1.4 DELIVERY OF THE SHOVEL

The Shovel is being delivered disassembled into its main components.

For assembling the Shovel refer to the separate Manual ”Assembly Procedure” in Volume 2 Binder.

WARNING

Personnel entrusted with work on the machine must have read the Assembly Manual, the Operation,- Lubrication- and Maintenance Manual and in particular the section on safety before beginning work. Reading the instructions after work has begun is too late.

If there are any questions concerning the assembling procedure, contact your local Service Center.

Prior to first operation, inspect the Shovel thoroughly with the Service Engineer responsible for the erection of the machine. Check all fluid levels according to the Lubrication and Maintenance Schedule.

Damages and defects caused by incorrect operation and maintenance are not covered by the manufacturers guarantee.

NOTICE If the Shovel is equipped with a fire suppression system, make sure that the system is ready for operation.

SPARE PARTS

For your spare part orders refer to the Parts Catalogue.

In order to keep your Shovel in first-class operating condition use only genuine spare and wear parts.

The use of any part other than the genuine part releases the

KOMATSU MINING GERMANY GmbH from any guarantee.

SERVICE

For all questions related to your Shovel please contact your local Service Center.

In all your written or phoned inquiries please indicate the model and serial number of your Shovel.