1 minute read
Boot Options
Users can press F12 during POST to enter the Boot Options Menu. In this menu users can change boot device without entering BIOS SETUP utility.
NOTE: There are three priorities that can let the user to specify the boot device sequence. The priority of options from top to bottom is 1st, 2nd, 3rd ,and 4th . If the Removable Device or Hard Drive option has multi devices, show ‘+’ in front of option and show each device information. Help: Keys used to view or configure devices: <e> expands or collapses devices with a + or <p>and <q> moves the device up and or down.
PhoenixBIOSSetup Utility
Information Main Advanced Security Boot Exit
+Removable Devices +Hard Drive CD-ROM Drive D2D Recovery Item Specific Help
Keys used to view or configure devices: <Enter> expands or collapses devices <F5> and <F6> moves the device up or down.
This menu contains exit options.
The following table describes the parameters in this screen. Setting in boldface are the defaults and suggested parameter settings.
Load Setup Default
If you want to restore all parameter settings to their default values, select this menu item and press e. The following dialog box displays.
PhoenixBIOSSetup Utility
Information Main Advanced Security Boot Exit
Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Item Specific Help
Exit System Setup and save your changes to CMOS.
Parameter Description
Exit Saving Changes Save any changes, and exit BIOS setup. Help: Exit System Setup and save your changes to CMOS. Exit Discarding Changes Discard any changes, and exit BIOS setup. Help: Exit utility without saving Setup data to CMOS. Load Setup Defaults Load Setup Defaults. Help: Load default values for all SETUP items. Discard Changes Discard any changes. Help: Load previous value from CMOS for all SETUP items. Save Changes Save changes. Help: Save Setup data to CMOS.
Do you want to load default settings? [Yes] [No]
If you would like to load factory- default settings for all parameters, use the cursor z / x keys to select Yes; then press e. Choose No if otherwise.
