Control and operation

Working with the machine

Semi-automatic flap closing (if installed)

A Joystick

B Joystick with analog stick (if installed)

Push the button S6L left on the down of the right joystick 3 Shovel flap will be closed automatically with full speed.

Push the button S6L again during semi-automatic flap movement. Shovel flap movement will be stopped.

Note!

If you keep the button S6L pushed, the semi-automatic flap closing movement will not start.

If you operate the shovel bucket pedal 7a or 7b during semi-automatic flap closing movement, the automatic movement will be stopped and flap control is switch to manual operation through pedals 7a and 7b

Deactivation of the attachment damping system

The damping system stops the movement of the attachment before the cylinders get suddenly the end position of the piston rods. If necessary, the deactivation of this protection is possible.

Fig. 3-82 Deactivation of attachment damping system

Move the attachment until the damping system stops it. The cylinders are in their end stroke position. Let the two joysticks and pedals in neutral position. Press down the rocker switch S55 on the left joystick 4. The attachment damping system is off.

Caution!

Repetitive movements without the damping system cause fast wear of the components.

Move back the attachment to automatically start the damping system back.

Control of the quick coupler (optional)

Danger!

Additional operating and control elements (joysticks/pedals) can have different functions.

Always check functions of operating and control elements when you start a machine which has an additional attachment. manufacturer.

Danger!

Special tools used for hoisting are subject to specific conditions and must be fitted with special safety devices.

For further information, refer to the Oper ufacturer.

For use and control, refer to the Operator