
2 minute read
Products
Products products
DEI Titanium™ Turbo Shield/Blanket - GEN-3
Advertisement
DEI has raised the bar by producing the most technologically advanced turbo shield ever!
DEI drew on its extensive experience and state-of-the-art advanced textiles to produce the optimum in turbo heat management.
The DEI GEN-3 TITANIUM Turbo Shield boasts a silicone coated TITANIUM LR™ outer layer with multiple stainless steel and silica inner layers. This unique combination makes the GEN-3, without doubt, the strongest and most heat resistant shield available.
OUTER SHELL • Coated in silicone to insulate and hold up under extreme conditions. • Prevents fraying & encases seams make them over four times stronger.
INSULATION LAYER Thick layer of silica insulation keeps heat in the turbo shield and turbo housing. Silica has a low thermal conductivity making it one of the best insulators. INNER LAYER Stainless steel, glass fibre & silicone adds to insulating and thermal properties. Increases seam strength, durability and insulation value.
INNER COVER Stainless Steel fabric holds up against the highest temperatures. Will not break down or become brittle with heat. • Direct Heat Resistance: 1800°F (approx.980°C). • Radiant Heat Resistance: 2500°F (approx.1370°C).
RRP: £239.01 plus VAT (Subject to currency fluctuations) Available in UK, Europe and Japan from Demon Tweeks [www.demon-tweeks.com] For more information about this and other
DEI Heat and Sound control products visit: www.designengineering.com or e-mail sales@designengineering.com.
M-Style G Power SK 2 Superchargers for E90 E92 E93 M3
Looking for an instant power hike for the E9x M3?
Then look no further than the G Power range of SK2 superchargers from M-Style. These kits must be the easiest way to achieve massive gains in power and torque, without any internal engine modifications.
However, this upgrade goes much further than just giving an instant performance boost. The supercharger will deliver a linear pressure build up as the engine revs rise for a smoother power delivery. There is none of the lag associated with turbochargers and no alarming sudden onset of power. With the supercharger pressure and power builds steadily throughout the rev band. The more you need the more it gives, thus enabling safer overtaking and acceleration out of corners.
The kits come complete with everything required for the installation: • the ASA Compressor • Oil Supply Compressor • Drive Belt • Cast aluminium air intake duct and air box • Charge Air Recooling System • Performance air filter • Pneumatic boost pressure control and even the ECU re-programming by G Power.
Everything is totally reversible should you wish to sell the car and keep the supercharger and the factory OBD and diagnostic functions are retained.
M-Style has three levels of upgrade available starting with the Limited Edition 580 package that will, as its title suggests, boost power to 580bhp with 560Nm of torque at £4,995.00 inc. VAT.
Want more power? Try the 610 package with 610bhp and 580Nm at £6,495.00 or even the 640 kit with 640bhp and 595Nm at £7,595.00 inc. VAT. All the kits are relatively simple bolt-on conversions but if you’re not confident about installing them yourself M-Style is ready to help and perform the complete installation and ECU upgrade for £1,000 all in.
Make your M3 the car you always dreamed it should be by contacting M-Style today.
For further details e-mail info@mstyle.co.uk or call 0208 598 9115
