1. STRUCTURE [1]

2wd

(9)Oil

(13)Knuckle

The front axle of the 2WD is constructed as shown above. The shape of the front axle is relatively simple, and the front axle is supported at its center with the front axle brackets (15), (16) on the front axle frame (3), so that steering operation is stable even on an uneven grounds in a farm field.

The front axle of the 4WD is constructed as shown above. Power is transmitted from the transmission through the propeller shaft (24) and to the spiral bevel pinion shaft (21), then to the spiral bevel gear (5) after that to the differential gear.

The power through the differential is transmitted to the differential yoke shaft (4), and to the bevel gear shaft (15) in the bevel gear case (1).

The revolution is greatly reduced by the bevel gears (17), (13), then the power is transmitted to the axle (12). The differential system allows each wheel to rotate at a different speed to make turning easier.

9Y1211121FAM0002US0