UNROLLA TX235 UNROLLA TX235 2 BALE SELF-LOADING BALE FEEDER Every part of the new TX235 has been built around three major improvements: Cleaner Feeding – Get more feed where animals can eat it. And less where tyres can destroy it. Unmatched Stability – Wider stance. Lower centre of gravity. Unmatched stability when the terrain gets tough. Superior Fine Chopped Bale Control – Easier loading and feeding of fine chopped bales. Add an all-new extreme-duty loading system, and you’ve got a machine built to handle today’s toughest feeding conditions. Because when every bale counts, every detail matters. eliminates the need for wearing parts and flails that cost you and arm and leg to maintain. LOW MAINTENANCE BEARINGS Protected double sealed heavy-duty 4-bolt bearings with trash shields are mounted outboard of the Trailed Round Bale Feeder feeding chamber. Making them last longer than
STRONGEST FEEDING BARS
TOUGH POLYETHYLENE FLOOR Fully enclosed extruded polyethylene floor reduces feed waste and it will never corrode. Being polyethylene it is slippery with 30% less drag compared to steel which makes feeding sticky silage or wet bales easy.
Bars are 4-5 times stronger torsionally than angle type bars of the same size. We’ve bolted them to the chain which is stronger and for different bale types, blank bars or bars with more aggressive teeth are available and can simply be bolted on in a matter of minutes.
ENCLOSED HARDLINETM SPROCKETS Our taller 6 tooth sprockets are made from Bisalloy (the same material a bulldozer blade is made from) so they last forever. With smaller diameter sprockets less torque is required to drive the chains, giving more drive power for tough bales. Designed so it is impossible for the chain to jump off the sprocket saves you downtime in the field.
SIMPLE SINGLE LEVER CONTROL The double bale feeder has single level feed control, and can feed out to either side, making it very easy to use. Ideal for low skilled staff. handle heavy bales with ease.
60MM 6-STUD AXLE
TOUGHEST CHAIN ON THE MARKET
You need to feed out in all conditions, so we’ve fitted the strongest stub axle on the market. The Unroller TX235 Double Bale Feeder is suited to the fastest tractors available today. We’ve also made it adjustable so that it suits any terrain, without running over the feed.
Zinc plated chains rated to 12,000 lbs each with the larger diameter rollers and pins make our chain drive system almost twice as strong as our competitors. And the greater surface on each roller pin increases chain life because they can’t stretch or snake.
CHASSIS DESIGN
HILL COUNTRY STABILTY
We’ve eliminated bolts from the design with a fully welded construction, maintained huge ground clearance and kept the chassis rails the lowest point of the feeder so that if you do belly out, you’re not damaging feeding chains or bars.
A lower centre of gravity and widest wheel track on the market means greater safety and peace of mind when the going gets steep
SINLGE POST DRAWBAR Our single post drawbar design has set the benchmark in feeder manoeuvrability. Now it is completely removable, which means you can replace it without having to buy a whole new chassis. By lowering the drawbar, we’ve made it easier stepping from side to side, and now 8mm thick we challenge you to bend it!
LOADING SEQUENCE: UNROLLA TX235 - TOTAL CONTROL LOADING SYSTEM
01 Back tines into bale
04 Tines withdraw
02 Bale is always under control
03 Remove net wrap
05 Tines ready to pick up 2nd bale
06 Bales in transport position
SPECIFICATIONS BALE SIZES ROUND: 4’ x 4’ – 6’ x 5’ BALE WEIGHT: 2 bales up to 1,500kg | 3,306 lb each UNIT WEIGHT: 1,165 kg | 2,160 lb CAPACITY: 2 x bales (round) TOWING EYE: Adjustable height 45 mm swivelling forged eye | 1.7 in swiveling forged eye. 12 t rated | 2,6000 lb rated.
AXLES: 6 stud, 60 mm square axle | 2.36 in square axle WHEELS: 400/60/15.5 HYDRAULICS REQUIRED: 2 x double-acting, 30-60 litres/min | 8-16 gal/min, 2250-3000psi
LOADING: Extreme Duty Patented Total Control Self-loading system CHAIN: Twin 12,000 lb roller chains FINISH: Full White Sandblast + Arma Coat Finish
UNROLLA TX235