Control and operation

Operating and control elements

Fig.

Submenus:

Time

This submenu is used to set the time.

Wiper

This submenu is used to set the windscreen wiper interval.

Brightness

This submenu is used to set the luminescence of the display.

Language

This submenu is used to set the language in which the error codes are written.

Set a parameter

From each submenu of the menu "Settings": Push the safety lever up.

Push the "Up" and "Down" buttons to select the parameter to set (time, value or language).

Push the "Accept" button to record the new parameter.

Submenu "Time"

You can also use this submenu to switch from summer to winter time (and back again).

Push the "Daylight" button.

This symbol is transparent when the time difference of an additional hour is deactivated.

This symbol is green when it is activated.

Submenu "Brightness"

To use this submenu, you must before select the manual mode. Push the "AUTO" button.

Each time you push this button, the status light related to the selected mode comes on.

Indicator and error warning symbols

The symbols which are shown on the main screen give information about the conditions, the setting and the possible malfunctions of the machine. There are two types of symbols: indicator symbols which are shown in the field 1. error warning symbols which are divided into two groups: electric motor error symbols shown in the field 3 other error symbols shown in the field 2

1 General indicator symbols