INTRODUCTION

The information in this manual was written to give the owner/operator assistance in preparing, adjusting, maintaining and servicing the Radio Remote Boom Control. More important, this manual provides information on the safe and proper use of the Radio Remote Boom Control System. Major points of safe operation are detailed in the SAFETY chapter of this manual.

Be sure to read and understand the contents of this manual COMPLETELY and become familiar with the Radio Remote Boom Control System BEFORE operating it.

This Radio Remote Boom Control System allows the operator to remotely start the engine and operate the boom lift, lower, extend and retract functions. The operator can position a loaded attachment or raise personnel in an approved work platform from a safe position outside the operator’s station or from within the work platform. Lift personnel only with an approved work platform, and in full compliance with the “Mandatory Work Platform Safety Rules” (see SAFETY chapter).

The use of this Radio Remote Boom Control is subject to certain hazards that cannot be eliminated by mechanical means, but only by the exercise of intelligence, care and common sense. It is therefore essential to have competent and careful operators, who are not physically or mentally impaired, and who are thoroughly trained in the safe operation of the Radio Remote Boom Control and the handling of the loads.

A storage pocket in the back of the seat of the telescopic handler is provided for storing this manual. After using the manual, please return it to the pocket and keep it with the unit at all times! If the machine is resold, give this manual to the new owner.

The manufacturer reserves the right to make changes or improvements in the design or construction of any part without incurring the obligation to install such changes on any unit previously delivered.

In cooperation with the Society of Automotive Engineers, this