ISO-Style (used Internationally) Safety Decals inside the ROPS/FOPS

Safety alert: Always follow “Mandatory Safety Shutdown Procedure” in Operator’s Manual.

1 – Lower equipment to ground.

2 – Reduce throttle, stop engine.

3 – Apply parking brake; remove key.

4 – Check safety interlocks.

Safety alert: Read Operator’s Manual and all safety signs before using machine. The owner is responsible to ensure all users are instructed on safe use and maintenance.

Safety alert:

A – Check machine before operating; Service per Operator’s Manual. Contact dealer (or manufacturer) for information and service parts.

B – Maintain 3-point contact during entry and exit.

C – Inspect work area. Avoid all hazards. Look in direction of travel. Keep children and bystanders away.

D – Start and operate machine only from seat.

E – Keep away from power lines; avoid contact.

F – Wear any needed Personal Protective Equipment. Do not wear loose clothing while operating or servicing machine.

A – Crush hazard: Keep out from under lift arm unless lift arm is supported.

B – Crush hazard: Keep hands, feet and body inside cab when operating.

C – Forward tip hazard: Fasten seat belt. Carry load low. Do not exceed Rated Operating Load.

D – Side tip hazard: Avoid steep slopes and high speed turns. Travel up and down slopes with heavy end uphill.