USDA-APHIS International Services Uniform Program

IS100

Men’s Short Sleeve Poplin Shirt with Pocket

Men’s Short Sleeve Poplin Shirt 65/35 Polyester Cotton fabric blend

4.0/4.25 oz. wt. Traditional Fit, full silhouette with generous cut for more room in body, chest, waist, and sleeve, back box pleat. Wood tone buttons, button down collar, and left chest pocket.

Color: White

Embroidered USDA Logo

IS101

Women’s Short Sleeve Poplin Shirt with Pocket

Women’s Short Sleeve Poplin Shirt 65/35 Polyester Cotton fabric blend

4.0/4.25 oz. wt. Traditional Fit, full silhouette with generous cut for more room in body, chest, waist, and sleeve, back box pleat. Wood tone buttons, button down collar, and left chest pocket.

Color: White Embroidered USDA Logo

IS100 NO LOGO MEN’S TOPS

Men’s Short Sleeve Poplin Shirt with Pocket No Logo

Men’s Short Sleeve Poplin Shirt 65/35 Polyester Cotton fabric blend 4.0/4.25 oz. wt. Traditional Fit, full silhouette with generous cut for more room in body, chest, waist, and sleeve, back box pleat. Wood tone buttons, button down collar, and left chest pocket. Color: White Only NO LOGO

WOMEN’S TOPS

IS101 NO LOGO

Women’s Short Sleeve Poplin Shirt with Pocket No Logo

Women’s Short Sleeve Poplin Shirt 65/35 Polyester Cotton fabric blend 4.0/4.25 oz. wt. Traditional Fit, full silhouette with generous cut for more room in body, chest, waist, and sleeve, back box pleat. Wood tone buttons, button down collar, and left chest pocket. Color: White Only NO LOGO

$3550

$3910

IS102

Men’s Long Sleeve Poplin Shirt with Pocket

Men’s Long Sleeve Poplin Shirt 65/35 Polyester Cotton fabric blend

4.0/4.25 oz. wt. Traditional Fit, full silhouette with generous cut for more room in body, chest, waist, and sleeve, back box pleat. Wood tone buttons, button down collar, adjustable two button cuff and left chest pocket.

Color: French Blue, White Embroidered USDA Logo

MEN’S TOPS

IS102 NO LOGO

Men’s Long Sleeve Poplin Shirt with Pocket No Logo

Men’s Long Sleeve Poplin Shirt 65/35 Polyester Cotton fabric blend 4.0/4.25 oz. wt. Traditional Fit, full silhouette with generous cut for more room in body, chest, waist, and sleeve, back box pleat. Wood tone buttons, button down collar, adjustable two button cuff and left chest pocket.

Color: White Only NO LOGO

IS103

Women’s Long Sleeve Poplin Shirt with Pocket

$3400

Women’s Long Sleeve Poplin Shirt 65/35 Polyester Cotton fabric blend 4.0/4.25 oz. wt. Traditional Fit, full silhouette with generous cut for more room in body, chest, waist, and sleeve, back box pleat. Wood tone buttons, button down collar, adjustable two button cuff and left chest pocket.

Color: French Blue, White Embroidered USDA Logo

IS151

Unisex Short Sleeve T-Shirt with Pocket

$2200

100% Ring spun Cotton 6.1oz wt.. With five point left chest pocket. Double needle stitching throughout, cover seamed neck with lay flat collar and tag free neck label. Color: Sand Screen Printed USDA Logo.

IS103 NO LOGO

Women’s Long Sleeve Poplin Shirt with Pocket No Logo

Women’s Long Sleeve Poplin Shirt 65/35 Polyester Cotton fabric blend 4.0/4.25 oz. wt. Traditional Fit, full silhouette with generous cut for more room in body, chest, waist, and sleeve, back box pleat. Wood tone buttons, button down collar, adjustable two button cuff and left chest pocket.

Color: White NO LOGO

www.usda-aphisuniform.com

MEN’S & WOMEN’S

BOTTOMS

IS200 IS201

Men’s Microfiber Dress Pants

Men’s Microfiber Flat Front Dress Pants, 100% Polyester Microfiber

6.7oz, Hook/eye front closure zipper front, hidden stretch waistband, 2 front pockets, one back pocket moisture wicking fabric, soil and wrinkle resistant Color: Navy, Tan

Note: All pants ordered with an inseam length of 28” or below are Non-Returnable

Women’s Microfiber Dress Pants

Women’s Microfiber Flat Front Dress Pants, 100% Polyester Microfiber 6.7oz, Hook/eye front closure zipper front, hidden stretch waistband, 2 front pockets, one back pocket Color: Navy, Tan

Note: All pants ordered with an inseam length of 28” or below are Non-Returnable

BOTTOMS

IS202

Men’s Jean Cut Work Pants

Men’s Jean Cut Work Pants 65/35 Poly Cotton Twill 8oz. Two frontier style front pockets, two double needle patch hip pockets, heavy duty brass front zipper with button closure, Slight taper silhouette Color: Navy

Note: All pants ordered with an inseam

or

$4710

$4710

$2450

$2310

IS203

Women’s East Fit Work Pants

Women’s 65/35 Poly Cotton Easy Fit Work Pants, 7.5oz, side elastic waist inserts, Two front pockets, two set-in hip pockets, slightly tapered leg

Color: Khaki

Note: All pants ordered with an inseam length of 28” or below are Non-Returnable

MEN’S BOTTOMS

$2310

IS204

Men’s Easy Fit Work Pants

Men’s 65/35 Poly Cotton Easy Fit Work Pants, 7.5oz, side elastic waist inserts, Two slack style front pockets, two set-in hip pockets, heavy duty brass front zipper with button closure

Color: Khaki

Note: All pants ordered with an inseam length of 28” or below are Non-Returnable

Women’s Dickies Work Pants

Note: All pants ordered with an inseam length of 28” or

BOTTOMS

Men’s Dickies Work Pants

Women’s Work Pants 65/35 Polyester Cotton Twill 8.5 oz fabric, original fit straight leg, two back welt pockets, metal hook and bar closure.

Color: Dark Navy, Khaki

$2870

Men’s Work Pants 65/35 Polyester Heavyweight Cotton Twill 8.5 oz fabric, loose fit double knee, straight leg, metal hook and bar closure waistband that sits at waist.

Color: Dark Navy, Khaki

UNISEX

$9900

IS300

Unisex Rain Jacket with Hood

Breathable Series Jacket, waterproof, windproof, breathable fabric, tuck away hood, Nylon taffeta lining, Zippered front closure, 2 double entry pockets.

Color: Black Heat Transfer USDA Logo

IS302

Unisex Performance Jacket

Breathable Waterproof Coating with Windproof, Waterproof breathable membrane, zip out Prima Loft liner two way zipper with internal storm flap, tunnel collar, Elastic extending ¾ around waist with side access zippers, elastic cuffs, concealed front pockets

Color: Spruce Green

Heat Transfer USDA Logo

IS310BK

Unisex Dri Duck Jacket with Hood

Dri Duck Active Jacket 100% Cotton quarry washed Boulder Cloth

Canvas 12oz wt., quilted brushed tricot lined body and hood, rib knit cuffs and waistband with spandex, heavy duty metal zipper, 2 front pouch pockets.

Color: Black

Embroidered USDA Logo

IS302 NO LOGO

Unisex Performance Jacket

Breathable Waterproof Coating with Windproof, Waterproof breathable membrane, zip out Prima Loft liner two way zipper with internal storm flap, tunnel collar, Elastic extending ¾ around waist with side access zippers, elastic cuffs, concealed front pockets

Color: Spruce Green NO LOGO

IS310BK NO LOGO

Unisex Dri Duck Jacket with Hood

Dri Duck Active Jacket 100% Cotton quarry washed Boulder Cloth

Canvas 12oz wt., quilted brushed tricot lined body and hood, rib knit cuffs and waistband with spandex, heavy duty metal zipper, 2 front pouch pockets.

Color: Black NO LOGO

$7270

IS370

Unisex Rain Coat USDA on Back

Polyurethane coated nylon 48” long coat. Leaf collar with snaps for detachable matching hood (included). Storm flaps with snaps, slash pockets, badge tab.

Color: Yellow Heat Transfer USDA on back

IS504

Unisex Structured Baseball Cap Stone

Baseball Cap

100% Cotton Twill, Structured, 6 Panel, pre curved visor, mid profile with adjustable hook and loop Velcro closure

Color: Khaki

Embroidered USDA Logo

IS552

Unisex Breezer Style Hat

Breezer Hat 100% Cotton breathable mesh. 1” detachable hat band 3” brim and chin cord.

Color: Khaki

Embroidered USDA on hat band

ACCESSORIES

UNISEX

IS500

Lightweight Perforated Cap

Baseball Cap 100% Polyester, Unstructured, low profile, hook and loop

Color: Stone

Embroidered USDA Logo

IS522

Unisex Wool Knit Ski Cap

100% Wool Knit Cuff Cap appoximately 12” long.

Color: Black

Embroidered USDA Logo

$1540

$5060

$1760

$1410

Measuring Guide

Our belts are measured from the fold over the buckle to the center hole. That distance is the waist size to order.

Our belts have 7 holes for best fit.

HOW TO MEASURE:

Have someone else measure you. Keep the tape straight but not tight. Measure over undergarments or other clothing that will be worn under your uniform. If your measurements fall between two sizes, order the larger size.

FEMALE MEASURING GUIDE AND TIPS:

HEIGHT: Stand against a wall in stocking feet. Mark a point level with the top of your head. Measure from this point down to the floor. (Shoe heels can add inches to your height.) See measurement A.

CHEST: To measure a woman’s chest, wrap the tape beneath her armpits, fully encircling her body around her shoulder plates and the fullest part of her bust. For best results, she should wear a non-padded bra and relax her arms at her sides. Make sure not to cinch the tape so tight that it compresses the bust. See measurement B.

WAIST: Measure around the smallest part of the natural waistline. Hold tape firmly but not tightly. Keep the tape level and be sure to stand naturally. See measurement C.

HIPS: Measure around the fullest part of the hips. Hold the tape measure firmly, but not tightly. Keep the tape measure straight and level. See measurement D.

INSEAM LENGTH: Lay well-fitting similarly styled pair of slacks with a flat crease at back and front. Lift one leg and measure from crotch to seam to bottom of slacks leg. See measurements M and N.

MALE MEASURING GUIDE AND TIPS:

HEIGHT: Stand against a wall in stocking feet. Mark a point level with the top of the head. Measure from this point down to the floor. See measurement E.

CHEST: Measure around the fullest part of the chest, keeping the tape under the arms and across the shoulder blades. See measurement F.

WAIST: Measure around the waist over the shirt (not slacks) at the position that you wear your slacks. Keep one finger between the tape and your body. Or, measure the waistband of a well fitting pair of similar slacks (zipped and closed). See measurement G.

SLEEVE: Measure from center of neck at back of the collar, over the shoulder, along the arm, behind the elbow, to the wrist bone, (Or take marked sleeve length sizing from a dress shirt that fits you properly). See measurement H and I.

NECK: On a shirt that fits you well, lay the collar flat. Measure the collar from the center of the collar button to the far end of the collar button hole. See measurement J or K. Or, measure comfortably around your neck.

INSEAM LENGTH: Lay well-fitting and similarly styled pair of slacks flat with the crease at the back and front. Lift one leg and measure from the crotch seam to the bottom of the slacks leg. See measurement M and N.

HEAD: Measure the distance around your head at the position where your hat normally rests, using a soft tape measure (dressmaker/ tailor type). This is usually done right above the ears and across the forehead. See measurement O.

CARE INSTRUCTIONS:

General Maintenance of Polyester & Wool Garments.

• Follow all care instructions indicated on the label sewn into every gar ment.

• Brush your uniform regularly to remove surface dirt.

• When wet, don’t dry uniform in direct sun or near severe heat.

• When not in use, hang your uniform coat and slacks on wooden hangers. Slacks should be hung at full length by the cuffs.

• Avoid carrying pointed, sharp or heavy objects in the pockets.

• Have more than one uniform and alternate wearing. This will substantially extend the life of your uniform.

The Problem of Perspiration: Perspiration can have a harmful effect on fabrics. It can result in a loss of fabric strength. To prevent this from developing, the following precautions should be taken.

-Dry cleaning solvents do not remove perspiration from a fabric. Affected areas should be called to the attention of your dry cleaner, they will flush them with moisture from a steam spotting gun prior to dry cleaning.

-Although worsted and worsted blend fabrics may not be laundered, a perspiration affected area may be placed over a towel and blotted with a damp sponge. The area should then be blotted vigorously between two dry towels, and set to air dry.

What to do about spots and stains:

The following are simple procedures for removing or reducing common stains from uniform fabrics by using common household items:

Chemicals and materials needed: Rubbing Alcohol - Sponge - Naptha: Blotter Paper - White Vinegar - White Petroleum Jelly - Glycerin - AmmoniaStarch -Detergent -Soft Toothbrush

Type of stain: Solution

Butter, Cooking Oil, Blood: Sponge and flush with Naptha, feather out and dry. Sponge with water, dry; sponge and flush with naptha, feather out and dry. Coffee, Tea, Ketchup: Sponge with water, and soak stain with glycerin. Flush well with water, feather out and dry.

Glue: Sponge with water, loosen with brush, flush with water, feather out and dry.

Iodine: Sponge with rubbing alcohol against blotter paper, feather out and dry. Mayonnaise: Apply starch/naptha paste, dry and brush off excess. Sponge and flush with naptha, feather out and dry.

Motor Oil, Tar: Apply starch/naptha paste, dry and brush off excess. Sponge and flush with naptha, feather out and dry.

Mustard: Apply dry starch, brush to remove excess. Apply glycerin for 30 minutes, flush well with water, feather out and dry. Mud/Rust: Dry and brush off excess, sponge with water. Loosen with brush, flush with water, feather out and dry. Repeat with vinegar if necessary. Ink, Ballpoint: Rub white petroleum jelly into stain. Then soak in detergent solution and launder.

Tree Sap: Mix a small amount of ammonia with water and gently rub into the spot. After a spot has dried, have garment cleaned. Grass Stains: Rub detergent or pressure wash directly into stain. Clean promptly.

NOTES: Most chemicals listed above for spot removal are flammable and should be used in a well ventilated area free of any open flame. After treatment, air dry. Never dry in a tumble dryer.

All work should be done with a clean blotter underneath the stain area. Feathering out prevents ringing and is done by starting outside the stain area, and lightly brushing towards its center.

These care procedures are provided only as a service and should not be interpreted as a warranty, implied or otherwise.

Poly/Cotton and Poly/Rayon Permanent Press Garments:

• Machine wash garments in warm water (DO NOT USE BLEACH), tumble dry (on a permanent press setting), remove promptly. Hang up so that wrinkles will fall out. Touch up using a warm iron.

• Follow care instructions shown on every garment.

• For stains, spray a prewash on soiled area and then wash as instructed above.

• Dry clean periodically to sharpen creases.

• Do not use fabric softeners.

CARE OF ITEMS:

Follow care instructions indicated on the care label sewn in every garment.

WEAR LIFE:

100% cotton garments have approximately half the wear life of Polyester, and Poly blend garments. 100% Cotton garments are not acid resistant and color loss is accelerated.

ADDITIONAL SIZE INFORMATION:

If additional size information is needed on any garments, please call a HTC - APHIS Customer Support Specialist at 1-877-482-2260, or refer to any special ordering instructions.

Need to make a return?

Please try on your new garment to check the fit before laundering. We’re sorry but we cannot accept garments for return that have been personally altered, laundered, worn or otherwise made unsalable unless the garment is defective in workmanship or materials.

Please note any pants ordered with an inseam length of 28” or less are considered Special Cuts and are non-returnable.

Request an RMA number

• Please notify HT Customer Service regarding any discrepancies with your order within 7 calendar days of receipt.

• RMA numbers must be requested within 30 days of item receipt.

• Returns must be shipped to Human Technologies within 30 days of receiving your RMA number.

• RMA numbers may be requested year round, even when the web site is unavailable.

To help us process your Return, please request a Return Material Authorization (RMA) number. You can request an RMA number by:

• Calling our Customer Service department toll-free: 877-HTC-2260 (877-482-2260).

• Emailing our Customer Service department: customersvc@htcorp.net

An RMA number and Returns Form may be downloaded from the uniform site or we will email it to you. Please complete all fields on this form, especially the reason for the Return, as this helps us continually improve the products and services we provide to you.

We are not able to process your return and issue any allowance credit without an RMA number.

Package and ship your Return

1. Please return the item(s) in the same box you received them in, (when possible).

2. Place the completed Returns Form, and a copy of your Packing List, in the box.

3. Pack items in such a way to ensure they are not lost or damaged in transit. Seal the box well.

4. Write the RMA number on the top of the carton along with your name and address.

Please send Returns to this address: HT Distribution Center Attn: USDA-APHIS-IS Uniform Returns 2332 Bleecker St Utica, NY 13501

We recommend that your return be shipped via an insured carrier such as UPS or Fed-Ex which provide tracking information. If you return your garments through the US Post Office, you should insure the package so it can be traced.

Once we get your Return

Upon receipt and approval of a qualified return your allowance will be credited. Please allow 3 business days from receipt of your return for processing and allowance credit.

ABOUT US

Human Technologies, established in 1954 and headquartered in Utica, New York, has operations centers throughout New York, Pennsylvania, and Delaware. We are a 501c3 not-for-profit Social Enterprise, with a mission to create employment for people with disabilities, while operating as a self-sustaining business.

Our 300+ employees provide outstanding products and services in our five main lines of business:

3PL Supply Chain Services

Uniform Management Services

Manufacturing and Packaging Operations

Facilities Management Services

Environmental Services

We are proud to add USDA International Services to our growing customer list.

FEDERAL CUSTOMERS

• U.S. Department of Agriculture

• U.S. Air Force Air Force Security Forces Center

• U.S. Air Force Research Lab

• U.S. Defense Logistics Agency

• U.S. Department of State

• Naval Facilities Engineering Command

• U.S. Army Corps of Engineers

• U.S. General Services Administration

• U.S. Postal Service

NEW YORK STATE CUSTOMERS

• New York State Department of Corrections and Community Supervision

• New York State Department of Agriculture and Markets

• New York State Police Department

• New York City Police Department

• Nassau County Police Department

• New York State Department of Transportation

• New York State Department of Conservation

• State University of New York