1 minute read

4.1 General information

4.1 GENERAL INFORMATION

WARNING

Read, understand and follow all safety precautions contained in this manual before performing any inspection or maintenance procedures on this machine, its systems or components.

A.It is recommended by the Manufacturer, that an inspection and maintenance schedule be developed and maintained on a regular basis for this machine. Developing and maintaining such a schedule, helps to keep the machine in optimum operating condition. B.The information contained in this section gives the proper procedures for performing inspection and maintenance functions for this machine. Use these procedures when performing inspection and maintenance as they will guide the technician step by step for each procedure. Also, refer to the Inspection and maintenance charts for general service interval recommendations. C.Basically, lubrication and maintenance intervals are determined by the hour meter. If performing lubrication and maintenance according to calendar time is preferred, the hour meter reading corresponds to the lubrication and maintenance period (daily, weekly, monthly, etc.) in calendar time; thus calendar time can be used. Items for which service time cannot be specified are explained in the section WHEN

REQUIRED.

NOTE: The inspection and maintenance charts provided in this section give only general time intervals. It may be necessary to develop a custom schedule to perform machine maintenance at more frequent intervals based on the work conditions such as severe applications, work in dusty or humid circumstances, etc.

D.Use only original oils, fluids, lubricants, filters and replacement parts to keep machine in optimum operating condition.

Furthermore, use the oils and greases with the specified viscosity depending on the ambient temperature. • Store the vessels and containers indoor for the oils, fluids and greases, taking suitable measures to prevent them from invading dust, water, etc.

NOTE: Make sure to consult with your Dealer for the adjustment, disassembling and repair.

F1478

This article is from: