Attachments

The Frontier Mulch Finisher is adaptable to many uses and needs. The following attachments can be ordered to meet your specific needs.

Drawbar and Electric Lift Attachment (MF1204 Only)

The MF1204 can be ordered as a tractor 3‐point hitch unit or a utility vehicle pull ‐type unit. Additionally, any MF1204 3‐point machine can also be converted to a pull ‐type machine with this attachment. The kit includes a drawbar for a 2” ball hitch, drawbar receiver and hardware, electric lift jack, control box, and wheel assembly (see below).

Pull‐Type Components

S‐Tine Toolbar Attachment (MF1204 3‐point Unit Only)

The MF1204 comes standard with only ONE toolbar equipped with three S‐Tines. The tractor 3‐point machine can be equipped with this second toolbar attachment, which comes with two S‐tines and the same compliment of sweeps, chisels, and turning tips as the base machine. This second toolbar slides into the frame receivers that are in front of the existing toolbar. This attachment will NOT work on the pull ‐type machine because the wheel assembly mounts in these receivers (see next page).

Second S‐Tine Toolbar

Frame Grating Kit (MF1206 and MF1208 Only)

The framework of the MF1206 and MF1208 is set‐up from the factory with brackets to attach two metal grates. These are very handy to haul seed, tillage components, weight, etc. on the Food Plot Seeder. Always secure whatever you are hauling with heavy straps.

Seeding Conversion Kit

To turn a Mulch Finisher into a seeding machine, you can order a kit that includes all of the seeding components found on the FP12 series Food Plot Seeder. This includes the rear sub ‐frame, seedbox(s), rear drag, and roller.

Rolling Basket Attachment

To further level and condition your seedbed, an optional rolling basket is available for all Mulch Finishers. It includes an aggressive, slat ‐type rolling basket to break up clods and move soil, as well as two springs to provide the necessary downforce.