1 minute read
water strainer
6 Maintenance
Checking and cleaning the raw water strainer
Daily, before starting.
6 Checking the raw water strainer
• Check daily whether there is any dirt in the raw water strainer. • Close the seacock before removing the lid of the water strainer.
• Clean the raw water strainer as often as is necessary, depending on the pollution of the waterways, but at least once every 6 months. A clogged raw water strainer will result in excessive temperatures or overheating of the engine coolant. • Check the sealing between the lid and housing after cleaning and re-assembling the strainer. An improperly sealed lid will result in air sucked in by the sea water pump which again will result in overheating of the engine.
