Electrical Rear Lights Connection (Option)

O-Ring Table — Male Boss Fittings

O-Ring Table — Air Conditioning Fittings

O-Ring Table — Face Seal Fittings

Use these torque values when tightening hydraulic, fuel, or coolant adapters (fittings).

SAE "O-Ring" Boss (Steel) Adapters

JIC 37º and 45º (Machined or Flared) Adapters

Use these torque values when tightening hardware—excluding: lock nuts, thread-forming, self-tapping, and metal screws—unless otherwise specified.

All torque values are in Foot-Pounds and Newton Meters (Nm).

Use these torque values when tightening hardware—excluding: lock nuts, thread-forming, self-tapping, and metal screws—unless otherwise specified.

NOTE: All torque values are in foot-pounds (lb.-ft.), except those marked with asterisks (*), which are in inch-pounds (lb.-in.). To convert lb.-ft. to Newton Meter (Nm)—metric—torque values, multiply the lb.-ft. value by 1.355, or for inch pounds, multiply the lb.-in. value by 0.113.

*Value shown is in pound-force inch (lb.-in.)—inch pounds.