(EN) DM 540i Brochure

DM 540i

READY SET DONE BATTERY CORE DRILL MOTOR

FREEDOM TO MOVE Husqvarna DM 540i Imagine moving freely between work sites, building levels and drilling tasks without cords or the need to locate a power source. Our powerful battery core drill DM 540i will turn many a core drilling mission into a smooth, agile and empowering experience.

Let DM 540i keep up with you and experience freedom to move. Our most ergonomic core drill yet is here, charged with possibilities.

DM 540i HIGH PERFORMANCE COMPACT & LIGHTWEIGHT EASY TO USE I-SERIES BATTERY SYSTEM

EXPERIENCE PORTABLE Husqvarna DM 540i is a powerful battery drill motor optimised for handheld drilling of diameters up to 75 mm and up to 100 mm with drill stand DS 150. It can be used in light reinforced concrete for both wet and dry drilling and suitable materials include bricks and building blocks.

BATTERY POWERED FOR INCREASED PRODUCTIVITY

IMPRESSIVE ERGONOMICS

Without the need for power from the grid or time-consuming equipment set-up procedures, productivity is increased.

Ergonomic design, low weight and a well-balanced machine body deliver easier, more comfortable operation in confined spaces without putting excess strain on your body.

FLEXIBLE AND EFFICIENT Can be used outdoors or indoors and for wet and dry drilling. Combined with our drill stand, it enables a flexible, efficient working day.

E POWER

SMART BATTERY PLACEMENT The side-fed battery placement maximises cooling so that you can continue to drill without interruptions.

ONE BATTERY SYSTEM DM 540i is part of an ecosystem of products. The BLi batteries fit several other Husqvarna products, meaning you do not need to purchase individual batteries for these, and can expand your business if required.

Related battery-powered products are the dust extractor DE 110i, the water tank WT 15i and the power cutter K 535i.

RECOMMENDED BATTERY

BLI 300

BUILT-IN CONNECTIVITY Enables effortless onboarding and asset management in Husqvarna Fleet Services™ where you easily can monitor location, runtime, service intervals and receive wireless updates.

EFFICIENT BRUSHLESS MOTOR Our in-house developed, advanced brushless motor is 25% more efficient than a standard brush motor. This lets it deliver a high and consistent torque.

SPECIALLY DEVELOPED DRILL BITS The new range of thin-walled Husqvarna drill bits provide a better utilisation of the machine's battery power. Thanks to the diamond specification, you will experience smoother and faster drilling speed without requiring too much load. You can also expect a quick and precise start. Available for drilling from Ø 25–100 mm max 350 mm in depth. Can also be used in other low powered drill motors.

LOW MAINTENANCE Fewer parts to service reduces downtime and operating costs.

BE PART OF AN AGILE TEAM To perform in a high tempo environment and deliver results, you need a reliable and agile team.

Husqvarna's i-Series battery range is growing and together with the right accessories, you're all-set up to take on the toughest jobs, anytime, anywhere.

DM 540i TECHNICAL SPECIFICATIONS Motor type

BLDC (brushless)

Output power on spindle shaft, W

1350

Nominal voltage, V

36

Recommended battery

BLi 300

Drill diameter in concrete:

Ø 15-75 mm handheld and up to 100 mm with drillstand

Dimensions, mm (L x H):

445 x 272

Weight (incl. battery), kg

6,8 kg

OPERATING DATA Mechanical gear

1

2

Spindle speed, no load E-gear 1, rpm

770

2400

Spindle speed, no load E-gear 2, rpm

1400

4450

Drill diameter in concrete, mm / inch

50-100 / 2-4 *

15-50 / 1-2 *

* Optimized for handheld drilling Ø 25–75 mm, (1-3 inch) but also functional in a drill stand (DS 150 or DS 250) and then possible to drill Ø 25-100 mm (1-4 inch).

DUST COLLECTOR – DE 110i ■ ■ ■ ■

H-class Compact & easy to use Battery BLi300 Connectivity features

WATER TANK – WT 15i ■ ■ ■ ■

Volume of 15 liter Electrical pump Battery BLi100 Built-in charger compartment

BATTERIES – BLi100 / 200 / 300 ■ ■ ■

High power, low weight 4-LED charge level indicator Rechargeable more than 1,500 times

POWER CUTTER – K 535i ■ ■ ■ ■

Low vibrations and user-friendly ergonomics Excellent power-to-weight ratio Batteries BLi200 / BLi300 Adaptable for wet and dry cutting

DRILL STAND – DS 150 ■ ■ ■ ■

Versatile & lightweight Straight and accurate drilling User-friendly base plate Carrying handle

COMING SOON!

SLURRY COLLECTOR – W 25OP ■ ■ ■ ■

Electrical wet & slurry vacuum Robust & powerful Stainless steel components Pumping out can take place at the same time as suction

DRILLING CAPACITY WET DRILLING WITH BLi300* CONCRETE SLAB (270 mm, no reinforcement)

CINDER BLOCK (390 x 150 x 167 mm)

HOLE DIAMETER, MM

NUMBER OF HOLES (270 mm)

LECA (590 x 150 x 190 mm)

HOLE DIAMETER, MM

NUMBER OF HOLES (150 mm)

Ø 25

Up to 12 holes

Ø 25

Up to 250

Ø 50

Up to 7 holes

Ø 50

Up to 200

Ø 75

Up to 5 holes

Ø 75

Up to 150

Ø 100 (drill stand)

Up to 3 holes

HOLE DIAMETER, MM

NUMBER OF HOLES (150 mm)

HOLE DIAMETER, MM

NUMBER OF HOLES (120 mm)

BRICK (250 x 120 x 62 mm)

Ø 25

Up to 65 holes

Ø 25

Up to 53 holes

Ø 50

Up to 32 holes

Ø 50

Up to 40 holes

Ø 75

Up to 16 holes

Ø 75

Up to 23 holes

* Drilling results may vary depending operator skills, ambient conditions, type of material and the quality of the diamond core drill bit and should be viewed as indicative only.

For this chart a DM 540i and a BLi300 battery was used, running the battery from fully charged to empty, with an Elite-Drill TW core drill bit for wet drilling.

QUICK CHARGING. LONG-LASTING PERFORMANCE. The working time available with a fully charged battery depends on three variables: the capacity of the battery, which machine the battery is used with and if you’re doing light or tough cutting / trimming. The batteries work with all products in the Husqvarna battery range, making investing in the battery system a really smart and economic choice.

The charging time for a fully discharged battery depends on the capacity of the battery and which of the chargers you use. In many cases the charging time will be shorter than the working time. This means with two batteries available, you can work continuously – one battery operating and the other battery charging.

BATTERIES HUSQVARNA BLi100 / 200 / 300 HIGH POWER. LOW WEIGHT. Batteries with both excellent runtime and capacity to weight ratio. They all feature a 4-LED charge level indicator, all-weather operation and excellent cooling. Rechargeable more than 1,500 times.

Capacity: 2.6 /5.2 / 9.4 Ah Weight: 0.8 /1.3 / 1.9 kg

CHARGERS

HUSQVARNA QC500 FOR SUPER-FAST CHARGING Charges BLi300 50 % faster than the QC330 charger. Active battery cooling for minimum charge time and longer battery life, plus 2-LED status indicator and high-power output.

HUSQVARNA QC330 OPTIMISED FOR ALL BLi-BATTERIES Quick charging unit with 2-LED status indicator and active battery cooling for minimum charge time and longer battery life.

HUSQVARNA QC80F FIELD CHARGER

HUSQVARNA VI 600F INVERTER

For charging in 12 V car / truck outlet in the field.

Enables charging in the field by converting 12 V DC from any lead acid battery to 220 V AC for your QC500, QC330 or QC80F quick chargers.

CHARGING TIME FOR DIFFERENT BATTERIES AND CHARGERS BATTERY

CHARGING CYCLES

QC500 CHARGING LEVEL

QC330 CHARGING LEVEL

QC80F CHARGING LEVEL

BLi100

1,500

30 min

50 min

30 min

50 min

1 h 5 min

1 h 25 min

BLi200

1,500

30 min

50 min

30 min

50 min

2 h 25 min

2 h 40 min

BLi300

1,500

35 min

1h

55 min

1 h 20 min

4h

4 h 20 min

FLEET STAY IN CONTROL WITH HUSQVARNA FLEET SERVICES™ MACHINE LOCATION It’s easy to keep track of your Husqvarna DM 540i battery core drill. As soon as a machine is within Bluetooth® wireless connectivity distance from a smartphone with the Husqvarna Fleet Services™ app, its location is registered.

So, if you’re looking for a machine, just check the map to see if it is in the storage, away for service or out working.

INVENTORY CONTROL All your Husqvarna DM 540i machines, one screen. With Husqvarna Fleet Services™, you just check the inventory list, and you know exactly how many machines you have of each type. Give them unique names, and you can easily tell one from another.

COMPREHENSIVE MACHINE STATISTICS

SERVICE HISTORY AND NOTIFICATIONS

The sensors track the running hours of your Husqvarna DM 540i machines, so you can know exactly how much they have been used since you bought them.

You can also check the workday log to get a detailed view of how many hours they have been used each day.

With Husqvarna Fleet Services™, you can have access to the service history for each machine and battery, making it much easier to keep track of status and troubleshoot, if necessary.

You can also get service reminders based on actual running hours, to make sure you always keep your machine in top shape.

ACCESSORIES SLURRY RINGS

VACUUM PUMP

WT2GO

WT 15i

WHEEL KIT COMING SOON!

DS 150

DRILL SNAP

W250 P

DE 110i

ELITE-DRILL TW SERIES

OUR PROMISE TO YOU When you choose Husqvarna, you’re opening up a world of opportunities.

See how we can work together to make things smoother, easier and more productive for you. You can expect services that enhance the high output in your machines, your team and your business. Keeping you at the forefront.

That’s our promise to you.

GET YOURS TODAY! Stop by your local Husqvarna representative and experience freedom to move with the all-new battery drill motor DM 540i. You will be surprised by the high performance combined with a compact size.

www.husqvarnacp.com Copyright © 2021 Husqvarna AB (publ). All rights reserved. Husqvarna and other product and feature marks are trademarks of the Husqvarna Group or its licensors.

We reserve the right to make changes in technology and specifications without prior notice.