Options For Masonite Doors

DEDUCTIONS:

A. No casing

B. No sill

ADDITIONS:

6/8 JAMBS

A. 6-9/16" finger jointed and primed (incl. sill)

B. 4-9/16" white capped composite (we recommend using PVC casings)

C. 6-9/16" white capped composite (incl. sill) (we recommend using PVC casings)

D. Ripping of jamb to width other than 4-9/16" or 6-9/16"

E. 4-9/16" Endura Frame Saver (we recommend using PVC casings)

F. 6-9/16" Endura Frame Saver (incl. sill) (we recommend using PVC casings)

6/8 CASING

A. 5/4 x 4" (1-1/16" x 3-1/2") primed flat casing

B. PVC brickmould

C. PVC 5/4 x 3-1/2" flat casing

D. PVC brickmould with "J" channel

E. PVC 5/4 x 3-1/2" flat casing with "J" channel

F. Notch back PFJ Flat or 908 casing to accommodate 4-3/4" or 6-3/4" wall (choose 4-9/16 or 6-9/16 jamb for this option)

SILL

A. Endura Z-AC articulating sill with sill cover (aluminum finish) inswing

B. Endura Z-AC articulating sill with sill cover (bronze finish) inswing walnut grain cap

C. 4-9/16" outswing "Z" series bumper sill (aluminum) w/ brass non-removable pin hinge

D. D. 6-9/16" outswing "Z" series bumper sill (aluminum) w/ brass non-removable pin hinge

E. 1/2" Inswing ADAptive ADA handicap sill with thermal break mill finish

F. 1/2" Inswing tile back ADAptive ADA handicap sill with thermal break mill finish

G. 1/2" outswing ADAptive ADA handicap sill with thermal break mill finish

H. ADAptive ADA sills are also available in bronze finish at an additional charge

I. Endura Versapan flashing system 4-9/16" single, 40" - for wider units purchase multiple sets

J. Endura Versapan flashing system 6-9/16" single, 40" - for wider units purchase multiple sets

LABOR

A. Bore for dead bolt and strike prep jamb (prepped for Schlage deadbolt) 2-3/4" x 1-1/8" deadbolt strike prep

The ADAptive Sill System protects against door unit failure and resulting service calls with a patentpending design that achieves unprecedented water-rated performance.

Standard Unit Includes

DOOR JAMB 4-9/16" finger jointed and primed; jamb prepped for 2-1/4" 1/4 radius strike plate

DOOR TRIM 2" finger jointed and primed brickmould (WM180)

ALUMINUM SILL Endura Z-AC articulating sill for maximum performance with sill cover (aluminum finish)

ENDURA'S FORCE 5™ Guaranteed performance from Endura's powered by Endura system; single inswing with Z-AC sill is DP50

HINGES, 6/8 SPECS Brass color hinges; hinge locations 6-7/16", 37-5/8", 68-13/16", ball bearing standard on all inswing fiberglass doors

LOCKS, 6/8 SPECS Doors are bored with a 2-1/8" cylindrical hole with a 2-3/8" backset and a 1" x 2-1/4" edge bore, top of door to center of bore 43-11/16". Optional bore for deadbolt and strike prep jamb 2-3/4 x 1-1/8" (prepped for Schlage deadbolt) 5-1/2" on center.