1 minute read
Stop Switch
CONTROLS AND FEATURES
Turning the ignition switch key to the START position starts the engine. The key automatically returns to the ON position when released from the START position.
The engine will not start unless the gearshift/throttle control lever is in the N (neutral) position (p. 41) and the emergency stop switch clip is in the emergency stop switch.
Turning the ignition switch to the OFF position stops the engine.
EMERGENCY STOP SWITCH
EMERGENCY STOP SWITCH CLIP EMERGENCY STOP SWITCH LANYARD
The emergency stop switch clip must be inserted in the emergency stop switch in order for the engine to start and run. The emergency stop switch lanyard must be attached securely to the operator or to the operator’s PFD (Personal Flotation Device).
When used as described, the emergency stop switch clip and emergency stop switch lanyard system stops the engine if the operator falls away from the controls.
A spare switch clip (optional equipment) can be stored in the tool bag.
