Engine Oil

STORAGE

4.With the outboard motor turned to the starboard side, tilt the outboard motor up. Keep the end of the drain hose below the level of the vapor separator drain screw, and watch for the fuel to start flowing out the drain hose.

5.After the fuel starts flowing out the drain hose, tilt the outboard motor down and allow the vapor separator to finish draining.

6.After draining thoroughly, tighten the drain screw securely.

7.Clip the drain hose on the head cover.

8.Drain the fuel tank into an approved gasoline container.

Engine Oil

1.Change the engine oil and the oil filter (p. 64 – 66).

2.Remove the spark plugs (p. 68), and remove the emergency stop switch clip from the emergency stop switch.

3.Pour 1 – 2 teaspoons (5 – 10 cm3) of clean engine oil into each cylinder.

4.Rotate the engine a few revolutions to distribute the oil in the cylinders.

5.Reinstall the spark plugs (p. 70).