Precise DE – Need water storage? Think Vortex Bladders™

When you need water, you need water, and that’s where Vortex Water Bladders come in. At critical times water is like gold and our bladders provide a very cost effective and easy solution to storing water for when it is really needed.

At certain times of the year water is crucial to the sustainability, health, productivity and growth of plants, and the Vortex Bladder can help provide a very viable and affordable solution to achieving this. Whether you want to fill the bladder using roof water or from other sources these bladders are easy to connect into your current or future irrigation systems. Manufactured in France, Vortex bladders are used extensively around the world in the horticultural industry to store water, and are tried and proven in all climates and locations around the world.

What makes the Precise DE Water Bladders ideal for water storage? • Stored in a bladder, water is not subject to the amount of evaporation caused by the sun and wind as it would be in an open pond or tank. • Water is fully enclosed in a bladder, which keeps it clean and free from foreign matter, and from interference by birds and animals. • A bladder is a better option than an open pond from a health and safety point of view, and does not need to be fenced. • Bladders come in a wide range of sizes to suit your requirements. • Bladders can be relocated as required. Vortex Bladders are very easy to install. They can be packed up and stored or moved to another location, which is a big plus if they are not needed all year round. With a low profile they blend into their surroundings on your property, and can be easily landscaped in to minimise their visual impact. No building permits or consents are required when installing the bladders. All they need is a level 100mm sand base. Vortex Bladders are made of technical textile coated PVC with anti-UV treatment. They are assembled by high frequency welding which gives them great strength and resistance.

Vortex Bladders come with valves, reinforced corners, overflow fitting, a filling elbow, and an inspection hatch. All of these are pre-assembled in the factory to avoid any risk of leakage.

T: Allan 021 909 463 or Angus 027 498 3146 E: admin@precisede.co.nz