Foreword

This operator's manual has been written for the operator and for the maintenance staff of the machine.

It contains the descriptions for:

- Chapter 1 "Product description"

- Chapter 2 "Safety guidelines"

- Chapter 3 "Control, operation"

- Chapter 4 "Malfunctions"

- Chapter 5 "Maintenance"

The operating instructions must be read and used carefully by all persons who carry out work with or on the machine before putting the machine into service for the first time and later, at regular intervals.

Work with or on the machine includes, for example:

- Operation including set up, troubleshooting during work procedure, disposal of production wastes, care, disposal of service and auxiliary materials.

- Service including maintenance, inspection and repair work

- Transport or loading the machine

This allows the machine operator to familiarize himself with the machine more easily and prevent malfunctions due to improper operation.

Observation of the operating instructions by maintenance personnel:

- increases reliability in use

- extends the service life of your machine

- reduces repair costs and downtime

The operating instructions belong with the machine. Make sure that a copy is always readily available in the operator's cab.

The operating instructions should be supplemented with instructions for accident prevention and environmental protection based on existing national regulations.

In addition to the operating instructions and legally binding regulations on accident prevention which apply in the user country and at point of use, authorized specialist rules for safe and correct working procedures are also to be observed.

These operating instructions contain all required information for control, operation and maintenance of your machine.

Some illustrations in these operating instructions may depict details and working devices which differ to your machine.

In some illustrations, protective devices and covers have been removed in the interests of better presentation.

Improvements, which are always being incorporated into our machines, may result in changes to your machine which are not yet indicated in these operating instructions.

If you need additional explanations or instructions, please don't hesitate to contact the Technical Documentation and Service Department.

Under extreme conditions, more frequent maintenance than specified in the inspection checklist may be required.

Liability and warranty

Due to the variety of products offered by other manufacturers (for example service items, lubricants, attachments and spare parts), Liebherr cannot check the suitability and error-free function of third party products in or on Liebherr products in general. The same applies for possible interactions of third party products with Liebherr products.

The use of third party products in or on Liebherr machines is at the discretion of the user. Liebherr denies any warranty or liability for damages of any kind for failures or damages on Liebherr machines, which were caused by use of third party products.

In addition, Liebherr will not approve any warranty claims, which occurred due improper operation, insufficient maintenance or non-observation of safety guidelines.

Modifications, conditions, copyright

- We reserve the right to make changes to technical details on the machine in comparison to the information and illustrations in this manual.

- The warranty and liability conditions of Liebherr's general business conditions will not be expanded by the above information.

- The information and illustrations contained in these operating instructions may neither be copied and distributed, nor used for the purposes of competition. All rights are expressly reserved in accordance with copyright laws.

- Machine data: Component relevant machine data is recorded in part by the system. The saved data is used by the manufacturer for continued improvement of function and reliability. copyright© Liebherr-Well< Telfs