2500RT - LOADER ARM HYDRAULICS

HIGH-FLOW HYDRAULICS CIRCUIT - (OPTION) SN 080300 and before

01100541CLAMP, HOSE 1.00 IN. TWIN1

This comes from the supplier with two cushions, one top plate, and one 5/16"X1-3/4" bolt. The top plate and bolt are substituted with items 2 and 4 at the factory. Be sure to order items 2 and 4, if needed.

02079098PLATE, TOP1

(not included with item #1)

03136226CLAMP, HOSE .075" x 0.41"1

04650733CS 5/16x2-1/2" C5ZY1

(not included with item #1) 05274114HOSE,

HOSE CONNECTION: #01 connects to right-side drive motor #02 connects to right-side drive motor #03 connects to pilot pressure manifold (P) #08 connects to hydraulic cooler (lower tee) #15 connects to left-side drive motor #16 connects to left-side drive motor #21 connects to pilot pressure manifold (DR) connects to hydraulic cooler (upper port) — connects to steel tube on early machines or directly to the cooler on later machines).

MP6 x 75.0 IN.

(connects to auxiliary hydraulics--loader arm left side)

MP4 x 67.0 IN.1

(connects to hydraulic main valve-bottom TEE) option on early-series machinesconnects to hydraulic cooler upper port)