PRIMARY CHECKUP

Checking Engine Oil Level

 Check the engine oil before starting the engine or ‘5’ minutes or more after the engine has stopped.

 To check the oil level, draw out the dipstick, wipe it clean, insert it and draw it out again. Check to see that the oil level lies between the two marks.

 Add oil only when the oil level reaches the lowest mark.

Caution -Do not run the engine if the oil level is low than specified.

Checking Coolant Level

 Check coolant level in recovery bottle & Top-up if required.

 Use redimix coolant for top up.

Warning -Do not open the coolant cap when the engine is hot. Do not remove the radiator cap when the engine is hot

Checking Radiator Fins

 Clean chaff guard daily or earlier if chocked.

 Blow compressed air through the radiator fins to remove foreign material

Caution -To avoid personnel injury, ensure to stop the engine before working on radiator.

Checking Radiator Fins

 The tension is correct when the belt can be pressed by thumb to 9 - 12 mm. midway between the two pulleys without much effort.

 In case the tension is not correct then adjust the tension by adjusting alternator position on brace plate.