Removing the Mainboard

1. See “Removing the LCD Module” on page 70. 2. See “Removing the Upper Cover” on page 72. 3. See “Removing the Modem Module” on page 84. 4. Turn the lower base over on a clean surface, and disconnect the DC-IN cable as shown.

IMPORTANT:Ensure the cable can easily pass through the lower cover during mainboard disassembly.

5. Turn the base rightside up, and disconnect the bluetooth cable from the bottom right of the mainboard as shown.

Step

Size

Mainboard M2.5*9 (NL) Green call out

Mainboard M2.5*3 (NL) Red call out 1

1

Quantity Screw Type

7. Lift the mainboard to expose the DC-IN jack and USB cable.

8. Remove the DC-IN jack and USB cable as shown.

CAUTION: Ensure the I/O ports at the bottom of the mainboard are clear of the bottom base to prevent damage to the mainboard.