AIR-ANT24120 Datasheet

Mounting the Antenna

The antenna is provided with a mounting kit. This kit allows you to mount the antenna to masts up to three inches in diameter. The antenna is vertically polarized. Since the antenna has vertical gain, it is very important to mount the antenna in a vertical (not leaning) position for optimal performance.

Follow these steps to mount the antenna to a mast.

Step 1 Position the sandcast bracket on the mast.

Step 2 Secure the sandcast bracket to the mast using two 5/16-18 U-bolts, split lock washers, and hex nuts.

Step 3 Use a 1/2 in. (13 mm) wrench to tighten each hex nut to full compression of the split lock washers.

Step 4 Slide the antenna in the sandcast bracket and align it so that the 1/4-20 hex bolts fit into the grooves on the antenna base.

Step 5 Use a 7/16 in. (11 mm) wrench to tighten the hex bolts until they secure the antenna to the sandcast bracket. Do not overtighten.

Step 6 Use a 7/16 in. (11 mm) wrench to tighten the 1/4-20 jam nuts. Do not overtighten.

Step 7 Connect the antenna's pigtail coaxial cable to the transmission line.

Suggested Cable

Specifications for Cisco Aironet Low-LossAntenna Cable

Get more information:

Do you have any question about the AIR-ANT24120?

Contact us now via e-mail: info@hi-network.com

Specific Data Sheet:

Want to Buy

Contact HI-NETWORK.COM For Global Fast Shipping

HongKong Office Tel: +00852-66181601

HangZhou Office Tel: +0086-571-86729517

Email: info@hi-network.com

Skype: echo.hinetwork

WhatsApp Business: +8618057156223