1.1 Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Operating instructions Part 1 – Driving

Serial number

3 112 428 en

19.02.2008

Important note

Any type of duplication or excerpt from this document, also in electronic form, is not subject to the revision service of Manitowoc Crane Group Germany GmbH.

© Copyright reserved by Manitowoc Crane Group Germany GmbH

The passing on or duplication of this document as well as the utilisation and disclosure of its contents are prohibited unless expressly permitted. Infringement will incur liability for compensation. All rights pertaining to registration of patent or utility model are reserved. The original language of this document is German.

Position of controls

Additional page Controls for crane cabin heating

Differing slightly from the details in the operating instructions, depending on the version, the position and function of the controls may change. This additional page shows you the changed position of the controls.

Function

1 Air-conditioning system1) à Operating instructions 2 Setting fresh air/recirculated air/mixed air à Function, p.2 3 Setting the fan à Function, p.2 4 Air distribution à Function, p.2 5 Setting the temperature à Operating instructions

1) Additional equipment

s

Function

Setting fresh air/recirculated air/mixed air

You can set the air to be sucked in by the fan. • Turn the switch (1) to the position for A Recirculated air – air is sucked in from the driver's cab.

Change to fresh air often to ensure that oxygen is supplied. B Fresh air – outer air is sucked in. C Mixed air – outer air and air from the driver's cab is sucked in.

The percentage of the corresponding air type is increased continuously by turning the switch in direction (B) or (A).

Setting the fan

• Turn the switch (2) to the required level 1 to 3, depending on the desired air quantity.

Air distribution

You can allow the air to flow out from various air vents.

• Turn the switch (4) to the position for the required air vents.

A Air vents (1), (2), windscreen, centre B Air vents (3), cab floor C Air vents (1), (2), (3)