Carriage Forks

1 2 10 3 4 11 5 6 12 7 13 8 14 9 15

42” Long

16 17 18 48” Long

19 20

48” Long 60” Long

Forks with 2” Shaft Bore

72” Long

60” Long

Forks with 2-1/2” Shaft Bore

72” Long 96” Long

Carriage Forks

WARNING

When ordering forks, select forks with a rating capacity that meets or exceeds the lifting capacity of the machine; failure to use the correct forks could result in injury or death. For more information contact your dealer (or manufacturer).

RS6 and RS8 Models Only RS10 and RS12 Models Only

Ref. Part Description Qty. Ref. Part No. No. Req. No. No.

Description Qty.

Req.

-- 2” FORK SHAFT DIAMETER --

(42” long) 01 L71350 FORK, 42”X4”X2” (8,400 lbs.) . . . . . 2

(48” long) 02a L61001 FORK, 48”X2”X2” (4,200 lbs.). . . . . 4 03 L61017 FORK, 48”X4”X2” (8,400 lbs.) . . . . . 2 04 L66406 FORK, 48”X4”X2-1/4” (12,000 lbs.). 2 05 L400929 FORK, 48”X5”X1-3/4” (8,500 lbs.). . 2 06 L47263 FORK, 48”X5”X2” (10,500 lbs.) . . . . 2

(60” long) 07 L47265 FORK, 60”X5”X2” (10,500 lbs.) . . . . 2 08 L60961 FORK, 60”X6”X2-1/4” (12,500 lbs.). 2

(72” long) 09 L68331 FORK, 72”X5”X2” (10,500 lbs.) . . . . 2

a Requires 2 sets (4 forks).

NOTE: Ratings for forks listed in the RS6 and RS8 Models Only column are based on two forks with a load center of 24”; except for item #2 where four forks are required.

-- 2” FORK SHAFT DIAMETER --

(48” long) 10bc L61001 FORK, 48”X2”X2” (4,200 lbs.) . . . . . 6 11 L66406 FORK, 48”X4”X2-1/4” (12,000 lbs.). 2 12 L47263 FORK, 48”X5”X2” (10,500 lbs.) . . . . 2

(60” long) 13 L47265 FORK, 60”X5”X2” (10,500 lbs.) . . . . 2 14 L60961 FORK, 60”X6”X2-1/4” (12,000 lbs.). 2

(72” long) 15 L68331 FORK, 72”X5”X2” (10,500 lbs.) . . . . 2

-- 2-1/2” FORK SHAFT DIAMETER -(48” long) 16d L61001 FORK, 48”X2”X2” (4,200 lbs.). . . . . 6 17d L71159 FORK, 48”X6”X2” (12,600 lbs.) . . . . 2

(60” long) 18d L71160 FORK, 60”X6”X2” (12,600 lbs.) . . . . 2

(72” long) 19d L71161 FORK, 72”X6”X2” (12,600 lbs.) . . . . 2

(96” long) 20d 210736 FORK, 96”x5”x2-1/4” (12,000 lbs.) . 2

b Requires three sets (6 forks). c Used ONLYon RS10-44 and RS10-55 models. d Used ONLYon RS12-42 model.

NOTE: Ratings for forks listed in the RS10 and RS12 Models Only column are based on two forks with a load center of 24”; except for items #10 and #16 where six forks are required.