Chapter 7 LUBRICATION WARNING

NEVER lubricate or service this unit when any part of the machine is in motion. ALWAYS exercise the MANDATORYSAFETYSHUTDOWN PROCEDURE (SAFETY chapter) before lubricating or servicing this equipment.

NOTE: The MAINTENANCE chapter in this manual has provisions for recording the dates and hourmeter readings after lubrication or other service has been performed; use those spaces to keep a log for maintaining a current service interval record. Proper routine lubrication is an important factor in preventing excessive part wear and early failure.

Lubricants

The chart on this page lists the locations, temperature ranges and types of recommended lubricants to be used when servicing this machine. Also refer to the separate engine manual for additional information regarding recommended engine lubricants, quantities required and grades.

NOTE: Refer to “Operator Services” in the SERVICE AND STORAGE chapter of this manual for detailed information regarding periodic checking and replenishing of lubricants.

Hydraulic System Reservoir

Use Mobil DTE 15M, or an equivalent that contains anti-rust, anti-foam and anti-oxidation additives and conforms to ISO VG46.

Capacity:

47 Gallons (178 liters)

All Grease Fittings

Use No. 2 Lithium-based Grease

Engine Crankcase Oil

Ambient TemperatureGrade* -22°F - 86°F(-30°C - 30°C)SAE 5W-30 -4°F - 104°F(-20°C - 40°C)SAE 10W-40 5°F - 122°F(-15°C - 50°C)SAE 15W-40

*API Service Classification: CH-4/Cl-4

*API Service Classification for first 100 hours on new or rebuilt John Deere engines: CC or CD

Capacity:

14 Quarts (13.3 liters)

Axle Gear Oil

Use API-GL-5 80W-90

Differential Capacity: 3.4 quarts (3.22 liters)

Planetary Capacity (each side): 1.3 quarts (1.2 liters)

Transmission Oil

Use Sunco Multi-ATF or equivalent

Capacity: 24 quarts (23.0 liters)

Brake System

DOT-3 Brake Fluid