1 minute read
V. OPERATING INFORMATION
1. Check the engine oil level. Do not operate the engine when oil is below the low mark on dipstick.
2. Check the coolant level in the radiator and the coolant overflow reservoir.
3. Check the hydraulic oil reservoir level.
4. Check cooling air intake screens.
5. Check engine drive belt.
6. Drain fuel/water separator.
7. Check the Filter Minder ® .
8. Check for any oil or fuel leaks and correct if needed.
Starting the Engine
1. Position hydrostatic control lever to “N” (neutral) position.
2. Put the parking brake switch to the “ON” position (see page 30). When starting procedure is complete, return switch to “OFF” position.
3. Turn key to the “ON” position to check instruments.
