V. OPERATING INFORMATION

The gland packing (fig. 5.41, item 1) may require adjustment during start-up. If adjustment is required, shut off the agitation system and adjust the gland nut (fig. 5.41, item 2).

(reference to direction when seated in the operator’s seat facing forward).

The agitator motors for the polyethylene tanks are held in place with a motor mount yoke (fig. 5.41, item 3). The yoke tap must extend through the motor mounting plate (fig. 5.41, item 4). This allows the motor to float with the agitator shaft.

DO

When replacing the packing, be sure to wrap the packing clockwise on the agitator shaft

NOTE:

Damage will occur to the agitator system if the motor mounting yoke is not properly installed in the motor mounting plate.