HOME IMPROVEMENT AND REPAIRS TOOL AND GADGET ISSUE 2020

HOME CoverEDIT.qxp_Layout 1 9/20/20 11:46 AM Page 65

IMPROVEMENT AND REPAIR

HIR TOOL & GADGET

U.S. $7.95 CAN $9.95

EXPO

ISSUE: 5/6 HIRpub.com

THIS YEAR WE’RE BRINGING THE SHOW TO YOU! SINCE THE PANDEMIC CANCELED THE 2020 TOOL EXPOS, WE DECIDED TO CREATE ONE OF OUR OWN WITH THIS ISSUE CHOCK FULL OF COOL NEW PRODUCTS FOR PRO CRAFTSMEN AND DIY HOMEOWNERS ALIKE.

TM

Yellawood2FP.qxp_Layout 1 9/20/20 12:16 PM Page IFC1

Yellawood2FP.qxp_Layout 1 9/20/20 12:16 PM Page 1

LastDeck2FP.qxp_Layout 1 9/20/20 12:14 PM Page 2

Last-Deck

THE LAST DECK YOU WILL EVER NEED

LastDeck2FP.qxp_Layout 1 9/20/20 12:14 PM Page 3

last-deck requires no staining or sealing, just mild soap and

last-deck 300 series The 300 series is a patented,

water for cleaning. No warping,

watertight product that has the

splitting, cracking, rotting, molding,

ability to be replaced without having

lightweight and fire-resistant. Last-

to start at one end. Should you

Deck is available in a multitude of

receive damage at the mid-way point

options allowing you to design your

of your deck, simply pop up 2 joiner

own luxury outdoor space.

strips, replace the bad plank, snap

Manufactured in the Midwest of all American made structural-

the joiner strips back down, and your repairs are finished!

grade aluminum – the same as an aircraft; Last-Deck is built with high quality standards from our family to yours.

300 series easily pop up and snap back down!

pat# 9,803,376

www.lastdeck.com information@lastdeck.com toll free: 866-527-8332

EdLetter EDIT.qxp_Layout 1 9/20/20 1:47 PM Page 4

LETTER FROM MATT WEBER

This has been a year for change, whether any of us like it or not. We're all learning how to roll with the punches. The HIR team, for example, is accustomed to traveling to the National Hardware Show each year. Typically held in Las Vegas, Nevada, The NHS is an enormous trade show where tool

THE 2020 NATIONAL HARDWARE SHOW HAS BEEN CANCELED DUE TO THE PANDEMIC. WHAT A BUMMER. PUBLISHER JEREMY HOLLINGSWORTH jeremy@HIRpub.com EDITOR-IN-CHIEF MATT WEBER matt@HIRpub.com

and equipment companies unveil the new products that will soon stock the aisles of your local hardware store. We've attended the convention each year for the last decade to check out more than 250,000 hardware, tool, and lawn/garden products collected in one place. And we have traditionally published a magazine issue that previews many of the cool new products.

The 2020 National Hardware Show has been canceled due to the pandemic. What a bummer. We'll have to miss our annual trip, which was always fun and informative, and we won't be able to offer a true National Hardware Show Preview, which has always been a popular feature for our readers. Let's face it, if you're reading Home Improvement and Repair magazine, you're probably interested in new tools and gadgets.

We understand. You're not the only ones who peruse the aisles of the

ADVISORY BOARD JEFF WINKLE CHIP LOVELADY JIM BUTTERS KATHY ZIPRIK MARK CLEMENT ROB ROBILLARD LARRY CLEMENT

home center for new items that you might not need right now--but that you might need one day.

For folks like us, a roundup of new and upcoming tools is like a toy catalog for kids. We love to put them together, and our subscribers love to read them.

And, we don't want to deprive you, despite the cancellation of this year's convention. So, although we're breaking with tradition, we're also determined to make the best of the situation and offer this special issue--our own "HIR Tool & Gadget Expo"--a collection of new products which is even bigger and "badder" than our annual NHS preview.

I think you'll have fun with it.

EDITORIAL CONTRIBUTERS CARTER SWIFT TOM MATHEWS COPY EDITOR DIANE WEBER

CREATIVE DIRECTOR WESLEY GLASSCO wesley@HIRpub.com

AD DESIGN/COORDINATION SPECIALIZED MEDIA SERVICES, INC. ads@HIRpub.com PRODUCTION MANAGER SHANNA QUIGLEY ONLINE/SOCIAL MEDIA DEVELOPMENT GLORIA BERRIO

Home Improvement & Repair is published by Pine Mountain Media Group LLC, 130 Inverness Plaza, Suite 226, Birmingham, AL 35242. All rights reserved. Neither this publication nor any part of it may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without permission. The editorial content is intended to explain and simplify home-improvement tasks. Tools, products, materials, techniques, building codes and local regulations change. We assume no liability for omissions, errors or the outcome of any project. The reader must always exercise reasonable caution, follow current codes and regulations that may apply, and is urged to consult with a licensed professional if in doubt about any procedures.

PINE MOUNTAIN MEDIA GROUP LLC

04

Home Improvement and Repair | The Tool & Gadget Issue

U2fp.qxp_Layout 1 9/20/20 1:46 PM Page 5

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:29 AM Page 6

HIR TOOL & GADGET

EXPO

TOOLS & GADGETS GALORE! SINCE THE PANDEMIC CANCELED THE 2020 TOOL EXPOS, WE BRING YOU ONE OF OUR OWN. Compiled By Tom Mathews

If you’re reading Home Improvement and Repair magazine, you’re probably a big fan of tools and home-improvement gadgets. You’re probably the type of person who browses the aisles of the hardware store or home center to see what’s new, even when you don’t have a pressing need for anything. A tool catalog to you is like a toy catalog to a kid.

We understand. We think the same way. And we think you’ll have fun with this roundup of some of the latest and greatest tools and supplies to hit the market.

06

Home Improvement and Repair | The Tool & Gadget Issue

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:30 AM Page 7

AIRSHIM PRO XL

The AirSHIM Pro XL is an inflatable pry bar and leveling tool that enables an individual worker to move, adjust or support objects up to 500 lbs. with accuracy. Designed to help level windows, doors, cabinets and appliances, the AirSHIM Pro XL is a contractorgrade inflatable air wedge that replaces pry bars, wooden shims and other lifting or adjusting tools.

The AirShim’s rugged skin and internal stiffener enables you to cram it into tight spaces and use its air bulb to pump it up to shift and align objects. You can pump it up to the spot you want it or use the bleeder valve to lower an item for complete control. The AirSHIM Pro XL can be wedged into a gap as small as 3/32 inch and expand up to 3 inches to adjust items. Its 5-1/4-by-10-3/4-in. design stabilizes its load, and the lifting surface limits folding or wrapping around heavy narrow edges. It also has rounded corners to avoid scuffs and damage to the work surface like a jack, shim or pry bar can do.

You can even use it to pry objects apart like fragile baseboards and trim from a wall without damage.

CALCULATED.COM

KOBALT 24V XTR BRUSHLESS 1/2-IN. HAMMER-DRILL

For tough work in concrete and masonry, the new brushless 24V Kobalt 1/2-in. hammer-drill delivers 650 inch/pounds of torque. Its brushless motor delivers up to 26,000-BPM and provides 10 times the motor life and 3.6 times the run time as a brushed motor. The drill has a 2-speed gearbox, 24-position clutch, and a variable-speed trigger (0 to 2,000-RPM) for complete control when working in a variety of materials. Lightweight at only 3 lbs., the new hammer-drill works with all Kobalt 24V Max lithium-ion batteries. Features include a keyless chuck, built-in LED task light, attachable side handle, and a hard carrying case. Plus, it’s backed

by Kobalt’s 5-year limited warranty. The HIR staff has been using this rock-solid new drill around the workshop and jobsite lately. It has a slick-looking design and makes short work of drilling pilot holes for all sorts of concrete fasteners.

LOWES.COM

Read our magazine online at HIRpub.digital

HIRpub.com | Home Improvement and Repair

07

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:30 AM Page 8

HIR TOOL & GADGET

EXPO

QPR FAST-SETTING ASPHALT PAVEMENT REPAIR

QPR Fast-Setting Asphalt Pavement Repair features a proprietary water-activated technology that makes rigid repairs to asphalt or concrete easy, fast and permanent. Ready-to-use out of 20-lb. buckets, QPR Fast-Setting Asphalt Pavement Repair is appropriate for any pothole or crack wider than one inch. After removing all debris, pour the QPR Fast-Setting Asphalt Pavement Repair into the pothole or crack, spread evenly with a rake, and then activate the material by saturating with water. Once the product stops absorbing the water, firmly pack with a tamper. The patch will set hard in one hour, but traffic can return to the surface almost immediately after the repair is completed. QPR Fast-Setting Asphalt Pavement Repair requires no bonding agent and can be used in all weather conditions.

QPRUSA.COM

ROCKLER DRILL GUIDE

Rockler’s new heavy-duty drill guide combines the control and precision of a stationary drill press with the portability of a handheld drill. At 14-1/2-in. tall, the robust drill guide features steel guide posts and a beefy aluminum chuck carriage to maintain alignment for smooth, accurate drilling. While other guides typically have 3/8-in. chucks, the smooth ball-bearing chuck on the Rockler Drill Guide fits bit shanks up to 1/2-in. in diameter. It offers more than 8-in. spindle travel for deep drilling, and the large passthrough opening in the sturdy base allows drilling workpieces of virtually any length. The drill chuck features a 1/4-in. hex shank at the other end that works with quick-change chucks. The guide also features a depth stop as well as V-shaped supports in the base that center dowels and other round stock under the bit.

ROCKLER.COM

08

Home Improvement and Repair | The Tool & Gadget Issue

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:30 AM Page 9

AUTOMATIC DOOR BOTTOMS

Automatic Door Bottoms, often used for commercial applications, are increasingly being specified for residential doors. An Automatic Door Bottom utilizes a flat spring mechanism which activates when closing the door, lowering a neoprene seal insert against the floor or threshold.

The frame compresses a protruding hinge-side “plunger” as the door closes, activating the spring. The Automatic Door Bottom then drops a seal in a scissor-like motion from the hinge side, adjusting to the floor from a pivoting point. As the neoprene seal compresses, it forms a tight, secure seal against the floor.

The sweep retracts automatically as the door opens. Automatic Door Bottoms can be made to fit any sized door up to 48 inches and are available as surface-mounted units for easy retrofits, as well as mortised and semi-mortised versions.

ACOUSTICALSOLUTIONS.COM

TITEBOND PVC TRIM ADHESIVE AND SEALANT

For installation of synthetic trim, here are two products in one handy formula. Titebond PVC trim Adhesive and Sealant offers an all-in-one high-performance adhesive and sealant ideal for PVC trim, moulding, deck railing, and beadboard installation and repair. PVC Trim Adhesive and Sealant easily adheres to and seals a wide variety of materials in any condition: hot or cold, wet or dry. It provides a flexible, durable bond and a weather-tight seal. It’s paintable, weatherproof and UV-resistant. PVC is more flexible than wood, so the product used to adhere and seal it must also be flexible. PVC Trim Adhesive and Sealant will flex with the PVC, not against it, with 50-percent joint movement. Simply put, it sticks, stays and flexes in any weather.

TITEBOND.COM

Read our magazine online at HIRpub.digital

HIRpub.com | Home Improvement and Repair

09

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:30 AM Page 10

HIR

U2 FASTENERS WITH U-BITS

TOOL & GADGET

EXPO

WATCH AND LEARN

Click the video image if you are reading our digital magazine at HIRpub.digital.

10

Home Improvement and Repair | The Tool & Gadget Issue

Skilled tradesmen know every aspect of their work, right down to small details such as fastener selection— details that inexperienced DIY’ers might take for granted. Whether you’re a pro or DIY’er, your choice of fasteners won’t only determine how securely your project holds together, but it will also determine how quickly and successfully it gets completed. Anyone who works in construction knows the pitfalls of dealing with a stripped or broken screw and the time wasted extracting the broken fastener. Dropped fasteners are another headache, especially when working atop a ladder or trying to angle a screw into a hardto-reach spot. Enter U2 Fasteners, which are engineered to address all these problems. U2 Fasteners feature a Tight Star Recess system designed to grasp the matching Star-drive U-Bits so tightly that they can be installed with one hand. Simply pre-load the fastener onto the appropriately sized U-Bit, and it will stay there while you move the tool into place. No more dropped fasteners. Plus, the tight fit and strength of the screw heads mean U2 Fasteners will not strip or cam out. U2 Fasteners has a broad range of products including Fine Screws for trim carpentry, Construction Screws (structural fasteners that are replacing lag screws), and the Universal Screw, which is like a “deck screw on steroids.”

U2FASTENERS.COM

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:30 AM Page 11

HYDE DUAL HEAD SPRAY TIP EXTENSION

Spray twice as fast with better results. The airless Hyde 28760 Dual Head Spray Tip Extension has two tips spaced 6 inches apart that deliver a spray fan that’s twice the width of an average spray gun or single-tip extension. Because the tips are offset, the second tip follows behind the first, creating a “perfect pass” with a feathered overlap. The result is much greater speed and better first-pass coverage. For use with all .47-GPM or larger pumps, the new extension fits all “G” thread spray guns and uses 5 and 6 series tips. It is constructed of aircraft aluminum and is lightweight, durable and easy to clean.

HYDETOOLS.COM

BESSEY EHK SERIES ONE HAND CLAMPS

Bessey is adding a complete range of new one-hand clamps with the EHK Series. The new EHK Trigger Clamps have been engineered from the start to offer a clean design, comfortable handles, up to 600 pounds of potential clamping force, and the ability to quickly transform from clamping to spreading without using tools. All that is required is a quick push of the locking mechanism to disengage the fixed jaw, move it to the opposite end of the rail and re-engage. The EHK Series is ideal for the homeowner or professional craftsperson seeking a range of clamping options that are ergonomically designed, well engineered and competitively priced.

BESSEYTOOLS.COM

Read our magazine online at HIRpub.digital

HIRpub.com | Home Improvement and Repair

11

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:30 AM Page 12

HIR TOOL & GADGET

EXPO

SUMMIT TICK & FLEA SPRAY

Tick populations are on the rise, and ticks are carrying more diseases than ever before. Summit Tick & Flea Spray is a new permethrin spray that effectively kills ticks. Permethrin is a superior product for tick control because it provides a quick kill of existing tick populations and continues to kill and repel ticks for up to four weeks. To control ticks, spray Summit Tick & Flea Spray around the perimeter of lawn areas, under porches, and in grassy or bushy areas near the house. Ivy and shrubbery up to a height of 2-3 feet should also be sprayed. Ticks are attracted to dogs, so spray the areas in the yard where dogs travel or spend time. Summit Tick & Flea Spray is available in a handy hose-end spray bottle and as a concentrate that can be mixed with water and applied with a pump sprayer. A half-gallon bottle of concentrate makes 50 gallons of ready-to-use spray.

SUMMITRESPONSIBLESOLUTIONS.COM.

12

Home Improvement and Repair | The Tool & Gadget Issue

PEEL-TEK LIQUID MASKING

Peel-Tek’s patented technology allows multiple uses, including masking, surface protection and creative designing.

Peel-Tek is the only liquid paint-masking product on the market that effectively bridges the gap in masking rough, porous, highly textured surfaces. Where traditional masking products fail to adhere or allow seepage on highly textured surfaces, Peel-Tek outperforms by forming a contour-hugging, skin-tight protective barrier that prevents paint seepage and bleeding while peeling away cleanly, leaving no residue behind. Peel-Tek can be used for creating custom designs for stained concrete without fear of damage to the finish. It can be left on interior surfaces for weeks at a time and still peel away cleanly. Combining Peel-Tek Liquid Masking with masking paper or plastic allows you to mask large areas, saving you time and money, and cleanup is quick and easy.

PEEL-TEK.COM

SureDriveFP.qxp_Layout 1 9/28/20 11:23 AM Page 13

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:30 AM Page 14

HIR TOOL & GADGET

EXPO

T-REX TAPE BRUTE FORCE

Built with Forge-Link Technology, T-Rex Brute Force tape features an extreme tensile cloth that enables one loop to hold more than 700 lbs. of weight, which makes it the strongest duct tape on the market. Brute Force is too tough to tear by hand (must be cut) and features an aggressive double-thick adhesive with a durable waterproof backing, so you can secure, fasten or hold all sorts of materials for any project, on any jobsite.

TREXTAPE.COM

14

Home Improvement and Repair | The Tool & Gadget Issue

BRINK’S HANDS-FREE DOOR HARDWARE

Brink’s Push Pull Rotate (“PPR”) door handles, knobs and levers are easy-to-install doorknob replacements that allow hands-free access with a push of your elbow or bump with your hip. Stay clear of frequently touched knobs, levers and handles that are classified by the CDC as “high-touch” surfaces that could pose an inherent risk. Paired with a connected lock with geolocation abilities (like the Array By Hampton Connected Deadbolt), users can enhance the handsfree capability so the deadbolt unlocks as they approach, hip-checking to enter. After they’re inside, the deadbolt can then be locked via voice command using Amazon Alexa, Google Assistant or Siri.

The Push Pull Rotate knobs and levers can also be opened traditionally by turning or rotating, and in two new ways: Simply push in or pull out on the knob or lever to release the door latch.

WWW.BRINKSPPR.COM

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:30 AM Page 15

CREATIVE CLEANOUT COVERS

Creative Cleanout Covers are the world's first designer cleanout covers designed for homeowners and businesses looking to add a decorative touch to the standard chrome cleanout.

This premier line of decorative cover products currently offers five designs with five finishes. Colors include beechnut bronze, seaside silver, glamour gold, newport copper, and paint-grade white (paintable).

Made from injection-molded ABS plastic, the covers snap into place using a patented rare earth magnet. Designed for indoor and outdoor use, applications include residential and commercial retrofit or new construction.

CREATIVECLEANOUTCOVERS.COM

Read our magazine online at HIRpub.digital

PEACE BY HAMPTON SMART LED LIGHTING AND OUTLETS

Available exclusively through Best Buy, the new Peace By Hampton brand Wi-Ficonnected LED Lighting and SingleOutlet Smart Plugs allow users to add smart devices that are controlled by app, voice assistants, or both, without the need to purchase hubs, bridges or other networking hardware. With secure hosting on U.S. cloud servers, the Peace By Hampton smart LED bulbs enable users to highly customize their home lighting (indoor bulbs, flood lights, etc.) to create scenes, adjust light levels and colors, and control it all through the free home-security app for iOS and Android, as well as through Alexa, Google Assistant and Siri voice commands. New Peace By Hampton Smart Plugs enable users to easily add non-connected electrical devices into their smart home environment.

BESTBUY.COM

HIRpub.com | Home Improvement and Repair

15

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:30 AM Page 16

HIR TOOL & GADGET

EXPO

WERNER ADJUSTABLE PRO WORK PLATFORM

Werner introduces the new Aluminum Adjustable Pro Work Platform, which provides up to a 9-ft. reach and has 10 inches of height adjustability on both sides, making it easier for professionals to work on uneven surfaces and along stairways. With a 300-lb. load capacity, the compact, lightweight aluminum platform supplies users with a large 46-by-14-in. work surface that is easy to carry and maneuver on the job. It can be configured to 10 different height positions with one-handed adjustment and locking. Protective bumpers help shield contact surfaces from damage, and metal pins on the dual locking legs ensure long-term durability. The platform easily fits in smaller vehicles, taking up minimal space.

WERNERLADDER.COM

APEX U-GUARD TOOLS

The Crescent APEX u-GUARD series of non-marring covered tools gives protection and control on the jobsite. These patented tools allow the user to grab directly onto the drive tool while the bit spins freely inside the covers, increasing fastening control and reducing contact from the rotating tool. The u-GUARD line includes bits, bit holders and nut-setters, and is now available individually or packaged in the rugged Crescent APEX alphaCASE bit storage case. Working near finished paint, cabinetry, door frames, light fixtures or other final finishes is always a risk, because one slip with a traditional bit can scratch or mar the finish. The u-GUARD non-marring cover protects from scratching and damage, and the thin wall maximizes access for tight spaces.

CRESCENTTOOL.COM

16

Home Improvement and Repair | The Tool & Gadget Issue

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:30 AM Page 17

KREG DRAWER SLIDE JIG

Whether you’re a hobby woodworker or professional carpenter, the Drawer Slide Jig from Kreg Tool takes the guesswork out of installing drawer slides. This easy-to use jig holds slides in position as you drill mounting holes in the cabinet, and it supports drawer boxes while mounting slides to the drawer. Plus, the jig works with ball-bearing, epoxy-coated, and undermount slides for perfect positioning every time.

The Drawer Slide Jig simplifies installation by aligning slides in the cabinet and on the drawer.

Built-in tabs make the jig easy to align to support the slide inside the cabinet, and to support the drawers as you attach the slides to them. The slides have to be level, straight, and positioned properly, or the drawers won’t operate well. The Drawer Slide Jig simplifies this by indexing with the cabinet frame (or side on frameless cabinets) for perfect alignment.

KREGTOOL.COM

WOODPECKERS STEEL CLAMPING SQUARES

Simplify your project assembly process with the new Woodpeckers Steel Clamping Squares. These new Clamping Squares differ from the rest by incorporating a reinforcing brace running between the two legs. A computerized welding system holds the squares perfectly perpendicular while permanently welding the brace.

This product has an estimated ship date November 30, 2020.

WOODPECK.COM

Read our magazine online at HIRpub.digital

HIRpub.com | Home Improvement and Repair

17

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:30 AM Page 18

HIR TOOL & GADGET

EXPO

MILWAUKEE TOOL OSCILLATING MULTI-TOOL BLADES

Milwaukee Tool continues to enhance their line of unique cutting solutions with the introduction of Oscillating Multi-Tool Blades.

For use in wood, screws, nails, cement board, plaster and other cutting applications, the Titanium Enhanced Carbide Teeth Extreme Materials Blade features a thinner blade and unique aggressive tooth design to offer faster cutting performance in wood when compared to a standard carbide blade. Available in a 1-3/8-in. width, the Extreme Materials Blade lasts up to 50x longer than standard bi-metal blades and can be used in a wide range of materials. Also available are Milwaukee’s Titanium Enhanced Bi-Metal Metal Cutting Blades, made from premium high-speed steel and featuring a uniquely designed combination of tooth form and material to offer better cutting performance in soft metals, wood, nails, PVC and drywall. The blades are available in 1-1/8” and 1-3/4” widths. Joining the new multi-tool blade line-up are Milwaukee’s Japanese Tooth Hardwood Blades, HCS Wood Blades, and specialty accessories for sanding, scraping, grinding, and material-removal applications. The new Milwaukee blades are complete with a Universal Fit OPEN-LOK Connection for quick blade changes.

MILWAUKEETOOL.COM

DEWALT TOUGHSYSTEM 2.0 LAUNCHES WITH ACME TOOLS

The new DeWalt ToughSystem 2.0 is being launched exclusively with Acme Tools as the Industrial Channel partner online and in Acme Tools stores. The customizable and portable tool storage system has been upgraded to provide new patented auto-lock side latches, a removable handle to allow the rolling base to fit into a truck bed with a cover, and increased modularity that allows users to customize the system to meet their needs. ToughSystem 2.0 adds 20 percent more storage capacity and is compatible with most original ToughSystem 1.0 products. This exclusive launch of the new ToughSystem 2.0 features four case sizes and two different sized three-piece organizer sets from Acme Tools.

ACMETOOLS.COM

18

Home Improvement and Repair | The Tool & Gadget Issue

MuroFP.qxp_Layout 1 9/20/20 1:45 PM Page 19

• • • • •

Industrial strength tools, save time on every job Height adjustable handle, work standing up No pre-drilling required — even in Ipe Drive 1” to 3” screws, 150 screws per easy load coil Repeatable countersinking, set the depth and go

STAND UP TO THAT NEXT JOB...AND YOUR BACK AND KNEES WILL THANK YOU!

muro.com

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:31 AM Page 20

HIR TOOL & GADGET

EXPO

WORX 20V POWERSHARE 9” CORDLESS FAN

The Worx 20V PowerShare 9-in. Cordless Fan also features an A/C power cord to run the fan through an electrical outlet while charging the 20V Max lithium 2.0 Ah battery, or going entirely cordless. The two-speed fan operates at low (0-1500 RPM) and high (2500) speeds. Its air flow generates 310 and 450 cubic-feet-per-minute, which rivals some of the most powerful Worx leaf blowers.

When cordless, at low speed, the fan runs up to six hours, and up to two hours at high speed on a single charge, using the Worx 20V battery. The fan is mounted to a tubular style base and provides 360-deg, north/south rotation. Once positioned, locking knobs on either side of the base hold it in place. Set it on a shelf, workbench, table or freestanding on the floor to generate a refreshing breeze. The 8.5-lb. fan (with battery) can also be mounted to a wall.

WORX.COM

HI-VELOCITY HEATING AND AIR CONDITIONING SYSTEMS

Suitable for historic remodels, retrofits, new construction and more, the Hi-Velocity System is a Small Duct Central Heating & Air Conditioning System manufactured by Energy Saving Products Ltd. for more than 35 years. The new Cube Series Fan Coil is the latest product in the Hi-Velocity Systems air-handling equipment line. Using variable speed backward curved fan technology, this compact space heater/air conditioner has all the flexibility and superior air delivery of the Hi-Velocity Fan Coil. Available in two sizes, the Cube is multi-positional to suit any mechanical location. Perfect for apartments/condos, “tiny” homes, garages and workshops, or any space requiring additional heating, cooling or fresh air.

HI-VELOCITY.COM

20

Home Improvement and Repair | The Tool & Gadget Issue

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:31 AM Page 21

IMI MAGNETIC V-PAD CLAMPS FOR WELDERS

Industrial Magnetics, Inc. introduces Magnetic V-Pad Clamps for welders, a small, strong, and versatile magnetic clamp that offers quick setup and multiple holding positions on flat, angled or round steel stock. The V-Pads' dual, pivoting, magnetic heads can position and hold angles up to 180 degrees. Each V-pad contains four powerful magnets—two on its back, and one on each pivoting foot, giving the welder several options for holding configurations. Great for repetitive applications, they're easy to position and are available in two different sizes and holding strengths, sold in sets of two.

WWW.MAGNETICS.COM

Read our magazine online at HIRpub.digital

HIRpub.com | Home Improvement and Repair

21

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:31 AM Page 22

HIR TOOL & GADGET

EXPO

SCRIGIT SCRAPER

There are always small cleaning tasks around your house. You might need to remove accumulated dirt and grime from a corner, groove, wall edge, faucet base, or window track. You might need to remove spatters of latex paint, pieces of painter’s tape or adhesive product labels. To clean these areas, the Scrigit Scraper is a versatile penshaped tool providing a safe, quick and convenient way to remove small amounts of unwanted substances from household and automotive surfaces. The tool is two scrapers in one. A rounded tip simulates the scraping shape of a fingernail, which is great for small spots, cleaning curved surfaces, and removing adhesive labels, stickers and tape.

The flat-edged tip on the other end is best for getting into tight spaces and cleaning off unwanted materials from flat surfaces, edges, corners, and window and door tracks. Its small size makes the Scrigit Scraper practical to keep wherever it’s needed—a toolbox, pocket, vehicle, office or RV. It is made in the USA of a durable plastic that easily washes clean, won’t conduct electricity, and won’t scratch most surfaces.

SCRIGIT-SCRAPER.COM

AIRTHREDS REUSABLE FURNACE FILTERS

AirThreds are billed as the world’s first furnace filters that are machine washable and dryable. Simply pop it in the wash anytime you feel it’s dirty. Just unzip the cover and give it a wash and dry. Then put it back on the frame and re-use. According to the manufacturer, users will no longer have to replace their furnace filters. AirThreds’ patented filters are designed to strike a balance between airflow and particle capture, which is especially important for those suffering from asthma, allergies, colds or flu. Made of antimicrobial-treated fabric, AirThreds help prevent bacteria, mold and allergens that collect on air filters from blowing back into the home.

AIRTHREDS.COM

22

Home Improvement and Repair | The Tool & Gadget Issue

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:31 AM Page 23

WHISPER MAT LVT

Planning to install a floating floor? Whisper Mat LVT is a primerless, peel-and-stick sheet membrane, which reduces impact and airborne sound transmissions under luxury vinyl and laminate tiles and planks. Use it where soundcontrol is required, specified or desired. Constructed of a 100-percent virgin latex rubber sheet combined with an aggressive block copolymer adhesive, it is approved for use over completely cured concrete, interior plywood, cement backer-board and properly prepared OSB. Available in 30-in. by 80-ft. rolls, the Whisper Mat LVT is CRI Green Label Plus-certified for optimal indoor air quality.

PROTECTOWRAP.COM

THE MINI DRAGON

"Being Green" is nothing new to Flame Engineering, whose hand-held propane torches have been manufactured since 1959. Flaming is a simple process of exposing weeds to intense heat and vaporizing the water in the leaf cells. Just a split second of exposure to the heat is adequate to kill weeds, hence concern for the environment has popularized this simple and effective weed treatment. Flame Engineering’s newest product is the Mini Dragon, which provides portability and the perfect pinpoint flame for small jobs around the home and garden. Perfect for chemical-free spot weeding, lighting charcoal, chimineas, campfires and more, it’s designed for use with 14-oz. to 1-lb. propane cylinders. Also useful in the winter months to thaw ice, the Mini Dragon is safe and easy to operate, reduces herbicide use, and is proudly made in the USA. FLAMEENGINEERING.COM

Read our magazine online at HIRpub.digital

HIRpub.com | Home Improvement and Repair

23

Camo2FP.qxp_Layout 1 9/20/20 12:41 PM Page 24

Camo2FP.qxp_Layout 1 9/20/20 12:41 PM Page 25

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:31 AM Page 26

HIR TOOL & GADGET

EXPO

THE RESTORER

The new Restorer is able to accomplish a variety of tasks that typically require the use of many different hand tools and power tools. The Restorer is a patented hand-held or benchtop tool that can be used to buff, sand, grind, polish, scrub or clean any surface. Its design makes the Restorer very balanced and compact for maneuvering in tight areas and around tough obstacles in any type of surface, flat or curved, wet or dry. The Restorer can be fitted with any type of roller from sanding sleeves, abrasives to wire wheel and everywhere in between.

It is compatible with all Restorer accessories.

IAMARESTORER.COM

26

Home Improvement and Repair | The Tool & Gadget Issue

GELFIT STABILIZER KNEE PADS

The ToughBuilt GelFit Stabilizer Knee Pads allow the rock-steady Stabilizer SnapShell to be removed entirely or interchanged with other SnapShells, so users can create the exact knee pad to fit every job. The Stabilizer's unique construction creates a wide footprint to the front, sides and rear. This eliminates tipping-over, creates a stable, comfortable feel, and decreases pressure on the ankles. The ergonomic gel and foam design embraces the natural shape of the knee and upper shin, maximizing pressure distribution for all-day comfort.

WWW.TOUGHBUILT.COM

ToolSpectacularEDIT.qxp_Layout 1 9/27/20 10:40 PM Page 27

SPYDER NEW BI-METAL RECIPROCATING SAW BLADES

Spyder's new Black Series bi-metal reciprocating saw blades are designed for tough cutting tasks that require an aggressive, durable and long-life blade.

Constructed from an 8-percent cobalt blend, which adds strength and durability, they are up to three times faster and 10 times longer-lasting than standard bi-metal blades. Available in lengths of 6, 9 and 12 inches, and featuring 6 to 18 teeth-per-inch, Spyder's Black Series reciprocating saw blades excel in demanding demolition projects, quickly cutting wood, nail-embedded wood, metal and other materials. Threepiece and five-piece packs and a 14-piece variety kit with a storage case are available at Lowe's.

SPYDERPRODUCTS.COM

RE-U-ZIP +MAGNETIC

The HIR staff met the principles of this new company at the 2020 International Builders’ Show in Las Vegas. At the time, we thought Re-U-Zip’s magnetic self-closing strips offered a promising new upgrade for traditional dustbarrier systems. And we thought that before the Coronavirus pandemic had taken hold in the U.S. In light of the last several months, the new system seems smarter than ever. Professionals ranging from healthcare workers and dentists to tradesmen and construction workers are looking for solutions that can protect individuals from contamination, therefore protecting their health.

Re-U-Zip’s self-closing strips not only allow for hands-free entry, but they work with any customsized barrier. Irregular architecture, small or extra-large doorways, and even the lack of door frames will not stop Re-U-Zip +Magnetic from creating self-closing barriers for your workspace.

REUZIP.COM

Read our magazine online at HIRpub.digital

HIRpub.com | Home Improvement and Repair

27

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:31 AM Page 28

HIR TOOL & GADGET

EXPO

WILTON TRADESMAN XC VISE

Wilton expands the Tradesman XC Vise to include two new models with jaw widths of 4-1/2 and 5-1/2 inches. The smaller size vises are a result of customer demand to meet the needs of smaller spaces on work trucks. The Tradesman XC vises are designed to handle the elements with the ability to work in the most extreme environments.

Nicknamed the “bullet” due to its cylinder-shaped design, the Tradesman XC’s sealed construction features a precision slide bar, rugged jaw and pipe inserts, and a large, heavy-duty machined anvil. Key components are drenched with an electroless nickel coating to prolong life in corrosive environments.

WILTONTOOLS.COM

POWERMATIC PM2014 WOOD LATHE

The PM2014 wood lathe is touted as Powermatic’s most accessible lathe ever, bringing professionalgrade woodworking capabilities within reach of more woodworkers by featuring 115V single-phase power input, easy disassembly for transport, and an adjustable stand (optional). Additional features include a movable control box, digital speed and indexing readout, and anti-rotation tailstock key. The PM2014 is equipped with an inverter that converts 115V, single-phase power input to 230V, three-phase output, making industrial performance accessible wherever a standard 115V outlet is available. Consistent torque ensures that the wood turning does not slow down, even at low speed settings. The lathe handles a variety of projects from turning custom spindles and table legs to crafting bowls, vases and pens. The PM2014 is driven by a 1HP, 230V motor, capable of managing large or off-balance work pieces.

Electronic variable speed ranges include 15-900 RPM, 30-1800 RPM and 60-3600 RPM. Spindle speeds as low as 15 RPM with ample torque are ideal for creating intricate, ornamental turnings. The PM2014 lathe provides 20 inches working distance between centers and a 14-in. swing over the bed.

POWERMATIC.COM

28

Home Improvement and Repair | The Tool & Gadget Issue

GoddardFP.qxp_Layout 1 9/20/20 1:35 PM Page 29

Goddard Spiral Stairs • CUSTOM DESIGNED • HANDCRAFTED • BUILT TO YOUR SPECS!

T BUILHE IN T .A! U.S

At Goddard Manufacturing Co., we specialize in custom designed, handcrafted spiral staircases - built to your specifications. You can choose from several different styles of spiral staircases and our professional craftsmen can custom design a spiral staircase to fit almost any application.

Goddard Manufacturing Company PO Box 502, Logan KS 67646 Toll Free: 800-536-4341

www.spiral-staircases.com

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:31 AM Page 30

HIR TOOL & GADGET

EXPO

GATE ALL-IN-ONE VIDEO SMART LOCK

MILWAUKEE TOOL I-BEAM LEVELS

Milwaukee Tool is growing their layout solutions with the addition of three new Magnetic I-Beam Levels. Built to withstand tough jobsite conditions, the new levels are constructed with a stronger frame and feature integrated pitch vials. Each level features an all-metal frame while maintaining lightweight performance. The integrated pitch vial allows users to easily set 1º and 2º pitches for runoff applications. The vials are protected from impact damage, debris and fogging. Additionally, a strong magnetic edge provides a reliable hold to any ferrous surface for hands-free use. The new levels are made in the USA, come in 24-, 48- and 78-inch lengths, and are backed by a Limited Lifetime Warranty..

MILWAUKEETOOL.COM

Gate’s motion-activated camera streams real-time video to your smartphone, so you know who your visitors are at all times. Never worry about sharing or losing keys again, because Gate lets you assign and manage personalized PIN codes for people you trust to grant access without a key. With Gate’s two-way audio, you can welcome guests or give last-minute instructions to a service provider. Anytime the keypad is used, Gate sends you a text message. The system operates on a rechargeable lithium-ion battery, and installation is easy, requiring no drilling or wiring.

GO.GETGATE.COM/PRO

30

Home Improvement and Repair | The Tool & Gadget Issue

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:31 AM Page 31

ZENITH TRIM PULLER

The Zenith Trim Puller does all the work of a pry bar and claw without the damage. The Trim Puller is designed specifically to safely and easily remove baseboards, molding, door casings and decorative panels without damage to the trim or to the wall, and without the need for a shim or small board spacer. It has a larger, flatter and wider contact area than clumsy traditional tools and features an integrated wedged center that prevents damage to both the trim and wall. Ideal for repair and remodel projects where care and precision are needed, including cabinets, countertops, flooring and more. An impact-absorbing EDPM rubber handle provides increased user comfort, and the robust 48 Rockwell C heat-treated steel construction ensures its durability.

TRIMPULLER.COM

OMNITABLE

The OmniTable is a workbench, scaffold, dolly and floor creeper all in one. With its light weight (32 lbs.), large work surface of 37.

5-by-18.3 inches and 500-lb. load capacity, the OmniTable can easily accommodate large projects. Built-in features include a power strip, ruler/protractor, drill hole, steel hammer surface, in-line accessory storage and carry handle.

DISSTONTOOLS.COM

Read our magazine online at HIRpub.digital

HIRpub.com | Home Improvement and Repair

31

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:31 AM Page 32

HIR TOOL & GADGET

EXPO

CHANNELLOCK HD-1 ULTIMATE 4-PIECE PLIERS SET

The Channellock HD-1 Ultimate 4-Piece Pliers Set includes the brand's iconic 9.5-in. Tongue & Groove Pliers, 8-in. Long Nose Pliers, 7-in. XLT Diagonal Cutting Pliers, and 6-in. Slip Joint Pliers. Perfect for everyone from the DIY’er to the pro, this heavy-duty set is 100-percent made in the USA from high-carbon American steel for superior performance on the job. The gift set is available on Amazon for under $50—46 percent off MSRP— as well as at other online retailers and home-improvement centers.

CHANNELLOCK.COM

TITEBOND DURAMASTER

DuraMaster is the first elastomeric sealant with 100-percent joint movement. Most sealants only offer 25-percent joint movement (Class 25). DuraMaster is the first Class 100/50 water-based, elastomeric sealant, which means it’s four times better than any elastomeric on the market today; and that means four times more durability. Available in 13 colors, DuraMaster has excellent adhesion to virtually any building material: wood, concrete, metal, PVC, glass, stone, OSB, vinyl, masonry, aluminum and all types of siding. This high-performance, versatile sealant is capable of spanning gaps up to 2 inches wide. It stays flexible and is crack-proof, UV-resistant, paintable, VOC-compliant, and mold/mildewresistant. It’s easy to apply and tool, and cleans up easily with water.

WWW.TITEBOND.COM/DURAMASTER

32

Home Improvement and Repair | The Tool & Gadget Issue

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:32 AM Page 33

QUICK ROOF CLEAR PATCH

Quick Roof Clear Patch from Cofair Products is an effective patch for homes, RVs, marine vessels, trucks, camping gear, skylights, gutters and more. The incredibly strong adhesive will stop leaks instantly and sticks to almost everything. The Quick Roof Clear Patch is also UV-resistant for two years of direct sunlight.

COFAIR.COM

Essential Non-Scratch

YU

CK !

SCRAPER TOOL!

Available in 2-packs or 5-packs

Saves Time and Effort When Cleaning Small Surfaces, Edges & Grooves

OU

CH !

• Pen-shaped design easy to keep handy • Unique rounded tip – better scraper than a fingernail • Second flat-edged tip – won’t scratch like a screwdriver • Remove stickers, tape, caulk, putty, grime & more • Perfect for home improvement projects

Visit us at www.scrigit-scraper.com or purchase directly on Amazon Read our magazine online at HIRpub.digital

HIRpub.com | Home Improvement and Repair

33

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:32 AM Page 34

HIR TOOL & GADGET

EXPO

ROCKLER MITER GAUGE AND FENCE

Rockler offers a sturdy, easy-toset and highly precise miter gauge along with a telescoping aluminum fence that mounts to the new Rockler gauge or to other gauges on the market. The miter gauge has an aluminum head with an easy-to-read scale ranging from 0° to 70° in both directions, plus precision-machined positive stops at 0°, 15°, 22.5°, 30°, 45° and 60°. A spring-loaded stop locks into the notches that create the positive stops, and a machined hairline indicator makes it easy to set other angles. The gauge’s 18-in. steel miter bar works in standard and T-slot miter slots and features adjustable set screws for eliminating slop. As an accessory to the gauge, the backbone of the Rockler Miter Gauge Fence is a rigid 14-in. long aluminum extrusion and a matching 2-in. long telescoping extension that can be mounted on either side of the fence and adjusted for a total fence length of 16 to 24 inches. An included 3/4-by-18-in. long melaminecoated MDF face attaches to the extrusion with included hardware to provide zero-clearance support for cleaner cuts.

ROCKLER.COM

GARAGE GATOR STORAGE LIFTS

Garage Gator motorized lifts from Proslat install easily and maximize ceiling space in home garages. Once installed, all that’s needed is a click of a button to easily hoist large sporting equipment, Christmas trees, kayaks or other oversized items into a secure ceiling space. The motorized lifts make it easy to gain constant access to stored items without ladders or hassles. The lifts hold up to 220 lbs. and are available in several options that include a range of weight-bearing capacities and utilities.

GARAGEGATOR.COM

34

Home Improvement and Repair | The Tool & Gadget Issue

ToolSpectacularEDIT.qxp_Layout 1 9/27/20 10:41 PM Page 35

MATCHING TRENDLINE FINISHES ON DRAINS, SHELVES AND PROFILES

Porcelain tiles that reproduce the appearance of wood, concrete and natural stone are the surface covering of choice in many bathroom and shower projects. These natural tones, as well as black and white, continue to be the most frequently used and on-trend colors in tiles. To complement the look, Schluter-Systems’ TrendLine textured finishes are available on KERDI-Drain-Style shower-drain grates and the Schluter-SHELF shower shelves. Six different highly durable powder-coating finishes are available: matte black, matte white, stone grey, greige, cream and bronze. These elements can blend seamlessly with the rest of the installation, or create bold and striking accents within the shower area. The TrendLine series of finishes are available in the most popular profile shapes: flat, rounded, square, as well as DILEX cove profiles and FINEC Schluter-Profiles that protect tile edges from cracking and chipping.

SCHLUTER.COM

BRILLIANT SMART-HOME CONTROL FOR GENIE GARAGE DOORS

Brilliant and Genie Smart Garage Door Openers have teamed up.

Now, Genie’s full line of Wi-Fi enabled garage door openers powered by Aladdin Connect can be controlled from Brilliant’s in-wall touchscreen control panels and mobile app. Brilliant offers an affordable smart home control system that unifies all your favorite smart devices and makes them easier to use. Homeowners could already control lighting, locks, cameras, music, thermostats effortlessly by voice-enabled touchscreen controls on the walls or the all-in-one Brilliant app. Now, they can add garage doors to the list.

BRILLIANT.TECH GENIECOMPANY.COM

Read our magazine online at HIRpub.digital

HIRpub.com | Home Improvement and Repair

35

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:32 AM Page 36

HIR TOOL & GADGET

EXPO

B’LASTER PREMIUM MULTI-MAX LUBRICANT

B’laster Multi-Max Lubricant is now available with the new B’laster ProStraw.

It’s a premium multi-use lubricant that outperforms the leading competitor in six ASTM tests. It’s also fully synthetic, which means longer-lasting lubrication and higher performing results. The Multi-Max formula offers extreme protection against corrosion by reducing friction and wear, and it’s odorless, which makes it great for indoor projects. Use it on thousands of applications from door hinges and window tracks to lawn and garden equipment and chains and locks. The B’laster ProStraw with Control Flow Technology features a patented design with a dual-spray pattern, so you can flip the straw up for pinpoint accuracy or down for wide area, full coverage. It also features a volume adjuster that allows you to control the flow of product for each specific application.

BLASTERCORP.COM

36

Home Improvement and Repair | The Tool & Gadget Issue

DUST DEPUTY BAGGER

Oneida Air Systems introduces the Dust Deputy Bagger, which combines the patented Dust Deputy cyclone separator with an innovative wall-mounted bagging system that turns any wet/dry vacuum into a high-capacity, two-stage dust collection system, ideal for any workshop or garage where wet/dry vacuums are regularly used. Now 20-percent more efficient with Neutral Vane Technology, the cyclone removes over 99 percent of dust and debris from the airstream before it reaches the vacuum—virtually eliminating filter clogging and suction loss, and dramatically extending filter life. The Bagger’s unique design allows the use of standard 3-mil garbage bags in place of traditional dust collection bins. By using clear collection bags, it’s easy to see when the bag needs to be emptied, and the volume of waste collected is only limited by the bag size being used. When the bag is approximately two-thirds full, simply gather the neck of the bag together, remove it from the Bagger unit, and dispose of it.

No other system offers such a quick, easy and mess-free method of wet/dry vacuum waste disposal.

Made in the USA, the Dust Deputy Bagger sports a slim installed profile at approximately 12 in. wide, 12-in. deep, and 55 in. high with bag installed.

ONEIDA-AIR.COM

OutdoorFloorFP.qxp_Layout 1 9/20/20 1:41 PM Page 37

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:32 AM Page 38

HIR TOOL & GADGET

EXPO

CREATE-A-BED ADJUSTABLE MURPHY BED MECHANISM

The demand for Murphy beds is growing because living spaces are becoming smaller and more expensive, while the need for home offices and multi-purpose rooms is increasing. The Create-A-Bed Adjustable Murphy Bed Mechanism is a patented piston-lift system that comes with complete, step-by-step assembly instructions. The illustrated instruction booklets include cut sheets, bills of materials and templates to build a Murphy bed. Proudly made in the USA, this Murphy bed mechanism can be adjusted quickly and easily— even after a bed has been installed.

That means the builder or user can easily adjust a Murphy bed that’s too heavy or light. With old-fashioned metal spring hardware, adjusting a bed meant adding or removing bulky, hazardous metal springs. Now, thanks to Create-A-Bed’s patented gas spring mechanism, a murphy bed can be adjusted in seconds and is backed by a lifetime warranty.

CREATEABED.COM

PROSLAT PVC SLATWALL SYSTEM

Proslat’s PVC slatwall is a versatile garage storage solution that leaves room to park your car and store all your family's gear. The system is environmentally friendly, impervious to the unpredictable garage environment, easy to install and economically priced. There is no need for a professional installer because all the necessary trims and hardware are in the box. All you need is a stud finder, a saw and a drill. Built tough, Proslat’s panels are made from 90-percent recycled PVC which is not affected by mold or moisture. The panels support up to 75 lbs. per linear foot, and the hook cavity lets you hide any wiring.

The interlocking panels provide a sleek finish, and once your walls are up, you will be amazed how much you can store on Proslat's wide range of slatwall-mounted hooks, racks and cabinets.

PROSLAT.COM

38

Home Improvement and Repair | The Tool & Gadget Issue

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:32 AM Page 39

METABO HPT MULTIVOLT REBAR BENDER/CUTTER

Metabo HPT’s first dual-powered MultiVolt Rebar Bender/Cutter (model VB3616DA) makes quick cuts and bends to uniform angles.

It can bend approximately 520 pieces of #5 rebar at 90° on a single charge of the included MultiVolt 4.0Ah battery in under 2 seconds per bend. It can bend multiple pieces of rebar at one time (one piece of #5 rebar, two pieces of #4, or three pieces of #3) to save time and improve productivity. Dial into precise angles up to 180° for uniform bends with a simple turn of the color-coded angle adjustment dial. For custom angles, a quickreverse setting is a feature of the Manual Mode. When it comes to cuts, expect approximately 270 cuts of #5 rebar in a matter of seconds on a single charge of the battery. This tool also delivers one-of-a-kind cordless/corded dual-power convenience as part of the MultiVolt family of tools.

METABOHPTFREE.COM

SPOUTOFF OVERSIZED DOWNSPOUT OUTLETS

A common problem with rain gutters is clogging due to debris accumulation at the outlet to the downspout. To solve this problem, the oversized SpoutOff outlet is 3 to 4 times bigger than all other standard outlets. The larger passageway allows debris to wash through without clogging. Because The SpoutOff outlet will not clog, rain gutters will work every time it rains. Once installed, the SpoutOff Removable Downspout feature means no ladder or tools are needed to check the outlet— a tremendous selling feature.

Any homeowner can inspect any SpoutOff Outlet (1- to 3-storey homes) in less than a minute while standing safely down on the ground. The SpoutOff can also be retrofitted to most present rain gutters.

THESPOUTOFF.COM

Read our magazine online at HIRpub.digital

HIRpub.com | Home Improvement and Repair

39

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:32 AM Page 40

HIR TOOL & GADGET

EXPO

CHAMPION DUAL FUEL OPEN FRAME INVERTER

The Champion Power Equipment 4000-Watt Open Frame Inverter Generator is a portable dual fuel unit that can run on either gasoline or propane. If gas stations are unable to pump fuel, the generator can be connected to a standard barbecue propane tank. The fuel selector switch makes it easy to safely switch between fuel sources.

It has plenty of outlets for electrical cords and enough power to operate the essential items for the home, cottage or RV. The outlets include a 120V 30A RV, two 120V 20A household outlets and a 12V DC automotive-style outlet with a dual USB adapter and a battery-charging cable. This inverter generator provides power to operate important items like a fridge so food doesn’t spoil, or a sump pump so the basement doesn’t flood. It can also help keep your family comfortable and secure and be used to power some tools when outlets are not readily available or the power is out. The Quiet Technology digital components of this open frame unit cuts the noise level in half. Confidently connect sensitive electronics since this hybrid produces only Clean Power (less than 3% THD).

CHAMPIONPOWEREQUIPMENT.COM

A

New kind of Indoor Dryer Vent

Indoor lint trap for electric dryers • Does not require water • Clothes dry faster, saving time and energy • Double filter system captures lint and dust • Protects indoor air quality

www.adr-products.com • 888-609-5512

40

Home Improvement and Repair | The Tool & Gadget Issue

PermaChinkFP.qxp_Layout 1 9/20/20 1:42 PM Page 41

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:32 AM Page 42

HIR TOOL & GADGET

EXPO

42

DAP ECLIPSE RAPID WALL REPAIR PATCH

The DAP Eclipse Rapid Wall Repair Patch is a new solution for repairing drywall damage without spackling, allowing you to paint immediately for quick completion. No more waiting for spackling to dry or messy sanding. This all-in-one, mess-free solution not only provides a permanent, long-lasting wall patch but also superior impact resistance for areas that may see reoccurring impact, such as behind a door. The repair is 4X stronger than drywall itself with superior impact resistance. A 6-in. Eclipse patch can repair drywall damage up to 3 inches in diameter. It won't peel or lose adhesion over time DAP.COM

Home Improvement and Repair | The Tool & Gadget Issue

U2fp.qxp_Layout 1 9/20/20 1:48 PM Page 43

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:32 AM Page 44

HIR TOOL & GADGET

EXPO

DIABLO SPEEDEMON SELF FEED BITS

Diablo SPEEDemon Self Feed Bits are specifically designed for faster, more efficient drilling with cordless drills. Traditional selffeed bits are slow and not optimally designed for cordless drills; they pull too much power and quickly drain the drill’s battery.

Additionally, the feed-screw design on traditional self-feed bits makes them easy to lose or get stuck when pulling out the bit. The SPEEDemon Self Feed Bits have a precision heat-forged two-cutter head and a unique positive hook-angle tooth geometry, which means these forwardleaning teeth rip through soft wood up to two times faster than standard bits. The SPEEDemon Bits also feature a replaceable feed screw with a pull-out stop design that prevents it from slipping out when the bit is removed from the material.

DIABLOTOOLS.COM

FORNEY EASY WELD

The Forney Easy Weld 140 MP is designed to be a user-friendly, powerful and affordable multiprocess welder, ideal for DIY projects, maintenance, repair, metal fabrication and metal art. It can easily be switched between MIG, DC TIG and Stick welding, saving you time and frustration. The Forney Easy Weld 140 MultiProcess welder is small but mighty weighing only 25 lbs., but able to handle 2- and 10pound rolls of wire. This machine features infinite voltage and wirefeed speed controls to dial in the perfect setting every time. It works off standard household power, making it easy to bring the machine to your project rather than bringing the project to your machine. Each strike is easy, and no gas is needed to operate. This unit is versatile and easy to set up, designed to take the fear out of welding.

FORNEYIND.COM

44

Home Improvement and Repair | The Tool & Gadget Issue

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:33 AM Page 45

PONY JORGENSEN CUTTING RAIL GUIDE

The 50-inch Jorgensen cutting rail guide and 50-inch cutting guide extension rail allow for up to 100 inches of precise cutting. Made with heavy-duty rigid aluminum for long life and consistent straight edges, the 50-inch Jorgensen cutting rail guide clamps onto work surfaces and allows for accurate cuts up to 50 inches long. Featuring a handle-locking mechanism and built-in ruler, the new 97100 series is best suited for use with jigsaws, circular saws, routers, and other portable power tools. For workpieces longer than 50 inches, the 50-inch cutting guide extension rail, which is sold separately, can be easily attached to the cutting guide, doubling the length of the cut.

PONYJORGENSEN.COM

RUMBLESTONE KITS

Pavestone has made it easy, fast and affordable for homeowners and contractors alike to build a number of desirable outdoor features with the advent of RumbleStone.

These rustic-looking stones come in project kits that require nothing more than stacking stones in a predetermined configuration to create fire pits, grill enclosures and benches.

QUIKRETE Polyurethane Construction Adhesive can be applied between the stones to strengthen the finished project. Pavestone RumbleStone, which are available in kits starting at $250, can also be purchased as individual units for customized projects like patios, walls and landscape borders.

PAVESTONE.COM

Read our magazine online at HIRpub.digital

HIRpub.com | Home Improvement and Repair

45

ToolSpectacularEDIT.qxp_Layout 1 9/20/20 11:33 AM Page 46

HIR TOOL & GADGET

EXPO

46

[NOT REALLY A TOOL, BUT WE THINK IT’S COOL] SPIRAL STAIRCASE MADE TO ORDER

A spiral staircase is an eye-catching and space-saving design element, but they aren't easy to build. For a completely customized spiral staircase design, Goddard Manufacturing specializes in handcrafted staircases built to your specifications. Choose from several different styles of spiral stairs to fit almost any application, and the professional craftsmen at Goddard will try to create the design you want. Custom options include a wide range of designs in handrails, treads and decorative balusters.

These unique custom staircases are created using oak, hickory, steel and other materials for either interior or exterior applications. Personalize your spiral staircase with a variety of baluster styles, hardwood treads, all-steel treads, red oak handrails, all metal rails, or anything you can imagine in a spiral staircase. If you have an idea you don’t see advertised on the Goddard website, just ask the company reps who will work with you to create the custom stairs you want.

To get the most strength, cleanest lines and best-looking spiral stairs possible, the staircase will be welded into one solid structure and is usually shipped as one piece. (Wood spiral staircases are disassembled and boxed for shipping.) If the area is ready for the spiral stairs to be installed, two people can usually install it in less than an hour. The All Wood Spiral Staircase is shipped disassembled and takes four to six hours to reassemble.

Note that because these are custom-built stairs, you should allow 3 to 8 weeks for build time (depending on your design) and shipping.

SPIRAL-STAIRCASES.COM

Home Improvement and Repair | The Tool & Gadget Issue

CTAoutlastFP.qxp_Layout 1 9/20/20 6:44 PM Page 47

Titebond2FP.qxp_Layout 1 9/20/20 12:16 PM Page 48

Titebond2FP.qxp_Layout 1 9/20/20 12:16 PM Page IBC1

SummitFP.qxp_Layout 1 9/20/20 11:53 AM Page 1