Control, operation

Fig. 3-11 Info hours menu

The menu shows the operating hours of individual machine components.

hours-day: Daily operating hours counter (can be reset with ENTER key).

hours-rpm: Operating hours of three speed ranges (low, medium, high) hours-sensor: Operating hours with "automatic speed adjustment" during which the respective pilot control units were used. hours-drive: Operating hours in travel mode sensor control: Adjustment of time after (in seconds) which the diesel engine is automatically slowed to idle speed, if no pilot control unit has been actuated.

Menu navigation:

Use the UP and DOWN keys to select the desired submenu (black bar).

Press the ENTER key to confirm your selection. The display shows the selected submenu. Press the RIGHT key. The display shows the subordinate menu.

The menu shows the status of individual inputs and outputs of the control system.

IO-Master: control system (master); values of inputs and outputs

IO-Slave: control system (slave); values of inputs and outputs var-master: control system (master); variables and operating data

Menu navigation:

Use the UP and DOWN keys to select the desired submenu (black bar).

Press the ENTER key to confirm your selection. The display shows the selected submenu. Press the RIGHT key.

Info Software

The menu shows the software versions used.

M: Master control version/ S: Slave control version/ D: Display control version.

Menu navigation: Press the RIGHT key. The display shows the subordinate menu.

Cyl. extern (optional equipment)