ENGINE START AND STOP

Tigercat 1055B/1075B/1085B Forwarder

SAE STANDARDS FOR MACHINE OPERATOR PROTECTIVE STRUCTURES

THE OPERATOR ENCLOSURE FOR THIS MACHINE MEETS THE FOLLOWING STANDARDS:

• ISO 8082:2003 (Roll Over) Maximum Machine Mass 29 869 Kg/ 65,850 Lb • ISO 8083:2006 (Falling Object) • ISO 8084:1993 (Operator)

MODIFICATIONS AND REPAIRS

The integrity of the Roll Over, Falling Object, Operator protection structure and its continued ability to provide the level of protection it was designed for could be seriously affected by any modifi cations to the structure, its mounting or to the chassis to which it is attached. Tigercat emphasizes that the certifi cation of approval of the Roll Over, Falling Object and Operator protection structure will become void if any such modifi cations take place. Tigercat may offi cially grant approval for modifi cations only by: i) Written approval of repairs or modifi cations signed by the Tigercat Engineering Manager; or ii) Approved modifi cations offi cially released by Tigercat. Both of the above are provided that the work is carried out in the factory approved manner. Unauthorized modifi cations and/or repairs made or contributed to by a customer or a Tigercat distributor may result in creating a dangerous situation and therefore the customer or Tigercat distributor will be considered to have assumed the risk involved or be negligent in creating this situation. Tigercat will not be held responsible for situations arising from having created unauthorized modifi cations/changes to the structure. Operator's cabs are designed to Roll Over, Falling Object and Operator protection standards so that they will withstand force and absorb energy during a roll over, when resisting the impact of a falling object and minimize the possibility of operator injury from penetrating objects. When a permanent defl ection of the structure occurs, the structure can no longer provide the original designed level of protection and should be replaced. Attempts to straighten the structure, particularly by the application of heat, can reduce still further the structures remaining capability to protect. Use only the recommended adhesive for fastening windows. Operator protection standard requirements may not be met if an adhesive other than the one recommended is used. Replace windows only with factory approved parts. The mounting and the frame or chassis to which the cab is attached is considered an integral part of the Roll Over, Falling Object, Operator protection structure and is included in the design, test and certifi cation of the product. Contact the Tigercat Service department before attempting any modifi cations or repair to roll over protective structures.

Tigercat Industries Inc.

PROTECTIVE STRUCTURES CERTIFICATION FOR USE ON ALL Tigercat 1000 SERIES MACHINES THIS OPERATOR ENCLOSURE

MEETS THE FOLLOWING

PROTECTIVE STRUCTURE STANDARDS:

ISO 8082:2003 (Roll Over)

Maximum Machine Mass 29 869kg / 65,850lb ISO 8083:2006 (Falling Object)

ISO 8084:1993 (Operator)

TO MAINTAIN OPERATOR PROTECTION AND PROTECTIVE STRUCTURES CERTIFICATION • All damaged protective structures must be replaced, not repaired. • Any alterations must be approved by manufacturer.

MANUFACTURED BY Tigercat Industries Inc.

Brantford, Ontario, Canada