1 minute read
Normal Engine Stopping
Normal Engine Stopping
Side-Mount Type
Panel-Mount Type Top-Mount Type
N (neutral)
CONTROL LEVER
N (neutral)
CONTROL LEVER N (neutral)
CONTROL LEVER
1.Move the control lever to the N (neutral) position.
After cruising at full throttle, cool down the engine by idling for a few minutes before stopping the engine.
OPERATION
OPERATION
Side-Mount Type
Panel-Mount/Top-Mount Types
OFF
IGNITION SWITCH KEY
OFF
2.Turn the ignition switch key to the
OFF position to stop the engine.
In the event that the engine does not stop when the ignition switch key is turned to the OFF position, pull the emergency stop switch clip out of the emergency stop switch by pulling the emergency stop switch lanyard (p.60).
3.When the boat is not in use, remove and store the ignition switch key and the emergency stop switch clip and lanyard. If you are using a portable fuel tank, disconnect the fuel hose if you will be storing or transporting the outboard motor.
