The Excelsior Rugby Club is a sports club based in Oamaru who is working on getting new lights fitted at their club facilities. The new lights will allow for the club to host more activities and community projects. The club is especially excited about their new women-only rugby team that will be playing on Friday nights.
$2,000 Donation
BLUE HOPE FOUNDATION
Police work carries unique exposure to cumulative trauma. When PTSD and other mental injuries are minimised, disputed, or handled through fragmented processes, the impacts can include heightened suicide risk, workforce exit, family strain, and long-term disability.
The Blue Hope Foundation aligns their approach with the UN Convention on the Rights of Persons with Disabilities (CRPD), providing care coordination for physically and mentally injured New Zealand police workers and their families as well as developing and delivering projects that support them. The Hope Ride is one of those projects: a charity cycle ride from Wellington to Cape Reinga, running from March till April. This community engagement project aims to connect with police workers and their families across New Zealand to raise awareness of trauma, psychological injury, and suicide risk.
The Blue Hope Foundation reached out to the Ideal Foundation for help funding follow-up communication and digital engagement so that support continues beyond the event itself. Supporting police families strengthens the wellbeing of the police service, contributes to safer communities, and supports longterm economic and social stability. A well-supported police service benefits everyone.
$500 Donation
POUND HOUNDS RESCUE
Pound Hounds Rescue is a 100% volunteer run, non profit organisation dedicated to providing essential care, shelter, rehabilitation, and rehoming services homes for stray and abandoned Pound dogs and puppies. All dogs rescued by Pound Hounds Rescue are desexed, vaccinated, microchipped, registered with Waipa District Council, health checked and flea and worm treated, then placed into temporary foster care until permanent loving and responsible homes can be found. A contribution of $500 was made by the Ideal Foundation to support Pound Hounds Rescue in their ongoing efforts to improve animal welfare and ensure resources are available for animals in need.
$500 Donation
PAWPHANAGE
The Pawphanage is a small cat-only animal shelter based in Glenview, Hamilton, that operates on a capacity for care model. They don’t do the bare minimum for their residents and will only take in animals that they have the resources to care for really well during their stay. Every cat adopted frees up space for another cat or kitten in need, and their adoption fee helps pay the bills.
The Ideal Foundation has made a $500 donation to hep the charity provide essential care, shelter, rehabilitation, and rehoming services for vulnerable animals in our community.
$2,000 Donation
RANGITAIKI GIRLS RUGBY
Rangitaki Girls Rugby is the first all girls teams to play in the EBOP JAB. What began with 21 girls has rapidly grown to 51 eager young females aged 9-13 years of age, wanting the opportunity to play rugby in a positive and supportive environment. As a newly established club, their biggest challenges is the lack of funding needed to meet the demands of their rapid growth.
While their player numbers continue to increase, their financial resources have not kept pace, making it difficult to provide the essential uniforms their girls need to represent the club with pride.
Rangitaki Girls Rugby is proud to be helping shape the future of female rugby in their community and providing a space where girls feel they belong, are encouraged, and can strive toward future sporting goals. The club has created opportunities for young girls to develop not only rugby skills, but also confidence, discipline, teamwork, and leadership qualities that will benefit them both on and off the field.
With the season currently underway, Rangitaiki Girls Rugby is needing financial assistance to get new playing strips for their players and getting their club properly equipped for upcoming games and commitments. The Ideal Foundation has made a donation of $2,000 to help Rangitaki Girls Rugby in their endeavours.
$2,000 Donation
OLYMPUS FITNESS AND PERFORMANCE
Olympus Fitness and Performance in New Plymouth is a community-driven gym where members get 24/7 access to an environment tailored for individuals committed to achieving their health and fitness goals. The gym also provides personalized training programs and expert coaching, especially in boxing and functional fitness.
Boxing has been truly life-changing for many of their boxers, giving them purpose, confidence, and a positive path forward. Their athletes train incredibly hard, and many of them come from challenging backgrounds. 3 out of their 4 fighters won their matches, which is a true reflection of their dedication and commitment. Through boxing, they have developed resilience, discipline, and the mindset to keep showing up for themselves no matter what life throws at them.
Olympus is going through renewing their current gear and reached out to the Ideal Foundation for help replacing essential equipment to ensure their athletes have a safe and well-equipped place to train. Olympus assured the Ideal Foundation that this contribution would make a meaningful difference not only to their gym, but to the lives of the young people and athletes who rely on it.
$1,500 Donation
SPECIAL OLYMPICS TE WHANGANUI-A-TARA (SOTWT)
Basketball is one of the most popular sports withing the Special Olympics Te Whanganui-a-Tara (SOTWT). In 2025, their basketball athletes participated in several regional tournaments and the Special Olympics National Summer Games. They will compete in several tournaments again in 2026. The club is run entirely by volunteers and is dependent upon community support and reached out to the Ideal Foundation for requesting financial support for sporting equipment (stepping ladder, blocking guards, training mat, rebound net, bibs), venue hire, and costs towards running and attending tournaments. Many of their athletes face financial challenges due to their intellectual disabilities. Reducing financial barriers is essential in ensuring that all athletes are able to perform well.
$2,000
ADDINGTON COMMUNITY GARDEN
Te Waerenga Whakatō Puāwai (formerly Addington Farm) is a community-focused māra kai (food garden) based in Ōtautahi. Started in 2017 by a group of friends who wanted to grow good things in their neighbourhood, we’ve been helping people grow kai and community ever since.
Te Waerenga is seeking financial support to fund electrical components required to install power to a storage shed and seedling tunnel house at their new community garden site in Addington Park. .
This infrastructure is essential to safely run core garden operations, including seedling propagation, tool storage, and future educational activities. Power will enable lighting, irrigation control, and basic equipment use, significantly improving the functionality and safety of the space. The garden is expected to engage 120–200 people weekly, including volunteers, local schools, and families.
Without this support, the shed and tunnel house would remain limited in use, restricting their ability to deliver key programmes and expand community impact. The Ideal Foundation is excited to support Te Waeranga so they can keep making a positive impact in their local community.
Ideal Foundation is proud to be a Silver Sponsor of Sustainable Coastlines, supporting their vital mission to protect marine environments, reduce plastic pollution, and empower communities to preserve the beauty of Aotearoa’s coastlines and wildlife for animals in need.
$15,000
IDEAL FOUNDATION DONATES
$15,000
TO I AM HOPE
I Am Hope aims to promote positive attitudinal societal change around mental health throughout New Zealand, offering hope and a voice to young people. Thanks to you and our key suppliers, we were able to contribute $15,000 more this year, totaling in $165,000 donated since 2020. Every purchase of Ideal Foundation products enables us to continue this support.
TRADESAVE SLEEK RANGE SELECTED SMARTVENT POSITIVE ADVANCE, CUBIC 500 WALL LIGHTS, VENT-AXIA CONTINUOUS EXTRACT FAN, AIRBUS DC CONTINUOUS SELECT BATHROOM FAN
AND MOD6+ RANGE
HENRY
THE KING DOWNLIGHTS & SECURITY
KING DOWNLIGHT
Selectable colour 3000K/4000K/6500K, Dimmable, IP44 and IC-F rated, easy to install with large terminal block, 3 year warranty.
PHIDN021BD90G2
• Ø90mm cut-out
• Ø113mm ceiling plate
• 7W 800 lumens
PHIDN021BD120G2
• Ø110mm cut-out
• Ø145mm ceiling plate
KING SECURITY LIGHT
PHIKS24WCSBK
Selectable colour 3000K/4000K/5700K, removeable and replaceable sensor, IP54 rated, aluminium adjustable twin heads, UV protected polycarbonate housing, 2 year warranty.
• 9W 1000 lumens BUY KING DOWNLIGHT AND SECURITY LIGHT TO SUPPORT THE IDEAL FOUNDATION AND MIKE KING’S I AM HOPE FOUNDATION
PRE-INSULATED
DISCOUNT IS VALID DURING PROMOTION PERIOD ONLY AND SELECTED PRODUCT RANGES ONLY.
DISCOUNT IS VALID DURING PROMOTION PERIOD ONLY AND SELECTED PRODUCT RANGES ONLY.
17 AUGUST - 9 OCTOBER
HOLE SAWS
DISCOUNT IS VALID DURING PROMOTION PERIOD ONLY AND SELECTED PRODUCT RANGES ONLY.
T&CS APPLY. DISCOUNT IS VALID DURING PROMOTION PERIOD ONLY AND SELECTED BIZLINE PRODUCT RANGES ONLY. PRICING EXCLUDES GST. LIMITED TO LOCAL BRANCH STOCK ONLY. NO BACK ORDERS. FREIGHT MIGHT APPLY.
PRE INSULATED TERMINALS SCREW FASTENERS
CABLE CLIPS & TAPE HEATSHRINK
CHECK OUT SELECTION
HDMI EXTENDER OVER CAT6/6A CABLE
Complete AX3000
DIGITAL SOLUTIONS
DESIGN AND ENGINEERING CAPABILITIES TO SUIT EVERY POSSIBLE APPLICATION
HIDDEN MEDIA HUB
MTM04HMH01
• New Zealand Design Registration Number: 418283 and 418555
• Internal dimensions 285x250x70mm – can hold up to 5 New Zealand standard faceplates
• Able to hold electronics like HDMI® converters, modulators, and network gear like access points and switches
• Designed for new and existing constructions
• Suitable for residential and commercial buildings
• Paintable and easily hides cables in the wall cavity
• Cutout size: 285x250mm (Use the hubs inner wall unit as a template)
RECESSED WALL POINT WITH BUILT IN CABLE MANAGEMENT SYSTEM
MTM04RP02 (WHITE)
MTM04RP03 (BLACK)
• Suitable for residential and commercial buildings with paintable faceplate
• Compatible with all major wall outlet brands, the single-gang outlet is designed for Matchmaster’s TV, Audio, USB and HDMI® mechs plus Clipsal® 2000 series mechs.
• Designed for 70mm and 90mm wall cavities
• Quick and easy installation template included
• Simple twist clamp design for easy installation
• High quality heat resistant plastic
• Cutout size: 168x120mm (Use the manual inside the box as a template)
• Power point, HDMI lead, flylead, RJ45 mech, data cables not included.
50M HDMI™ EARC AUDIO EXTENDER
MTM34EARC50
• Extend HDMI™ eARC/ARC audio signal up to a distance of 50m/164ft
• Support CEC pass-through for source control and auto on/off
• Support bi-direction IR pass-through
RECESSED WALL BOX WITH BUILTIN CABLE MANAGEMENT SYSTEM
MTM04RP04
• Suitable for residential and commercial buildings with paintable faceplate
• Compatible with all major wall outlet brands supporting up to two wall plates, plus includes two brush plates and one mech insert to allow for cable pass through and fit off.
• Single gang outlet designed for Matchmaster’s TV, Audio, USB and HDMI mechs plus Clipsal® 2000 series mechs.
• Designed for 70mm and 90mm wall cavities
• Quick and easy installation template included for wall cut-out (229mm x 174mm)
• A simple twist clamp design for easy installation
• High-quality heat resistant plastic
MTM04RP03 (BLACK)
RECESSED WALL POINT
MTM04RP01
• Suitable for residential and commercial buildings with paintable faceplate
• Compatible with all major wall outlet brands
• Designed for 70mm and 90mm wall cavities
• Quick and easy installation template included
• Simple twist clamp design for easy installation
• High quality heat resistant plastic
• Cutout size: 168x120mm (Use the manual inside the box as a template)
• Power point not included
SLIMLINE OUTLET PLATE WITH BRUSH COVER AND FLOATING WALL CLIPS
MTM05WP70
• Easy installation by pre-installed floating clips, no need for additional wall mounting accessories
• Perfect for use behind wall-mounted TVs, entertainment cabinets and desks where space is limited for cables and fittings, it takes the strain away from terminations
• Can be used with TV flyleads, data, HDMI®, speaker and other audio video cables
• Suitable for both residential and commercial use
• Designed for 70mm and 90mm wall cavities with cut-out template and instructions supplied
• High quality heat resistant polycarbonate plastic
• Suitable for plasterboard
OUTLET PLATE WITH BRUSH COVER
MTM05WP64
• This narrow opening cable management wall plate keeps cables tidy and secure
• Suitable for computer networks, home theatre systems, or any application which involves in-wall cabling
• Has a narrow opening that accommodates additional direct connection of pre-terminated cables
• Allows cables to enter the wall cavity space without the need for interconnect fittings
• Ideal for pre-made leads directly out of the wall cavity Brush keeps dust away
LARGE BULLNOSE OUTLET PLATE
MTM05WP61
• Bull nose cable management solution for computer networks, home theatre systems
• Cabling remains neat, tidy and secure via the cable management push through system
• Large opening which can accommodate a large run of cables at once
• Easy to run cables through the wall
• Also available in black (05MMWP61B)
• Detachable nose for flush installations
UNIVERSAL 4 WAY CONDUIT JUNCTION BOX - 25MM WITH 20MM REDUCERS
• Multiform conduit junction box, 1 to 4 ports supporting 20mm, 25mm and 32mm* conduit entries
• Provides simple and secure cable management and protection for both electrical and communications installations
• Designed for both residential and commercial applications with an IP54 rating
• Made from durable UV stabilised PVC plastics for long life and cable protection
• Compact and shallow design for a neat and tidy install
• Perfect one-stop product to keep in your work vehicle
• * 32mm entry portals sold separately (58MM-CP32)
The MTM58MMCB01 is a versatile 4-way conduit junction box that features slide-out conduit portals, allowing you to quickly change between 20mm, 25mm and 32mm* entries. With entries on 4 sides and blanking plates supplied, the CB01 can be used in many orientations, right or left junction, straight through service port or up to a 4 way crossroad junction with differing conduit sizes.
32MM CONDUIT PORTAL FOR CB01 JUNCTION BOX (4 PACK)
MTM58MMCP32
• 4 pack of 32mm conduit portals for use with the 58MM-CB01 conduit junction box
• Allows the CB01 to connect to 20mm, 25mm and 32mm conduits in one install
• Designed for both residential and commercial applications
• Made from durable PVC plastics for long life and cable protection
• A simple change out for existing ports to upgrade connections
SECURITY OFFERS
SECURITY & CONTROL FROM ALMOST ANYWHERE
THE ERSKINE LUXE NARROW ENTRANCE LOCK
ARHLHLPSLBERSK
Slimline & Sleek Design
Built-In Wi-Fi - Connects directly for remote access and control via TTLock App
Multiple Unlocking Methods - App, Fingerprint, PIN code, RFID Card, or manual key
Secure Emergency Access - Includes a manual track-style key override
• LED Technology: This powerful 325-lumen handsfree head torch features durable and energy efficient LED technology
• Advanced Dimming Technology: Adjust the intensity from 10% to 100% on all modes
• Red Light Night Mode: The red-light mode enhances your night vision for activities such as camping, fishing, and after-dark hiking
• Versatile Hands-Free Light: This easy-to-use, compact head torch features an adjustable head strap and anti-glare pivoting head, keeping you covered for power cuts, DIY and more
ENERGIZER
HEADLIGHTS H-L
TIER2 HDL40 500L Y24A32
ENEHDL40
• LED Technology: This powerful 500-lumen handsfree head torch features durable and energy efficient LED technology
• Advanced Dimming Technology: Control light intensity from 10% to 100% in all modes
• Durable Construction: Ideal for long-lasting use, this compact and lightweight hands-free torch is waterproof and features a shatterproof lens
• Versatile Hands-Free Light: This easy-to-use, compact waterproof head torch features an adjustable head strap, keeping you covered for power cuts, DIY and more
EliteAlarms Caliper
CHANGE YOUR BATTERY! DON'T
GET CAUGHT OUT!
Century PS 5-year VRLA batteries are a range of high performance, multi-purpose batteries which provide dependable primary and back-up power in domestic and commercial applications. Manufactured to the latest International standards, using premium grade raw materials and superior manufacturing processes, Century PS batteries provide reliable, trouble-free power in high-service-life applications.
Primary Power
Century PS Batteries are ideal for use in applications requiring constant power over extended periods of time. They are the ideal primary power source for a range of applications including:
• Toys
• Power Tools
• Televisions & Video Recorders
• Marine Equipment
• Electronic test equipment
• Portable lighting
Back-up Power
In back-up power applications, Century PS batteries provide dependable reserve power to operate critical systems in the event of mains power failure. In these situations Century PS batteries remain on charge until mains power outage, at which point they engage to provide power to critical systems.
Typical back-up power applications include:
• Alarm Systems
• Communications equipment
• Computer servers
• Emergency lighting systems
• Vending machines
• Automated doors & security gates
• Fire & security systems
CENPS1270
• 151mm x 65mm x 99mm
• Vale Regulated Lead Acid
• Absorbed Glass Mat
• 12 Month Warranty
VRLA BATTERY PS1270 (12V, 7.0AH), SEALED LEAD ACID
DISCOVER THE RX LIGHTING COLLECTION!
RX Lighting is an exclusive range of lighting products for Ideal Electrical Suppliers. Whether you’re looking for stylish fixtures for your home or reliable lighting solutions for your business, RX Lighting is your local partner in illumination. With a commitment to quality and exceptional value, our latest collection offers innovative designs that enhance any space. Illuminate your world with RX Lighting today!
DOWNLIGHT
These downlights are packed with everything you want, high lumen output, dimmable, quality assurance and suitable for both residential and commercial installations. IC-F Rated. Pre-selectable colour temperature - 3000k, 4000k & 5700K. Available in a range of cutout sizes to suit every requirement.
REXDL72CCTWH
• Downlight LED 7 Watt 3CCT 3000K/4000K/ 5700K Colour Selectable. 527 Lumen 72mm cut out White IP54
REXDL92CCTWH
Downlight LED 10 Watt 3CCT 3000K/4000K/ 5700K Colour
Selectable. 920Lumen 92mm cut out White IP54 Changing Change
REXDL92TLTCCT
Downlight LED Tilt 10 Watt 3CCT 3000K/4000K/ 5700K Colour
Selectable. 840 Lumen 90mm cut out White IP20
REXDL100CCTWH
Downlight LED 13 Watt 3CCT 3000K/4000K/ 5700K Colour
Selectable. 1090 Lumen 100mm cut out White IP54
REXDL120CCTWH
Downlight LED 15 Watt 3CCT 3000K/4000K/ 5700K Colour
Selectable. 1480 Lumen 120mm cut out White IP54
ASYMMETRIC BEAM ANGLE SUITABLE FOR COASTAL ENVIRONMENTS
Due to the asymmetric light distribution of the Cosmos luminaire, the optimum mounting is with the luminaire in the horizontal plane resulting in a more efficient and cost effective lighting installation. It also eliminates any issues with glare, upward spill light and Dark Sky requirements. Special double surface coating gives excellent life time in a marine environment. Mounting Stirrup is stainless steel.
REXFL23050V2
• 50 watt 6635 lumen 4000k IP66 IK08 Grey
Stainless Steel Bracket. 5 Year Warranty
REXFL23100V2
• 100 watt 14,425 Lumen 4k IP66 IK08 Grey
Stainless Steel Bracket. 5 Year Warranty
REXFL23150V2
• 150 watt 21,862 Lumen 4k IP66 IK08 Grey
Stainless Steel Bracket. 5 Year Warranty
REXFL23200V2
• 200 watt 29,083 Lumen 4k IP66 IK08 Grey
Stainless Steel Bracket. 5 Year Warranty
REXFL23300V2
• 300 watt 45,303 Lumen 4k IP66 IK08 Grey
Stainless Steel Bracket. 5 Year Warranty
REXHB06150W
• Kai High Bay 150Watt 4000K Non-Dim Food Grade Gloss White IP69K
Specifically designed for FoodProcessing Applications, IP69K, IP66. No exposed screws; no glass; smooth design. IP69K: protection against ingress of dust and high temperature, high pressure water 100bar (1450 psi), high temperature steam 80ºC (176°F) – making products with this certification ideal for use in conditions where equipment must be carefully sanitized.
RX Lighting Titania Under Verandah fitting is colour selectable 4000k and 6500k and rated IP65. Suitable for both ceiling and wall mounting.
REXTTA24WBI
24W 2640lm 2ft Bi Col 840 & 865 IP65
REXTTA48WBI
48W 5280lm 4ft Bi Col 840 & 865 IP65
REXTTA60WBI
• 60W 6600lm 5ft Bi Col 840 & 865 IP65
Backlit panel can be covered as it offers excellent thermal management with an IC-4 rating. Surface Mounting Kit available. Direct replacement for traditional Troffers. Dali dimming available on request.
REXBLP66CCT
• Backlit Troffer Panel LED 600mm x 600mm 36Watt 3000K/4000K/5700K. Non Dimming. Supplied with Flex & Plug. IP44 UGR19
REXBLP123CCT
• Backlit Troffer Panel LED 1200mm x 300mm 36Watt 3000K/4000K/5700K. Non Dimming. Supplied with Flex & Plug. IP44 UGR19
REXBLP126CCT
• Backlit Troffer Panel LED 1200mm x 600mm 60Watt 3000K/4000K/5700K. Non Dimming. Supplied with Flex & Plug. IP44 UGR19
REXHIS200WCCT
• Hisaver LED Highbay 120-200W adj power 3/4/5K IP65 70-115°
The new RX Hisaver is a multiwattage, lumen selectable and beam angle adjustable fitting. It is IP65 and comes complete with a 1.5m flex and plug. Beam angle adjusted via dip switch 70/85/115°. 3000/4000/5000K. Optional accessories include Casambi or Microwave Sensor.
Contemporary wide body surface mounted fitting, with dual colour selectable, 4000K or 6500K. Cable entry can be centred, offset or through the rear cap. 206mm width allows for good coverage for retrofit of existing fittings.
REXMTS24WBI
• Metis Wide Batten LED 24Watt 600mm 2 Foot Bi Colour 840/865
REXMTS40WBI
• Metis Wide Batten LED 40Watt 1200mm
REXMTS58WBI
• Metis Wide Batten LED
Slimpak Narrow Batten has selectable colour, 4000K or 6500K. It is rated IP40 and IK08.Suitable for residential, commercial, hospitality, hotels and schools.
REXSLMLED18W
• Slimpak Batten Narrow LED 18Watt 2400lm 2ft 600mm
Bi Colour 840 and 865
REXSLMLED38W
• Slimpak Batten Narrow LED 38Watt 5000lm 4ft 1200mm
Bi colour 840 and 865
REXSLMLED50W
• Slimpak Batten Narrow LED 50Watt 6500lm 5ft 1500mm
Bi Colour 840 and 865
LIGHT OFFERS
LED BATTENS
DEFENDER 3F LED 2X30W HARD SKIN 1570MM IP65 58730
FIL58616HS
• An industrial AS/NZS 2293 compliant underverandah offering exceptional performance, strength and resistance to volatile chemicals .
• Ceiling, Suspended and Wall Mountable. Self extinguishing V2 polycarbonate
ZERO 3F BATTEN LED
• The new Zero 3F was designed specifically to cope with visual tasks efficiently in taskareas, thanks to an increase in the surrounding and background areas.
• Light is distributed widely even on the walls to limit the “cave effect” and to enhance the furnishings and information present on vertical surfaces.
• The indirect light component reduces visual contrast and makes the product seem to be suspended even if it is installed on the ceiling.
ZERO 3F BATTEN LED 35W
940 4152LM LEN 1204MM IP40
FIL1860
ZERO 3F BATTEN LED 44W
940 LEN 1560MM IP40
FIL1861
WHAT MAKES THE 3F FILIPPI HARD SKIN PRODUCT STAND OUT?
Its durability and resistance to aggressive conditions:
• Chemical resistance: The housing and diffuser receive an additional protective treatment to withstand corrosive airborne chemicals, such as sulphur compounds, ammonia, detergents, and some acids, which can damage conventional plastic luminaires over time.
• Protected LEDs: It uses anti-sulphur LED modules with special protection (SiO₂ coating) to reduce degradation caused by chemically aggressive atmospheres, helping maintain light output and lifespan.
• Long service life: Rated for approximately 100,000 hours (L80/B10) under specified operating conditions, making it suitable where maintenance is difficult or expensive.
• Robust construction: Features an IK10 impact rating and IP66 ingress protection, meaning it's highly resistant to impacts, dust, and powerful water jets.
• Food industry suitability: It's designed for environments such as food processing plants and is suitable for applications requiring compliance with standards like HACCP, where robust, shatter-resistant lighting is important.
This makes the Hard Skin version particularly useful in places like:
• Food and beverage manufacturing
• Chemical processing plants
• Wastewater treatment facilities
• Parking garages
• Industrial facilities with corrosive vapours or cleaning chemicals
For a quality indoor lighting solution, try the 3F Filippi 03F. A great product that combines:
• Premium optical performance
• High colour rendering
• Energy efficiency
• Long service life …and is an easy retrofit design.
SMOKE ALARM OFFERS STAY SAFE
The Orca® Intelligent Wireless Interlink Technology allows multiple units to be wirelessly interlinked to protect the whole household. When one alarm activates, the entire network activates. These alarms are the future of smoke and fire detection. In larger residences, they provide peace of mind knowing that a small fire emerging away from where people are sleeping will still provide an immediate close proximity warning allowing action to be taken before the fire gets out of control.
ORCA SMOKE ALARM 3 BED HOME PACK 10YR WIRELESS OM866P8-10RF NWF141864
• Long-life built-in lithium batteries
• 10 year warranty
• Certified to EN14604:2005
• Meets NZ Government 2016 Rental Housing Legislation
• Alarms comply with NZS 4514:2021
This pack is suitable for a 3-bedroom house* and includes 6 wireless interlink smoke alarms, 1 wireless interlink heat alarm and a controller.
*Based on a typical 3-bedroom house. It is the installer’s responsibility to ensure that these alarms satisfy the number required by the building code."
Stylishly designed photo-cell controller.
The remarkably inconspicuous NightmatIQ photo-cell controller impresses with its slim-line, sleek design and automatically provides perfect illumination night after night. The photocell controller gets to work on reaching the twilight threshold selected and simultaneously switches on all of the lights connected to it (max. 1000 W/ LED: 250 W). This reliably illuminates building fronts, premises, gardens, shop windows and other areas as soon as it starts to get dark – without having to lift a single finger. When dawn breaks hours later, the lights switch off again all by themselves. Benefiting from NightmatIQ, existing lighting previously switched on and off by hand can be converted to automatic operation in no time at all. To suit any need, the twilight threshold can be set to an ambient light level of 1 to 75 lux via a potentiometer (controller). Whether rain, storm or snow – with an IP54 protection rating, NightmatIQ ensures reliable performance in all weathers. The photo-cell controller comes in
NIGHTMATIQ WHITE PHOTOELECTRIC LIGHTING CONTROLLER
STE066147
NIGHTMATIQ ANTH PHOTOELECTRIC LIGHTING CONTROLLER
STE066130
THUNDER WIPES
TRADE TUB 100 TUB
INFRARED MOTION DETECTOR IS1
1200° detection angle, up to 10m detection range, 1.8–3.0m mounting height, Wall or ceiling surface mounted, IP54 for indoor and outdoor, can be swivelled horizontally by 60° and vertically by 180°.
IS1 PIR SM 120° 10M IP54 WHITE STEL080035
IS1 PIR SM 120° 10M IP54 BLACK STEL080036
ORO IS 360-1 DE PIR REC 360° 4M IP54 WHITE
STE032845
• 360° detection angle, up to 8m detection range, 2.5–4.0m mounting height, Ceiling recessed, IP54 for indoor and outdoor.
IS 3360 PIR SQ REC 360° 20M IP20 COM1 INPUT WHITE
STE033460
• Professional Line, 360° detection angle, up to Ø20m detection range, 2.5–4.0m mounting height, Ceiling Concealed, IP20 for indoor high spaces and large areas.
ORO IS 360-1 DE PIR REC 360° 4M IP54 WHITE
STE010478
• Professional Line, 360° detection angle, up to Ø20m detection range, 2.5–4.0m mounting height, Surface mounted, IP20 for indoor high spaces and large areas.
FIRE ALARM CABLE RANGE
FIRE ALARM CABLE 2 CORE
0.75MM 200M BOX - GREY
MSRB2C075GY
• Tinned Copper
• 200M Reel-n-Box
• Metre Marked
• "BEP PVC"
FIRE ALARM CABLE 2 CORE
1.25MM 200M BOX - GREY
MSRB2C125GYBX
• Tinned Copper
• 200M Reel-n-Box
• Metre Marked
• "BEP PVC"
FIRE ALARM CABLE 2C 2.0MM
200M REEL - GREY
MSRB2C2GY
• Tinned Copper
• Strong Wooden Drums
• Metre Marked
• "BEP PVC"
FIRE ALARM CABLE 2 CORE
1.25MM 200M REEL - LSZH GREY
MSRB2C125GYLS
• Tinned Copper
• Low Smoke Zero Halogen
• Metre Marked
• Suitable for Green Building Installs
FIRE ALARM CABLE 2 CORE 0.75MM
200M REEL - SCREENED GREY
Screened against Interference
FIRE ALARM CABLE 2 CORE 1.25MM
200M REEL - SCREENED GREY
Screened against Interference
FIRE ALARM CABLE 2 CORE 0.75MM 200M BOX - RED
MSRB2C075RD
• Tinned Copper
• 200M Reel-n-Box
• Metre Marked
• "BEP PVC"
FIRE ALARM CABLE 2 CORE
1.25MM 200M BOX - RED
MSRB2C125RDBX
• Tinned Copper
• 200M Reel-n-Box
• Metre Marked
• "BEP PVC"
FIRE ALARM CABLE 2C 2.0MM
200M REEL - RED
MSR2BC2RD
• Tinned Copper
• Strong Wooden Drums
• Metre Marked
• "BEP PVC"
FIRE ALARM CABLE 2 CORE
1.25MM 200M REEL - LSZH RED
MSRB2C125RDLS
• Tinned Copper
• Low Smoke Zero Halogen
• Metre Marked
• Suitable for Green Building Installs
FIRE ALARM CABLE 2 CORE 0.75MM 200M REEL - SCREENED RED
Screened against Interference
FIRE ALARM CABLE 2 CORE 1.25MM
200M REEL - SCREENED RED
Screened against Interference
ENERGY READY
MOD6+ RANGE
The MOD6+ circuit protection range offers reliable performance and cost effective solutions for both domestic and commercial applications. With seamless integration to NHP MOD6+ compatible panelboards and loadcentres, the range is certified to AS/NZS standards providing a minimum genuine 6kA short circuit rating.
MOD6+ RCBO 6KA 1P+N 10A C CURVE
30MA TYPE A DOUBLE SCREW
NHPMD6RD1030A
MOD6+ RCBO 6KA 1P+N 16A C CURVE
30MA TYPE A DOUBLE SCREW
NHPMD6RD1630A
MOD6+ RCBO 6KA 1P+N 20A C CURVE
30MA TYPE A DOUBLE SCREW
NHPMD6RD2030A
DELTA AC MAX
SMART 7-22KW
EV CHGR T2
TETH 5M CABLE & COMMS
DEAEIAWE22KTS54
MOD6+ RCBO 6KA 1P+N 25A C CURVE
30MA TYPE A DOUBLE SCREW
NHPMD6RD2530A
MOD6+ RCBO 6KA 1P+N 32A C CURVE
30MA TYPE A DOUBLE SCREW
NHPMD6RD3230A
EV CHARGERS
DELTA RANGE
DELTA DC 100KW EV CHARGER CITY CCS2 & CHADEMO & AC T2 SOCKET DEAEVDE25E4DUM
DELTA DC 25KW EV CHARGER WALLBOX TYPE CCS2 DEAEIDWE50TSEA2
DELTA DC 100KW CITY CHARGER CCS2 & CCS2 DEAEVHE104EFCA5
Schneider Charge Smart Residential EV Charger
Your Gateway to Seamless Home EV Charging
Looking to gear your business up to maximise the growing New Zealand EV residential charging market?
Schneider Charge is an easy-to-install, aesthetic, eco-smart and robust charger that ensure the right charge in residential settings, minimises peak impacts, and avoids power overruns -all at an a ordable price.
It also allows a convenient charge of the vehicle at home without impacting power availability.
Key features:
• In-built RDC-DD
• 1Phase: 7.4kW | 3Phase: 11 - 22kW options
• Wall mounted
• OCPP Communication
• Attached cable 5m or 7m or Type 2 socket
• Compatible with home anti-tripping system (Peak Controller)
• CTs are included with Peak Controllers
• Certification IEC 61851-1 Ed. 3.0
• RCM GMA-518099
Schneider Charge Pro EV charger for apartment buildings
Quick and easy to install and commission
Quick and easy to install and commission
7.4/11/22kW 1P and 3P 16-32A power ratings
7.4 - 22kW, 1 - 3 P 16 - 32A power ratings
Compatible with EV Charging Expert (Schneider LMS)
Load Management System available –EV Charging Expert
Authentication with RIFD/NFC Reader
Authentication with RIFD/NFC Reader
4G is optional, Wi-Fi Modem
Integrated Wi-Fi Module and optional 4G modem
T2S socket or 7m attached cable
T2S socket or 7m attached cable
A complete solution with flexible mounting options, advanced connectivity and seamless integration.
A complete solution optimising comfort, billing and EV charging for residents
Discover more
Discover more
PDL’s most versatile surface socket
One socket, endless possibilities!
Designed with electricians, the new PDL51SSE brings practical updates to a trusted classic. Its compact form, thoughtful cable entry options and installer friendly layout make it ideal for tight or hard to reach areas.
Horizontal + Vertical cable entry
Rotate base 180° for a large or small cable entry option
The refined translucent edge that surrounds allure, accentuates its elegant profile – only 9mm off the wall surface, creating a unique floating effect.
ALLURE DOUBLE
SOCKET - GLOSS
WHITE
HAGWBHP2S
ALLURE 2 GANG
SWITCH - GLOSS
WHITE
HAGWBHSV2
SILHOUETTE
SO FINE, JUST STUNNING
With a simple and elegant form based on the serene balance of proportions and the reduction of the object essentials, the silhouette range gives each product the right tone of voice in order to fit within its environment.
SILHOUETTE
DOUBLE SOCKET - MATT WHITE
HAGWBSP2SMW
FINESSE
MINIMAL, SLEEK
The architecturally inspired finesse range is sure to impress audiences with its minimalistic and precise design, and is considered to be ingeniously simplistic.
FINESSE DOUBLE
SOCKET - MATT
WHITE
HAGWBQP2SMW
SILHOUETTE 2
GANG SWITCHMATT WHITE
HAGWBSSV2MW
FINESSE 2 GANG
SWITCH - MATT
WHITE
HAGWBQSV2MW
ALLURE 1 GANG
SWITCH - GLOSS
WHITE
HAGWBHSV1
SILHOUETTE 1
GANG SWITCHMATT WHITE
HAGWBSSV1MW
FINESSE 1 GANG
SWITCH - MATT
WHITE
HAGWBQSV1MW
INVICTA PANELBOARD
36P 160A ISO
HAGJVC3600S16TW
INVICTA PANELBOARD
48P 160A ISO
HAGJVC4800S16TW
INVICTA PANELBOARD
60P 160A ISO
HAGJVC6000S16TW
INVICTA PANELBOARD
72P 160A ISO
HAGJVC7200S16TW
STIEBEL ELTRON:
100 YEARS OF EXCELLENCE IN ELECTRIC SOLUTIONS
Give Your Hot Water the Comfort Factor
+1000 POINTS
The award-winning SHP-O heat pump integrates seamlessly into any home, delivering reliable hot water no matter your existing setup. By harnessing ambient heat, it reduces reliance on gas, helping to create a cleaner environment. With its eco-friendly R290 refrigerant and compatibility with solar PV systems, it offers both efficiency and sustainability. In 2025, the SHP-O was recognised with German Design Award Gold, an iF Design Award, and a Red Dot Award: Product Design for its blend of performance and elegant design.
Simple, Convenient Control
Manage your hot water system with ease: simply connect the heat pump to the MyStiebel App. Adjust settings anytime, anywhere — even when you’re away from home. Your installer can also provide remote support through the Servicewelt portal, often reducing the need for on-site visits.
PREMIUM HOT WATER HEAT PUMP 1.5KW 1PH
200L
SBLSHPO201
PREMIUM HOT WATER HEAT PUMP 1.5KW 1PH
300L
SBLSHPO301
AIRCON
DUCTING
AussieDuct air conditioning ducting is engineered for durability, efficiency, and installer confidence.
Flexible, lightweight, and easy to install, AussieDuct is built to handle tough job-site conditions while providing reliable, long-lasting performance you can trust.
• uPVC
• UV Resistant
• High impact resistance
• Greenstar B.E.P Compliant
• 0 to 60 C
AIR-CON DUCT OFFERS
80MM AC CEILING CAP
AUDPD80CC
AIRCON DUCT FLEXI JOINT 80MM
AUDPD80FJ
AIRCON DUCT ELBOW 80MM
AUDPD80E
AIRCON DUCT 80MM 2M
AUDPD80IV2000
AIRCON DUCT JOINT 80MM
AUDPD80J
AIRCON DUCT WALL CAP 80MM
AUDPD80WC
80MM AC CORNER
AUDPD80C
AIRCON DUCT MOUNTING BLOCK
AUDPDMBIV450
BETTER AIR SOLUTIONS
WITH TOSHIBA AND TOTALINE
INSULATED PAIRCOIL (BOX)
• 20mtr box of totaline paircoil
100 POINTS
BETTER AIR SOLUTIONS
WITH TOSHIBA AND TOTALINE
TOSHIBA SEIYA WALL
HEATPUMP
• Stylish design hi wall with high effeciency
• Power wired either to indoor or outdoor
• Wifi options
• Uses R32 Environmentally friendly Refrigerant
• Power Supply option to both Indoor or Outdoor Wi-Fi Ready - Control from anywhere by adding optional Wi-Fi Controller
• 3-D Air Flow - Independent Louvre Control 22-36k Model
• Infra-Red Controller also Wired connectable
• 8 Degree and Fire Place Mode
• Quiet Mode
• Magic Coil - Aqua Resin Coated Coil for Heathy Fresh Air
TRUSTED BY ELECTRICIANS AND HVAC INDUSTRY PROFESSIONALS
MANROSE DESIGNER HFL LED PANEL 150MM
MANFAN6577
• Tri-Colour LED
• Low profile linear design
• Halogen heater offers superior heating in a small space
• Extraction fan helps remove steam
150mm QUIET WALL/ CEILING BATHROOM KITCHEN FAN WITH HUMIDITY SENSOR
MANFAN7185
NZ designed humidity automation
Efficient 150mm design Quiet monofilm backdraught shutter Designed for G4 Bathrooms and Kitchens
CONTOUR 150MM BATHROOM FAN
BODY-NO FASCIA
MANFAN7031
• Efficient high pressure centrifugal fan suitable for long duct runs and big bathrooms
• Integrated backdraught shutter with deep spigot
• Designed for G4 Bathrooms
• Compatible with a wide range of stylish fascias
150mm QUIET THROUGH WALL BATHROOM KITCHEN KIT WITH HUMIDITY SENSOR
MANFAN7192
• NZ designed humidity automation
• Efficient 150mm design
• Quiet monofilm backdraught shutter
• Designed for G4 Bathrooms and Kitchens
TEMPESTA 1650W SIDEDRAFT HAND DRYER ABS WHITE
MANFAN7423
• ABS Housing
• 50-65dB(a)
• 10-15 second dry time
• Adjustable Air Speed
CONTOUR LARGE ROUND FASCIA MATTE
WHITE MANDCT4710
• Matte white finish
• Stylish slim line design
• Super low profile
• Fascias are easy to install, remove and clean
VENTO 1350W HAND DRYER
MANFAN7421 (WHITE)
MANFAN7422 (BLACK)
• Stainless Steel 304 Housing
• 50-70dB(a)
• 10-15 second dry time
• Adjustable Air Speed
CONTOUR LARGE ROUND FASCIA & TRI COLOUR LED MATTE WHITE MANDCT4714
• Switchable tri-colour LED range
THIN DRY 1KW HAND DRYER
MANFAN7418 (WHITE S/S)
MANFAN7419 (BLACK S/S)
MANFAN7420 (BRUSHED S/S)
Stainless Steel 304 Housing 74dB(a) 10-15 second dry time ADA Compliant
SMARTVENT BALANCE
• 90% Of Heat Energy Recovered
• Fully Automated
• Can extract from wet rooms
• Effortless Summer Cooling
MANFAN6838
CNTERFLW HRV SYSTEM
MANFAN6839
+1000 POINTS
• SMARTVENT BALANCE BAL225 3 OUTLET
• SMARTVENT BALANCE BAL405 5 OUTLET
CNTERFLW HRV SYSTEM
What makes Jinko Tiger Neo 3 different?
Higher output, fewer panels
Easier and faster installs with lower balance-of-system cost
Industry leading efficiency
Up to ~23%+ efficiency, well above the competition
Better performance in NZ conditions
Strong low-light performance and improved output in mornings, evenings and cloudy days
Handles heat better
Lower temperature losses vs traditional panels and more constant output on hot roofs
More energy over the life of the system
Very low degredation & long reliable warranties means more lifetime generation for customers
Built for durability
Dual glass construction with high wind and snow loadings
STOP PRESS: Rooftop Solar Reaches Historic Milestone
Its celebration time! June 30th, 2026, marks a significant milestone in NZ's solar industry, with rooftop and distributed solar surpassing 1 gigawatt of installed capacity, connected across 88,126 ICPs. This milestone reflects solar adoption by households, businesses, farms, schools, and industrial facilities across the country.
Key Highlights:
• 1 GW of distributed solar installed across New Zealand.
• 88,126 homes, businesses, farms, schools and industrial sites are now generating their own electricity.
• More rooftop solar has been installed in the past three years than in the previous decade combined.
• Solar is no longer a niche technology—it has become an important part of the infrastructure of our electricity system and energy resilience.
When Will New Zealand Reach the Next 1 GW?
Based on our modelling, current trends and organic growth, the next 1 GW of distributed rooftop and small-scale solar could be installed within the next 3.5 years
This forecast is based on:
• Annual installation rates have accelerated significantly over past three years.
• Average system sizes continue to increase as commercial and industrial installations become more common.
• Battery prices are declining, making solar-plusstorage increasingly attractive with ~ 60 - 70% take up today.
• The removal of regulatory barriers and increasing funding and investment availability to sustain growth
Why This Matters
• The first gigawatt proves rooftop solar works in New Zealand.
• The second gigawatt will prove how quickly Kiwi's will embrace clean, affordable energy when the economics and policy settings align.
• The first gigawatt took over a decade. The second gigawatt will arrive much faster, demonstrating that the industry is moving from early-adopter phase into first stage of mass-market deployment.
• With more supportive policies, affordable finance, and streamlined network connection processes in play, we can exceed this forecast and establish distributed solar as the country's fastest-growing source of new electricity generation.
RENEWABLE ENERGY SOLUTIONS
Ideal Electrical is the leading national distributor of high quality equipment for this fast growing market segment. We stock of a wide range of products to help you with your next project regardless of size; from one panel for a mountaintop radio repeater, to domestic houses, through commercial solar farms. We can also help you design and specify the right equipment to give your customers the best possible outcome and investment choice.
