• Practically pulsation-free for high surface quality
• Very low detergent consumption
• Applications up to 250 bar and 5 l/min
• For aggressive, abrasive or shear-sensitive materials
MANAGING DIRECTOR & ADVERTISEMENT DIRECTOR
Nigel Bean
t: +44 (0) 1442 826826
e: nigelbean1@aol.com nigelbean@surfaceworld.com
EDITOR & GRAPHIC DESIGNER
Jane Soones
e: janesoones@aol.com janesoones@surfaceworld.com
CIRCULATION & SUBSCRIPTION DEPARTMENT
t: +44 (0) 1442 826826
EXHIBITION ORGANISATION
t: +44 (0) 1442 826826
Hill Media Ltd, Marash House 2-5 Brook Street, Tring, Hertfordshire HP23 5ED, United Kingdom.
The Surface World magazine is published 12 times a year by Hill Media Ltd. Although every effort is made to ensure the accuracy and reliability of material published in Surface World, Hill Media Ltd and its agents accept no responsibility for the veracity of claims made by contributors, manufacturers or advertisers. Copyright in all material published in Surface World, including but not limited to all Hill Media brands, brand logos, trademarks, and associated assets, remains with Hill Media Ltd and its agents.
PRECISION CLEANING IN HIGH-SPECIFICATION MANUFACTURING V2. 2
INSTITUTE OF MATERIALS FINISHING
INDUSTRY RECOGNISED TRAINING COURSES FROM THE IMF. 6
QUALICOAT UK & IRELAND QUALICOAT UK & IRELAND TEAMS UP WITH AMS FOR ADVANCED TECHNICIAN
BRITISH COATINGS FEDERATION LTD
2026 ANNUAL CONFERENCE HIGHLIGHTS COLLABORATION
THE SUPPLY CHAIN TO TACKLE INDUSTRY CHALLENGES. 16
INDUSTRY NEWS
PRETREATMENT, SURFACE PREPARATION, DEGREASING & CLEANING 3M™ NOVEC™ PHASE-OUT: RUNNING LOW ON STOCK? ENVIROTECH EUROPE SUPPLY DIRECT REPLACEMENTS.
OVERHEAD CONVEYORS IN SURFACE FINISHING PLANTS.
PRECISION CLEANING IN HIGH-SPECIFICATION MANUFACTURING V2
In advanced manufacturing sectors such as precision optics, ophthalmics, medical devices and photonics, cleaning is no longer viewed as a secondary production process. It is a critical and measurable stage of manufacture that directly influences product performance, yield, compliance and reliability. As component tolerances become tighter and contamination limits increasingly stringent, manufacturers are under growing pressure to adopt cleaning technologies capable of delivering validated, repeatable and fully controlled results.
At Unitech Shyre, we continue to see a significant shift in customer expectations. Manufacturers are no longer seeking simply an ultrasonic cleaning machine; they require a process-engineered solution that integrates precision
cleaning, process validation and production traceability within a single controlled environment.
At Unitech Shyre, we strongly believe in synergy — a synergy between machine,
process and chemistry. Each element must work in complete harmony with the next in order to achieve optimum cleaning performance and repeatable results. Even the most advanced cleaning system will underperform if the chemistry is not correctly matched to the contamination profile, or if the process parameters are not precisely controlled. True precision cleaning can only be achieved when all three disciplines are engineered together as a unified solution.
This evolution is particularly evident within sectors such as ophthalmics and photonics, where microscopic contamination can directly affect optical transmission, coating adhesion and overall component performance. Likewise, within medical manufacturing, the regulatory emphasis on process consistency and documented validation has elevated cleaning from a maintenance function to a quality-critical manufacturing discipline.
Modern ultrasonic cleaning technology offers substantial advantages when designed correctly for precision applications. High-frequency ultrasonic systems enable the removal of particulate and microscopic contaminants from highly sensitive geometries without mechanical abrasion or surface damage. However, achieving consistently repeatable outcomes depends on far more than ultrasonic energy alone.
System design must incorporate tightly controlled parameters including ultrasonic frequency stability, filtration efficiency, temperature regulation, fluid management, dwell time and automated handling.
MACHINERY
WHAT DO WE DO?
We design and deliver fully bespoke industrial cleanroom installations, engineered to meet your exact operational requirements. Our expertise includes cleanrooms, spray booths, ovens, and servicing solutions tailored to the automotive industry.
Industrial Spray Equipment
Built with 65 years of design and engineering excellence.
Designed for precision, engineered for performance, Elcometer spray equipment is built to work harder, last longer and perform better.
Repeatability can only be achieved when each stage of the process is engineered to operate within defined and monitored tolerances.
Increasingly, manufacturers are also demanding evidence-based validation to support internal quality systems and external regulatory requirements. This includes documented cleaning protocols, process monitoring, batch traceability and performance verification. In many applications, cleaning systems are now expected to integrate directly into wider Industry 4.0 manufacturing environments, providing data capture and reporting capabilities that support audit compliance and continuous process improvement.
Automation also plays an increasingly important role. Manual intervention introduces variability, particularly in high-throughput or contaminationsensitive production environments. Automated ultrasonic cleaning platforms help eliminate operator dependency,
ensuring process consistency across multiple production cycles while improving throughput and reducing reject rates.
At Unitech Shyre, our approach has always focused on engineering systems around the application rather than supplying standardised equipment. Different substrates, contamination profiles and production environments demand different cleaning strategies. A photonics application may require ultra-fine particulate removal under tightly filtered conditions, while medical components may require validated multi-stage aqueous cleaning and controlled drying to meet compliance objectives.
As manufacturing technologies continue to advance, cleaning standards will only become more demanding. Precision cleaning is increasingly recognised as an enabling technology that supports product quality, operational efficiency and regulatory confidence. Manufacturers that
invest in validated, repeatable cleaning processes are not simply improving cleanliness; they are strengthening the reliability and competitiveness of their entire production operation.
For companies operating in highspecification industries, precision cleaning is no longer optional. It is an integral part of modern manufacturing quality assurance — and one that must be approached with the same technical discipline as every other critical production process.
Switchboard: 00 44 (0) 1543 224531
Mobile: 07807 413 486
Unit 1B | West Coppice Road | Brownhills West Midlands WS8 7HB
Email: david@unitechshyre.co.uk
Visit: unitechindustries.co.uk
www.unitechshyre.co.uk
01543
info@unitechshyre.co.uk
WAM Silotop
Airmaster
Donaldson Camfil Goldcone Air Filtration
Become an Acknowledged Leader in Surface Engineering and Materials Finishing: INDUSTRY RECOGNISED TRAINING COURSES FROM THE IMF
Are you involved with the application of coatings to enhance and protect your products? Do you need to meet client specifications to ensure the longevity of your components? Does the complex world of surface engineering and materials finishing cause you headaches?
If so, the courses offered by the Institute of Materials Finishing (IMF) could be your solution!
The IMF have been promoting knowledge in the surface finishing industries, both inorganic surface treatments including plating and the application of organic paints, lacquers and varnishes for many years. Large numbers of engineers and technicians across a multitude of industries have benefitted from the knowledge gained to enhance their careers, their standing within industry and the ability to problem solve the many challenges they face in their daily working lives!
Starting with the Foundation level course, students gain knowledge on all aspects of materials finishing, specifically aimed at their own industry requirements, but to include sections on Health & Safety, the Environment and Surface Finishing and Corrosion Protection. There is no need for a science background to be able to successfully complete a foundation course.
The Foundation Course requires study of 15 sections and requires the submission of 2 marked assignments followed by an end examination. The course, conducted by distance learning will take 16 weeks to complete. There are three specific study routes to choose from; electroplating, organic coatings and aerospace finishing. On successful completion, the student is awarded the Foundation Certificate.
To follow on, students can then elect to progress to the Technician level modules, which give more in-depth knowledge for key finishing technologies, their application and best practice methods. Again, both inorganic and organic technologies can be studied to match the industry requirements. There is a choice of eight modules, which provide study in applicable areas of surface finishing best matched to your needs.
Like the Foundation course, study is by distance learning, and the student is required to complete four marked assignments and pass an examination.
Passing two technician modules leads to the award of Technician Certificate; passing four modules leads to the award of an Advanced Technician Certificate.
If you feel your career could benefit from being a recognised specialist in your particular branch of Surface Engineering or Materials Finishing, then contact the IMF today.
Speak with our training manager Karen Yates on +44 (0)121 622 7287 or email karen@materialsfinishing.org.
Move your career to the next level and join the finishing community and all the benefits that gives through the IMF.
We're excited to introduce a recent addition to our portfolio: our new Cabinet Parts Washer.
Their fully Welded stainless Steel construction and Hygienic Design significantly reduces and minimises the need for extensive and time consuming cleaning operations.
The units are mobile, can be fitted with extraction fan or condensate unit (as shown) and feature a self-contained water storage tank and filter tank, which effectively removes gross debris and particulates before draining.
If you have similar requirements or are interested in exploring our range of equipment for the Food, Pharmaceutical, and Engineering sectors, please don't hesitate to reach out to us.
Metallic plate heat exchanger
• low space requirement
• high thermal and mechanical stability
• easy to clean
Coated plate heat exchanger
• custom-made dimensions
+44 / 1509 673 656
• for process liquids with strong acids
• anti-adhesive coating made of thermal conductive fluorpolymer
significant reduction in encrustations
Polymer heat exchanger
• different dimensions
• highest chemical resistance
• several planar layers of tube coils made of PFA large heat transfer surface to volume ratio high temperature- and pressure resistance
QUALICOAT UK & IRELAND TEAMS UP WITH AMS FOR ADVANCED TECHNICIAN TRAINING
Last month, technicians gathered at Architectural & Metal Systems (AMS) in Wallingstown, Co. Cork, for a hands-on QUALICOAT Advanced Technician training session to refresh their knowledge on aluminium coating and defect identification. As the QUALICOAT Specifications require all coaters to have at least one technician trained every two years, this session provided a vital local opportunity for Irish members to maintain the prestigious quality label.
Reflecting on the training event, Adam McCarthy, Laboratory and Installation Manager for AMS, said: “It was a privilege to host the Advanced Technician training on behalf of QUALICOAT UK & Ireland and a pleasure to have Oliver [Bögler, Head of Inspections at IFO Institute of Surface Technology] and Jim [Regan, Managing Director for EMEA at Q-Lab Europe Ltd] advancing our knowledge and sharing their respective expertise. These sessions are always worthwhile – it’s a welcome opportunity to refresh and re-engage with all aspects of aluminium, not just powder coating.”
The QUALICOAT Advanced Technician training helps member representatives (technicians) identify defects and provides a deeper understanding of everyday products – what to consider and how to handle those products before and after they leave the facility, and how effective cleaning can extend a product’s lifespan and revive a product dulled by exposure. It’s a practical session with real world examples.
Each successful candidate receives a Certificate of Attendance.
QUALICOAT UK & Ireland is the National Association for QUALICOAT, a quality label organisation committed to maintaining and promoting the quality of powder coating on aluminium and its alloys for architectural applications.
QUALICOAT UK & IRELAND CHARTS FUTURE AT HISTORIC CORK MEETING
The second QUALICOAT UK & Ireland council meeting of 2026 successfully took place in the Council Chamber of Cork’s City Hall. This event marks a major milestone as the first since announcing the move to new Secretariat, the Council for Aluminium in Buildings. With many members making the trip from the United Kingdom to Cork, and others joining online, there was a particularly high turnout.
Civic welcome to Cork
The council meeting was preceded by a welcome dinner held the previous evening at the Imperial Hotel and hosted by the Lord Mayor of Cork, Cllr Fergal Dennehy, plus an exclusive tour of the Lord Mayor’s Chamber – one of the finest examples of Classical architecture in Ireland and where delegates were invited to sign the distinguished visitors book.
Commenting on the experience, Chair of QUALICOAT UK & Ireland, Chris Mansfield, said: “Fergal was an amazing host and his behind the scenes tour was fascinating. It was a great honour for Jan
(Lukaszewski) and I to sign the visitors’ book, sharing the same pages as historical icons like Queen Elizabeth II, President John F. Kennedy and Princess Grace of Monaco.”
Opening speech from the Lord Mayor
In a warm and engaging speech, the Lord Mayor welcomed attendees to the council meeting. “… as a centre for innovation and advanced manufacturing (Qualcomm and Apple both operate from Cork and the city will soon be home to Ireland’s tallest building), we understand the importance of organisations like
QUALICOAT in driving and promoting standards and supporting industries that shape the future of our built environment.
“We’re especially proud to welcome delegates from the UK and from all over Ireland […]. Your presence here reflects the importance of collaboration, shared experience and the strong international relationships we have here. Values that are very much at the heart of Cork and our identity as an outward looking city.”
Chris MansfieldQUALICOAT UK & Ireland Chair
Talk
LEADING UK MANUFACTURERS
Paint & Powder Coating Systems
TD Finishing have been operating for over 20 years, leading the industry with expert engineering and premium manufacturing ability.
Inline spray pretreatment
Dip pretreatment systems
Drying & curing ovens
Overhead conveyor systems
Manual batch plants
Design
TD Finishing plants are all custom designed and made to order, designed specifi cally for your requirements.
Using the latest in CAD Design Technology
Bespoke and made to order
Optimised design to suit your needs
All paint and powder coating Systems manufactured by TD Finishing are made in the UK, with UK quality guaranteed. UK Manufactured
Guaranteed UK Quality
Supplied Globally Manufacture
Install
Our complete finishing systems are fully supported by expert installation teams, ensuring your plant runs at its best from day one .
Dedicated UK Based Installation & Support Teams
Comprehensive training and support Service & Maintenance Plans Available
Strategic direction and insights
A major focus of the meeting was the global progression toward QUALICOAT 3.0, an initiative aimed at eliminating field failures by expanding licensing and auditing standards directly to aluminium extruders. Pilot auditing is already underway across three designated plants worldwide to ensure that raw materials meet stricter criteria before reaching the coating stage. In addition, the Technical Committee highlighted ongoing global work regarding the regulation of PFAS ‘forever chemicals’ and gathering data to optimise pre-anodising standards for aluminium sheets and panels.
On the legislative front, the organisation is actively collating member feedback to drive a comprehensive revision of BS EN 12206. Operationally, QUALICOAT UK & Ireland celebrated strong growth with two new licences finalised and four more in progress. Members also received an exclusive overview of QCT 360, a single, bespoke digital certification platform built to replace a fragmented tracking system for coaters, powder suppliers and pre-treatment suppliers.
Technical excellence
To make the most of the expertise of visitors like independent inspector, Oliver Bögler and Jim Regan from Q-Lab Europe, Ltd., QUALICOAT UK & Ireland held an additional technician training event on 19th May hosted by Architectural & Metal Systems (AMS) in Wallingstown, Co. Cork. This provided a vital local opportunity for Irish members to maintain the prestigious quality label.
Gratitude and appreciation for Irish hosts
During the meeting QUALICOAT UK & Ireland extended its gratitude to the Lord Mayor of Cork, Cllr Fergal Dennehy and the City Hall team for their support and hospitality, and to Pat O’Hara Managing Director of AMS – a long-established QUALICOAT-certified applicator, for suggesting that the meeting be held in Cork and at City Hall.
Reflecting on the success of the event, Chris concludes: “The whole experience has felt like a coming of age for QUALICOAT UK & Ireland – it’s a visit that we will all remember, and we look forward to whenever we might return to Cork.”
QUALICOAT UK & Ireland is the National Association for QUALICOAT, a quality label organisation committed to maintaining and promoting the quality of powder coating on aluminium and its alloys for architectural applications.
Telephone: 0333 240 9735
Email: jan@qualicoatuki.org
Website: www.qualicoatuki.org
BCF 2026 ANNUAL CONFERENCE
HIGHLIGHTS COLLABORATION ACROSS THE SUPPLY CHAIN TO TACKLE INDUSTRY CHALLENGES
The British Coatings Federation (BCF)
2026 Annual
Conference brought senior figures from across the UK coatings industry together around a clear message: collaboration across the supply chain is essential to tackling the sector’s biggest challenges. Speakers explored how businesses can respond collectively to market pressure, regulatory change, sustainability demands, supply disruption, digital risk and the need for strong leadership.
Held on Thursday 4th June at Whittlebury Park in Towcester, the conference brought together expert speakers from across the coatings value chain and beyond, underlining BCF’s role in convening the conversations and partnerships needed to address shared challenges. From raw materials and chemicals to sustainability, packaging, cybersecurity and leadership, the programme showed how joined-up thinking will be critical to the industry’s future success.
The second session focused on supply chain and sustainability challenges and opportunities. Mais Haddadin and Jane Smith of FGENexantECA explored the future of the European chemicals supply chain and the balance between growth
and sustainability. Reg Adams of Artikol then provided a primer on TiO2 for the coatings industry, before Sam Reeve of Resource Futures discussed circularity for packaging in the UK.
In the afternoon, delegates heard from keynote speaker Guillermo Christensen on good cybersecurity and AI governance, offering a timely perspective on risk, resilience and responsible innovation as digital technologies become more embedded in business operations. The final keynote came from Dee Caffari, whose talk, ‘Going against the tide’, closed the main speaker programme with reflections on endurance, leadership and navigating uncertainty.
BCF CEO Tom Bowtell also reviewed the year and outlined the future challenges facing the sector, before BCF President Jane Ryder closed the conference. The event concluded with the annual drinks reception, industry dinner and entertainment from comedian Dominic Holland, giving delegates further opportunity to connect with industry peers and continue the day’s discussions. During the evening, a charity raffle was held to fundraise for BCF’s charity partner, The Myton Hospices, raising over £2,000.
Commenting after the event, BCF CEO Tom Bowtell said: “A strong theme running through this year’s conference was the importance of collaboration. The challenges facing our industry, whether around supply chains, sustainability, regulation, digital risk or future growth, cannot be tackled in isolation. BCF’s role is to bring the industry together, connect different parts of the sector, and lead collaborative action on the issues that matter most.”
The BCF Annual Conference remains one of the federation’s flagship events, bringing together decision-makers from across the paints, coatings, printing inks and wallcoverings sectors to share insight, strengthen networks and support collaborative progress on the key issues shaping the industry’s future.
The BCF would like to thank lead sponsor Terrafend, and sponsors The Rakem Group, IMCD and Orr & Boss for their support.
Email: info@bcf.co.uk
Visit: www.coatings.org.uk
SURFACEPREP ANNOUNCE NEW PARTNERSHIP
SurfacePrep UK has announced a new partnership with OMSG, the Italian manufacturer of automated shot blasting, shot peening and surface treatment machinery, to make OMSG automated blasting equipment more accessible to customers across the UK.
Under the new partnership, SurfacePrep UK will add a wider range of automated systems to its existing surface preparation, abrasives, finishing, servicing and technical support offer.
The agreement gives UK manufacturers a clearer route to explore automated blasting solutions through a local partner with established surface preparation expertise. For OMSG, the partnership provides a stronger route into the UK market through a business already supporting customers across abrasive blasting, media selection, equipment servicing, testing, compliance and process support.
The announcement comes as more manufacturers look for ways to improve production consistency, reduce manual handling, control finishing quality and make better use of skilled labour.
Automated blasting can help businesses move from labour-intensive manual blasting towards more repeatable, controlled and productive surface treatment processes.
Rather than relying only on manual operation, automated systems can be configured so components move through a controlled blasting process using the right machine type, handling method, abrasive, blast parameters and recovery system. This can help manufacturers improve consistency from batch to batch, reduce avoidable rework and support higher throughput where the application is suitable.
For SurfacePrep UK, the partnership strengthens its ability to support customers who need more than standalone blasting equipment. As a company, SurfacePrep UK works across surface preparation equipment, abrasives, blast rooms, cabinets, PPE,
servicing, training, testing, compliance support and after-market services. Adding OMSG automated systems extends that offer into more advanced production environments where automation, repeatability and integration with existing processes are critical.
OMSG brings significant specialist manufacturing experience to the partnership. Established in 1961, the company, designs and manufactures shot blasting, shot peening and machine systems for sectors including foundries, steel construction, forging, aluminium die casting, galvanising, oil and gas, gas cylinders and many other industrial applications. OMSG has installed more than 5,500 shot blast machines in 86 countries, supported by an international commercial and after-sales network.
Paul A Griffiths, Managing Director at SurfacePrep UK, reported:
“Many UK manufacturers are under pressure to improve output, reduce rework and make their finishing processes more consistent. Customers need technical guidance, application understanding, correct media selection and long-term support. Within our portfolio, we offer stand-alone solutions through to full automated process lines, complete turnkey solutions. Our partnership with OMSG gives us a stronger automated blasting offer, backed by proven machine technology and SurfacePrep UK’s local service and support.”
The partnership is expected to support manufacturers across a range
of applications, including cleaning, descaling, surface preparation before coating, foundry work, structural steel, component finishing and other production environments where blasting consistency and throughput are important.
Edoardo Pisoni, Sales at OMSG, said:
“OMSG are very pleased to begin our agreement with SurfacePrep UK, their company, and their team. I look forward to cooperating with all to create a long-term, mutually satisfying partnership. I look forward to sharing a great start with this new agreement!”
SurfacePrep UK will work with customers to understand their component type, production volume, required finish, handling constraints, available space, abrasive requirements and wider operational objectives before recommending a suitable automated blasting solution.
The company says the focus will be on helping customers make informed decisions, not simply introducing new equipment. Automated blasting can deliver major benefits, but only when the right system is matched to the right application and supported properly throughout its lifecycle.
The partnership is now live, with SurfacePrep UK available to discuss automated blasting requirements with customers across the UK and Ireland.
Call 0114 254 0600 to discuss how OMSG & SPUK can streamline your operations.
ANOTEC INTRODUCES SURTEC 650 SURFACE TREATMENT FOR AEROSPACE AND DEFENCE APPLICATIONS
be applied at Anotec via immersion.
Surface treatment specialist
Anotec has announced the introduction of SurTec 650, a high-performance process increasingly specified in the defence and aerospace sectors.
Anotec, part of the Anochrome Group, will start offering the service immediately in response to a rise in demand as it strengthens its capability to support OEMs and Tier 1 suppliers operating in demanding sectors.
SurTec 650 is a highly effective, trivalent chromium passivation (TCP) process used primarily for aluminium and alloys and is frequently specified as a RoHS compliant pre-treatment prior to painting.
It offers excellent bare corrosion protection comparable to hexavalent passivation.
Steve Norman, Commercial Director at the Anochrome Group, said: “Following positive meetings with SurTec, we are delighted to add this process to our offering.
“The dynamic and agile nature of the Anochrome Group means we have been able to propose, approve and integrate the process within a matter of weeks for the benefit of our customers.
“We’re ready to talk to any manufacturer or Tier 1 supplier that requires SurTec 650 at volume and with quick turnaround times.”
Fulfilling all requirements of ELV and WEEE as well as RoHS, SurTec 650 will
The product forms a shiny coating that also provides an ideal pre-treatment for painting, powder coating and adhesive bonding.
The process is compatible with alloyed and cast aluminium, offering manufacturers a versatile and easy-tohandle solution across a range of industrial applications.
The product meets or exceeds key aerospace and industrial standards including MILDTL-81706B and MIL-DTL-5541F, while also being approved by QUALICOAT.
With strong heat resistance, low contact resistance and proven salt spray performance, SurTec 650 provides reliable, environmentally responsible surface protection for demanding operating conditions.
The introduction of SurTec 650 is the latest step in Anochrome’s growth in the aerospace sector,
with Anotec recently achieving the crucial AS9100 certification after a rigorous auditing process.
Steve added: “Aerospace is a strategically important sector for us and I am delighted we can now help more customers with specialist highperformance coatings.”
Visit www.anochrome.com for more information.
www.surtec.com
Steve Norman, Commercial Director at the Anochrome Group
Functional Coatings
Fullwhenreliability it counts
SurTec as a complete coating system provider for fasteners
As specialists in functional coatings, we combine expertise in the coating and finishing segment of metals (especially fasteners such as screws, etc.) and plastics.
With SurTec, our customers receive a go-to expert or essential fastener functions.
We are part of SurTec, supplier of chemical specialities for surface treatment.
SurTec is a group of companies within Freudenberg, a familiyowned, renowned, German-based, and globally operating business.
TEXTUREJET RELOCATES TO LARGER FACILITY IN RIPLEY, DERBYSHIRE TO SUPPORT NEXT PHASE OF GROWTH
A strategic move to expand capacity, accelerate innovation, and meet rising global demand
TextureJet has relocated from its premises in Nottingham, to a larger facility in Ripley, Derbyshire, marking a significant milestone in the company’s continued growth.
TextureJet originated as a PhD project at the University of Nottingham and has developed into a leader in advanced surface processing technology. Its proprietary electrochemical jet machining technology enables highly precise, selective material removal, supporting more efficient and streamlined manufacturing processes.
The innovative, globally patented technology supports a wide range of applications, including deburring, crosshole deburring, part marking, and surface preparation for most metal surfaces.
The move reflects sustained commercial growth over the past seven years and increasing demand for TextureJet’s
technology. The company is continuing to expand its global presence, exhibiting at numerous international events later this year, including IMTS Chicago and AMB Stuttgart.
The new Ripley facility provides significantly increased floorspace across two levels, with dedicated areas for research and development, expanded workshop capacity, and improved facilities for customer engagement. It will support TextureJet’s ongoing innovation, including further development of its STAT® platform, while enabling the business to scale operations, focus on research and development and grow its engineering team.
Founder and CEO Jonathan MitchellSmith commented: “This move marks an important milestone for the business. Our new premises give us the space and capability to scale our operations, support increasing customer demand, and continue advancing our technology. It’s an exciting step forward for the whole team that will enable us to bring advanced surface processing to even more companies.”
As TextureJet continues to scale both domestically and internationally, the new facility provides a strong foundation for the next phase of its focused development and strategic expansion, reinforcing the company’s position at the forefront of sustainable surface processing innovation.
About Texture Jet
TextureJet is redefining surface engineering with cutting-edge technology that empowers manufacturers to selectively modify component features and surfaces with precision and control. We are dedicated to driving innovation, streamlining production processes, increasing sustainability and delivering transformative results for industries worldwide. Our team is full of innovative ideas and creative strategies to address the surface processing demands of today’s businesses, both now and in the future.
Find out more about TextureJet: www.texturejet.com
Outstanding Powder Coating Performance
Advanced Automation and Color Change
• Superior coverage and process control for significant powder savings
• Fast, reliable, highly automated color change with visual access
• Advanced automation solutions for reduced manual coating
• High finish quality with advanced charge control and ultrasonic sieving
• Industry 4.0 ready IO links
• User-friendly, connected controls with visual guides and help content
www.nordson.com/powder ics.eu@nordson.com
PUMPS & FILTERS
L SERIES | Medium flow rate filter
P SERIES | Ultra-high flow rate filter A SERIES | Mechanical seals pump M SERIES | Magnetic drive pump
When Stephen Howett joined Borough in 1986, Britain’s bestselling car was the Ford Escort, achieving more than 150,000 sales in the year. Quality management has changed since then to require a dedicated liaison professional, someone with the knowledge, temperament and credibility to sit across from a client and discuss tolerances, accreditation and continuous improvement.
Forty years on, Stephen retires from Borough, having spent much of that time as precisely that dedicated professional.
Borough’s story over the past four decades mirrors much of what has happened to British precision manufacturing more broadly.
The business was transitioning from traditional metal plating into the technically demanding world of plating
on plastics; a shift that opened the door to even more work with the automotive sector but brought with it an entirely different set of expectations from customers.
Quality became a commercial differentiator and automotive-specific standards moved from nice-to-have to non-negotiable. Customers with global supply chains and zero-defect programmes needed more than a good product; they needed a reliable point of contact who understood their requirements and could be trusted to accurately represent a supplier’s capabilities.
Stephen became that point of contact.
Over the course of his career, Stephen supported sales teams, attended trade exhibitions and visited customers on-site across the country.
He did so without fuss and without fanfare. His approach was patient and methodical: understand what the customer needed, establish whether Borough could deliver it and ensure the relationship was maintained to the standard both parties expected.
That combination of technical knowledge, commercial awareness and interpersonal reliability is not easily replaced. It accumulates over time and it shows in the relationships he built. Many of the customers Stephen dealt with in his early years remained Borough customers throughout his tenure.
Joint Managing Directors at Borough, David Brereton and Nick Coombes, have worked with Stephen for much of those four decades, David said: “Stephen has been part of the fabric of this business for as long as most of us can remember. The industry he joined and the industry he leaves are almost unrecognisable from one another and yet his approach never wavered.
“He brought consistency, professionalism and a genuine commitment to the customer to everything he did.
We will find it hard to replace his ‘can-do’ attitude that always ensured the needs of our customers were at the heart of the decisions we have made during our growth. That matters, and it will not be easily replicated.”
Stephen retired on 29th May 2026 at the age of 78. Outside of work he is a committed Tottenham Hotspur supporter, a fact that has required considerable patience over the years and will, no doubt, continue to do so. Borough wishes him a long and healthy retirement.
Visit: www.borough.co.uk
Scan & Spray
Dynamic Contour Detection
Programming-free coating of any shape! Gema
The second generation of Dynamic Contour Detection detects the object contour fully automatic and positions the guns individually even for thin objects and at high conveyor speeds. Due to the programming-free adaption of all relevant line settings the application range is significantly extended.
Email: uk.sales@gema.eu.com
NEW: COLOR2CHECK
Portable Color Quality Control for Basic Entry-Level Use Standards
BYK-Gardner – worldwide partner of the automotive, paint and plastic industries for quality control of color, appearance and physical properties – is introducing the new color2check, a portable spectrophotometer that offers a simple and affordable start to color quality control. The instrument complements the newly introduced color2go and expands BYK-Gardner’s portfolio of portable spectrophotometers to meet customer needs, ranging from basic entry-level use to professional applications.
The color2check features a lightweight and rugged design with horizontal alignment, making color measurements simple, stable, and secure. Its 2.8-inch color touchscreen with icon-based menus, clear data tables and graphical displays ensures intuitive operation.
“Touch and swipe” can be used as on a smartphone — even when wearing gloves — enabling efficient use in laboratory, production, or field environments. To ensure long-term protection, the instrument is delivered with a dedicated garage. When not in use, the color2check can be safely stored to protect it from dust. The garage also provides space for the test standard box so that it’s always close at hand.
The color2check focuses on reliable color measurement and represents a practical solution for customers who do not require gloss measurement and are satisfied with wider specifications. Digital standards cannot be exchanged, meaning physical working standards must be measured as a reference with every color2check. This makes the instrument well suited for internal quality control tasks with less stringent specification demands. The instrument benefits from proven BYK LED illumination, providing excellent shortterm, long-term, and temperature stability. No calibration is required for up to three
months, and the LED light source comes with a 10-year warranty, eliminating the need for lamp replacement during the instrument’s life.
With its combination of essential measurement capability, intuitive operation, and attractive price, the color2check provides a robust and accessible starting point for establishing color quality control. It is a practical option for users seeking a reliable entry-level solution while maintaining the expected BYKGardner quality.
For professional users with more advanced requirements, the color2 family also includes the color2go, featuring additional gloss measurement, a digital standard, and two software licenses.
More information is available from BYK-Gardner GmbH, P.O. Box 970, 82534 Geretsried, Germany: By fax: +49-8171-3493-140, the free service no. 0-800-gardner (0-800-4273637) or on the Internet at www.byk-instruments.com
New oven model: EcoSmartCure
ENERGY-FLEXIBLE
DRYING: DÜRR INTRODUCES QFLEX TECHNOLOGY
Up to now, ovens used in automotive drying have always been designed for a specific heating method. Fluctuating energy prices, insecure supply, and ambitious CO2 targets are increasing calls for more flexible systems. With its Qflex technology, Dürr introduces a new concept that enables a complete decoupling of all ovens from the heat source. This allows car manufacturers to use different energy sources or switch from one source to another in the future without structural changes to the oven.
Dürr is equipping its entire range of ovens with centralized heating technology and will focus on two energy-flexible systems in the future: the EcoInCure and the
EcoSmartCure with Qflex technology. The variable heating circuit in the ovens can be operated with all relevant heat sources, whether natural gas, electricity,
or even hydrogen in the future. This energy flexibility means that the system operator is no longer tied to one specific type of energy based on the chosen oven type.
“It is impossible for anyone to predict today what source of energy will be available in plentiful supply and at a reasonable cost tomorrow,” says Dr. Heiko Dieter, product manager at Dürr, in explaining the benefits of the new concept. “If, for example, the gas supply is interrupted at short notice, there is a risk of costs increasing and even production being interrupted.
The EcoSmartCure combines a centralized heating concept with a stop-and-go principle.
Energy-flexible ovens guarantee an alternative supply in this case. If a source of energy is no longer economical, operators can switch to another source with minimal effort – without having to interfere with the oven’s structural fabric. Choosing a hybrid system also makes it possible to automatically switch to the cheapest energy source depending on the time of day.”
Qflex technology as the technological foundation
At the heart of the concept is a central heating module that generates heat for drying car bodies and supplies it as needed to the individual zones using a heating circuit. The standalone heating module can be powered using gas or electricity. If an operator wishes to switch the energy source later, for example because it is installing its own solar power system, there is no change to the oven and only the heating module is modified. The Qflex technology also makes it easy to integrate innovative technologies such
as electric high-temperature storage units to store energy for later use.
Two ovens designed for distinct application profiles
The EcoInCure transverse oven, which has proven itself in over 30 paint shops worldwide, meets the highest requirements for heating response, process reliability, and paint quality. The EcoSmartCure is an innovation based on the traditional longitudinal mode of operation. What makes it innovative is how it combines the central heating concept with a stop-and-go principle, in which the body goes through defined stationary phases. Compared with conventional ovens, this mode of operation enables much more precise temperature control. The body is strategically heated where necessary, rather than applying air to large areas. This reduces thermal stress, especially for thicker parts like the sills of electric vehicles, and improves paint quality.
Dürr is equipping its entire range of ovens with centralized heating technology.
Compact design for new builds and modernization of existing plants
Both ovens are compact single-level systems that do not require any additional power unit levels. Their low space requirement makes them easy to integrate into existing buildings. EcoInCure and EcoSmartCure are therefore an economically attractive solution for brownfield modernizations – for both CAPEX and OPEX projects.
The EcoSmartCure is currently being tested for industrial use. “The strong customer interest and two projects already underway confirm to us that we have hit the mark with this new development,” says Dr. Dieter with conviction. “Energy flexibility is no longer a distant vision. The Qflex technology in our ovens now offers a solution for responding flexibly to volatile energy markets and changing conditions in automotive production.”
The law requires UK employers to provide adequate ventilation in enclosed areas of the workplace to remove stale or contaminated indoor air and bring in fresh air. This is mandatory as a result of UK ventilation regulations that must be strictly adhered to, with failure to do so risking employee sickness and financial penalties for the business.
While the law applies to all sectors, it’s particularly important when employees are working in a potentially hazardous environment. A risk assessment will identify issues and determine the necessary measures to minimise the risks of air pollutants to help achieve high quality indoor air.
Legal requirements for workplace ventilation
The employer must ensure every enclosed workspace has adequate ventilation to allow a “sufficient quantity of fresh or purified air” to enter under Regulation 6 of the Workplace Health, Safety and Welfare Regulations 1992.
Ventilation refers to the process of bringing in fresh air from outside, or purifying indoor air which may contain pollutants and impurities, or may be stale, hot and humid due to work processes and machinery. This can include ventilation in warehouse environments, for example, where a healthy and safe environment is essential to protect both employees and stored goods and equipment.
A more specific law, the Control of Substances Hazardous to Health Regulations 2002, known as COSHH, covers the safe removal of harmful substances from the air by using a dust or fume extraction system. This protects
employees in high risk environments who may be exposed to pollutants such as welding fumes, or dust generated by various industrial processes.
COSHH legislation has been in place for more than 25 years, with the most recent version, in 2002, enhanced with amendments from the Control of Substances Hazardous to Work Regulations 1999.
UK ventilation laws were updated in 2021, when Part F of the Building Regulations was amended for buildings other than dwellings, with the changes coming into effect on 15th June 2022. The update included requirements for both mechanical and natural ventilation, with the emphasis on providing adequate air extraction and supply in different building types. This legislation works in conjunction with the Workplace Health, Safety and Welfare Regulations 1992.
Health risks associated with poor ventilation
The primary health issues include respiratory diseases, headaches, fatigue and long-term illnesses. It may also worsen conditions like asthma and allergies, or cause eye irritation. Around 12,000 deaths annually are linked to earlier exposure to dust and fumes in the workplace, with the majority being due to respiratory issues.
According to the Health and Safety Executive, an estimated 13,000 cases of breathing and lung problems every year are caused or worsened by working conditions. In addition, poor ventilation can contribute to the growth of mould, further impacting air quality and potentially causing respiratory issues and allergic reactions. Airborne irritants can lead to coughing and sneezing, headaches, dizziness, nausea and irritation of the eyes, nose and throat.
Main causes of poor ventilation
Common causes include an outdated infrastructure, lack of proper filtration
systems, inefficient HVAC systems and failure to address specific air quality needs in certain environments.
We can help businesses comply with the regulations and keep employees safe. When you purchase an AirBench dust extraction system, you’re choosing the UK’s leading range of downdraught benches that capture dust using internal filters, returning clean air to the room.
Similarly, our fume extraction systems provide a safe and healthy working environment. An essential part of your COSHH compliance, they can protect your people and products from gases, fumes, solvents and smoke. A build-up of fumes and debris can be highly dangerous over time, so removing pollutants effectively is crucial to employee safety. Using a powered fan to create a negative draught, our fume extractors remove airborne contaminants created by day-to-day processes.
Our systems include downdraught benches to capture fumes from solvents
or solder using filters to suit each specific application. In addition, our VertEx cross-draught systems extract and filter fumes through a wall, or we can provide a full booth with an optional VB system, enabling the operator to work in a fully extracted space without risk of contamination.
Penalties for sub-standard workplace ventilation
The consequences for businesses that fail to meet legal requirements are severe, as non-compliance can result in unlimited fines, damage to employee health, reduced productivity and even reputational harm.
Don’t leave anything to chance: contact us for information on our products and services, and make sure your business is compliant with workplace regulations.
HMG PAINTS “1K DTM” SYSTEM FOR STORAGE WAREHOUSE REFURBISHMENT
HMG Paints Ltd, the UK’s leading independent paint manufacturer, has partnered with specialist commercial contractors Anglia Decor to successfully deliver a comprehensive refurbishment of a Self-Storage warehouse unit.
Utilising HMG’s advanced “1K DTM” (Direct to Metal) system Anglia Decor transformed the tired yellow unit into a completely refreshed white and red livery. The project highlights how highperformance coatings can streamline commercial transformations with zero operational downtime.
Operating within a live commercial environment presented a unique set of logistical challenges. Anglia Decor was tasked with executing a complete coating upgrade while ensuring minimum disruption to customers accessing their storage units. Overcoming these strict site constraints required a combination of skilled application craftsmanship and a rapid turnaround, which was enabled by HMG’s highly efficient coating system.
Anglia Decor chose HMG Paints over competing manufacturers due to HMG’s product coverage capabilities, ease of ordering and exceptional technical service provided by representative Roger Blinco. To minimise on-site delays, HMG coordinated direct-to-site deliveries, ensuring all coatings arrived precisely when needed to support a seamless setup and an efficient workflow.
“We would recommend using HMG products and support service; we have found the 1K DTM has great coverage and gives a uniform finish. The ease of
order and quick delivery time made it incredibly easy to set up the job, get started, and achieve a high-quality result on a busy, live site” said Steve Massey, owner of Anglia Decor.
The 1K DTM system utilised on the project is engineered to combine primer and topcoat properties into a single, high-performance formulation.
Formulated for direct application to metal substrates, the product offers excellent
adhesion, corrosion resistance, and colour retention. Applied via spray application by the Anglia Decor team, the coating delivered an impeccable, uniform finish across the facility’s surfaces, significantly upgrading the units aesthetic appeal and long-term durability.
“It’s clear to see why Anglia Decor were asked to travel halfway across the country for this project when you see the transformation from a tired looking yellow
unit to the stunning new red and white livery” commented Roger Blinco, HMG Technical Sales Manager. “The team have done a great job on this project and we’re proud to have worked with them to identify the right product specification and provide technical support.”
The collaboration highlights HMG Paints’ commitment to supporting independent commercial contractors with agile manufacturing and personalised account management. From technical support and initial order placement through to precise site delivery, the streamlined process allowed Anglia Decor to optimise their daily business operations and deliver complete building solutions for a variety of customers.
Anglia Decor (www.angliadecor.co.uk) is a premier commercial painting and protective coatings contractor specialising in large-scale industrial, commercial, and retail refurbishments
across the UK. Guided by core values of integrity, customer satisfaction, and a well-trained workforce, the company are specialist contractors in resin and epoxy flooring, industrial roofing, cladding installation and industrial painting.
1K DTM is available direct from HMG Paints or via their nationwide distribution network. For more information on the HMG Paints range of cladding and industrial coatings or for technical support visit www.hmgpaint.com
Coatings Inspection Equipment
It’s not just the Elcometer 456 Coating Thickness Gauge that’s fast... Generate professional inspection reports in seconds using the FREE ElcoMaster® Data Management Software.
3M™ NOVEC™ PHASE-OUT: RUNNING LOW ON STOCK?
ENVIROTECH EUROPE SUPPLY DIRECT REPLACEMENTS
In December 2025, the deadline arrived. 3M™ officially discontinued its Novec™ Engineered Fluids, ending supply of a product range that had become deeply embedded in precision cleaning and degreasing processes across electronics, aerospace, medical devices, and precision engineering industries. For many companies, the phase-out disrupted supply chains, inflated costs, and led to companies searching for alternatives. If you haven’t yet found a reliable long-term replacement, now is the time to resolve that.
The Novec™ Phase-Out: The Situation Today
Final orders for most 3M™ Novec™ grades closed on 31st March 2025, with supply ceasing entirely by 31st December 2025. Six months on, the impact is being felt across the industry:
Remaining stocks have largely dried up, with availability now extremely limited.
Prices for any remaining inventory have climbed sharply.
Businesses still reliant on Novec™ processes face growing operational risk.
The phase-out is complete. The question now isn’t whether to transition, it’s how quickly you can do it well.
ProSolv® Direct Replacements - Engineered for a Seamless Switch
EnviroTech Europe developed this range specifically to meet this moment. Formulated as chemically precise, drop-in
alternatives for all Novec™ grades, ProSolv® solvents are designed to slot into your existing processes without disruption:
No equipment changes requiredfully compatible with existing vapour degreasing systems.
Proven in transition - already adopted by companies across multiple sectors since the phase-out.
Future-Proof Your Process with PFAS-Free Solvents
For businesses using this transition as an opportunity to future-proof their processes, EnviroTech Europe offers ProSolv® 5408e, a next-generation, PFAS-free solvent that aligns with tightening global regulations and evolving sustainability commitments. It delivers zero ODP (Ozone Depletion Potential) and a GWP (Global Warming Potential) of less than 1, without compromising on performance.
ProSolv® 5408e has been independently evaluated across a rigorous set of testing standards, including:
Flash Point - ASTM D3828 and ASTM D93
Flammable Limits - ASTM E918
Stock Loss - ARP1755B
IGA Intergranular attack.
Stress Corrosion of Titanium Alloys - ASTM F945-12
Hydrogen EmbrittlementASTM F519-17a
From First Assessment to Full Transition
EnviroTech Europe backs the ProSolv® Direct Replacements line with hands-on support to make your switch as smooth as possible, with free on-site assessments, cleaning trials, sample materials and technical consultations. Long-term supply stability is guaranteed through UK-based manufacturing and a global distributor network.
Your Next Steps: Secure Supply, Minimise Risk
If the December deadline caught your business mid-transition or if you’re still evaluating options, there’s a clear path forward:
Review your current Novec™ inventory.
Contact EnviroTech Europe for an on-site assessment or to claim your free product trial.
Evaluate ProSolv® matches - including standard and PFAS-Free blends.
Run qualifying trials to confirm fit with your specific application.
Switch to the appropriate ProSolv® alternative and enjoy a seamless change from 3M.
Your Partner Through the Transition
EnviroTech Europe’s team is ready to assess your specific process, identify the right ProSolv® match, and get you moving forward with confidence.
ProSolv® Direct Replacements deliver performance-equivalent alternatives to 3M™ Novec™, backed by full technical support and long-term supply stability, so you can protect your precision-cleaning processes and secure your supply chain for the long term.
Visit www.envirotech-europe.com/3mnovec-replacements for full product information.
All vapour degreasing products are supplied and supported by EnviroTech Europe Ltd. Manufactured in the United Kingdom and available on short delivery times through our dedicated team of distributors worldwide.
Automatic Airmix® spray gun
THE BEST AUTOMATIC AIRMIX® SPRAY GUN FOR THE MOST DEMANDING JOBS IN FINISHING AND PRODUCTIVITY
Innovative patented aircap with automatic orientation feature
Quick-disconnect design reduces maintenance time
Outstanding reliability & finishing quality
YOUR CO-SOLVENT CLEANING
PROCESS IS
COSTING
MORE THAN YOU THINK
Understanding the cost, compliance and operational drivers behind co-solvent replacement.
For many electronics manufacturers, co-solvent cleaning has been a trusted method for removing flux residues, oils and particulate contamination from complex assemblies.
It remains a proven process. However, rising solvent costs, increasing environmental pressures and changing regulations are prompting manufacturers to ask an important question:
Is it still the most costeffective way to achieve the required cleaning standard?
No - many modern cleaning technologies
can now deliver comparable cleanliness levels while reducing operating costs and improving process efficiency.
Why Manufacturers Are Re-Evaluating Co-Solvent Cleaning
The biggest challenge is often no longer cleaning performance. It is cost.
Older open-top vapour degreasing systems can lose significant volumes of solvent through fugitive emissions. Combined with the high cost of fluorinated solvents, this can create a substantial ongoing expense.
Manufacturers must also consider evolving environmental requirements, workplace considerations and increasing demands for process efficiency.
At the same time, electronic assemblies are becoming more complex and cleanliness specifications more demanding.
The challenge is not simply finding a replacement chemistry. It is selecting
Comprehensive Lifecycle Management
KOCH manages finishing systems from concept to long-term support, ensuring seamless integration and reduced project risks.
Wide Range of Coating Technologies
KOCH offers turnkey solutions for liquid paint, powder coating, electrocoating, anodizing, plating, and porcelain enamel.
Focus on Sustainability and Ef ciency
Systems are built with energy-efficient technologies and eco-friendly features like wastewater and emissions control.
Global Reach with Local Expertise
KOCH operates globally with local presence in the US, Mexico, and Europe for close customer collaboration.
the right technology and process for the application.
Key Drivers for Change
Rising operating costs associated with fluorinated solvents.
Increasing environmental and emissions requirements.
More demanding cleanliness standards.
Pressure to improve efficiency and reduce waste.
The need to future-proof production against regulatory and supply chain changes.
Evaluating the Technology Options
There is no universal replacement for co-solvent cleaning. The best solution depends on the application, cleanliness requirements and production goals.
Three proven alternatives dominate the market:
Modified Alcohol (Hermetically Sealed): Vacuum-sealed solvent performance. Best for complex geometries and blind
holes. This means emissions are virtually eliminated, which results in significantly lower operating costs.
Aqueous Spray-in-Air: Combination of detergents, temperature, and high-pressure mechanical action. This means a flexible, easily integrated line, which results in reduced consumable costs versus fluorinated solvents.
Multi-Stage Aqueous: Dedicated, isolated cleaning, rinsing, and drying stages. This offers process control and repeatable, ultra-low contamination levels for high-reliability applications.
Greater control over emissions and workplace exposure considerations.
Reliable, repeatable cleaning performance.
The Importance of Process Selection
The most successful replacement projects begin with a detailed assessment of the application, supported by laboratory trials and technical evaluation.
The goal is not simply to replace an existing process. It is to identify the technology that delivers the required cleanliness standard at the lowest long-term operating cost.
Ready to Protect Your Production?
Legacy co-solvent systems are a financial and a regulatory liability. Upgrading your process isn’t about buying new equipment or chemistry, it is about engineered risk mitigation.
Schedule a Technical Consultation with Fraser Technologies that guarantees compliance, slashes consumption and waste - ensuring product reliability visit www.frasertech.co.uk or call 01506 443 058
ZERO-TOUCH MANUFACTURING AND THE STRATEGIC ROLE OF AMBER INDUSTRIES’
OVERHEAD CONVEYORS IN SURFACE FINISHING PLANTS
Transforming Paint and Powder Coating Operations Through Intelligent Material Handling with Amber Industries.
The philosophy is built upon several key principles:
Autonomous material movement
The UK manufacturing sector is undergoing a profound transformation driven by automation, digitalization, and the pursuit of higher productivity. At the centre of this evolution is the concept of Zero-Touch Manufacturing (ZTM)—a philosophy that seeks to minimize or eliminate routine human intervention throughout the production process.
While robots, artificial intelligence, and advanced process controls often dominate discussions surrounding smart factories, one critical technology frequently receives less attention despite its central role: the overhead conveyor system.
In surface finishing plants, overhead conveyors from Amber serve as the physical backbone of Zero-Touch Manufacturing, linking pretreatment, coating, curing, inspection, and packaging operations into a seamless and highly automated production flow.
The picture opposite illustrates a recent application of ZTM overhead conveyors from Amber Industries which link together robots and AGV’s to dramatically reduce non-value added manual operations at a surface finishing site.
Understanding Zero-Touch Manufacturing
Zero-Touch Manufacturing refers to a production environment in which products move through manufacturing processes with little or no direct operator intervention. Production decisions are increasingly made by interconnected systems that monitor performance, analyse data, and automatically optimize operations in real time.
Automated process control
Predictive maintenance
The objective is to eliminate repetitive, non-value-added activities and so freeing businesses to focus on engineering, process improvement, and operational oversight.
Nowhere is this approach more relevant than in modern paint and powder coating facilities.
The Challenge of Surface Finishing Automation
Surface finishing operations are inherently complex. Products must pass through multiple process stages, each requiring precise control of time, temperature, chemistry, and application parameters.
A typical finishing line includes:
Loading stations
Cleaning and pretreatment
Dry-off ovens
Paint or powder application booths
Flash-off zones
Cure ovens
Cooling sections
Inspection areas
Packaging and dispatch
Historically, many of these operations required significant manual intervention. Operators were responsible for moving products, adjusting production flow, monitoring process conditions, and managing work-in-progress inventory.
An Amber overhead conveyor working alongside robotics, AGV’s and advanced control systems enables the Zero-Touch Manufacturing philosophy to be implemented today which help keeps businesses globally competitive.
Intelligent Conveyors and Smart Factory Integration
The latest generation of overhead conveyors from Amber Industries’ has evolved far beyond simple transport equipment.
Through integration with Industrial Internet of Things (IIoT) technologies and Manufacturing Execution Systems (MES), conveyor systems now function as intelligent production assets.
Features commonly include:
RFID and Product Identification
Each carrier can be equipped with RFID tags or digital identifiers.
This allows the system to:
Track individual parts
Identify product types
Route components automatically
Store production history
Enable full traceability
As products enter the finishing line, the conveyor controller automatically directs them through the appropriate processing sequence, at the right time and in the right order -especially in today’s environment of reducing batches sizes when flexibility can be key to winning and fulfilling a contract.
Real-Time Process Synchronization
Modern conveyors communicate directly with:
Pretreatment systems
Powder booths
Paint robots
Ovens
Inspection stations
Production flow can be adjusted dynamically to accommodate changing workloads and process requirements.
Automated Accumulation
Power-and-free conveyor systems can temporarily accumulate products when downstream processes become constrained.
This capability:
Prevents bottlenecks
Maintains production continuity
Maximizes equipment utilization
Reduces manual intervention
Such functionality is fundamental to Zero-Touch Manufacturing environments.
Supporting Automated Coating Operations
The success of robotic paint and powder application systems depends heavily on overhead conveyor performance.
Consistent conveyor speed and positioning ensure:
Uniform coating thickness
Accurate robotic path control
Improved transfer efficiency
Reduced overspray
Higher first-pass yield
Looking Ahead
As artificial intelligence, robotics, and industrial connectivity continue to mature, overhead conveyors will play an increasingly important role in the development of autonomous finishing facilities.
Future systems are expected to incorporate:
AI-driven production scheduling
Digital twin simulation
Self-diagnosing components
Autonomous routing decisions
Machine learning-based process optimization
The convergence of these technologies will further strengthen the role of conveyors as intelligent infrastructure supporting highly automated finishing operations.
Conclusion
Zero-Touch Manufacturing represents the next stage in the evolution of industrial production, and surface finishing plants are among the sectors best positioned to benefit from its implementation right now!
Contact; Amber Industries @ lee.wright@amber-industries.ltd. uk for more information and to discuss your application.
Visit: www.amber-industries.ltd.uk
New post-processing solution celebrates world premiere at 3D Print in Lyon
AM SOLUTIONS PRESENTS INDUSTRIAL ENTRY-LEVEL SOLUTION FOR CLEANING AND SURFACE FINISHING OF POLYMER PARTS
AM Solutions – 3D post processing technology expands its portfolio with the S1 Basic, a new compact solution for the automated cleaning and surface finishing of 3D printed polymer parts in the industrial entry-level segment. The system addresses the growing diversity in the additive manufacturing market. While highly automated production solutions remain important, there is also a growing focus on compact systems for smaller parts and batch sizes. The S1 Basic will be presented for the first time at the 3D Print show in Lyon from June 2 to 4, 2026, and will be available for purchase starting that date.
Even in the entry-level segment of industrial 3D printing, demand is rising for automated post-processing solutions, as printer manufacturers increasingly introduce compact systems for smaller parts and batch sizes, facilitating entry into additive manufacturing. Meanwhile, manual post-processing steps are becoming less cost-efficient, reproducible, and conducive to high-quality parts.
The S1 Basic addresses the growing demand for entry-level additive manufacturing
AM Solutions has expanded its portfolio with the new S1 Basic, a solution that precisely addresses this demand. The system is specifically designed for the automated cleaning and surface finishing of smaller batch sizes in the polymer sector.
“We see printer manufacturers clearly intending to provide solutions for entry into additive manufacturing at an industrial level, alongside large, high-performance systems for series production. Smaller, more accessible products are lowering barriers to market entry, but expectations for part quality remain consistently high,” explains David Soldan, Head of AM Solutions – 3D post processing technology. “Regardless of this development, we recognized the need for a compact, industrial post-processing solution early on and began developing a corresponding system. With the S1 Basic, we will offer a commercially available product starting in June that fills this market gap, particularly for cost-effective and reproducible post processing of small batches,” Soldan continues.
The system’s development is based on AM Solutions’ extensive experience in industrial post-processing, particularly shot blasting technology. After multiple development and testing cycles, the S1 Basic was designed to be robust, stable, and user-friendly.
The new system will premiere at the 3D Print show in Lyon, where it will be showcased live at the AM Solutions / Rösler France booth. Rösler France is part of the Rösler Group,
which operates internationally, and is responsible for AM Solutions’ activities in the French market. A detailed technical presentation will take place as part of the official product launch in June.
For over 90 years, the privately owned Rösler Oberflächentechnik GmbH has been actively engaged in the field of surface preparation and surface finishing. As global market leader, we offer a comprehensive portfolio of equipment, consumables and services around the mass finishing and shot blasting technologies for a wide spectrum of different industries. Our range of about 15,000 consumables, developed in our Customer Experience Centers and laboratories located all over the world, specifically serves our customers for resolving their individual finishing needs. Under the brand name AM Solutions, we offer numerous equipment solutions and services in the area of additive manufacturing/3D printing. Last-but-not-least, as our central training center the Rösler Academy offers practical, hands-on seminars to the subjects mass finishing, shot blasting and additive manufacturing. The Rösler group has a global network of 15 locations and approx. 150 sales agents.
For detailed information, visit: www.rosler.com / www.solutions-for-am.com
Celebrating 40 years in business
This year, marks five decades as an independent powder coating specialist. We are proud to have one of the largest ranges of stock powder coatings in the UK, available for next day delivery. We have thousands of satisfied customers across diverse markets including construction, agriculture, leisure and retail as well as renowned architects and design houses.
PHOS-PREP
Pre-Treatment Solutions Group Ltd supply unique chemistries for an array of metal processes.
Our Phos-Prep® range of chemicals are chrome free, eco-friendly and cost effective all while maintaining quality and performance.
With over 50 years experience within the industry we pride ourselves on finding the right solution for your metal treatment. Whether that be degreasing, etching, phosphating, paint stripping and more!
TESTIMONIALS
“We have been a customer of PTS for over 20 years and during our time we have relocated our business, changed our pretreatment process with the full support and expert advice to implement changes from the PTS team. A great company who always go the extra mile to support their customers.”
P.Allen, West Midlands.
“We have been fortunate to have partnered with PTS for over ten years now. They are consummate professionals and always exceed expectations in terms of delivery of service, knowledge and customer care.”
E.Smith, Hampshire.
, queries whole
“We have had the great pleasure in working with PTS for over 5 years. No matter how big or small our queries are, PTS always come up trumps and in rapid time. The team are always willing to visit our site to help out with any issues we have or just for a general catch up with our staff. We have a very good relationship with the whole team at PTS and long may this continue.”
R.Glasbey, West Yorkshire.
IMPROVE YOUR EFFICIENCY
USING AN OVERHEAD CONVEYOR
suitable for carrying capacities up to 9.000 kg per load bar.
The Railtechniek van Herwijnen Group of companies, which Stewart Gill Conveyors Ltd have been a long time member of, provides complete solutions for complex requirements in the field of materials handling. They produce a wide range of overhead conveyors and materials handling products, such as manual conveyors, chain conveyors, power and free conveyors and crane systems. For the surface finishing industry the most frequently delivered systems are Power and Free conveyors. P&F conveying systems offer a high degree of flexibility and they can be completely automated.
P&F systems are equipped with load bars to attach the products. The products can be transported through the complete process (Power) or stopped for buffering or treatment (Free) without stopping the complete system. Stewart Gill Conveyors Ltd offer a wide range of P&F systems,
They specialise in systems for wet paint and powder coating lines, blasting installations, assembly lines, logistic and storage systems. A system that they offer specially for the surface-treatment industry is a dipping tank crane system. Dipping cranes transport metal products in and out of a series of pre-treatment tanks.
Advantages of a Power & Free Conveyor
Compact and save design with movable parts inside the tack
Modular system with standard parts
Flexible design for optimal lay-out planning
Advanced automatic control system with touch screen user interface and remote access.
Components
Different standard components are available to design the most optimal conveyor lay-out. The track sections are available as Power & Free, Free or only Power in standard or cut-to-length sections.
Bends can be horizontal or vertical. The radius of the bends is often standard. Non standard bends can be made on request. The power chain comes in standard chain link pitches and can be fitted with open or closed bearings.
Depending on product dimensions and the conveyor lay-out the product carrier can have different trolley configurations. Using multiple trolleys the load capacity of carrier can be increased.
A Power & Free system needs a drive system. Depending on system parameters the drive mechanism can be a caterpillar drive or a screw drive unit. For safety all drive units are utilised with a torque limiter that disconnects the drive force between the drive unit and gear motor.
Stop stations are available as standard design, ATEX or high temperature for curing ovens. Stop stations are controlled and monitored by the PLC/PC control system.
Switches are installed at the position where carriers must divert to other directions. Pneumatic cylinders with position sensors are used to actuate the switches. Depending on the position in the lay-out switches can also be self-switching. Switches are also controlled and monitored by the main control system.
To avoid as much as possible wear of the chain and trolleys a lubrication unit can be used. This automatic controlled device lubricates parts such as the chain links and bearings on a pre-set interval.
Special parts are available such as lift- and drop sections, transfer chains, pneumatic pushers and product rotation units.
There are also solutions to have a dipping tank crane system take over the products from the carriers and after the dipping process hang them back onto the carriers.
To find the best conveyor solution for your needs contact Stewart Gill Conveyors Ltd.
Telephone: +44 (0) 1926 641424
Email: info@stewart-gill.co.uk
Visit: www.stewart-gill.co.uk.com
Handling Solutions
Product Overview
Manual Monorail Systems
Unit loads up to 3000kg
Monorail Chain Conveyors
Unit loads up to 300kg
Power & Free Conveyors
Unit loads up to 7000kg
Floor Conveyors
Unit loads up to 500kg
Stewart Gill Conveyors Ltd have been supplying overhead conveyors into all sectors of industry for over 70 years.
As a long time member of the Railtechniek van Herwijnen BV Group based in the Netherlands, Stewart Gill Conveyors can offer a comprehensive range of overhead conveyor products which are capable of handling unit loads up to 7000kg.
Stewart Gill Conveyors Ltd offer complete manufacture, installation and commissioning, coupled with fully documented instruction, operation and maintenance manuals.
We do:
In-House 3D CAD engineering
In-House manufactoring in the UK and EU
In-House design of PLC/PC control systems
Industry 4.0
Worldwide installation and commissioning
Remote support, service & inspection Stewart
Part of the
THE USE OF MANUAL AND SEMI-AUTOMATIC OVERHEAD CONVEYORS IN PRODUCTION AUTOMATION BY NIKO CONVEYORS
- Act as storage buffers between automated and manual operations, absorbing variability.
There is a general assumption that powered conveyors are the future of automation, however that is not necessarily the case. Manual and semi-automatic conveyors can also be used within production automation and can in some cases provide a more efficient and effective solution.
NIKO conveyors are specialist in manual and semi-automatic overhead conveyor systems and the use them to assist within the automation of production lines in these six ways.
1. Streamlining Part Flow Between Stations
Overhead conveyors transport parts between workstations with minimal floor space usage:
- Ideal for lean manufacturing and just-in-time (JIT) production.
- Ensures continuous part movement, reducing bottlenecks in automated lines.
- Can feed parts directly into robotic cells or CNC machines.
2. Buffering and Accumulation
Semi-automatic systems can:
- Accumulate work-in-progress (WIP) between processes to balance different cycle times.
- Enable offline rework or inspection zones without disrupting flow.
3. Ergonomic Loading and Unloading
Manual conveyors assist human operators in:
- Positioning parts at ergonomic heights for loading into or unloading from automation systems.
- Reducing strain from lifting or moving heavy parts manually.
- Enabling collaborative workflows where humans and machines interact efficiently.
4. Step-by-Step Process Automation
Semi-automatic conveyors move parts in steps:
- Stop at fixed positions for robotic operations (e.g. welding, painting, assembly).
- Use sensors or RFID to detect load and trigger actions automatically.
- Controlled by PLCs to sync with other automated equipment.
5. Integration with Smart Technologies
Overhead conveyors can be enhanced with:
- IoT sensors to track part location, temperature, or load.
- Vision systems for inspection as parts move through the line.
- Barcode/RFID systems for identifying and routing parts automatically.
6. Flexible, Modular Automation
Manual and semi-automatic overhead conveyors support:
- Modular cell-based manufacturing, ideal for high-mix, lowvolume environments.
- Easy reconfiguration of production lines as automation needs evolve.
- Cost-effective scaling from manual to full automation.
Examples
of Use Cases
- Automotive Assembly: Moving car bodies between welding and painting robots.
- Food Processing: Semi-automatic conveyors used for product drying, coating, or cooling before packaging automation.
- Electronics: Moving circuit boards between manual assembly and automated testing stations.
Please contact NIKO Conveyors to find out more about how manual and semi-automatic conveyors can be used for production automation.
Contact NIKO Conveyors: Visit: www.niko.co.uk
Email: sales@niko.co.uk
Pull-Off Adhesion Testers
Measure the adhesion of coatings to metal, wood, concrete and more
n Impact and scratch resistant color Touch Screen display with keypad
n Wirelessly connect the PosiTest AT-A to your smart device using our free app
n Record the results as pass/fail and the nature of fracture cohesive, adhesive and glue failures
GET ATTACHED WITH PHOENIXTM
Smarter Thermocouple Solutions for Every Surface
A key component in any thru-process temperature profiling system is the thermocouple. Obviously at the end of the day the quality of any temperature data recorded is greatly influenced by how accurately and repeatably the thermocouple sensor
“Hot Junction” can be secured to the product surface. The increasing diverse mix of materials being used in manufacturing (steel, aluminium, alloys, plastics and composites) creates a significant temperature measurement challenge. The thermocouple needs to provide easy, reliable, and efficient attachment to the material type being measured. One thermocouple design alone will now not suffice. To address the problem PhoenixTM offers a comprehensive range of thermocouple designs developed for the challenge in hand.
For routine temperature monitoring of steel, as part of paint/powder coating cure QA the default thermocouple type has been the magnetic thermocouple. The thermocouple design allows quick, easy but accurate and repeatable placement of the measurement sensor on the steel surface. To address the ever-increasing space limitations in many applications the standard magnetic thermocouple design has been
complemented by the MiniMag thermocouple. The sensor head is only 30 mm diameter and 15 mm high so the MiniMag will fit in places previously impossible using traditional magnetic thermocouple designs. The design allows for use even in areas where the surface may not be flat.
Energy Product 32 MGOe) to any steel surface and is almost totally unaffected by temperature even at 200 °C. The Samarium Cobalt (Sm2Co17) magnet has a magnet temperature coefficient of only -0.03% per degree °C. This means only 7% loss in magnetic strength even when operating at 250 °C. The magnet is encapsulated within the thermocouple housing so there is no direct contact between magnet and coating.
Clamp Thermocouple
Exposed junction Thermocouple
PhoenixTM Thermocouple Range
This creates a significant benefit for coating processes such as Ecoat where adhesion between the thermocouple and cured coating layer may be problematic. The MiniMag thermocouple can be removed efficiently post cure without any risk of damage to the magnet and significantly less risk of damage to the product coating.
In routine monitoring thermocouple cable damage over time is to be expected with the physical and thermal demands of many processes. Conventionally this would necessitate the costly replacement
of the complete damaged thermocouple. To minimise the cost of such action PhoenixTM have designed the magnetic and clamp thermocouples with a unique replaceable cable option. This design feature offers a cost-effective on-site repair solution, reducing long-term running costs. Customisation of the cable lengths to suit changes in different applications is a further benefit of the interchangeable cable design.
For nonferrous metals such as aluminium the go to thermocouple of choice is the clamp thermocouple alternatively for permanently rigged test pieces the washer thermocouple may also be a viable option.
For composites, plastics the recommended thermocouple is the responsive, low thermal mass, exposed junction
thermocouple attached using high temperature tape. The versatile thermocouple can also be used also for air/environment monitoring possibly during essential oven survey operations (TUS). The exposed junction thermocouple is the perfect choice if monitoring paint cure in an IR oven (electric emitter or catalytic gas / radiant heater). The low thermal mass thermocouple can be overcoated to measure accurately the rapid surface heating at the interface between substrate surface and the coating, making it ideal for the challenges of the IR Cure application.
If confidence in measurement accuracy and precision is important in your product temperature profiling strategies, remember the thermocouple you choose is critical.
Contact PhoenixTM today to learn more about how we can help you maximise your test and measurement performance and reduce consumable costs.
Find out more at www.phoenixtm.com
BLASTING: SCALING UP WITH AUTOMATED BLASTING –SUPPORTING MUIJS
CONTAINERREPARATIE’S GROWTH THROUGH INNOVATION
When Muijs Containerreparatie sought a solution to enhance their blasting efficiency and improve working conditions, they turned to Blastman Robotics. Specializing in container repairs and surface treatment, Muijs needed a system that could handle old containers with heavy paint layers, ensuring speed, consistency, and safety. Blastman provided an automated blasting solution that transformed their operations.
Streamlining production with Blastman’s automated blasting system
Before implementing the robotic blasting system, Muijs relied on manual blasting,
which limited their daily output to just two containers. Since integrating Blastman’s technology, production has surged dramatically. “Now, we are blasting around 15 to 20 containers per day, and if we want, we could handle even more,” says Leko
The transition to automation came with a learning curve; however, the ability to fine-tune processes allowed Muijs to achieve optimal performance fairly quickly.
“The first three months after the robot was installed, including a lot of trying and learning how to make programs. This is, of course, a challenge everyone faces, and already after 3–6 months, we had defined solid programs,” Muijs explains.
Blastman B20CX is an 8-axis gantry-type
robot with a control cabin. The robot is designed to replace manual blasting and is suited perfectly for non-serial and serial production. Automatic blast programs can be easily made by Blastman Studio.
Addressing challenges with Blastman’s expertise
Operating in an environment with old containers meant that dust accumulation posed a significant challenge. As Muijs’ blasting chamber was initially designed for blasting new workpieces, the system had to endure more dust than it was meant to. This caused, for example, the hoses to wear out quickly. “Blastman stepped in right away with tailored dust control solutions that resolved our issue. The situation was handled very quickly and efficiently,” Muijs recalls.
Blastman B20CX robot blasting container
Blastman B20CX is an 8-axis gantry-type robot with a control cabin. The robot is designed to replace manual blasting and is suited perfectly for non-serial and serial production. Automatic blast programs can be easily made by Blastman Studio.
New and used vibratory finishing machines and systems from 2 litres to 4000 litres
Finishing media; Ceramic, Plastic, Wood, Steel and Maizorb
Liquid / powdered / paste compounds
Abrasive finishing wheels
Vibratory separators / sieving machines and re-meshing service
Repairs and relines
Effluent water treatment systems
Redundant machines purchased
Consultancy
Subcontracted finishing and industrial sieving services
SHARMIC FOR FAST, FRIENDLY SERVICE
Experienced Engineers After sales technical support Nationwide deliveries
Sharmic Engineering Ltd
Tel: +44 (0)1299 822135 / 878123/4/5
Email: info@sharmic.co.uk www.sharmic.co.uk
Beyond technical solutions, Muijs emphasizes the value of reliable support.
“If I send them an email, I receive a response within a few hours. Sometimes, it might end up building into a chain
with 5–6 people sharing ideas with me, or with each other. I like that. What’s more, I always get a follow-up to ensure everything is fine. Problems are solved very fast with Blastman,” he states.
The value of aftersales support
Blastman’s commitment to customer success extends beyond installation. It’s after-sales services provide contracts either during projects or for existing customers, including scheduled maintenance, programming services, and any process-related assistance, as well as spare parts supply to enable customers to maximize uptime and system longevity.
Muijs Containerreparatie recently renewed their Service Contract, ensuring continued maintenance and spare parts availability. “Everything is running smoothly,” Leko Muijs notes, adding about the importance of cooperation.
“Some companies simply provide the machinery. Blastman’s approach goes beyond that—it’s about long-term partnership and operational reliability. For us, also, the procuring of new robots in the future is easier and faster because we already know we can lean on Blastman. That trust is crucial,” Muijs emphasizes.
Expansion of automated blasting
With Blastman’s aid, Muijs has doubled its painting capacity. Encouraged by the success of its robotic blasting system, Muijs has built a second painting chamber and is expanding its operations by building a third and creating new business.
“We are starting an extra company solely for blasting and painting metal structures,” Muijs reveals. The investment in automation has not only improved speed and quality but also enhanced workplace safety and employee well-being.
For Muijs Containerreparatie, Blastman Robotics has proven to be more than a supplier—they are a trusted partner in innovation and efficiency. With automation driving productivity and after-sales support ensuring reliability, Muijs is well-positioned for future growth.
Link to the video: https://youtu.be/aMQU6n34f0Q
For more information: Telephone: +358 20 7418 140 Email: sales@blastman.com Visit: www.blastman.com
Before and after blasting
Automated Water & Effluent Ltd
Get in touch for a quote today!
Automated Water & Effluent Ltd have been supplying process control equipment to the metal finishing and surface finishing industry.
We have an in-house team of qualified engineers able to design and build control panels and process equipment specifically to fit your requirements.
A wide range of our control instrumentation, dosing pumps and chemical process equipment is available on short delivery.
Affordably measures uncured powder coatings using non-contact ultrasonic technology to predict a cured thickness
Dedicated stand-alone unit is ready to measure right out of the box
Fast measurement speed—ideal for moving lines and swinging parts
Scan Mode continuously takes measurements—ideal for analyzing large areas
Storage of 999 readings with onscreen averaging. Stored readings can be downloaded to PosiSoft Desktop Software
Powder Inspection Kits
Complete solutions for measuring powder coating before and after cure are available
RAC® 5
ONE GUARDFOR ENO ROFDRAUG
RAC® X Tips
KEY BENEFITS
WIDE APPICATIONS
Use one guard for all your airless spraying needs — production, high-pressure, fine finish, low-pressure, wide-angle, line marking and more.
Insert two tips. On one side RAC® 5, RAC® XHD and SC-6 tips and on the other side RAC® X tips and switch instantly for speed and flexibility.
TECHNICAL HIGHLIGHTS
+ Pressure rated up to 530 BAR / 7,700 PSI
+ Fits RAC® 5, RAC® XHD, SC-6 and RAC® X tips
Engineered for convenience. TWINFIT® connects seamlessly to almost any professional airless spray gun. Tighten by hand or wrench to any 7/8” or 11/16” connection.
Only two seats and seals required. Our unique SealEx® 6 for RAC® 5, RAC® XHD, and SC-6 tips, and SealEx® 7 for RAC® X tips ensure reliable performance and perfect adaptability.
FIRST PAINTING
Maximize control, and protect the user: TWINFIT® is built to support professionals ‘under pressure’.
+ Perfect match for ExitFlex® Speedy 6 and Speedy 7 airless tips
+ Rugged, durable and ready for all-day use
COMBINE TWINFIT® WITH SPEEDY TIPS TO UNLOCK THE FULL POWER OF YOUR AIRLESS SYSTEM.
SPEEDY 6
VERSATILITY AT ITS CORE
+ Universal compatibility with all major airless systems and guards.
+ 715+ tip sizes for production, fine finish, line striping and more.
+ Ergonomic handle with built in seal and tIp positioning tool
+ Ideal for daily use with your existing equipment.
+ Perfect fit with TWINFIT® for seamless operation.
SPEEDY 7 TOP OF THE RANGE
+ Tip locking mechanism for extra safety on high-pressure jobs.
+ Designed for tough conditions - shipbuilding, heavy industry and more.
+ 715+ tip sizes, ergonomic excellence.
+ Perfect fit with TWINFIT® for optimal safety amd performance.
+ The go-to for heavy duty professionals demanding precision, protection and perfection.
Stainless
Glass Bead
Stainless Steel Cr and Cr/Ni. No 5, Queensway Link Industrial Estate
Stafford Park 17, Telford, Shropshire TF3 3DN
Tel: 01952 299777
Fax: 01952 299008 E-mail: sales@pometon.co.uk
•
•
•
• BARRELS - PROGALVANO ROTOR
• BARREL AUTO LOADING SYSTEMS
• PROGALVANO FILTERS
• SEMI/AUTOMATIC FILTER SYSTEMS
• CENTRIFUGAL DRYERS La ge Range)
• AUTOMATIC DRYING SYSTEMS
• ROTARY PAINTING/LAQUERING
• TOP COATING/SEALING SYSTEMS
• VIBRATORY POLISHING EQUIPMENT
• LUBRICATION EQUIPMENT
• RECTIFIERS Conventional & Pulse
• A/HOUR METERS & DOSING PUMPS
•
friction and protect against contamination
l Pre-treatments including Ti Anodising, Phosphate Conversion Coating and Chilled Iron
Thermal Fluid Heating Technology now for the future
Let‘s talk about powder coating. A technology that is proven since decades and actually, it‘s just getting started with FLOWSENSE. FLOWSENSE? It‘s a software masterpiece and a bunch of small sensors that do big things: Consistent powder output from the first to the last workpiece. Reliability, measured in real time. Put quality on repeat!
