The IFPS is able to offer these locations through its affiliation with The Consortium of College Testing Centers (CCTC) provided by National College Testing Association (NCTA).

To register for an IFPS written certification test: 1. Fill out an IFPS certification test application including your desired location by visiting www.ifps.org.

2. Submit your application with payment to IFPS headquarters.

3. Upon receipt of your application, you will be e-mailed instructions. Testing dates for any locations listed below are as follows: july 2013 Tuesday, 7/2 Thursday, 7/18

august 2013 Tuesday, 8/6 Thursday, 8/15

september 2013 Tuesday, 9/3 Thursday, 9/19

october 2013 Tuesday, 10/1 Thursday, 10/17

november 2013 Tuesday, 11/5 Thursday, 11/21

december 2013 Tuesday, 12/3 Thursday, 12/19

Questions? Please call IFPS headquarters at 800-308-6005 or e-mail Connie Graham at cgraham@ifps.org.

ALASKA University of Alaska Anchorage Anchorage, AK ALABAMA Alabama A&M University Normal, AL Jacksonville State University Jacksonville, AL University of AL in Huntsville Huntsville, AL ARKANSAS Northwest Arkansas Community College | Bentonville, AR ARIZONA Arizona State University Tempe, AZ Arizona Western College Yuma, AZ Coconino Community College Flagstaff, AZ Eastern Arizona College Thatcher, AZ Glendale Community College Glendale, AZ Mesa Community College Mesa, AZ

La Sierra University Riverside, CA National Test Center San Diego, CA National University San Diego, CA Santa Rosa Junior College Santa Rosa, CA Skyline College San Bruno, CA The Taft University System Santa Ana, CA UC San Diego Extension San Diego, CA University of California Irvine, CA Yuba Community College Marysville, CA COLORADO Community College of Aurora Aurora, CO

Florida Atlantic University Boca Raton, FL Florida Gulf Coast University Ft. Myers, FL Florida Memorial University Miami Gardens, FL

Northern Illinois University De Kalb, IL

Georgia State University Atlanta, GA

Parkland College Champaign, IL

University of Georgia Athens, GA

Richland Community College Decatur, IL

University of West Georgia Carrollton, GA

Rock Valley College Rockford, IL

Valdosta State University Valdosta, GA

University of Illinois at Urbana Champaign, IL

HAWAII BYU-Hawaii Laie, HI

Waubonsee Community College Sugar Grove, IL

Florida Southern College Lakeland, FL

IOWA Hawkeye Community College Waterloo, IA

Hillsborough Community College Plant City, FL

University of Iowa Iowa City, IA

Indian River State College Fort Pierce, FL

Wartburg College Waverly, IA

Open Campus Florida Community College at Jacksonville, FL

Western Iowa Community College Sioux City, IA

University of Florida Gainesville, FL

College of Southern Idaho Twin Falls, ID

University of South Florida Tampa, FL

Eastern Idaho Technical College Idaho Falls, ID

Valencia Community College Orlando, FL

Lewis-Clark State College Lewiston, ID

University of Colorado at Boulder Boulder, CO

GEORGIA Albany State University Albany, GA

University of Idaho Moscow, ID

University of Northern Colorado Greeley, CO

Clayton State University Morrow, GA

ILLINOIS College of DuPage Glen Ellyn, IL

CONNECTICUT Yale University New Haven, CT

Columbus State University Columbus, GA

College of Lake County Grayslake, IL

Columbus Technical College Columbus, GA

Illinois State University Normal, IL

Darton College Albany, GA

John A. Logan Community College Carterville, IL

Front Range Community College Larimer Campus | Ft. Collins, CO

Foothill College Los Altos Hills, CA

Daytona State College Daytona Beach, FL

Georgia Southern University Statesboro, GA

Brigham Young University Rexburg, ID

Pima Community College Tucson, AZ

Chapman University Orange, CA

FLORIDA Brevard Community College Cocoa, FL

Lincoln Land Community College Springfield, IL

Santa Fe Community College Gainesville, FL

Fort Lewis College Durango, CO

California State University, Fresno Fresno, CA

University of Delaware Newark, DE

Georgia Gwinnett College Lawrenceville, GA

IDAHO Boise State University Boise, ID

Paradise Valley Community College Phoenix, AZ

California Polytechnic State University San Luis Obispo, CA

Delaware Technical and Community College Georgetown, DE

Polk State College Winter Haven, FL

Community College of Denver Denver, CO

CALIFORNIA Allan Hancock College Santa Maria, CA

Irvine Valley College Irvine, CA

Northern Arizona University Flagstaff, AZ

Rio Salado College Tempe, AZ

42

Fullerton Community College Fullerton, CA

Pikes Peak Community College Colorado Springs, CO Pueblo Community College Pueblo, CO

DELAWARE Delaware State University Dover, DE

www.fluidpowerjournal.com | www.ifps.com

INDIANA Indiana University Indianapolis, IN Ivy Tech Community College/ Bloomington | Bloomington, IN Ivy Tech Community College/ Columbus | Columbus, IN Ivy Tech Community College/ Evansville | Evansville, IN Ivy Tech Community College/Gary Gary, IN Ivy Tech Community College/ Indianapolis | Indianapolis, IN Ivy Tech Community College/ Kokomo Kokomo, IN Ivy Tech Community College/ Lafayette | Lafayette, IN Ivy Tech Community College/ Lawrenceburg | Lawrenceburg, IN Ivy Tech Community College/ Madison Madison, IN Ivy Tech Community College/Muncie Muncie, IN Ivy Tech Community College/ Richmond | Richmond, IN Ivy Tech Community College/ Sellersburg | Sellersburg, IN Ivy Tech Community College/South Bend | South Bend, IN

Ivy Tech Community College Terre Haute, IN

Michigan State University East Lansing, MI

Southeast Community College Lincoln, NE

Southwestern Oregon Community College | Coos Bay, OR

Texas A&M International University Laredo, TX

Purdue University West Lafayette, IN

Schoolcraft College Livonia, MI

University of Oregon Eugene, OR

Texas A&M University College Station, TX

KANSAS Johnson County Community College Overland Park, KS

NEW JERSEY Brookdale Community College Lincroft, NJ

Southwestern Michigan College Dowagiac, MI

Gloucester County College Sewell, NJ

PENNSYLVANIA Bucks County Community College Newtown, PA

Texas A&M University-Commerce Commerce, TX

Mercer County Community College West Windsor, NJ

HACC Gettysburg Campus Gettysburg, PA

Raritan Valley Community College Somerville, NJ

Harrisburg Area Community College Harrisburg, PA

NEW MEXICO Eastern New Mexico University Portales, NM

Harrisburg Area Community College York Campus | York, PA

Kansas State University Manhattan, KS

Washtenaw Community College Ann Arbor, MI

University of Kansas Lawrence, KS

MINNESOTA Minnesota State University, Mankato Mankato, MN

Wichita State University Wichita, KS

University of Minnesota - Twin Cities Minneapolis, MN

KENTUCKY University of Louisville Louisville, KY

University of Minnesota Morris, MN

San Juan College Farmington, NM

Western Kentucky University Bowling Green, KY

MISSOURI Avila University Kansas City, MO

LOUISIANA Bossier Parish Community College Bossier City, LA

Metropolitan Community College-Penn Valley Kansas City, MO

University of Louisiana at Monroe Monroe, LA

Missouri Western State University St.Joseph, MO

Nicholls State University, Thibodaux, LA

Southeast Missouri State University Cape Girardeau, MO

College of Southern Nevada Green Valley Campus Henderson, NV

University of New Orleans New Orleans, LA

St. Charles Community College Cottleville, MO

College of Southern Nevada Henderson Campus, NV

MARYLAND Anne Arundel Community College Arnold, MD

State Fair Community College Sedalia, MO

NEW YORK Brooklyn College - CUNY Brooklyn, NY

Carroll Community College Westminster, MD Chesapeake College Wye Mills, MD College of Southern Maryland La Plata, MD Frederick Community College Frederick, MD Harford Community College Bel Air, MD Hagerstown Community College Hagerstown, MD Howard Community College Columbia, MD University of Maryland College Park, MD MASSACHUSETTS North Shore Community College Danvers, MA University of Massachusetts Boston, MA MICHIGAN Baker College Online Flint, MI Delta College University Center, MI Ferris State University Big Rapids, MI Henry Ford Community College Dearborn, MI Kalamazoo Valley Community College Kalamazoo, MI Lake Superior State University Sault Ste. Marie, MI Lansing Community College Lansing, MI Macomb Community College Warren, MI

Three Rivers Community College Poplar Bluff, MO University of Central Missouri Warrensburg, MO Webster University St. Louis, MO MISSISSIPPI Holmes Community College Goodman Campus Goodman, MS

NEVADA College of Southern Nevada Charleston Campus Las Vegas, NV College of Southern Nevada Cheyenne Campus North Las Vegas, NV

Rochester Institute of Technology Rochester, NY OHIO Central Ohio Tech College OSU-Newark | Newark, OH

MONTANA Montana State University Bozeman, MT

The University of Toledo Toledo, OH

Fayetteville State University Fayetteville, NC Guilford Technical Community College Jamestown, NC Mount Olive College Mount Olive, NC North Carolina Central University Durham, NC The University of North Carolina Wilmington, NC NORTH DAKOTA Bismarck State College Bismarck, ND North Dakota State University Fargo, ND NEBRASKA Bellevue University Bellevue, NE

University of Akron Akron, OH OKLAHOMA Northern Oklahoma College Tonkawa, OK Oklahoma State University Stillwater, OK Oklahoma State University-Tulsa Tulsa, OK University of Central Oklahoma Edmond, OK University of Oklahoma Norman, OK OREGON Central Oregon Community College Bend, OR

University of Texas Brownsville Brownsville, TX University of Texas at Arlington Arlington, TX University of Texas El Paso El Paso, TX

Midlands Technical College Columbia, SC

Weatherford College Weatherford, TX

Orangeburg Calhoun Technical College Orangeburg, SC

UTAH Brigham Young University Provo, UT

Piedmont Technical College Greenwood, SC

Davis Applied Technology College Kaysville, UT

Spartanburg Community College Spartanburg, SC

Salt Lake Community College Salt Lake City, UT

Technical College of the Lowcountry Beaufort, SC

Utah Valley State College Orem, UT

Trident Technical College Charleston, SC

TENNESSEE East Tennessee State University Johnson City, TN

The Ohio State University Columbus, OH

University of Houston Houston, TX

Victoria College Victoria, TX

Franklin University Columbus, OH

University of Mississippi University, MS

Tyler Jr. College Tyler, TX

Horry-Georgetown Technical College Conway, SC

York Technical College Rock Hill, SC

Rhodes State College Lima, OH

NORTH CAROLINA East Carolina University Greenville, NC

SOUTH CAROLINA Coastal Carolina University Conway, SC

Columbus State Community College Columbus, OH

Mississippi State University Mississippi State, MS

The University of Montana Missoula, MT

Harrisburg Area Community College-Lancaster Campus Lancaster, PA

Texas Tech University Lubbock, TX

VIRGINIA Old Dominion University Norfolk, VA WASHINGTON Central Washington University Ellensburg, WA Olympic College Bremerton, WA

Middle Tennessee State University Murfreesboro, TN

Western Washington University Bellingham, WA

Southern Adventist University Collegedale, TN

WISCONSIN Lakeshore Technical College Cleveland, WI

Tennessee State University Nashville, TN The University of Memphis Memphis, TN Walters State Community College Morristown, TN TEXAS Abilene Christian University Abilene, TX Austin Community College Austin, TX Eastfield College Mesquite, TX

Marian University of Fond du Lac Fond du Lac, WI University of Wisconsin Oshkosh Oshkosh, WI University of Wisconsin-Milwaukee Milwaukee, WI WYOMING University of Wyoming Laramie, WY CANADA Lethbridge College Lethbridge, AB Canada

El Paso Community College El Paso, TX

Saskatchewan Institute of Applied Science and Technology Saskatchewan, Canada

Grayson County College Denison, TX

Thompson Rivers University Kamloops, BC Canada

Clackamas Community College Oregon City, OR

Lamar Institute of Technology Beaumont, TX

Mt. Hood Community College Gresham, OR

Midwestern State University Wichita Falls, TX

Portland State University Portland, OR

Sam Houston State University Huntsville, TX

RCC-SOU Higher Education Center Medford, OR

Southern Methodist University Dallas, TX

July/august 2013

43

calendar of events

20 Electro-Pneumatics Noblesville, IN SMC Technical Training Tel: 800-762-7621 www.smcusa.com/ training

22 Troubleshooting Pneumatics Noblesville, IN SMC Technical Training Tel: 800-762-7621 www.smcusa.com/ training

22 Webinar: “Compressor Lubrication and the NEED for Coalescing Filters” Presented by Clayton Fryer, CFPAI, Consultant 12:00 p.m. – 1:00 p.m. (eastern) Contact IFPS: 800-308-6005 www.ifps.og

26-29

5-6

8

13-16

19

Accredited Instructor Training Workshop Fairfield (Cincinnati), OH CFC-Solar, Inc. Contact IFPS: 800-308-6005 www.ifps.org

Connector and Conductor (CC) Job Performance Training Workshop Fairfield (Cincinnati), OH CFC-Solar, Inc. Contact IFPS: 800-308-6005 www.ifps.org

Industrial Hydraulic Mechanic (IHM) Review with Job Performance Test Fairfield (Cincinnati), OH CFC-Solar, Inc. Contact IFPS: 800-308-6005 www.ifps.org

Basic Pneumatics Noblesville, IN SMC Technical Training Tel: 800-762-7621 www.smcusa.com/ training

3-day IFPS Pneumatic Specialist Review with Test Cincinnati, OH CFC-Solar, Inc. Tel: 513-874-3225 www.cfc-solar.com

19-23

26-30

3-day or 5-day Level 2 Mobile Hydraulics – Advanced Maintenance and Repair Cincinnati, OH CFC-Solar, Inc. Tel: 513-874-3225 www.cfc-solar.com

Electronic Controls for Hydraulic Systems Bethlehem, PA Bosch Rexroth Tel: 610-694-8407 www.boschrexroth-us.com

5-9 Industrial Basics Maumee, OH Eaton Hydraulics Training Services Tel: 800-413-8809 www.eaton.com

7 Job Performance Training Workshop Fairfield (Cincinnati), OH CFC-Solar, Inc. Contact IFPS: 800-308-6005 www.ifps.org

44

12-23

16-18

Industrial Hydraulics Maumee, OH Eaton Hydraulics Training Services Tel: 800-413-8809 www.eaton.com

Connector and Conductor (CC) Review with Job Performance Test Rockledge, FL PIRTEK USA Contact IFPS: 800-308-6005 www.ifps.org

12-16 Principles of Hydraulics Bethlehem, PA Bosch Rexroth Tel: 610-694-8407 www.boschrexroth-us.com

www.fluidpowerjournal.com | www.ifps.com

19-23 Principles of Hydraulics Bethlehem, PA Bosch Rexroth Tel: 610-694-8407 www.boschrexroth-us.com

27-29 Cartridge Valves Maumee, OH Eaton Hydraulics Training Services Tel: 800-413-8809 www.eaton.com

ANSWER KEY Fluid Power Terms

Answer Key

see puzzle on page 10

Advertiser index Company Page Circle Advanced Machine & Engineering Co.... 17........441 ALA Industries Ltd................................ 20........445 Alloys and Components....................... 39........457 Ametek Automation and Process Technologies... ............................................................... 28........450 Clippard Instrument Lab Inc.............. CIV........458 Clippard Instrument Lab Inc................ 22........488 Continental Hydraulics........................CIII........460 Delta ^Q Ltd.......................................... 25........446 Delta ^Q Ltd.......................................... 34........472 Dynamic Fluid Components................ 20........444 Exsenco LLC.......................................... 29........452 Exsenco LLC.......................................... 32........461 Flange Lock............................................ 39........456 Flange Lock............................................ 34........471 Flaretite Inc............................................ 19........443 Flaretite Inc............................................ 32........465 Flow Ezy Filters Inc............................... 15........438 Fluid Power Inc..................................... 32........464 Fluid Power Systems Conference 2013................. ............................................................... 11........433 Fluid Press............................................. 32........463 Fluidyne Fluid Power...........................6-7........432 Fluidyne Fluid Power............................ 33........469 Fluidyne Fluid Power............................ 22........489 Gefran ISA Inc....................................... 33........467 Haskel International.............................. 22........490 Heinrichs USA LLC................................ 26........448 Hercules Sealing Products................... 22........491 Honor Pumps U.S.A............................. 29........451 Honor Pumps U.S.A............................. 35........476 Hydac International.............................. 27........449 Hydac International.............................. 22........492 Hydraulex Global.................................. 13........436 Hydraulics International Inc................. 25........447 Hydraulics International Inc................. 23........493 IFPE 2014................................................. 3........430 Inserta Products.................................... 36........485 La-Man Corp.......................................... 23........494

TRIANGLE INDUSTRIAL

Company Page Circle Lehigh Fluid Power Inc......................... 16........440 Lodar...................................................... 17........442 Lodar...................................................... 35........477 Main Manufacturing Products............. 31........453 Main Manufacturing Products............. 36........481 Main Manufacturing Products............. 23........495 Metaris Corp.......................................... 32........462 Ogura Industrial Corp........................... 34........474 Ogura Industrial Corp........................... 34........475 Oil-Rite Corp.......................................... 35........478 Oil-Rite Corp.......................................... 36........483 Oil-Rite Corp.......................................... 23........496 Peninsular Cylinder Co. Inc.................. 37........455 Peninsular Cylinder Co. Inc.................. 34........473 Power Valve U.S.A................................ 19........434 Power Valve U.S.A................................ 35........479 PVS Sensors Inc.................................... 33........468 Scenery Hydraulic Inc........................... 31........454 Scenery Hydraulic Inc........................... 35........480 Schroeder Industries LLC..................... 23........497 Sunfab................................................... 12........435 Super Swivels....................................... 23........498 Thermal Transfer Products................... 36........482 TR Engineering Inc.............................. 15........437 Ultra Clean............................................. 33........466 Ultra Clean............................................. 24........499 VEST Inc................................................. 5........431 VEST Inc............................................... 36........484 World Wide Metric Inc.......................... 37........486 World Wide Metric Inc.......................... 24........500 Yates Industries Inc................................. 1........429 Yates Industries Inc............................... 33........470 Yates Industries Inc............................... 24........501 Youli Hydraulic Industrial Co. LTD....... 16........439 Youli Hydraulic Industrial Co. LTD....... 37........487 Young Powertech, Inc...........................CII........459 Young Powertech, Inc........................... 24........502 Zinga Industries.................................... 24........503 Ad • Literature Review • Product Spotlight

Classifieds

CORPORATION 2560 Coyote Dr., Dr., Suite Suite 108 Tucson, AZ 85745 2560 N.N.Coyote 108q Tucson, AZ 85745 (520)792-4973 q (520)792-9217 FAX (520)792-4973  (520)792-9217 FAX

COME JOIN THE LEADING FLUID POWER DISTRIBUTOR IN THE SOUTHEAST! HSC is a premier company specializing in hydraulics distribution throughout the Southeast United States and Latin America. Serving our customers for 65 years, HSC has been and continues be an innovator in the industry and is looking for a motivated, energetic, and customer oriented Outside Sales Rep for our Savannah, GA territory.

The ideal candidate will possess extensive selling experience in fluid power systems and components.

Candidate must have proven territory knowledge. 3-5 years selling experience preferably in industrial or commercial products; BA/BS in Industrial, Electrical, or Mechanical Engineering or related field.

We We Specialize Specializein inLong Long Cylinders Cylinders

HYDRAULIC FLANGES and COMPONENTS

Hard Chrome Plating to 48 Feet Hard Chrome Plating 48 Cylinder Fabrication & to Repair Full HydraulicFeet Shop Capabilities

THE “SPECIAL” YOU WANT IS PROBABLY ON OUR SHELVES

Cylinder Fabrication & www.triangleindustrial.com Repair Full Hydraulic Shop Regional Sales Manager Capabilities

MAIN Mfg. Products, Inc. 800.521.7918 fax 810.953.1385 www.MAINMFG.com/fpj

www.triangleindustrial.com Zinga Industries is seeking an experienced mobile hydraulic outside Regional Sales Manager for Wisconsin, Illinois, Missouri, and upper Michigan. The candidate will be responsible for MOBILE OEM and Distribution accounts in the territory. 70% travel required. Expenses, car allowance, and available health insurance. The position is salaried plus bonus. Resumes from experienced candidates can be emailed to JBurke@Zinga.Com.

Send resumes to resume@hydraulic-supply.com.

July/august 2013

45

Classifieds

Fluid Power Executive Recruiters As veteran recruiters who focus in the Fluid Power Industry, we need outstanding professionals to fill opportunities in: -Engineering -Design -Manufacturing -Sales -Marketing

COME JOIN THE LEADING FLUID POWER DISTRIBUTOR IN THE SOUTHEAST! HSC has a proven 65 year track record at the forefront of the hydraulics & pneumatics distribution business. In order to expand our service footprint in the industry we are expanding our Pneumatic Division. We are seeking an energetic, motivated individual who is customer service oriented for our Outside Sales Rep position in the Atlanta, GA territory.

The ideal candidate will possess extensive selling experience in fluid power systems and components.

Candidate must have proven territory knowledge. 3-5 years selling experience preferably in industrial or commercial products; BA/BS in Industrial, Electrical, or Mechanical Engineering or related field.

Contact: Eric C. Bergsman, Sales/Marketing Dave Sevel, Engineering William Radke, Manufacturing/Operations Marvel Consultants, Inc. 28601 Chagrin Blvd., #210, Cleveland, Ohio 44122 www.marvelconsultants.com recruiters@marvelconsultants.com Tel: 216-292-2855, Fax: 216-292-7207

Serious About Surplus!

Seriously! We’ll Make You The Best Offer on:

• Hydraulic cylinders, valves, motors & more • PTO shafts, universal joints & gear boxes • Bearings of all kinds, roller chain, sprockets, tires, wheel assemblies, seats, engines, most anything related to lawn & garden and off road Larry Leggett 1-800-800-1810 Ext.3202 Fax: 1-800-800-1811 email: LLeggett@baileynet.com

Bailey Surplus Serious About Surplus

www.baileynet.com

Send resumes to resume@hydraulic-supply.com.

WANTED New · Used · Obsolete Large or Small Inventories

Pumps · Motors · Valves · Servos · Parts Vickers • Eaton • Denison • Rexroth • Bosch Moog • Pegasus • Atchley • Kawasaki • Staffa Racine • Double A • Oilgear • Parker • Dynex Char-Lynn • & many others!

Call or Fax with a list of your Surplus...

State the condition of the components & we’ll provide you with a price offer!

A Hydraulex Global Company

1-800-422-4279 | 586-949-4240 Fax: 586-949-5302 www.ahx1.com

sales@ahx1.com

Career OppOrtunity 37

“After 25 years in the fluid power industry, I chose PIRTEK because I recognized it as a franchise system built upon a strong foundation with a vision for growth.”

-Steve Goulette, Owner PIRTEK Philips Highway, Jacksonville, FL

1-888-774-7835

1 in the USA Exclusive Territories Available #

www.ownapirtek.com

46

www.fluidpowerjournal.com | www.ifps.com

TECHNICAL SALES POSITION Work with a long standing manufacturer of hydraulic pumps and motors in an organization that allows you the freedom to develop and grow a new customer base. This position will require travel throughout North America.

Previous experience and mechanical aptitude required.

Fluid Power technical degree and IFPS certification are a plus. If you have excellent people skills and are customer service oriented this could be the position for you. This position provides a competitive salary and benefit package based on previous experience.

If interested in this position, please e-mail cover letter, resume, and salary requirements to

sales@rotarypower.com.

A full-time Technical Editor/ Certification Project Manager is needed to coordinate all technical aspects of our certification program out of our Cherry Hills, N.J. headquarters office. Some travel is required for this position. See page 15 for full description and requirements.

Send resume to dpollander@ifps.org NO PHONE CALLS PLEASE.

Please circle numbers for additional information from our advertisers.

c/o iPacesetters P.O. Box 413050 Naples, FL 34101-6795 Fax: 888-847-6035

100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128

Reader Service Form

Fax or mail completed form for complimentary information TYPE OR PRINT ONLY:

Name Title Company Company Address City

State

Phone

Fax

Zip Code

Web Address E-Mail Address

129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157

158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186

187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215

216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244

245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273

274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302

303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331

332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360

361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389

390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418

419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447

448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476

477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505

1. Do you specify, select, or influence the purchase of components & systems on new or existing machinery?

03  Yes 04  No If yes, in which technologies? (check all that apply) 05  Hydraulic 06  Pneumatic 07  Vacuum 08  Electronic Controls 09  None of these 2. What is your primary job title? (check all that apply) 10  Administration 11  Plant Operations 12  Engineering 13  Technical 14  Mechanical 15  Purchasing 16  Other

A  1-19

B  20-49

C  50-99

D  100-249

J  Snow Vehicles, Ski Lifts K  Steel Plants & Rolling Mills L  Truck & Bus Industry M  Textile Machinery N  Woodworking Machines O  Other (specify) P  Fluid Power Industry

E  250-499

F  500-999

5. What is the primary business activity at this location?

In the Fluid Power Industry: 56  Manufacturer 57  Distributor 58  Education Outside the Fluid Power Industry: 59  Original Equipment Manufacturer (OEM) 60  End User of Fluid Power Products 6. In which region does your company do business? (check all that apply) 61  East 62  Midwest 63  Southeast 64  Southwest

65  West

66  National

67  International

7. My Company should be advertising in or submit an article to the Fluid Power Journal. Please contact this person: Name: ___________________________________ Title: _________________________________ Phone: ______________________________ 8. I wish to receive a free subscription to Fluid Power Journal:

01  Yes

02  No

______________________________________________________________________________________________________________________ Signature Date 9. I would like more information on the following products: (Please check all that apply) 800  Accumulators 805  Filters 808  Hose & Tubing 801  Accessories 806  Gauges & Sensors 809  Hydraulic Fluids 802  Electronic Controls 807  Heat Exchangers, 810  Motors 803  Couplings & Fittings

Heaters, Aftercoolers, 811  Pumps 804  Cylinders Dryers 812  Seals & Packing 10. I plan on purchasing the above products in the next: 68  0-3 months 69  3-6 months 70  6-9 months

71  12+ months

Please send Fluid Power Society Information (please check all that apply) 897  Membership 898  Certification 899  Training/Education

813  Vacuum 814  Valves 815  Software

G  1000+

www.fluidpowerjournal.com

4. Number of employees at this location?

B  Material Handling Equipment C  Mining Machinery D  Packaging Machinery E  Plastic Machinery F  Presses & Foundry G  Railroad Machinery H  Road Construction/Maintenance Equipment I  Simulators & Test Equipment

Request FREE product information online at

3. Which of the following best describes your market focus?

A  Aerospace I  Forestry B  Agricultural Machinery J  Furnaces C  Automotive K  Gas & Oilfield Machinery D  Civil Engineering L  Heavy Construction & Equipment E  Cranes M  Military Vehicles F  Drills & Drilling Equipment N  Construction & Utility Equipment G  Flame Cutting/Welding O  Machine Tools Equipment P  Government Related H  Food Machinery A  Marine & Offshore Equipment

July/August 2013 Expiration Date: October 31, 2013

Subscription Form To start your complimentary subscription, return this card!

You can also subscribe online at www.fluidpowerjournal.com Fill out this card completely, detach, then mail or fax it to start your subscription!

01

PO Box 2548 • ORLANDO, FL 32802-9830 Fax: 1-866-207-1450

 YES! Please start/continue my complimentary subscription to the Fluid Power Journal

02

 No. Not interested.

Signature (REQUIRED)

Title (REQUIRED)

Date (REQUIRED)

Telephone

Fax

E-mail

/

/

Please Type or Print Clearly:

First Name

Middle Initial

Last Name

Company

Division

Web Address

Address

Mail Stop

City

State

Zip Code

 Check here if you would like to keep your name, address, phone and fax numbers confidential, and not released to third parties The address above is my:  Home Address  Business Address

Which edition would you like to receive?  Print  Digital  Both 1. Do you specify, select or influence the purchase of components & systems, on new or existing machinery? 03  Yes 04  No. If yes, which technologies? (check all that apply) 05  Hydraulic 06  Pneumatic 09  None of These 07  Vacuum 08  Electronic Controls 2. What is your primary job title? (check only one) 10  Administration: Chairman, Pres., V.P., Sec., Tres., G.M., Owner,

Bus. Mgr., Dir., etc.

11  Plant Operations: VP of Mfg/ Oper/ Prod., Plant Mgr./ Dir. Mgr.,

Supv./ Supt./ Foreman/ Safety Dir., etc.

12  Engineering: V.P. Eng., Eng., Des. Eng., Dir. of Eng., Staff Spec.,

Chief Eng., Senior Eng., Maint/Prod. Eng., etc.

13  Technical: Chief Tech., Fluid Power Tech., etc.

14  Mechanical: Chief Master Mech., Master Mech., Fluid Power

Mech., etc.

15  Purchasing: VP/Dir. of Purch., Procurement Mgr., Buyer,

Purch., etc.

16  Other: (please specify)______________________________________ 3. Number of employees at this location?

A  1-19 B  20-49 C  50-99 E  250-499 F  500-999 G  1000+

D  100-249

(View a sample of our paperless digital edition at www.fluidpowerjournal.com) 4. What is the primary business activity at this location?

In the Fluid Power Industry Outside the Fluid Power Industry 56  Manufacturer 57  Distributor 58  Education 59  Original Equipment Manufacturer (OEM) 60  End User of Fluid Power Products 61  Other: (please specify)______________________________________ 5. Which of the following best describes your market focus?

A  Aerospace A  Marine & Offshore Equipment B  Agricultural Machinery B  Material Handling Equipment C  Automotive C  Mining Machinery D  Civil Engineering D  Packaging Machinery E  Cranes E  Plastic Machinery F  Drills & Drilling Equip.

F  Presses & Foundry G  Flame Cutting/Welding Equip. G  Railroad Machinery H  Food Machinery H  Road Construct/Maint. Equip.

I  Forestry I  Simulators & Test Equipment J  Furnaces J  Snow Vehicles, Ski Lifts K  Gas & Oilfield Machinery K  Steel Plants & Rolling Mills L  Heavy Construction & Equip. L  Truck & Bus Industry M  Military Vehicles M  Textile Machinery N  Construction & Utility Equip. N  Woodworking Machines O  Machine Tools O  Other (specify)_____________ P  Government Related P  Fluid Power Industry

My company should be advertising in or submit an article to the Fluid Power Journal. Please contact this person: Name:_____________________________ Title:___________________________ Phone:____________________________

Scan Here

heft. breadth. depth.

A comprehensive range of hydraulic products for pinpoint control.

Whether you need a complete power unit system, replacement valves or a combination of components for a unique application, Continental Hydraulics is your hydraulics solutions heavyweight. Our extensive line of interchangeable hydraulics allows you to configure the right solution for maximum control and durable performance.

The solutions you need, where you need them: • Pinpoint control - offering over 1,000 ways to control flow and pressure • Seven valve sizes - ranging from D03 to D10 • Pumping options - featuring PVR, PVX and Piston pumps • Digital closed-loop technology - for faster, more accurate performance • US and Global delivery - nationwide shipping and availability in 69 countries For heavyweight hydraulics that cover the gamut and go the distance, put Continental Hydraulics in your corner.

952. 895. 6400 | www.continentalhydraulics.com Circle 460

Providing custom products and value-added assemblies based on the most successful miniature pneumatic line in the world!

Wire leads to be 7” + 1/8” with crimped terminal 10258333-2

“Cleaned for Oxygen Service” internal components Stainless Steel coil housing

5-volt coil less than 0.5 watt

Brass base (no plating needed)

FKM seals

Mounting holes

1/2” max

Toggle-operated manual by-pass valve in base

Integrated needle valve for precise flow control

CUSTOM er

s n o i t u l o s Circle 458

Clippard Instrument Laboratory, Inc. Cincinnati, OH

1-877-245-6247 www.clippard.com/customsolutions