Towing

2- AIR LOUVERS / AIR CONDITIONER

The air louvers (A) turn 3600 are adjustable for desired air flow directions.

3- WINDSCREEN WIPER

To replace front and rear wiper blades (A), raise blade support arm, loosen the blade from the lock pin and remove the blade. Assemble in the reverse order of disassembly.

4- CAB INTERIOR LIGHT

The light is attached to the cab roof. Steady light (C) is switched on by depressing switch (1), and the swivel light (D) is switched on by depressing switch (2). OPERATION RELATED WARNING

WARNING

Always check the working area to prevent injuries. Some hazardous working areas are as follows: ramps, ravines, logs, wreck work, fire, high walls, embankments, excavation work, traffic, crowded parking lots and closed spaces. Extreme care should be taken in such areas.

Care should be taken on land edges that may slide, sliding areas and falling objects. Care should be taken with shrubbery, tree limbs and other hidden obstacles.

During night time operation, keep all machine lights turned on. Check for burnt light bulbs, replace them immediately.

Always switch off the engine when leaving the operator´s seat.

Prior to moving machine and attachments, ensure all people in the area are away from the unit. Take an inspection walk around the machine prior to climbing up and sound the horn.

Do not start at full power when towing using a trailer chain or rope. Pull with care.

Check for leaks in the exhaust system under the hood. when operating inside an enclosed cab, leave the breather open to provide air circulation during the entire operating time.

Keep from using the brakes continually on long down grades. Choose the most appropriate gear going down.

Keep the engine exhaust pipe free from combustible debris. Switch off the engine prior to cleaning it.

Keep all people away from all attachments and tools while these are in the raised position.