Anti-vibration system

WARNING! The fuel that is used in the chainsaw poses the following hazards: 1. The fluid and its fumes are poisonous. 2. Can cause skin irritation. 3. Is highly inflammable.

Dismantling

1. Remove the following components: • Chain and guide bar. See instruction book. • Cylinder cover. See instruction book. • Tank unit. See page 35.

2. Detach the springs from the cylinder with the help of a 4 mm Allen key. See fig. 1.

3. Detach the springs from the tank unit with service tools 502 52 18-01 and 502 52 18-02. See fig. 2.

Cleaning and inspection

Clean and inspect all parts.

Reassembly

1. Use pliers to attach the springs to the tank unit.

2. Attach the springs to the cylinder with the help of a 4 mm

Allen key. See fig. 1. Tighten the bolts to 10 Nm.

3. Refit the following components: • Tank unit. See page 36. • Cylinder cover. See instruction book. • Chain and guide bar. See instruction book. Fig. 1

Fig. 2